| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FreeRDP server versions before 3.31.0 contain a use-after-free vulnerability in the DRDYNVC parser that dereferences a channel pointer after releasing the synchronization lock. Authenticated clients can race AUDIN channel closure messages against DRDYNVC data parsing to trigger heap-use-after-free when accessing freed channel objects. |
| NLnet Labs Unbound 1.22.0 up to and including 1.26.1, has a use-after-free vulnerability when compiled for DNS-over-QUIC support with '--with-libngtcp2'. Each DoQ stream owns an output buffer that holds the DNS response. ngtcp2's retransmission buffer keeps a shallow pointer into the output buffer for as long as a STREAM frame may be resent. On a client RESET_STREAM, the output buffer is freed but ngtcp2 still holds the matching retransmission entries. The next PTO timeout makes ngtcp2 re-encode the STREAM frame and copy from the freed buffer. A malicious actor that can query Unbound over DoQ and that withholds ACKs, sends RESET_STREAM, and waits for PTO, reaches this use-after-free with no privilege. This leads to retransmissions against freed memory and eventually an abnormal server exit under a 20-query spray. |
| NLnet Labs Unbound 1.12.0 up to and including 1.26.0 has a use-after-free vulnerability when compiled for DNS-over-HTTPs support with '--with-libnghttp2'. During failure code paths (i.e., RPZ drop query, jostle due to heavy traffic), a dropped DoH stream brings down the whole DoH session and does not account properly for other DoH streams in the same session. This leads to use-after-free in those code paths. If the prerequisites are satisfied (possible RPZ drop or heavy client traffic), a malicious actor can trigger the vulnerability with a single DoH connection and the appropriate traffic. Impact is limited as the reads are not user controlled and the use-after-free leads to early returns. However, a hardened allocator can catch the use-after-free and controllably terminate the process resulting to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible UAF in icmpv6_rcv()
Caching saddr and daddr before pskb_pull() is problematic
since skb->head can change.
Remove these temporary variables:
- We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr
when net_dbg_ratelimited() is called in the slow path.
- Avoid potential future misuse after pskb_pull() call. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential UAF after skb_unshare() failure
If skb_unshare() fails to unshare a packet due to allocation failure in
rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())
will be NULL'd out. This will likely cause the call to
trace_rxrpc_rx_done() to oops.
Fix this by moving the unsharing down to where rxrpc_input_call_event()
calls rxrpc_input_call_packet(). There are a number of places prior to
that where we ignore DATA packets for a variety of reasons (such as the
call already being complete) for which an unshare is then avoided.
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer. |
| Use-after-free in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox ESR 140.16 and Thunderbird 140.16. |
| Use after free in Input in Google Chrome prior to 153.0.8010.47 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition
In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with
dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue
this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM
event is received.
If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and
the memory allocated for dep with kzalloc() is released by kfree(dep),
while the delayed work mentioned above may still be pending or
running. The sequence of operations that may lead to a UAF bug is as
follows:
CPU0 CPU1
| dwc3_thread_interrupt
| dwc3_endpoint_interrupt
| dwc3_gadget_endpoint_stream_event
| queue_delayed_work(system_percpu_wq,
| &dep->nostream_work)
dwc3_gadget_free_endpoints |
dwc3_free_trb_pool(dep) |
list_del(&dep->endpoint.ep_list) |
dwc3_debugfs_remove_endpoint_dir(dep) |
kfree(dep) |
// dep is freed |
| dwc3_nostream_work
| // use dep (use-after-free)
Fix it by canceling the delayed work before kfree(dep) in
dwc3_gadget_free_endpoints. |
| A vulnerability has been found in luben zstd-jni up to 1.5.7-13. This vulnerability affects the function ZstdCompressCtx.loadDict of the file ZstdCompressCtx.java of the component Dictionary Sharing. Such manipulation leads to use after free. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.7-14 is able to resolve this issue. The name of the patch is a560131d7834598afd9cea6b7c107bc88e915936. The affected component should be upgraded. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| FreeRDP before 3.31.0 contains a use-after-free vulnerability in the smartcard RDPDR device handler when worker thread creation fails after device registration. Attackers can trigger thread creation failure during channel setup to cause device pointer deallocation while devman retains a reference, leading to crash or code execution. |
| strongSwan 5.0.2 through 6.0.7 has an Expired Pointer Dereference in PKCS#7 parsing in the openssl plugin. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: purge outqueue on stale COOKIE-ECHO handling
sctp_stream_update() is only invoked when the association is moved into
COOKIE_WAIT during association setup/reconfiguration. In this path, the
outbound stream scheduler state (stream->out_curr) is expected to be
clean, since no user data should have been transmitted yet unless the
state machine has already partially progressed.
However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a
Stale Cookie ERROR is received, the association is rolled back from
COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already
have been queued and even bundled with the COOKIE-ECHO chunk.
During the rollback, sctp_stream_update() frees the old stream table
and installs a new one, but it does not invalidate stream->out_curr.
As a result, out_curr may still point to a freed sctp_stream_out
entry from the previous stream state.
Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on
stream->out_curr->ext, which can lead to use-after-free once the old
stream state has been released via sctp_stream_free().
This results in crashes such as (reported by Yuqi):
BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140
Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312
CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted
7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full)
sctp_sched_fcfs_dequeue+0x13a/0x140
sctp_outq_flush+0x1603/0x33e0
sctp_do_sm+0x31c9/0x5d30
sctp_assoc_bh_rcv+0x392/0x6f0
sctp_inq_push+0x1db/0x270
sctp_rcv+0x138d/0x3c10
Fix this by fully purging the association outqueue when handling the
Stale Cookie case. This ensures all pending transmit and retransmit
state is dropped, and any scheduler cached pointers are invalidated,
making it safe to rebuild stream state during COOKIE_WAIT restart.
Updating only stream->out_curr would be insufficient, since queued
and retransmittable data would still reference the old stream state and
trigger later use-after-free in dequeue paths. |
| zstd-jni before 1.5.7-14 contains a use-after-free vulnerability where streams and contexts hold a dictionary's shared lock only during the load call, allowing the dictionary to be closed while still referenced. Attackers can close a dictionary after associating it with a stream or context, causing subsequent read or write operations to access freed native memory, resulting in silent data corruption or JVM crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Clear copied tracing state before fork duplication
dup_task_struct() copies user_event_mm from the parent into the child,
without grabbing a reference to it. user_event_mm_dup() should
replace it, but it leaves that copied pointer unmodified if
user_event_mm_alloc() fails.
When the child exits, user_event_mm_remove() decrements a reference
the child never owned, which ultimately frees user_event_mm, while
the parent still as a stale pointer to it. This creates a UAF, which
KASAN reports as:
BUG: KASAN: slab-use-after-free in
current_user_event_mm+0x51/0x1d0 Write of size 4 at addr
ffff888005010d30 by task init/44
Call Trace:
<TASK>
kasan_report+0xce/0x100
kasan_check_range+0x10f/0x1e0
current_user_event_mm+0x51/0x1d0
user_events_ioctl+0x82e/0x15c0
__x64_sys_ioctl+0x139/0x1c0
do_syscall_64+0xce/0x450
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task 44:
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x180/0x3a0
user_event_mm_alloc+0x3c/0x1f0
current_user_event_mm+0x88/0x1d0
Freed by task 42:
__kasan_slab_free+0x43/0x70
kfree+0x13a/0x390
process_one_work+0x696/0xf90
worker_thread+0x420/0xba0
The fix simply clears the copied pointer before any possible failure.
In case of failure, the child then has nothing to free. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free with same-name named triggers
When two hist triggers on different events are registered with the same
name=, the second one reuses the first as named_data. Both are added to
tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(),
because save_hist_vars() is called before event_trigger_register() while
the named reuse is only detected later, in hist_register_trigger().
In the named-data branch hist_register_trigger() then frees the second
histogram's hist_data via destroy_hist_data(), but never removes its
tr->hist_vars list entry, leaving a dangling pointer and leaking the
trace_array reference it holds.
A later hist trigger that references a variable makes find_var_file()
walk tr->hist_vars and dereference the freed hist_data. The bug is
reproducible from userspace by writing three hist triggers to tracefs:
cd /sys/kernel/tracing
echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_switch/trigger
echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_process_fork/trigger
echo 'hist:keys=common_pid:vals=$x' > events/sched/sched_process_exit/trigger
The third write panics the kernel:
BUG: KASAN: slab-use-after-free in find_var_file.part.0+0x272/0x290
Read of size 8 at addr ffff888001f8a0e0 by task sh/1
CPU: 1 UID: 0 PID: 1 Comm: sh Tainted: G D N
Call Trace:
find_var_file.part.0
find_event_var
parse_atom
parse_expr
__create_val_field
event_hist_trigger_parse
trigger_process_regex
event_trigger_write
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Allocated by task 1:
event_hist_trigger_parse
Freed by task 1:
hist_register_trigger+0x618/0xa30
event_hist_trigger_parse
The buggy address belongs to freed 2048-byte region
Oops: general protection fault ... RIP: find_var_file.part.0
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Fix by removing the hist_data from tr->hist_vars and releasing the
trace_array reference in the named-data branch of hist_register_trigger()
before freeing the hist_data. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: mport_cdev: fix use-after-free in dma_req_free()
dma_req_free() acquires buf_mutex through req->map, drops the mapping
reference with kref_put(), and then dereferences req->map again to unlock
the mutex.
If kref_put() drops the last reference, mport_release_mapping() frees the
mapping, and the subsequent mutex_unlock() dereferences a freed object.
This is a use-after-free.
Fix this by caching map and md before kref_put(), clearing req->map while
holding buf_mutex, and using the cached md for mutex unlocking.
The bug is reachable from userspace via the RapidIO mport character device
interface. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_audio: Fix use-after-free on sound card disconnect
g_audio_cleanup() invokes snd_card_free_when_closed() to initiate sound
card teardown and immediately frees the underlying struct snd_uac_chip
context. However, snd_card_free_when_closed() returns asynchronously
while ALSA control elements (kctls) remain open in userspace.
When userspace control applications access or close these open file
descriptors, kctl callbacks attempt to dereference kctl->private_data
pointing to &uac->c_prm or &uac->p_prm within the freed uac structure,
resulting in a use-after-free (UAF) memory corruption.
Fix this issue by deferring the destruction of struct snd_uac_chip until
all references to the ALSA sound card are released. Register a custom
card->private_free callback (u_audio_card_free) during g_audio_setup()
that frees uac and its associated playback/capture request and ring
buffers only when the sound card reference count drops to zero. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
In uvc_function_bind() error path, we use usb_ep_free_request which
uses uvc->control_req but does not set it to NULL afterwards. Thus,
uvc->control_req is a dangling pointer causing a UAF. Also we do not set
the uvc->control_buf pointer to NULL after freeing it, which is another
dangling pointer. Fix it by setting uvc->control_req to NULL after we run
usb_ep_free_request() and uvc->control_buf to NULL after kfree. Do the
same for uvc_function_unbind(). |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: restart ssc_expire_umount walk after dropping nfsd_ssc_lock
nfsd4_ssc_expire_umount() walks nn->nfsd_ssc_mount_list with
list_for_each_entry_safe(ni, tmp, ...). For each expired entry it
sets nsui_busy = true, drops nfsd_ssc_lock to run mntput() on the
source vfsmount, then reacquires the lock to list_del + kfree the
entry and continue iterating via the macro's saved tmp pointer.
The nsui_busy flag protects the current ni from concurrent
nfsd4_ssc_setup_dul() finders during the lock-drop window, but it
does not pin tmp. Another nfsd RPC thread that fails its source-
server mount and reaches nfsd4_ssc_cancel_dul() will, during that
same window, take nfsd_ssc_lock, list_del + kfree its own ssc_umount
item, and release the lock. If that item is the saved tmp of the
expire walk, the next iteration dereferences a freed
nfsd4_ssc_umount_item.
Restart the walk from the head after the mntput() unlock window so
no saved next pointer survives the lock-drop. The list is bounded
by the number of active inter-server source mounts (typically small)
and the expire delayed-work runs periodically rather than per-IO,
so the restart is cheap. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: initialize copy-notify stateid before publishing it
nfsd4_copy_notify() finished initializing the cpntf state after
nfs4_alloc_init_cpntf_state() had already linked it into the
s2s_cp_stateids IDR and the parent's sc_cp_list, with cs_count == 1 (the
membership reference) and none held for the caller. A racing
OFFLOAD_CANCEL (crafted cl_id == nn->s2s_cp_cl_id plus the guessable
so_id) could reach manage_cpntf_state() and free the entry, turning the
caller's subsequent cpn_cnr_stateid read and cp_p_stateid/cp_p_clid
writes into use-after-free. The owning clientid was also only recorded
after publication, so it could not gate an ownership check in that window.
Record cp_p_stateid and cp_p_clid inside nfs4_alloc_init_cpntf_state()
before nfs4_init_cp_state() publishes the entry, and return it with an
extra reference. The caller reads the stateid under that reference and
drops it with nfs4_put_cpntf_state(); on a late error the laundromat
reaps the entry. |
