| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The affected products are vulnerable to command injection attack that could allow an unauthenticated attacker to execute system commands during the pairing process. |
| Omni C20 uses hard-coded credentials that could allow an attacker to monitor log files to obtain credentials to access information like mapping data. |
| The Botslab G980H dash camera firmware contains an authorization vulnerability in its session based command functionality. The product does not sufficiently associate an authenticated session with the client connection that established it, and subsequent privileged operations rely on possession of a valid session identifier without adequately validating the requesting client's authenticated context. An unauthenticated attacker with adjacent network access could potentially use valid session state associated with another client to access privileged functionality. |
| Omni C20 lacks proper certificate validation which could allow an attacker to perform a man-in-the-middle attack which could allow them to execute arbitrary code. |
| The Botslab G980H dash camera firmware contains a session management vulnerability in which authentication state can remain valid after the associated client connection has been terminated or replaced. Under certain connection conditions, a newly established connection can displace an existing client while previously established session state remains active until a separate expiration mechanism invalidates it. An unauthenticated attacker with adjacent network access could potentially take advantage of this residual authentication state to access functionality associated with another client's session. |
| The Botslab G980H dash camera firmware generates session identifiers using a small sequential value space rather than a suitably unpredictable source. An unauthenticated attacker with adjacent network access and knowledge that an active session exists could potentially determine a valid session identifier and use it to bypass intended authorization controls. |
| Taskview Community before 1.56.0 contains a missing authentication vulnerability that allows unauthenticated attackers to register arbitrary OAuth clients and take over user accounts by exploiting the OAuth 2.0 Dynamic Client Registration endpoint, which is enabled by default and requires no authentication. Attackers can send a POST request to the registration endpoint to obtain a client_id and client_secret, then craft a malicious authorization link pointing to an attacker-controlled redirect URI to capture authorization codes and exchange them for access tokens granting full API access to victim account data. |
| The Botslab G980H dash camera firmware includes sensitive configuration information, including WiFi credentials, in diagnostic logs generated during the support process. These logs remain accessible on removable storage after the support operation has completed. An unauthenticated attacker with physical access to the storage media could retrieve the logs and obtain sensitive device information. |
| The Botslab G980H dash camera firmware contains a path traversal vulnerability in its HTTP server. An attacker with access to the device's WiFi network could submit a crafted request to access files within the device's removable storage that were not intended to be directly accessible through the web server. Exposed files could include recordings, images, diagnostic logs, or firmware files. |
| The Botslab G980H dash camera firmware transmits sensitive information over unencrypted HTTP and RTSP connections. An attacker capable of intercepting communications on the device's WiFi network could obtain stored recordings, live video, location information, images, diagnostic logs, or other sensitive information exchanged between the device and its mobile application. |
| Prior to 9/18/2026, the iSteamX mobile application's AWS policy could grant authenticated users access to wildcard MQTT topics, which can expose other users' device data and allow the attacker to start and stop other connected users' devices. This risked exposing user profile information and potential scalding due to unintended device activation. |
| The Link Library WordPress plugin before 7.9.6 does not properly escape some parameters before outputting them in the addresses of links it generates on its front-end directory pages, leading to Reflected Cross-Site Scripting which could be used against any visitor, including logged-in administrators. |
| The Link Library WordPress plugin before 7.9.6 does not sanitize a user-supplied destination folder before writing a generated image to disk, allowing users with the Contributor role and above to create directories and write or overwrite image files anywhere the web server can write, including outside the site's document root.
The written file name is always numeric with a fixed image extension, so executable code cannot be planted this way. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: fix queue leak when connect backlog is exceeded
When pending disconnecting queues exceed the backlog limit, the
connect path only drops the device reference and leaks the newly
allocated queue and its IB resources. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix racy access to FDP placement id array
nvme_query_fdp_info() is called per-path and therefore prone to races.
It populates head->nr_plids/head->plids for fdp registration.
But nothing protects that pair from concurrent access - two paths scanning
the same namespace can race to populate it.
Avoid the race by moving this initialization work to nvme_alloc_ns_head()
which is called once per shared namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Address potential out-of-bounds read in resp_worker()
Although 'commit 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the
owner went away")' fixes the scenario it was intended for by walking the
message and only decoding QAIC_TRANS_DEACTIVATE_FROM_DEV, if present, it
skipped over the bounds checking code that is included in decode_message().
This could lead to issues such as reading past the slab allocation's end,
infinite loops or kernel panics. For those issues to happen, a malformed
wire message is needed to be sent from the device.
Instead of duplicating the bounds checking code already present in
decode_message(), use the function inside resp_worker(). |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned
long, but the target field (poll_msec) is unsigned int. On 64-bit systems,
a value > UINT_MAX is silently truncated when stored.
Fix the mismatch by using kstrtouint() instead. This rejects values larger
than UINT_MAX at parse time, making truncation impossible. Also add a check
for value < 1 to reject the 0-delay case, which would cause the poll work to
spin without delay and consume 100% CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp_async: drop the errored frame instead of resetting its headroom
ppp_receive_nonmp_frame() prepends a two-byte direction tag before running
the pass/active BPF filters:
*(__be16 *)skb_push(skb, 2) = htons(PPP_FILTER_INBOUND_TAG);
Nothing on the receive path guarantees those two bytes of headroom. The
frame-error path in ppp_async's process_input_packet() resets a reused skb's
headroom to zero while claiming to restore it to a freshly allocated state -
but a fresh skb from dev_alloc_skb() carries NET_SKB_PAD:
err:
if (skb) {
/* make skb appear as freshly allocated */
skb_trim(skb, 0);
skb_reserve(skb, - skb_headroom(skb));
}
ap->rpkt still points at that skb, so the next frame is reassembled into it
with no headroom at all. A peer that sends a bad-FCS frame followed by one
beginning ff 03 then leaves a single byte of headroom by the time the filter
tag is pushed, which lands one byte below skb->head:
skbuff: skb_under_panic: len:49 put:2 head:ffff888003c10000
data:ffff888003c0ffff tail:0x30 end:0x640 dev:<NULL>
kernel BUG at net/core/skbuff.c:214!
RIP: 0010:skb_panic+0x13e/0x230
Call Trace:
skb_push+0xbd/0x100
ppp_receive_nonmp_frame+0x48a/0x1d10
ppp_input+0x4e9/0x2f80
ppp_async_process+0x2a/0xe0
tasklet_action_common+0x20f/0x8a0
handle_softirqs+0x18e/0x590
Kernel panic - not syncing: Fatal exception in interrupt
Zeroing the headroom violates the NET_SKB_PAD guarantee that dev_alloc_skb()
gives the rest of the receive path. Besides the filter panic above, when CCP
compression is enabled ppp_decompress_frame() hands skb->data - 2 to
->decompress()/->incomp(), which then reads out of bounds before skb->head
for the same reason.
Rather than restore the headroom, drop the errored frame - as ppp_synctty
already does on its error path - and clear ap->rpkt so the next frame is
reassembled into a fresh skb with proper headroom. This is simpler and fixes
both the filter under-panic and the CCP out-of-bounds read.
The original V1 of this patch made room in ppp_receive_nonmp_frame() with
skb_cow_head(); Eric pointed out that fixing the root cause in the transport
is the right approach.
Found by fuzzing the PPP receive path with a mutating peer on a pty; it is an
interesting (remote) DoS: root configures PPP, the peer supplies two crashing
frames. The reproducer (repro-ppp-skb.c, unchanged from v1) panics in about a
second, and returns cleanly with this applied. |
| An insecure direct object reference in the nested attributes handling of the Mongoid object-document mapper may allow a user with basic application privileges to reference a record identifier that is not their own. Processing such a request can cause that record to be looked up without the usual ownership or scoping restrictions, then updated and linked to the requesting user's own record. This may result in unintended disclosure and unauthorized modification of data belonging to other users of the application. |
| Mongoid contains an unsafe reflection weakness in the document persistence layer of its object-document mapping code. Input whose keys are passed through from an unauthenticated party by an embedding application can cause unintended internal method invocation instead of the intended array field update. This may result in unintended removal of stored records and in the embedding application becoming unresponsive. |
