| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse ThreadX NetX Duo versions 6.4.0 through 6.5.2.202603a, built with VLAN and SRP support, the MSRP parser uses the attribute list length from the received frame without comparing it with the packet length. An unauthenticated station on the same Layer 2 segment can send a short MSRP frame declaring a long list and make the MRP worker read far past the received packet, faulting it on targets with memory protection. |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the TFTP client copies the message of a received ERROR packet without bounding the copy by the end of the datagram, and the TFTP server reads one byte past a minimal ERROR packet. A malicious TFTP server can make the client copy up to 64 bytes of adjacent packet-pool memory into the error string the application retrieves, or fault on targets with memory protection. |
| CSV formula injection vulnerability in the export functionality of the Coupa Supplier Portal SaaS platform. The vulnerability arises because certain user-controlled data, such as event names or templates within the Tenders module, are not properly validated or sanitised before being included in CSV files generated by the application. An attacker with low privileges can input specially crafted values that begin with characters interpreted as formulas by spreadsheet applications. When a victim downloads and opens the generated file in a compatible client, the content may be interpreted as a formula, potentially leading to unauthorised actions such as the execution of commands via mechanisms such as DDE, access to information, or interaction with system resources under the victim’s context. |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the DHCP client's option walk advances its offset one byte less than its read pointer for every option it skips. A DHCP server, or any host on the link that answers first, can make the client read up to about a kilobyte past the received message, and the same walk copies out-of-bounds bytes into the application's buffer when it retrieves a user option. |
| A flaw was found in GStreamer's gst-plugins-bad H.265 video parser. When parsing a specially crafted H.265 bitstream containing a Screen Content Coding (SCC) extension with certain palette predictor initializer settings, an integer underflow in the upper-bound computation allows the parser to accept an out-of-range value for the number of palette predictor entries. This causes the parser to write beyond the end of a fixed-size array, resulting in memory corruption and an application crash. An attacker can deliver the malformed bitstream as a local file or over a network stream such as HTTP, HLS, DASH, RTSP, RTP, or WebRTC. Successful exploitation requires the application to open or play that content, and is limited to a denial-of-service impact. |
| In multiple functions of hppsfilter.c, there is a possible out-of-bounds write due to a stack buffer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In decode_packed_entry_number of codebook.c, there is a possible out-of-bounds read due to a logic error in the code. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager loaders take a module image without its length and trust the sizes and offsets in its preamble. A crafted module image can declare a code size larger than the image to read, or gain access to, the memory that follows it, and can place its entry points outside its code. |
| The RTIO submission-queue verifier rtio_vrfy_sqe() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) accumulated the results of K_SYSCALL_MEMORY() into its valid_sqe flag with &=. That macro returns nonzero on failure (it is built on K_SYSCALL_VERIFY_MSG(), which yields !(expr)), so every buffer permission check contributed the opposite of its result. A submission whose tx.buf, rx.buf or txrx.tx_buf/txrx.rx_buf pointer was not accessible to the calling thread was accepted, while a legitimate, thread-owned buffer caused the calling thread to be killed with a kernel oops.
The verifier runs on behalf of the rtio_sqe_copy_in_get_handles() system call (also reached through the inline rtio_sqe_copy_in() wrapper), so it is driven directly by untrusted user-mode input on any image built with CONFIG_USERSPACE. A user thread that has been granted an RTIO context and an rtio_iodev object — the intended usage of RTIO userspace support, established via rtio_access_grant() — can submit an SQE whose buffer pointer and length name arbitrary kernel memory; the object check on sqe->iodev is unaffected and still passes, and the crafted SQE is forwarded to the bus driver unchanged.
Downstream consumers dereference the pointer with supervisor privilege. The generic I2C and I3C RTIO fallback handlers (drivers/i2c/i2c_rtio_default.c, drivers/i3c/i3c_rtio_default.c) copy sqe.rx.buf/sqe.tx.buf into struct i2c_msg and call i2c_transfer(), and the vendor SPI/I2C RTIO drivers behave equivalently. An RTIO_OP_RX submission therefore has peripheral data written into kernel memory of the attacker's choosing (arbitrary kernel write), an RTIO_OP_TX submission clocks kernel memory out over the bus (kernel memory disclosure), and a pointer to unmapped memory faults the kernel. This is a full escape from the user-mode isolation boundary that CONFIG_USERSPACE exists to enforce.
The defect was masked for years because the in-tree user-mode RTIO tests only exercise RTIO_OP_NOP and mempool-backed reads, neither of which reaches the affected checks. The fix negates each K_SYSCALL_MEMORY() result and additionally validates the TXRX transmit buffer read-only, matching the SPI, I2C and I3C handlers. |
| CGI versions from 4.71 before 5.00 for Perl allow denial of service via a plain string dereferenced as a symbolic reference in uploadInfo.
uploadInfo dereferences its argument and calls its filename method without checking that it is an upload filehandle. A plain string naming a defined global variable, such as the parameter value from ?upload=0, is treated as a symbolic reference, and the method call on it dies. |
| The nRF link-layer receive paths of the open-source Bluetooth LE Controller did not validate the on-air LENGTH field of a received PDU against the maximum receive length that was used to program the radio. isr_rx_pdu() in subsys/bluetooth/controller/ll_sw/nordic/lll/lll_conn.c enqueued any non-empty data PDU after only the sequence-number and (for encrypted links) MIC checks, and the corresponding isr_rx() handlers in lll_central_iso.c, lll_peripheral_iso.c, lll_sync_iso.c and lll_scan_aux.c did the same for ISO and extended-advertising PDUs. The nRF radio stores the received header verbatim and truncates only the payload at PCNF1.MAXLEN, so a frame declaring more octets than were configured leaves a node buffer whose len field describes more data than the buffer holds.
An attacker within radio range that can emit a hand-crafted link-layer PDU — for a connection, any peer that establishes an unencrypted LE connection to a connectable advertiser; for CONFIG_BT_CTLR_SYNC_ISO, any broadcaster the device is synchronised to — can set the length byte up to 255 while the controller has programmed a much smaller maximum (lll->dle.eff.max_rx_octets, which is 27 until a Data Length Update, or the negotiated cis_lll->rx.max_pdu). No pairing, authentication or user interaction is required. On encrypted links the CCM MIC check normally rejects such a frame first, so the exposure is on unencrypted traffic, which is why the added check is placed after decryption.
The unchecked length reaches hci_acl_encode() in subsys/bluetooth/controller/hci/hci.c, which performs net_buf_add(buf, pdu_data->len) followed by a memcpy() of that many bytes out of the node_rx pool element. Because CONFIG_BT_CTLR_DATA_LENGTH_MAX and CONFIG_BT_BUF_ACL_RX_SIZE both default to 27, this is an out-of-bounds read of up to roughly 228 bytes past the received PDU and a corresponding out-of-bounds write past the HCI ACL buffer into neighbouring buffers of the same pool; the tailroom test in net_buf_simple_add() is only enforced when CONFIG_NET_BUF_HARDENING (or CONFIG_ASSERT) is enabled. On the ISO paths the same unchecked length makes isoal_rx_append_to_sdu() read past the ISO node buffer and emit adjacent controller RAM to the host as ISO data. The practical result is remote memory corruption and controller crashes, plus disclosure of controller memory into the host data path.
The fix rejects any received PDU whose length exceeds the value that was used to configure the radio reception. Note that lll_sync.c (periodic advertising sync reception) was not changed and still enqueues received PDUs without an equivalent bound. |
| A flaw was found in uv. This vulnerability allows an attacker to execute malicious code during package resolution or installation via specially crafted ZIP (Zipped Information Package) archives that exploit parsing differentials, requiring user interaction to install an attacker-controlled package. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, visionOS 27.2. Processing a maliciously crafted file may lead to unexpected app termination. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, tvOS 27.2, visionOS 27.2, watchOS 27.2. Processing a maliciously crafted image may result in disclosure of process memory. |
| A buffer overflow was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A remote attacker may be able to cause unexpected app termination. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2, tvOS 27.2, visionOS 27.2. Processing a 3D model may result in disclosure of process memory. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. An app may be able to cause unexpected system termination or read kernel memory. |
| A flaw has been found in TOTOLINK A950RG 4.1.2cu.5268_B20221104. Affected by this vulnerability is the function setMacFilterRules of the file /cgi-bin/cstecgi.cgi of the component MAC Filter Handler. This manipulation of the argument addEffect causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used. |
| Out of bounds read in ANGLE in Google Chrome on on Mac prior to 157.0.8103.38 allowed a remote attacker to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| A flaw was found in dnsmasq. The DHCPv6 client hostname parser can read one byte past the end of a crafted FQDN option because it checks the next label length before confirming the pointer is still inside the option. An attacker on the local network can trigger this with a single DHCPv6 packet. The extra byte is not returned to the client or logged, and no crash has been demonstrated. |
