| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: bound pp_dpm_set_pp_table() memcpy
The powerplay path allocates hardcode_pp_table once with kmemdup(...,
soft_pp_table_size). memcpy(..., size) used the sysfs store count (up to
PAGE_SIZE) with no upper bound, causing heap overflow. Reject
writes where size exceeds soft_pp_table_size. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm: fix SmartShift bias sysfs store PM refcount on parse error
Return the parse error before acquiring PM access. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix buffer overflow during vBIOS update
Clamp the buffer postion to write by setting the bin attribute
to the maximum buffer size so that VFS layer will block the
out-of-bounds accessing. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/ras: add ras_suspend callback and use it for cp_ecc_error_irq
cp_ecc_error_irq is acquired in amdgpu_gfx_ras_late_init() but
released in gfx_v9_0_hw_fini(), so the put site has to query
amdgpu_irq_enabled() because the get is skipped on SR-IOV VF.
ras_late_init / ras_fini have no suspend counterpart, so move the
put to amdgpu_gfx_ras_suspend() / amdgpu_gfx_ras_fini() and add a
matching ras_suspend callback that is invoked from
amdgpu_ras_suspend() before disable_all_features(). The get and
put now sit in the same place and check the same condition (not
VF, funcs registered), no refcount querying needed.
An active flag gates ras_fini so the
suspend-then-unload-without-resume path falls into
amdgpu_ras_block_late_fini_default() instead of double-releasing
what ras_suspend already cleaned up.
Drop the cp_ecc_error_irq put from gfx_v9_0_hw_fini(). gfx_v8_0
manages cp_ecc_error_irq locally and is unaffected; no other GFX
generation has this IRQ. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Validate partition index before array access
construct_region() reads cxled->part and uses it to index
cxlds->part[] without checking for a negative value. If the
partition was never resolved, part remains at its initial value
of -1, causing an out-of-bounds array access.
Add a guard to return -EBUSY when part is negative.
The check was dropped during a merge. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix SMI event cross-process information leak
kfd_smi_ev_enabled() skips the suser privilege check when pid=0.
PROCESS_START, PROCESS_END, and VMFAULT events are emitted with
pid=0 while carrying another process's PID and command name, so any
/dev/kfd user in the render group can monitor all GPU workloads.
Pass the target process PID into kfd_smi_event_add() for these events
so the existing per-client filter restricts delivery to the owning
process or CAP_SYS_ADMIN subscribers. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umem: Be careful about boundary conditions in ib_umem_find_best_pgsz()
Several corner cases, especially important on 32 bits:
- umem->iova is u64, the function argument should pass in u64 or
iova will be truncated
- Check that the length is not too large for the iova
- Check that lengths > 4G don't overflow the GENMASK |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: NUL-terminate replaced sysctl value
When writing to sysctls, proc_sys_call_handler() guarantees that the
buffer passed to proc handlers is NUL-terminated. If
bpf_sysctl_set_new_value() replaces the pending sysctl value, it can
hand a replacement buffer directly to proc handlers. However, the
helper currently copies only buf_len bytes into that buffer without
appending a NUL terminator, leaving downstream parsers vulnerable to
out-of-bounds access.
Fix this by appending a '\0' after the replaced value to restore the
expected sysctl semantics. Since the helper already rejects buf_len
greater than PAGE_SIZE - 1, there is always room for the extra byte.
Reproduced in a QEMU x86_64 guest booted with KASAN while exercising
the sysctl replacement path with a cgroup/sysctl BPF program. The
reproducer targets `/proc/sys/net/core/flow_limit_cpu_bitmap`, fills
the original user write buffer with non-zero bytes, and overrides the
sysctl value so the replacement buffer lacks a terminating NUL. Under
that setup, the pre-fix kernel reported:
BUG: KASAN: slab-out-of-bounds in strnchrnul+0x72/0x90
Read of size 1 at addr ffff88800de57000 by task repro_patch3/66
CPU: 0 UID: 0 PID: 66 Comm: repro_patch3 Not tainted 7.1.0-rc3-00269-g8370ca1f87cc #6 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
print_report+0xcb/0x5e0
? __virt_addr_valid+0x21d/0x3f0
? strnchrnul+0x72/0x90
? strnchrnul+0x72/0x90
kasan_report+0xca/0x100
? strnchrnul+0x72/0x90
strnchrnul+0x72/0x90
bitmap_parse+0x37/0x2e0
flow_limit_cpu_sysctl+0xc6/0x840
? __pfx_flow_limit_cpu_sysctl+0x10/0x10
? __kvmalloc_node_noprof+0x5ba/0x870
proc_sys_call_handler+0x31d/0x480
? __pfx_proc_sys_call_handler+0x10/0x10
? selinux_file_permission+0x39f/0x500
? lock_is_held_type+0x9e/0x120
vfs_write+0x98e/0x1000
...
</TASK>
The buggy address is located 0 bytes to the right of
allocated 4096-byte region [ffff88800de56000, ffff88800de57000)
With this fix applied, rerunning the same sysctl-targeted path yields
no corresponding KASAN reports. |
| In the Linux kernel, the following vulnerability has been resolved:
hsr: broadcast netlink notifications in the device's net namespace
The HSR generic netlink family sets .netnsok = true. HSR devices can
live in network namespaces other than init_net.
Two async notifiers broadcast events with genlmsg_multicast(). They
are hsr_nl_ringerror() and hsr_nl_nodedown(). That helper delivers
only on the default genl socket in init_net. So the events always land
in init_net. The network namespace of the device does not matter.
This has two effects. A listener in the device's own namespace never
sees its own ring error and node down events. A privileged listener in
init_net receives events from HSR devices in other namespaces. The
payload carries the peer node MAC (HSR_A_NODE_ADDR) and the slave port
ifindex (HSR_A_IFINDEX).
Switch both callers to genlmsg_multicast_netns(). Other families with
.netnsok = true already do this. Examples are gtp, ovpn, team,
batman-adv, netdev-genl, ethtool and handshake.
hsr_nl_ringerror() already has the slave port. It uses
dev_net(port->dev). hsr_nl_nodedown() takes the namespace from the
master port via hsr_port_get_hsr(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: es18xx: check control allocation before private data setup
snd_es18xx_mixer() creates controls with snd_ctl_new1() and then stores
bookkeeping pointers or sets private_free before calling snd_ctl_add().
snd_ctl_new1() can return NULL on allocation failure, so those writes
can dereference a NULL control pointer.
Check the returned control pointers before using them and return -ENOMEM
on allocation failure. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack()
The timestamp-only fast path dereferences the option stream as
*(__be32 *)ptr, which assumes 4-byte alignment that the TCP option
stream does not guarantee. Use get_unaligned_be32() instead, which
reads the value safely and already returns host byte order, so the
htonl() on the comparison constant can be dropped.
This matches the existing get_unaligned_be32() use later in the same
function. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: balance: fix potential bg lookup failure in btrfs_may_alloc_data_chunk()
[BUG]
Running btrfs balance can trigger a null-ptr-deref before relocating a
data chunk when metadata corruption leaves a chunk in the chunk tree
without a corresponding block group in the in-memory cache:
KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f]
RIP: 0010:btrfs_may_alloc_data_chunk+0x40/0x1c0 fs/btrfs/volumes.c:3601
Call Trace:
__btrfs_balance fs/btrfs/volumes.c:4217 [inline]
btrfs_balance+0x2516/0x42b0 fs/btrfs/volumes.c:4604
btrfs_ioctl_balance fs/btrfs/ioctl.c:3577 [inline]
btrfs_ioctl+0x25cf/0x5b90 fs/btrfs/ioctl.c:5313
...
[CAUSE]
__btrfs_balance() iterates the on-disk chunk tree and passes the chunk
logical bytenr to btrfs_may_alloc_data_chunk() before relocating a data
chunk. That helper then queries the in-memory block group cache:
cache = btrfs_lookup_block_group(fs_info, chunk_offset);
chunk_type = cache->flags; /* cache may be NULL */
A corrupt image can contain a chunk item whose matching block group
item is missing, so no block group is ever inserted into the cache. In
that case btrfs_lookup_block_group() returns NULL.
The code only guards this with ASSERT(cache), which becomes a no-op when
CONFIG_BTRFS_ASSERT is disabled. The subsequent dereference of
cache->flags therefore crashes the kernel.
[FIX]
Add a NULL check after btrfs_lookup_block_group() in
btrfs_may_alloc_data_chunk() and print and error message for clarity. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: tree-checker: validate names in ROOT_REF and ROOT_BACKREF
ROOT_REF and ROOT_BACKREF items contain a struct btrfs_root_ref followed
by the subvolume name. Several readers assume that this layout is already
valid and then use the on-disk name length directly. A corrupted item can
therefore make those readers address bytes outside the item, and
BTRFS_IOC_GET_SUBVOL_INFO can copy too many bytes into its fixed-size UAPI
name buffer.
Validate ROOT_REF and ROOT_BACKREF items in tree-checker before any reader
uses them. Reject records that do not contain a non-empty name, whose
name_len does not exactly describe the remaining item payload, or whose
name exceeds BTRFS_NAME_LEN.
For BTRFS_IOC_GET_SUBVOL_INFO, copy only the validated on-disk name_len
instead of deriving the copy length from the item size. The ioctl result is
zeroed when allocated. That leaves the existing trailing zero byte
untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8365-afe-pcm: fix possible NULL-pointer dereferences in mt8365_afe_suspend()
mt8365_afe_suspend() allocates the register backup buffer with
devm_kcalloc(), but does not check for allocation failure before using the
returned pointer. This may lead to a NULL pointer dereference when
accessing afe->reg_back_up[i].
Add the missing NULL check and return -ENOMEM on allocation failure after
disabling the main clock.
Also propagate the return value of mt8365_afe_suspend() in
mt8365_afe_dev_runtime_suspend() so that the suspended state is not updated
when suspend fails. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-srv: Fix integer underflow in process_read and process_write
usr_len is read from a network-supplied message field (le16_to_cpu)
and used to compute data_len = off - usr_len without validating that
usr_len <= off. A malicious RDMA client can send usr_len > off causing
an integer underflow, resulting in data_len wrapping to a huge size_t
value which is then passed to the rdma_ev callback as a memory length,
leading to out-of-bounds memory access.
Fix by reading and validating usr_len <= off before rtrs_srv_get_ops_ids()
in both process_read() and process_write(), ensuring the early return
path acquires no reference and has no resource leak. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: quiesce DMA before freeing resources
pdsc_teardown() frees DMA buffers but does not disable bus mastering,
leaving the device able to perform DMA after the buffers are freed.
This can lead to use-after-free if the device writes to freed memory.
Add pci_clear_master() to pdsc_teardown() to disable bus mastering
before freeing resources, ensuring all DMA is quiesced.
Add pci_set_master() to pdsc_setup() to re-enable bus mastering,
which is needed for the firmware recovery path since pdsc_teardown()
now disables it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ibm: emac: mal: fix potential system hang in mal_remove()
napi_disable() is not idempotent and calling it on an already-disabled
or unenabled NAPI context will cause the kernel to spin indefinitely
waiting for the NAPI_STATE_SCHED bit to clear.
In mal_remove(), napi_disable() is called unconditionally. If no MACs were
registered, NAPI was never enabled. Also, if they were registered but
subsequently unregistered, NAPI was already disabled in
mal_unregister_commac(). In either case, calling napi_disable() causes
the kernel to hang upon module removal.
Fix this by only calling napi_disable() in mal_remove() if the commac list
is not empty (which implies NAPI is enabled). |
| In the Linux kernel, the following vulnerability has been resolved:
netconsole: take target_cleanup_list_lock in drop_netconsole_target()
drop_netconsole_target() unlinks the target while only holding
target_list_lock. However, when the underlying interface has been
unregistered, netconsole_netdev_event() moves the target from
target_list to target_cleanup_list, and netconsole_process_cleanups_core()
walks that list under target_cleanup_list_lock only.
If a user removes the configfs target at the same time the cleanup
worker is iterating target_cleanup_list, list_del() can corrupt the list
because the two paths take disjoint locks while operating on the same
list node.
Acquire target_cleanup_list_lock around the list_del() so the unlink is
serialised against netconsole_process_cleanups_core() regardless of
which list the target currently belongs to. The state transition that
downgrades STATE_DEACTIVATED to STATE_DISABLED is left intact and is
performed under the same combined locking, preserving the existing
ordering with resume_target(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: Do not cancel requests in io target before it is initialized
A new nvme-fc controller in CONNECTING state sees admin request timeout
schedules ctrl->ioerr_work to abort inflight requests. This ends up
calling __nvme_fc_abort_outstanding_ios() which aborts requests in both
admin and io tagsets. In case fc_ctrl->tag_set was not initialized we
see the warning below. This is because ctrl.queue_count is initialized
early in nvme_fc_alloc_ctrl().
nvme nvme0: NVME-FC{0}: starting error recovery Connectivity Loss
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
lpfc 0000:ab:00.0: queue 0 connect admin queue failed (-6).
you didn't initialize this object before use?
turning off the locking correctness validator.
Workqueue: nvme-reset-wq nvme_fc_ctrl_ioerr_work [nvme_fc]
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x80
register_lock_class+0x567/0x580
__lock_acquire+0x330/0xb90
lock_acquire.part.0+0xad/0x210
blk_mq_tagset_busy_iter+0xf9/0xc00
__nvme_fc_abort_outstanding_ios+0x23f/0x320 [nvme_fc]
nvme_fc_ctrl_ioerr_work+0x172/0x210 [nvme_fc]
process_one_work+0x82c/0x1450
worker_thread+0x5ee/0xfd0
kthread+0x3a0/0x750
ret_from_fork+0x439/0x670
ret_from_fork_asm+0x1a/0x30
</TASK>
Update the check in __nvme_fc_abort_outstanding_ios() confirm that io
tagset was created before iterating over busy requests. Also make sure
to cancel ctrl->ioerr_work before removing io tagset. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate connectionless PSM length
Connectionless L2CAP frames carry a two-byte PSM at the start of the
payload. l2cap_recv_frame() currently reads that PSM unconditionally
after validating only the outer L2CAP length.
A malformed connectionless frame with a zero- or one-byte payload can
therefore make the parser read beyond the advertised skb payload and use
tailroom bytes as part of the PSM. A VHCI-backed QEMU reproducer
injected a one-byte connectionless payload and reached the unchecked
read.
Reject connectionless frames that cannot contain the PSM before reading
or pulling it. This preserves all valid connectionless frames while
dropping only structurally incomplete packets. |
