| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: handle forward allocation error
batadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skb
for each DHT candidate, but does not check the return value before passing
it to batadv_send_skb_prepare_unicast_4addr(). That function dereferences
the skb unconditionally, so a failed allocation triggers a NULL pointer
dereference.
Skip forwarding to the current DHT candidate on allocation failure. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_policy: fix strict mode inbound policy matching
match_policy_in() walks sec_path entries from the last transform to the
first one, but strict policy matching needs to consume info->pol[] in
the same forward order as the rule layout.
Derive the strict-match policy position from the number of transforms
already consumed so that multi-element inbound rules are matched
consistently. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix tp_meter counter underflow during shutdown
batadv_tp_sender_shutdown() unconditionally decrements the "sending"
atomic counter. If multiple paths (e.g. timeout, user cancel, and
normal finish) call this function, the counter can underflow to -1.
Since the sender logic treats any non-zero value as "still sending",
a negative value causes the sender kthread to loop indefinitely.
This leads to a use-after-free when the interface is removed while
the zombie thread is still active.
Fix this by using atomic_xchg() to ensure the counter only transitions
from 1 to 0 once.
[sven: added missing change in batadv_tp_send] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: serialize accept_q access
bt_sock_poll() walks the accept queue without synchronization, while
child teardown can unlink the same socket and drop its last reference.
The unsynchronized accept queue walk has existed since the initial
Bluetooth import.
Protect accept_q with a dedicated lock for queue updates and polling.
Also rework bt_accept_dequeue() to take temporary child references under
the queue lock before dropping it and locking the child socket. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: diag: reject stale associations in dump_one path
The SCTP exact sock_diag lookup can hold a transport reference, block on
lock_sock(sk), and then resume after sctp_association_free() has marked
the association dead and freed its bind address list.
When that happens, inet_assoc_attr_size() and
inet_diag_msg_sctpasoc_fill() can still dereference association state
that is no longer valid for reporting. In particular,
inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a
real sctp_sockaddr_entry and trigger an out-of-bounds read from
unrelated association memory.
Reject the association after taking the socket lock if it has been
reaped or detached from the endpoint, and report the lookup as stale.
This keeps the exact dump-one path from formatting torn association
state. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_hbh: reject oversized option lists
struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors,
but hbh_mt6_check() does not reject larger optsnr values supplied from
userspace.
Validate optsnr in the rule setup path so only match data that fits the
fixed-size opts array can be installed. This follows the existing xtables
pattern of rejecting invalid user-provided counts in checkentry() and
keeps the packet matching path unchanged.
`struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array,
where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible:
[ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29
[ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]' |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix fragment reassembly length accounting
batman-adv keeps a running payload length for queued fragments and uses it
to validate a fragment chain before reassembly.
That accounting currently allows the accumulated fragment length to be
truncated during updates. As a result, malformed fragment chains can
bypass the intended validation and drive reassembly with inconsistent
length state, leading to a local denial of service.
Fix the accounting by storing the accumulated length in a length-typed
field and rejecting update overflows before the existing validation logic
runs.
The fix was verified against the original reproducer and against valid
fragment reassembly paths. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: hold bridge skb->dev while queued
br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge
master before queueing bridge LOCAL_IN packets. NFQUEUE only holds
references on state.in/out and bridge physdevs, so a queued bridge
packet can retain a freed bridge master in skb->dev until reinjection.
When the verdict is reinjected later, br_netif_receive_skb() re-enters
the receive path with skb->dev still pointing at the freed bridge master,
triggering a use-after-free.
Store skb->dev in the queue entry, hold a reference on it for the queue
lifetime, and use the saved device when dropping queued packets during
NETDEV_DOWN handling. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: scope conn->binding slowpath to bound sessions only
When the binding SESSION_SETUP sets conn->binding = true, the flag stays
set after the call so that the global session lookup in
ksmbd_session_lookup_all() can find the session, which was not added to
conn->sessions. Because the flag is connection-wide, the global lookup
path will also resolve any other session by id if asked.
Tighten the global lookup so that the returned session must have this
connection registered in its channel xarray (sess->ksmbd_chann_list).
The channel entry is installed by the existing binding_session path in
ntlm_authenticate()/krb5_authenticate() when a SESSION_SETUP completes
successfully, so this condition is a strict equivalent of "this
connection has been accepted as a channel of this session". Connections
that have not bound to a given session cannot reach it via the global
table.
The existing conn->binding gate for entering the slowpath is preserved
so that non-binding connections keep the fast-path-only behavior, and
the session->state check is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_vti: set netns_immutable on the fallback device.
john1988 and Noam Rathaus reported that vti6_init_net() does not set the
netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0).
Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel)
correctly set this flag during their fallback device initialization to
prevent them from being moved to another network namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA: During rereg_mr ensure that REREG_ACCESS is compatible
If IB_MR_REREG_ACCESS changes from RO to RW then the umem has to be
re-evaluated to ensure it is properly pinned as RW. Since the umem is
hidden inside each driver's mr struct add a ib_umem_check_rereg() function
that each driver has to call before processing IB_MR_REREG_ACCESS.
mlx4 has to retain its duplicate ib_access_writable check because it
implements IB_MR_REREG_ACCESS | IB_MR_REREG_TRANS by changing both items
in place sequentially while the MR is live, so it will continue to not
support this combination. |
| A flaw has been found in arc53 DocsGPT up to 0.18.0. The affected element is the function encrypt_credentials of the file application/security/encryption.py of the component Credential Storage. This manipulation causes insufficient verification of data authenticity. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is described as difficult. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance. |
| A vulnerability was detected in skypilot-org skypilot up to 0.12.0. Impacted is the function username.encode of the file sky/users/server.py of the component User ID Handler. The manipulation results in use of weak hash. The attack may be performed from remote. This attack is characterized by high complexity. The exploitability is considered difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure. |
| Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg-msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer. Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer. The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet. The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0. |
| Nmap through 7.99 does not keep the IPv6 extension-header walk within the captured packet in ipv6_get_data_primitive (libnetutil/netutil.cc), so the pointer advances past the buffer and the remaining-length computation underflows to a large value. A scanned target or on-path attacker returning a crafted IPv6 response with a truncated extension header can trigger out-of-bounds reads and a crash during raw IPv6 scans. |
| Flowise before 3.1.3 validates Custom MCP stdio environment variables against a denylist using a case-sensitive comparison, so on Windows, where environment names are case-insensitive, supplying 'node_options' bypasses the NODE_OPTIONS denylist entry. An authenticated user who can configure a Custom MCP node can thereby inject NODE_OPTIONS --require and execute arbitrary code in the Flowise server context. |
| RustDesk gates incoming control messages on per-capability flags rather than on the session's authorized connection type, and a file-transfer session does not clear those flags. A peer holding only a valid FileTransfer authorization can inject keyboard and mouse input and reach the unguarded screenshot and display-capture handlers, acting outside its granted scope. |
| nghttp2's nghttpx proxy through 1.69.0 forwards an HTTP/1.1 Upgrade request that also carries a Content-Length header and body onto reusable keep-alive backend connections, re-adding the Upgrade and Connection headers while passing Content-Length verbatim. A backend that resolves the resulting ambiguous message in the attacker's favor enables HTTP request/response smuggling and cross-client response-queue poisoning. |
| MyBB 1.8.40 does not restrict which usergroup a limited Admin Control Panel user may assign when creating or editing users; the user module offers the Administrators group (gid 4) and its datahandler's verify_usergroup() unconditionally returns true. An admin holding only the delegated user-management permission can assign the Administrators group to an account and escalate to the full Administrator permission set. |
| Gitea act_runner with the Docker backend (through act 0.262.0) passes a workflow's container.options string to the Docker job container's HostConfig and, when configured with privileged: false, forces only the Privileged flag off while merging options such as --pid=host, --cap-add, and --security-opt unchanged. A user who can run a workflow on a Docker-backed runner can create a job container with host namespaces and broad capabilities and escape to the host as root despite privileged mode being disabled. |
