| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix infinite loop in pcpu_freelist push with one possible CPU
__pcpu_freelist_push() can loop forever when only one CPU is possible
and an NMI re-enters pcpu_freelist_push() while the interrupted context
holds that CPU's freelist lock.
After the current-CPU fast path fails, the fallback loop walks
cpu_possible_mask while skipping the current CPU. With CONFIG_SMP=n, or
when an SMP kernel is limited to one possible CPU with nr_cpus=1 or
possible_cpus=1, there are no other possible CPUs to examine. The loop
therefore makes no lock acquisition attempt and can never make progress.
The following stack was observed on a UP system:
NMI context:
pcpu_freelist_push
free_htab_elem
htab_map_delete_elem
[perf-event BPF program]
__perf_event_overflow
perf_event_nmi_handler
exc_nmi
Interrupted context:
__pcpu_freelist_push
pcpu_freelist_push
free_htab_elem
htab_map_delete_elem
[raw_tp/sys_enter BPF program]
__bpf_trace_sys_enter
do_syscall_64
raw_res_spin_lock() detects the same-CPU recursive acquisition and
returns -EDEADLK, but the subsequent fallback loop has no candidate head
on a system with one possible CPU.
Restore the extra fallback head that existed before the rqspinlock
conversion. Keep the current-CPU fast path, then try the other possible
CPUs and finally the extra head. The additional head lets a push, which
cannot fail without losing a preallocated element, make progress when the
only per-CPU head is held by the interrupted context.
Also check the extra head from the pop path so that nodes placed there
can be reused. |
| A use-after-free vulnerability in the Linux kernel's af_unix component can be exploited to achieve local privilege escalation.
The unix_stream_sendpage() function tries to add data to the last skb in the peer's recv queue without locking the queue. Thus there is a race where unix_stream_sendpage() could access an skb locklessly that is being released by garbage collection, resulting in use-after-free.
We recommend upgrading past commit 790c2f9d15b594350ae9bca7b236f2b1859de02c (or backported equivalents). |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: atomically update mac addresses
When a MAC address is updated in batadv_dat_entry_add(), it is done using a
simple copy function. A parallel reader might only see parts of this
update. In worst case, the reader is transporting the half updated MAC
address over the network or is creating an ARP response using it -
poisoning the ARP cache.
atomic64_t can be used to store the 48 bit of a mac address. A reader will
then either see the old mac address or the new one - never a mixture of
both. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: avoid CRC corruption due to parallel claim add
batadv_bla_add_claim() is used to add claims and modify the backbone of
claims for CLAIM frames from remote backbones and local packets. When it
handles a claim, it needs to either
* add the new claim's CRC to the backbone CRC
* remove the already existing claim's CRC from the old backbone and add it
to the new backbone
But when the "new" claim code was running in parallel to the "change
backbone" code, it can happen that the CRC was invalid because the
backbone_gw of the claim was changed twice in the "new" claim code path:
* CPU0 creates the claim for gateway A and publishes it in the claim
hash. The crc16 of the address has not yet been added to A's crc at
this point.
* CPU1 processes a claim frame of gateway B for the same client, finds
the just published claim, and performs the ownership change: it
switches the pointer to B, removes the crc16 from A's crc - which
never contained it - and adds it to B's crc.
* CPU0 continues behind the creation branch, unconditionally switches
the pointer back to A without compensating B's crc (its remove_crc
is false for the creation path), and finally adds the crc16 to A's
crc
The CRC is then wrong for both:
* claim belongs to A: but CRC is not part of backbone A's CRC
* claim doesn't belong to B: CRC is still part of backbone B's CRC
This wrong CRC is never recomputated from the stored claims. For local
backbone claims, this can also not recovered using syncs.
To avoid this, split the functionality in clear separate parts:
* new claim which always adds claim CRC to the backbone CRC (but never
changes the already set backbone_gw of the claim back)
* update of existing claim which automatically changes the backbone_gw
entry and only updates both backbone CRCs when there was an actual change |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix recursive locking during device registration
i3c_master_register_new_i3c_devs() registers newly discovered devices
while holding i3c_bus_normaluse_lock(), a down_read(). device_register()
can immediately probe the device, and probe callbacks typically invoke
I3C helpers that take i3c_bus_normaluse_lock() again, leading to a
recursive acquisition of the same rwsem. rwsems do not support recursive
read locking and can deadlock when a writer is waiting. See the
"Recursive read locks" section of Documentation/locking/lockdep-design.rst.
For example, with Intel LPSS I3C, LOCKDEP generates a WARNING like:
# echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/unbind
# echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/bind
WARNING: possible recursive locking detected
kworker/5:1/94 is trying to acquire lock:
ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_device_match_id+0x45/0x370
but task is already holding lock:
ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_master_reg_work_fn+0x21/0x5f0
Fix this by separating device creation from device registration.
Populate desc->dev under the maintenance lock, collect the devices that
still need registration into a local list, then release the lock before
calling device_register(). Finally retake the lock and clean up any
devices that failed to register.
Use the maintenance lock rather than the normal-use lock while adding
device objects. A write-side maintenance lock prevents readers from
observing a partially initialized desc->dev during initial device
population, or desc->dev disappearing if registration fails.
The local list requires a list node, so add a list node member to struct
i3c_device. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate seg_id fields from persistent memory
cache_pos_decode(), cache_key_decode() and the last-kset branches of
cache_replay(), the writeback worker and the GC worker take a cache
segment id from the cache device metadata and index cache->segments[]
with it without checking it against cache->n_segs. That metadata is only
CRC-protected with a fixed public seed, so whoever supplies the cache
device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range
value forms a wild pcache_cache_segment pointer that is dereferenced and
written through -- an out-of-bounds read and write driven by on-disk data.
Add cache_seg_id_valid() and reject an out-of-range id at each decode
site, failing the operation with -EIO instead of indexing past the array.
Bound the id against the initialized-segment count (cache_info.n_segs)
rather than the physical device total. A forged cache_info.n_segs below
seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed
structs whose data pointer is NULL, so a forged id in that window would
still be dereferenced. A later patch guarantees cache_info.n_segs <=
seg_num, and a driver-created cache sets the two equal, so valid images
are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix use-after-free of master->this
sysfs attribute callbacks for the master controller device dereference
master->this. However, master->this is freed in
i3c_master_detach_free_devs() before the master device itself is
released.
As a result, sysfs accesses can dereference a freed master->this
pointer, leading to a use-after-free.
Keep master->this alive until i3c_masterdev_release(), which is called
after the master device and its sysfs state are being torn down. Do not
free master->this as part of the normal device detach path.
On the error path in i3c_master_set_info(), reset master->this and
bus.cur_master to NULL before freeing the allocated device. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Do not treat master device as a duplicate target
i3c_master_search_i3c_dev_duplicate() searches the bus for another I3C
device with the same PID as the reference device. The search can match
master->this, causing the controller itself to be returned as a
duplicate.
Since the controller is not a target device, it cannot be a duplicate of
one. Exclude master->this from matching so that the function only
returns real duplicate target devices. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate the persisted dirty_tail chain at load
The writeback worker follows the persisted dirty_tail chain, which is
decoded from the cache device independently of the key_tail chain that
cache_replay() walks and bounds. A crafted image, whose on-media fields are
authenticated only by a crc32c with a fixed seed, can aim dirty_tail at a
chain of last ksets that never terminates, so cache_writeback_fn() re-arms
itself with no delay forever.
Walk the dirty_tail chain once at load with the same hop cap cache_replay()
uses and fail the table load with -EIO if it does not reach an end within
n_segs hops. |
| In the Linux kernel, the following vulnerability has been resolved:
memcg: move LRU size accounting on reparenting instead of copying it
When a memory cgroup is offlined its LRU folios are reparented to the
parent. lruvec_reparent_lru() splices the child's lists into the
parent's and credits the parent with the child's per-zone
lru_zone_size[], but never clears the child's copy, so the size is
copied rather than moved. lru_gen_reparent_memcg() does the same for
MGLRU.
The parent is left correct, credited with exactly the folios it took
over. The stale value sits on the child and nothing will correct it:
folio->memcg_data now resolves to the parent, so every later
update_lru_size() for those folios goes there.
Dying cgroups are not freed immediately and mem_cgroup_iter() still
walks them, so shrink_lruvec() keeps being called on them.
get_scan_count() reads the phantom counter through lruvec_lru_size() and
the scan loop then grinds through nr[] in SWAP_CLUSTER_MAX steps against
an empty list, for as long as the dead cgroup lives. Under MGLRU the
MGLRU scanner runs instead, but count_shadow_nodes() sums all of
NR_LRU_LISTS through lruvec_lru_size() and over-budgets the shadow node
limit just the same.
On one 251 GiB host a sweep of every mz->lru_zone_size[] found 380
counters describing folios on no list at all: 124777314 pages, 476 GiB,
1.89x the machine's RAM, across 57 cgroups. All were on memcgs with
CSS_DYING set and CSS_ONLINE clear, and parent/child pairs reported
byte-identical sizes.
LRU_UNEVICTABLE needs its size moved too. Its list is deliberately not
spliced because lruvec_init() poisons the head - the unevictable LRU is
imaginary and folios are never threaded on it - but the size is kept by
lruvec_add_folio()/lruvec_del_folio() and those folios account to the
parent from here on.
This depends on commit bf4ade7dbd76 ("memcg: keep folio's objcg same as
its node") and must not be backported ahead of it. Without that
invariant a folio's objcg can belong to another node, so a folio already
spliced onto the parent's list can still resolve to the child's lruvec
until the objcg's node is reparented in a later iteration of
memcg_reparent_objcgs(); clearing the child's counter early then lets
lruvec_del_folio() underflow it and trip the WARN_ONCE()/VM_BUG_ON() in
mem_cgroup_update_lru_size(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: virtio_pmem: refcount requests for token lifetime
KASAN reports slab-use-after-free in __wake_up_common():
BUG: KASAN: slab-use-after-free in __wake_up_common+0x114/0x160
Read of size 8 at addr ffff88810fdcb710 by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted
6.19.0-next-20260220-00006-g1eae5f204ec3 #4 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux
1.17.0-2-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x6d/0xb0
print_report+0x170/0x4e2
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __virt_addr_valid+0x1dc/0x380
kasan_report+0xbc/0xf0
? __wake_up_common+0x114/0x160
? __wake_up_common+0x114/0x160
__wake_up_common+0x114/0x160
? __pfx__raw_spin_lock_irqsave+0x10/0x10
__wake_up+0x36/0x60
virtio_pmem_host_ack+0x11d/0x3b0
? sched_balance_domains+0x29f/0xb00
? __pfx_virtio_pmem_host_ack+0x10/0x10
? _raw_spin_lock_irqsave+0x98/0x100
? __pfx__raw_spin_lock_irqsave+0x10/0x10
vring_interrupt+0x1c9/0x5e0
? __pfx_vp_interrupt+0x10/0x10
vp_vring_interrupt+0x87/0x100
? __pfx_vp_interrupt+0x10/0x10
__handle_irq_event_percpu+0x17f/0x550
? __pfx__raw_spin_lock+0x10/0x10
handle_irq_event+0xab/0x1c0
handle_fasteoi_irq+0x276/0xae0
__common_interrupt+0x65/0x130
common_interrupt+0x78/0xa0
</IRQ>
virtio_pmem_host_ack() wakes a request that has already been freed by the
submitter.
This happens when the request token is still reachable via the virtqueue,
but virtio_pmem_flush() returns and frees it.
Fix the token lifetime by refcounting struct virtio_pmem_request.
virtio_pmem_flush() holds a submitter reference, and the virtqueue holds an
extra reference once the request is queued. The completion path drops the
virtqueue reference, and the submitter drops its reference before
returning. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: synopsys: dw-dp: Support unregistering the AUX channel
The DisplayPort AUX channel gets initialized and registered during
dw_dp_bind(), but it is never unregistered, which may lead to resource
leaks and/or use-after-free.
Add the missing dw_dp_unbind() function to allow the users of the
library to handle the required cleanup, i.e. unregister the AUX adapter. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: dw_dp: Release core resources
Core resources such as the DisplayPort AUX channel get initialized and
registered during dw_dp_bind(), but are never unregistered, which may
lead to memory leaks and/or use-after-free:
[ 224.661371] BUG: KASAN: slab-use-after-free in device_is_dependent+0xe0/0x2b0
[ 224.662015] Read of size 8 at addr ffff00011aee8550 by task modprobe/658
[ 224.662612]
[ 224.662752] CPU: 7 UID: 0 PID: 658 Comm: modprobe Not tainted 7.0.0-rc2-next-20260305 #14 PREEMPT
[ 224.662759] Hardware name: Radxa ROCK 5B (DT)
[ 224.662762] Call trace:
[ 224.662764] show_stack+0x20/0x38 (C)
[ 224.662772] dump_stack_lvl+0x6c/0x98
[ 224.662777] print_report+0x160/0x4b8
[ 224.662783] kasan_report+0xb4/0xe0
[ 224.662790] __asan_report_load8_noabort+0x20/0x30
[ 224.662796] device_is_dependent+0xe0/0x2b0
[ 224.662802] device_is_dependent+0x108/0x2b0
[ 224.662808] device_link_add+0x1f8/0x10b0
[ 224.662813] devm_of_phy_get_by_index+0x120/0x200
[ 224.662819] dw_dp_bind+0x34c/0xb10 [dw_dp]
[ 224.662830] dw_dp_rockchip_bind+0x194/0x250 [rockchipdrm]
[ 224.662864] component_bind_all+0x3a8/0x720
[ 224.662869] rockchip_drm_bind+0x120/0x390 [rockchipdrm]
[ 224.662899] try_to_bring_up_aggregate_device+0x76c/0x838
[ 224.662904] component_master_add_with_match+0x1f4/0x230
[ 224.662909] rockchip_drm_platform_probe+0x420/0x538 [rockchipdrm]
[ 224.662939] platform_probe+0xe8/0x168
[ 224.662945] really_probe+0x340/0x828
[ 224.662950] __driver_probe_device+0x2e0/0x350
[ 224.662954] driver_probe_device+0x80/0x140
[ 224.662959] __driver_attach+0x398/0x460
[ 224.662964] bus_for_each_dev+0xe0/0x198
[ 224.662968] driver_attach+0x50/0x68
[ 224.662972] bus_add_driver+0x2a0/0x4c0
[ 224.662977] driver_register+0x294/0x360
[ 224.662982] __platform_driver_register+0x7c/0x98
[ 224.662987] rockchip_drm_init+0xc4/0xff8 [rockchipdrm]
Since a previous commit exported dw_dp_unbind() function in DW DP core
library to take care of the necessary cleanup, use this in the
component's unbind() callback, as well as in its bind() error path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: analogix_dp: Fix OF node reference leak via auto cleanup
Sashiko reported a reference leak in rockchip_dp_drm_encoder_enable(),
the of_get_child_by_name() function does not call of_node_put() in a
symmetrical way [1].
Fix the device node reference leak by using __free(device_node) to
automatically manage of_node_put() for all device nodes. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Clear queue->active_job when v3d_fence_create() fails
The run_job() callbacks for BIN, RENDER, TFU and CSD assign the incoming
job to queue->active_job before calling v3d_fence_create(). If
v3d_fence_create() fails, the callback returns NULL without clearing
active_job, leaving a dangling pointer.
Create a failure path in all run_job() callbacks that clears the active
job before returning NULL. The BIN path takes queue->queue_lock around the
clear as it races against v3d_overflow_mem_work(); RENDER, TFU and CSD
paths have no concurrent reader, so the clear is lock-free. |
| In the Linux kernel, the following vulnerability has been resolved:
smack: fix incorrect task context in smack_msg_queue_msgrcv
The smack_msg_queue_msgrcv() function incorrectly checks
the permissions of the 'current' task instead of the
'target' task.
In the msgsnd() syscall path, if a receiver is already waiting,
the pipelined_send() optimization is used to push the message
directly to the receiver task:
ipc/msg.c`pipelined_send():
` smp_store_release(&msr->r_msg, msg)
In this case, the 'sender' (current) task performs the check
on behalf of the 'receiver' task (msr->r_tsk, passed as the
'target' parameter):
ipc/msg.c`pipelined_send():
` security_msg_queue_msgrcv(,, target := msr->r_tsk,,)
However, smack_msg_queue_msgrcv() ignores the 'target' and
checks 'current':
smack_msg_queue_msgrcv(…)
` smk_curacc_msq(isp, MAY_READWRITE); // current task
'current' MAY satisfy smack_msg_queue_msgrcv r/w requirement,
but 'target' (the receiver task) might NOT;
as a result, an unauthorized receiver gets the message,
violating MAC policy.
Test:
1) create a sysv message queue with label “foo”
2) echo "bar foo r" >/smack/load2
3) msgrcv(,,,0,MSG_NOERROR) in "bar"-labeled task.
The task is waiting for the messages ...
4) msgsnd() from a "foo"-labeled task:
"bar"-labeled task gets the message.
This patch fixes the issue by checking permission on the
'target' task instead of 'current'.
(2008-02-04, Casey Schaufler) |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: Reject out-of-bounds PD cap count
cros_typec_register_partner_pdos() copies the partner PDOs from the EC
TYPEC_STATUS response into the fixed caps_desc.pdo[PDO_MAX_OBJECTS] array.
memcpy(caps_desc.pdo, resp->source_cap_pdos,
sizeof(u32) * resp->source_cap_count);
...
memcpy(caps_desc.pdo, resp->sink_cap_pdos,
sizeof(u32) * resp->sink_cap_count);
PDO_MAX_OBJECTS is 7. source_cap_count and sink_cap_count are u8 fields
from the EC. The only check is that they are not both zero. If either is
larger than 7, the memcpy writes past the end of the array on the stack.
A count of 255 overflows it by about 1 KB. The EC source arrays are only
seven entries wide. A larger count reads past them too.
The ChromeOS EC firmware caps these counts today, so a compliant setup
does not hit this. The kernel should still validate these values rather
than trust them.
Validate the counts in cros_typec_register_partner_pdos() next to the
memcpy. Skip the PDO registration if either count is above PDO_MAX_OBJECTS.
The rest of cros_typec_handle_status() still runs so events are handled
and cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: quiesce input in hid_hw_stop() to prevent use-after-free
A driver's probe calls hid_device_io_start() to enable input delivery,
then fails at a later initialization step and unwinds via hid_hw_stop().
The unwind frees struct hidraw via hidraw_disconnect() while in-flight
HID reports may still be running on another CPU, dereferencing the
freed object through hidraw_report_event(). syzbot reports the
resulting use-after-free for the corsair-psu HID driver.
Edward Adam Davis posted a per-driver fix for corsair-psu that adds
an explicit hid_device_io_stop() before hid_hw_stop() in the probe
error path ("hwmon: prevent packets from going to driver for probe",
2026-04-28). Auditing the tree shows 15 drivers call
hid_device_io_start(); 7 also call hid_device_io_stop() and 8 do not:
drivers calling hid_device_io_start() without a matching
hid_device_io_stop() before hid_hw_stop():
drivers/hwmon/corsair-psu.c (fix posted by Edward)
drivers/hwmon/corsair-cpro.c
drivers/hwmon/nzxt-kraken3.c
drivers/hwmon/nzxt-smart2.c
drivers/hwmon/gigabyte_waterforce.c
drivers/hid/hid-logitech-dj.c
drivers/hid/hid-nintendo.c
drivers/hid/hid-mcp2221.c
Roughly half of all callers of the API are exposed. Centralize the
quiesce in hid_hw_stop() so callers do not have to remember the
matching stop: if a driver has left hdev->io_started true on entry,
call hid_device_io_stop() before hid_disconnect().
For the 7 drivers that already call hid_device_io_stop() correctly,
hdev->io_started is false on entry, the guard short-circuits, and
behavior is unchanged.
No Fixes: tag because the affected drivers gained their
hid_device_io_start() calls independently over years; the bug is a
class-wide API misuse rather than a regression from one commit. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: bound device-supplied profile index
kone_keep_values_up_to_date() and kone_profile_activated() use an
8-bit, device-supplied profile value as an index into the 5-element
kone->profiles[] array without a range check. A malicious USB device
claiming the Roccat Kone id can send a switch-profile event (or a
startup_profile read at probe) with an out-of-range value and make the
driver read out of bounds; the result is exposed via the actual_dpi
sysfs attribute.
Reject out-of-range indices in both paths.
This was found with static analysis and confirmed with the KUnit test
added in the following patch (KASAN: slab-out-of-bounds). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Return error for invalid number of formats
When the number of input or output formats is zero,
sof_ipc4_widget_setup_comp_src() and sof_ipc4_widget_setup_comp_asrc()
print an error and jump to the cleanup label. At that point 'ret' is
still 0, because the earlier sof_ipc4_get_audio_fmt() call succeeded, so
the function returns success and the caller never finds out that the
widget setup actually failed.
Set ret to -EINVAL before the goto so the error gets reported. |
