| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An information disclosure issue was addressed with improved state management. This issue is fixed in iOS 27 and iPadOS 27, tvOS 27, visionOS 27, watchOS 27. A local app may be able to read a persistent account identifier. |
| In printf of printf.c, there is a possible out-of-bounds write due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| The SMS OTP flow fails to adequately handle error messages, allowing an attacker to infer the existence of registered user accounts based on the responses received during the OTP initiation process.
This weakness can be exploited by an attacker to discover valid usernames within the system. The impact is amplified for accounts that have not configured a mobile number, as the enumeration is specifically tied to this condition. The discovery of these usernames can facilitate subsequent brute force attacks, social engineering attempts, and information leakage, potentially leading to reputational damage, loss of customer trust, and regulatory non-compliance. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_gre: fix hardware header length for NBMA tunnels
ip6gre_tnl_link_config_route() accumulates the lower device's hardware
header length into dev->hard_header_len whenever header_ops is set. This
is incorrect for both users of header_ops.
ip6gretap and ip6erspan have a fixed Ethernet hardware header length.
For an NBMA ip6gre tunnel, ip6gre_header() creates only the GRE header,
the optional FOU or GUE header, and the outer IPv6 header. The lower
device header is headroom needed later, not part of the tunnel device's
hardware header.
Keep the lower device header in needed_headroom. Set hard_header_len to
the tunnel header length only for ARPHRD_IP6GRE devices with header_ops,
and leave the fixed Ethernet header length unchanged for tap and erspan
devices. |
| Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, The FollowRedirect client middleware strips Authorization and Cookie headers only when a redirect changes authority, but authority comparison excludes the URI scheme. A same-authority redirect from HTTPS to HTTP therefore preserves credentials and transmits them over a plaintext connection. An attacker who can induce the downgrade and observe the network can capture those sensitive headers from applications using FollowRedirect. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| OpenCost provides cost monitoring for Kubernetes workloads and cloud costs. Prior to 1.121.0, the POST /serviceKey endpoint in pkg/costmodel/router.go allows a network client to invoke AddServiceKey without mandatory authentication and submit an arbitrary key form value that is written to the GCP service-account key.json file returned by GetGCPAuthSecretFilePath in core/pkg/env/core.go. The attacker controls the file contents but not the CONFIG_PATH-derived directory, the key.json filename, or the file mode. Replacing the credential contents can disrupt GCP cost collection or cause OpenCost to use attacker-selected credentials, and the wildcard Access-Control-Allow-Origin response permits browser-assisted requests when the service is reachable from a browser. This issue is fixed in version 1.121.0. |
| fastify versions before 5.12.2 decide whether to compile a request schema based on JavaScript truthiness, but JSON Schema Draft 7 defines the boolean false as a valid schema that rejects every instance. When an application assigns false to a route's body, querystring, params, or headers schema to deny all input, fastify treats it as a missing schema, compiles no validator, and runs the route handler on any request. An unauthenticated remote client can therefore reach a handler that a valid deny-all schema was intended to make unreachable, a complete validation bypass that can lead to unauthorized state changes or execution of disabled operations. Users should upgrade to fastify 5.12.2 or later. |
| fastify versions before 5.12.2 treat the object resolved by a successful Ajv async validator as the value result protocol used by custom validator compilers. If a request that passes its route schema contains a property named value at the root, fastify replaces the entire request body with that property's value before the handler runs, so the handler receives a different object than the one that satisfied the schema. An authenticated low-privilege caller can use this to make nested data replace the validated body and trigger an operation the route schema did not authorize, leading to unauthorized state changes and data disclosure. Users should upgrade to fastify 5.12.2 or later. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. Connecting to a malicious SMB share may disclose kernel memory. |
| Vikunja before 2.6.0 fails to properly restrict access to the link-share hash field in single-share read endpoints, allowing read-only members to obtain the share's secret credential. Attackers can exchange the disclosed hash for a link-share JWT at the share's permission level to escalate privileges and perform unauthorized writes or administrative actions. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. From 4.6.0 until 4.14.6 and 5.0.0-beta3, DB::getFile() and DB::searchFile() in src/syscheckd/src/db/src/file.cpp concatenate a monitored file path into SQLite row filters. On non-Windows systems, FIMDBCreator::encodeString() does not escape the value. A local user who can create a filename in a File Integrity Monitoring directory can inject a UNION SELECT expression when wazuh-syscheckd processes or deletes that path. The confirmed primitive manipulates SELECT result sets consumed by the FIM code; stacked statements and remote code execution were not demonstrated. This issue is fixed in versions 4.14.6 and 5.0.0-beta3. |
| GrowthBook through 5.0.1 returns unredacted fact table definitions including raw warehouse SQL in payloads served by unauthenticated public report and experiment endpoints. Attackers with knowledge of a publicly shared report or experiment identifier can read internal data warehouse query text, schema, table names, filter values and datasource identifiers. |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. In versions 4.14.0 through 4.14.6, an authenticated low-privilege user can read the cluster secret from the manager configuration because the logic that masks sensitive values is disabled by any update-config RBAC rule, including an explicit deny. The mask_sensitive_config() decorator applies masking only when _has_update_permissions() returns false, but that gate treats a user as able to update the config whenever a manager:update_config or cluster:update_config rule exists, without ever checking whether the rule's effect is allow or deny. Because a deny rule is stored as a real entry, a read-only account that is hardened by explicitly denying config edits is counted as having update permission, which turns masking off. A single authenticated GET request to the configuration endpoint with raw=true then returns the verbatim ossec.conf XML with cluster.key in clear, whereas an otherwise identical account without the deny rule sees the value masked. This issue is fixed in version 4.14.7. |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. In versions 4.14.0 through 4.14.6, a low-privilege API user can read the cleartext cluster key from a configuration endpoint that fails to redact it. The REST API provides a masking control, mask_sensitive_config, that redacts sensitive fields such as authd.pass and cluster.key from configuration responses for users who lack update-config permission, and every config-read endpoint carries this decorator except GET /cluster/local/config. That endpoint, backed by read_config_wrapper, is gated only by cluster:read and returns the local node's cluster configuration including the cleartext key, whereas its siblings return the same value masked. As a result, any account with the default readonly or cluster_readonly role, which is explicitly denied update-config precisely so it cannot view secrets, receives the real cluster key. Because the cluster key authenticates and encrypts traffic between cluster nodes, disclosing it to an unprivileged account provides the authentication precondition for the cluster-peer remote code execution chains established by prior advisories. This issue is fixed in version 4.14. |
| The "Design Scuole Italia" WordPress theme is affected by multiple Authorization Bypass vulnerabilities in the dsi_pdf_generator and dsi_csv_generator functions, allowing an unauthenticated attacker to access restricted "Circolare" content and registered users' data. An unauthenticated RSS feed at /circolare/feed/ further facilitates exploitation. |
| Dragonfly is an open source P2P-based file distribution and image acceleration system. Prior to 2.4.4, manager/router/router.go registers GET /api/v1/oauth and GET /api/v1/oauth/:id without jwt.MiddlewareFunc() or RBAC(), while manager/handlers/oauth.go returns models.Oauth records and manager/models/oauth.go exposes Oauth.ClientSecret as client_secret in JSON. When an administrator has configured a GitHub or Google OAuth provider, an unauthenticated network client can reach GetOauth or GetOauths, load the stored models.Oauth record, and obtain the provider's client secret, client identifier, and redirect URL. The earlier GHSA-j8hf-cp34-g4j7 remediation protected the /jobs group only and did not protect these OAuth GET handlers. Disclosure of client_secret can enable abuse of the configured identity-provider integration, subject to the provider's redirect URI restrictions. This issue is fixed in 2.4.4. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 10.1.0 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that certain conditions could have allowed an authenticated user to access sensitive credentials and tokens without transiting the expected proxy due to improper authorization checks on internal data emission endpoints. |
| Improper input validation in Extensions in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to bypass web origin policy into a privileged page via crafted network traffic. (Chromium security severity: Low) |
| Flowise before 3.1.4 contains a validation bypass vulnerability in MCP server configuration allowing authenticated attackers remote code execution through an unvalidated cwd parameter. Attackers can bypass path validation using clean filenames in the args array while controlling the working directory to execute malicious code. |
| free5GC is an open-source implementation of the 5G core network. In 4.2.3 and earlier, HandleCreateEeSubscriptions and HandleQueryeesubscriptions in free5gc/udr internal/sbi/api_datarepository.go validate the ueId path value with a regular expression whose final .+ alternative accepts every non-empty string instead of restricting identifiers to supported SUPI and GPSI formats. An actor with network reachability to the UDR SBI can submit a non-3GPP identifier to /nudr-dr/v2/subscription-data/{ueId}/context-data/ee-subscriptions, causing the identifier to pass validation and enter the normal create or query flow. The advisory does not independently establish whether authentication is required. Invalid identifiers can be persisted and retrieved as subscription records, enabling unauthorized data creation, UDR namespace pollution, persistent subscriber-metadata corruption, and interference with downstream components that trust stored identifiers to use valid 3GPP formats. The exposure is most relevant in lab, test, or loosely segmented service-based-interface deployments where direct UDR access is possible. |
