| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: udp: Create exceptions before socket matching
Currently, when ICMPv6 Packet Too Big and Redirect Message packets are
locally delivered and quote a UDP packet, an exception is only created
in the IPv6 exception cache if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the exception cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and
commit a00df2caffed ("ipv6: make exception cache less predictible") tried
to mitigate such attacks by making it harder for attackers to discover
hash collisions in the exception cache and by randomizing the number of
exceptions a hash bucket can hold, respectively. Unfortunately, both of
the mitigations can be bypassed.
Instead, mitigate such attacks by always creating an exception, even
before trying to find a matching socket. Do that by calling
ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted
packet did not originate from a socket.
This means that guesses (right or wrong) from an off-path attacker will
always result in an exception being created or updated in the cache that
the attacker can observe.
Pass the ifindex of the ingress device and the default uid, in a similar
fashion to icmpv6_err(). Unlike IPv4, an oif of 0 would not match any
nexthop in ip6_redirect_nh_match() and no exception would be created in
response to a Redirect Message.
Note that this does not allow attackers to create exceptions that they
could not create before, as both helpers can already be reached with
little to no validation. For example, by sending an ICMPv6 error that
quotes an ICMPv6 Echo Reply or one that quotes a UDP source port that
matches a wildcard socket.
Also note that in the good case (matched socket) the above scheme comes
at the cost of an extra route lookup, as the no socket helpers perform
their own lookup before the one performed by ip6_sk_update_pmtu() /
ip6_sk_redirect(). When the two resolve to different nexthops, it also
results in two exceptions being created for the same destination IP. One
in the exception cache of the nexthop resolved by the no socket helpers
and another in the exception cache of the nexthop used by the socket. |
| In writeGrantedUriPermissions of UriGrantsManagerService.java, there is a possible permission bypass due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| GraphQL Tools provides utilities for building, stitching, and mocking GraphQL schemas. Prior to version 1.1.36 of the GraphQL Tools legacy WebSocket executor package, buildWSLegacyExecutor in packages/executors/legacy-ws/src/index.ts reuses one WebSocket and replaces its single websocket.onmessage handler whenever a new overlapping subscription starts. The handler delivers LEGACY_WS.DATA frames to the newest observer without comparing data.id with the subscription operation id, so a caller using the same executor can receive another user's authorized subscription payload while the earlier caller's stream is starved. This issue is fixed in version 1.1.36 of the GraphQL Tools legacy WebSocket executor package. |
| A stack-based buffer overflow exists in Kamailio v6.1.3 and v6.1.4 in the ims_qos_npn module. The w_rx_aar_register() function copies the attacker-controlled host field from the SIP `Via` header into a fixed 46-byte stack buffer without validating its length. An unauthenticated remote attacker can trigger the vulnerability with a crafted SIP `REGISTER` request, causing stack corruption and termination of the affected Kamailio instance, resulting in denial of service. |
| In multiple locations, there is a possible way to share files across profiles due to a logic error in the code. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In setNotificationListenerAccessGrantedForUserInternal of NotificationManagerService.java, there is a possible policy desynchronization due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| follow-redirects is an open source, drop-in replacement for Node's `http` and `https` modules that automatically follows redirects. Prior to 1.16.0, when an HTTP request follows a cross-domain redirect (301/302/307/308), follow-redirects only strips authorization, proxy-authorization, and cookie headers (matched by regex at index.js). Any custom authentication header (e.g., X-API-Key, X-Auth-Token, Api-Key, Token) is forwarded verbatim to the redirect target. This vulnerability is fixed in 1.16.0. |
| .NET, .NET Framework, and Visual Studio Elevation of Privilege Vulnerability |
| Improper input validation in the BIOS firmware for some Intel(R) Processors may allow an authenticated user to potentially enable denial of service via adjacent access. |
| In onPersistentGroupsChanged of WifiP2pServiceImpl.java, there is a possible permission bypass due to a missing permission check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible side channel information leak due to improperly used crypto. This could lead to paired device information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In getSelectionBySubIds of ProviderUtil.java, there is a possible cross-user data leak due to a logic error in the code. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Composer is a dependency manager for PHP. Versions 1.0 through 2.2.26 and 2.3 through 2.9.5 contain a command injection vulnerability in the Perforce::generateP4Command() method, which constructs shell commands by interpolating user-supplied Perforce connection parameters (port, user, client) without proper escaping. An attacker can inject arbitrary commands through these values in a malicious composer.json declaring a Perforce VCS repository, leading to command execution in the context of the user running Composer, even if Perforce is not installed. VCS repositories are only loaded from the root composer.json or the composer config directory, so this cannot be exploited through composer.json files of packages installed as dependencies. Users are at risk if they run Composer commands on untrusted projects with attacker-supplied composer.json files. This issue has been fixed in Composer 2.2.27 (2.2 LTS) and 2.9.6 (mainline). |
| In l2c_fcr_process_peer_cfg_req of l2c_fcr.cc, there is a possible memory safety issue due to an integer overflow. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In decodeWapPdu of WapPushOverSms.java, there is a possible out of bounds read due to an integer overflow. This could lead to a remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In dec_vlc_read of oapv_vlc.c, there is a possible out-of-bounds read due to a heap buffer overflow. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Dell Alienware Command Center (AWCC), versions prior to 6.14.54.0, contain an Improper Input Validation vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Denial of Service. |
| In parseChunk of MPEG4Extractor.cpp, there is a possible denial of service due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Observable Timing Discrepancy vulnerability in potatosalad jose allows recovery of a long-term X25519 private key through a timing side channel in the pure-Erlang Curve25519 fallback.
The pure-Erlang X25519 implementation performs scalar multiplication over the secret private key using a recursive Montgomery ladder (jose_jwa_x25519:curve25519/2) whose clauses branch on individual bits of the clamped private scalar, and whose per-step operations (jose_jwa_x25519:montgomery_add/3 and jose_jwa_x25519:montgomery_double/1) and field inversion are built from value-dependent Erlang bignum arithmetic (multiplication, remainder, and modular exponentiation). Although the ladder is operation-count balanced and fixed at 254 steps, the concrete integer values processed at each step, and therefore the running time, depend on the secret scalar. The execution time of the public entry points jose_jwa_x25519:scalarmult/2, jose_jwa_x25519:x25519/2, jose_jwa_x25519:x25519_base/1, and jose_jwa_x25519:sk_to_pk/1 is thus a function of the private key.
This path is reachable from the public API, most notably when a service decrypts attacker-supplied ECDH-ES (JWE) messages with a long-term X25519 key (for example through JOSE.JWK.box_decrypt_ecdh_es/2, which reaches jose_jwa_curve25519:x25519_shared_secret/2 and the ladder). An attacker who can submit ciphertexts and measure decryption timing can, in principle, recover the private key bit by bit, defeating the resistance X25519 was designed to provide. Recovery of the key compromises the confidentiality and authenticity of all data protected by it.
This issue affects jose: from 1.10.0 before 1.11.13. |
| CVE-2026-116768 is a missing length validation vulnerability
in Secure Access servers prior to 14.61. Authenticated attackers can cause a
persistent denial of service when connecting for the first time. |
