| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue Summary: Cryptographic Message Services (CMS) processing fails to perform
sufficient input validation on the cipher and tag length fields of
AuthEnvelopedData containers, leading to various potential compromises.
Impact Summary: Attackers making use of these vulnerabilities may achieve
key-equivalent functionality for a given CMS recipient and/or bypass integrity
validation for a given message.
In one use case, an attacker may send a CMS message containing
AuthEnvelopedData with the cipher specified as a non-AEAD cipher. OpenSSL
erroneously allows this selection, and attempts to decrypt and validate the
message.
An on-path attacker who captures one legitimate AES-GCM AuthEnvelopedData
addressed to the victim can re-emit it with the recipientInfos set left
byte-for-byte intact, so the victim's private key still unwraps the genuine CEK
(the content-encryption key), but with the inner OID rewritten to AES-256-OFB
(Output Feedback Mode, an unauthenticated keystream mode) and with an
attacker-chosen IV and ciphertext. The victim initializes AES-256-OFB under the
real CEK, never consults the MAC field, and CMS_decrypt() returns success.
If the application under attack responds to the attacker with any indicator
showing success or failure of the decryption effort, it is possible for the
attacker to use this as an oracle to obtain key equivalent functionality for the
CEK used for the chosen recipient of the message.
In another use case, an attacker can reduce the tag length of the chosen AEAD
cipher for a given AuthEnvelopedData container to be a single byte long,
allowing an attacker to brute force CMS decryption, producing an integrity
bypass for applications that trust CMS_decrypt() to reject modified content.
The FIPS modules are not affected by this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix out-of-bounds read in smb2_compound_op()
If a server sends a truncated response but a large OutputBufferLength, and
terminates the EA list early, check_wsl_eas() returns success without
validating that the entire OutputBufferLength fits within iov_len.
Then smb2_compound_op() does:
memcpy(idata->wsl.eas, data[0], size[0]);
Where size[0] is OutputBufferLength. If iov_len is smaller than size[0],
memcpy can read beyond the end of the rsp_iov allocation and leak adjacent
kernel heap memory. |
| Side-channel information leakage in PerformanceAPIs in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Low) |
| Side-channel information leakage in Paint in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Low) |
| Side-channel information leakage in Forms in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| A flaw has been found in warmcat libwebsockets up to 4.5.8. This issue affects the function lws_ssh_parse_plaintext of the file plugins/protocol_lws_ssh_base/sshd.c of the component SSH Protocol Handler. Executing a manipulation of the argument msg_len can lead to resource consumption. The attack may be launched remotely. The exploit has been published and may be used. This patch is called 3f9f0c6ecaf0e6f3f219d30632c5d1f2479d7498. A patch should be applied to remediate this issue. |
| OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. Prior to version 0.9.0, the per-CPU message-buffer fallback path uses a 256-byte backup buffer but preserves the original payload size, which can be up to 8KB. If a CPU mismatch occurs, OBI can read beyond the fallback buffer and leak adjacent memory into telemetry. This issue has been patched in version 0.9.0. |
| Improperly preserved integrity of hardware configuration state during a power save/restore operation in the AMD Secure Processor (ASP) could allow an attacker with the ability to write outside the trusted memory range (TMR) to change the execution flow of the Video Core Next (VCN) firmware potentially impacting confidentiality, integrity, or availability. |
| A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate EaNameLength in smb2_get_ea()
smb2_get_ea() reads ea_req->EaNameLength from the client request and
passes it directly to strncmp() as the comparison length without
verifying that the length of the name really is the size of the input
buffer received.
Fix this up by properly checking the size of the name based on the value
received and the overall size of the request, to prevent a later
strncmp() call to use the length as a "trusted" size of the buffer.
Without this check, uninitialized heap values might be slowly leaked to
the client. |
| When generating an ICMP Destination Unreachable or Packet Too Big response, the handler copies a portion of the original packet into the ICMP error body using the IP header's self-declared total length (ip_tot_len for IPv4, ip6_plen for IPv6) without validating it against the actual packet buffer size. A VM can send a short packet with an inflated IP length field that triggers an ICMP error (e.g., by hitting a reject ACL), causing ovn-controller to read heap memory beyond the valid packet data and include it in the ICMP response sent back to the VM. |
| A flaw was found in OVN (Open Virtual Network). A remote attacker, by sending crafted DHCPv6 (Dynamic Host Configuration Protocol for IPv6) SOLICIT packets with an inflated Client ID length, could cause the ovn-controller to read beyond the bounds of a packet. This out-of-bounds read can lead to the disclosure of sensitive information stored in heap memory, which is then returned to the attacker's virtual machine port. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads
atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c
unconditionally dereferences 8 bytes at payload_addr(pkt):
value = *(u64 *)payload_addr(pkt);
check_rkey() previously accepted an ATOMIC_WRITE request with pktlen ==
resid == 0 because the length validation only compared pktlen against
resid. A remote initiator that sets the RETH length to 0 therefore reaches
atomic_write_reply() with a zero-byte logical payload, and the responder
reads sizeof(u64) bytes from past the logical end of the packet into
skb->head tailroom, then writes those 8 bytes into the attacker's MR via
rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel
tailroom per probe (the other 4 bytes are the packet's own trailing ICRC).
IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is
protocol-invalid. Hoist a strict length check into check_rkey() so the
responder never reaches the unchecked dereference, and keep the existing
WRITE-family length logic for the normal RDMA WRITE path.
Reproduced on mainline with an unmodified rxe driver: a sustained
zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer
bytes into the attacker's MR, including recognisable kernel strings and
partial kernel-direct-map pointer words. With this patch applied the
responder rejects the PDU and the MR stays all-zero. |
| A buffer overflow exists in the Brotli library versions prior to 1.0.8 where an attacker controlling the input length of a "one-shot" decompression request to a script can trigger a crash, which happens when copying over chunks of data larger than 2 GiB. It is recommended to update your Brotli library to 1.0.8 or later. If one cannot update, we recommend to use the "streaming" API as opposed to the "one-shot" API, and impose chunk size limits. |
| mouse07410/asn1c is an ASN.1 compiler. In 1.4 and earlier, a memory safety vulnerability was identified in the OER decoding skeleton files generated by asn1c (specifically INTEGER_oer.c). When parsing a maliciously crafted, zero-length OER payload for a variable-length, non-negative INTEGER type, the decoder fails to validate the required bytes before extracting the Most Significant Bit (MSB). This forces a precise 1-byte Heap Out-of-Bounds (OOB) Read. Because asn1c generated code is primarily deployed to parse untrusted network inputs (such as V2X network protocols, 5G telecom headers, or X.509 certificates), when the decoder processes untrusted network-originated input, a remote attacker can exploit this to cause a Denial of Service (DoS) or trigger incorrect integer interpretation in downstream applications (e.g., protocol state poisoning or logic bypass). |
| FastNetMon Community Edition through 1.2.9 has out-of-bounds memory access because it incorrectly parses BGP path attributes with the extended length flag set. In src/bgp_protocol.hpp, the parse_raw_bgp_attribute() function correctly identifies when extended_length_bit is set and sets length_of_length_field to 2, but then reads only a single byte for the attribute value length (attribute_value_length = value[2] at line 173). Per RFC 4271 Section 4.3, when the Extended Length bit is set, the Attribute Length field is two octets and the value should be read as a 16-bit big-endian integer from value[2] and value[3]. As a result, any attribute longer than 255 bytes has its length silently truncated to the low byte (e.g., 300 bytes = 0x012C is read as 0x2C = 44 bytes). The remaining 256 bytes are then misinterpreted as subsequent attributes, causing cascading parse failures and potential out-of-bounds memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate L2CAP_INFO_RSP payload length before access
l2cap_information_rsp() checks that cmd_len covers the fixed
l2cap_info_rsp header (type + result, 4 bytes) but then reads
rsp->data without verifying that the payload is present:
- L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads
4 bytes past the header (needs cmd_len >= 8).
- L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header
(needs cmd_len >= 5).
A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an
out-of-bounds read of adjacent skb data.
Guard each data access with the required payload length check. If the
payload is too short, skip the read and let the state machine complete
with safe defaults (feat_mask and remote_fixed_chan remain zero from
kzalloc), so the info timer cleanup and l2cap_conn_start() still run
and the connection is not stalled. |
| An attacker sending tcp, il, rudp, rudp, or gre packets with a length less than the header size would trigger a kernel panic. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfaces
The Scarlett2 mixer quirk in USB-audio driver may hit a NULL
dereference when a malformed USB descriptor is passed, since it
assumes the presence of an endpoint in the parsed interface in
scarlett2_find_fc_interface(), as reported by fuzzer.
For avoiding the NULL dereference, just add the sanity check of
bNumEndpoints and skip the invalid interface. |
| Side-channel information leakage in Navigation in Google Chrome prior to 148.0.7778.168 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
