| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Financial Transaction Manager (FTM) for RedHat OpenShift could allow a local attacker to achieve privilege escalation within the container due to improper privilege management. |
| IBM Financial Transaction Manager (FTM) for RedHat OpenShift could allow a remote attacker to manipulate database queries due to improper neutralization of special elements in a boolean expression. |
| IBM Financial Transaction Manager (FTM) for RedHat OpenShift is vulnerable to missing authentication on the Business Rules Manager commands REST endpoint (`CommandsResource.java:31`). A local actor can invoke unauthenticated commands to cause resource exhaustionand halt business-rule management functions. |
| In the Linux kernel, the following vulnerability has been resolved:
swiotlb: use the adjusted address for the highmem page lookup
swiotlb_bounce() reads the page frame number from the slot's recorded
orig_addr, then advances orig_addr by tlb_offset to reach the address
the caller asked about. The highmem branch mixes the two: the offset
within the page comes from the adjusted address, the page from the value
before it.
Once the adjustment crosses a page boundary the pair no longer describes
one location, and the whole copy lands one page below the intended one
for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE
writes the device data over the wrong page and leaves the intended one
stale, DMA_TO_DEVICE feeds the device from a page the mapping may not
cover. Partial syncs through dma_sync_single_range_for_*() are what make
tlb_offset non-zero.
The branch test is picked the same way, so a slot recorded in lowmem can
be adjusted into highmem and the lowmem path then hands a highmem
address to phys_to_virt().
Take both from orig_addr once it is final and keep pfn in the branch
that uses it. PhysHighMem() asks the question straight from the address,
as dma-debug already does. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: add missing rcu_read_lock(), skb_dst_force() and dev_hold() for xfrm_trans_reinject()
syzbot reported a suspicious RCU usage warning in ip6_pkt_drop():
WARNING: suspicious RCU usage in ip6_pkt_drop
include/net/addrconf.h:389 suspicious rcu_dereference_check() usage!
Call Trace:
__in6_dev_get_safely include/net/addrconf.h:389 [inline]
ip6_pkt_drop+0x596/0x610 net/ipv6/route.c:4620
ip6_pkt_discard+0x1c/0x30 net/ipv6/route.c:4651
xfrm_trans_reinject+0x324/0x630 net/xfrm/xfrm_input.c:806
process_one_work kernel/workqueue.c:3322 [inline]
process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486
When commit 4f4920669d21 ("xfrm: Reinject transport-mode packets through
workqueue") converted xfrm_trans_reinject from a tasklet to a workqueue,
the reinjection loop ceased running in softirq context. Workqueue workers
run in process context where local_bh_disable() does not enter an RCU
read-side critical section under CONFIG_PREEMPT_RCU.
Because finish callbacks (such as ip6_rcv_finish) expect to run under an
RCU read lock (performing route lookups, l3mdev lookups, and accessing
RCU-protected data structures), invoking them in workqueue context without
rcu_read_lock() triggers RCU lockdep warnings.
Furthermore, packets queued to the workqueue via xfrm_trans_queue_net()
may carry non-refcounted (noref) dst entries (e.g. from ip_route_input_noref).
Additionally, on netdevice unregistration, dst_dev_put() replaces dst->dev
with blackhole_netdev, so dst entries do not keep skb->dev alive while
queued in the workqueue.
Fix these issues by:
1. Calling skb_dst_force(skb) in xfrm_trans_queue_net() while still in the
caller's RCU section to ensure dst is reference-counted before queuing.
2. Holding a reference on skb->dev via dev_hold()/dev_put() across workqueue
deferral so skb->dev remains valid during finish() callback processing.
3. Acquiring rcu_read_lock() around the finish callback invocation loop in
xfrm_trans_reinject(). |
| Improper resource exposure in Extensions in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to obtain cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| With `[migrations] ALLOWED_DOMAINS` set to a matching entry such as `*` or a hostname wildcard, Gitea's migration URL validation could permit reserved and link-local addresses, such as `169.254.169.254`, even when `ALLOW_LOCALNETWORKS = false`. The local-network block list did not cover these ranges, and a hostname matching the allow list was accepted regardless of its resolved address. A user who can start migrations on such an instance could reach these addresses from the Gitea server; the default empty `ALLOWED_DOMAINS` configuration is not affected. |
| This vulnerability in Veeam Backup & Replication allows a Backup Viewer to modify the Enterprise Manager master key and stored antivirus update credentials. |
| With `[repository] FORCE_PRIVATE = true`, Gitea creates new repositories as private, but the post-receive hook still applied the `repo.private=false` push option to an empty repository created by push. Any user who can create repositories could make their new repository public in violation of the instance policy. The default configuration is not affected. |
| Unsigned integer underflow in wstrncat() in src/port.c in wolfSSL wolfSSH from v1.4.11 through v1.5.0 on non-Windows platforms allows an authenticated remote attacker to write one out-of-bounds null byte past the end of a stack buffer by sending a crafted SFTP path. wolfSSH_RealPath() in src/ssh.c appends each path component with a remaining-size bound (outSz - curSz) rather than the full destination size, so once the accumulated path reaches half the output buffer the size_t computation n - strlen(s1) - 1 wraps to near SIZE_MAX. The strncat() call is then effectively unbounded and copies the whole component; when that component exactly fills the remainder of the buffer, its terminating null is written one byte past the end. The caller's own length check keeps the copied data inside the buffer, so the overflow is limited to that single null byte, which may corrupt an adjacent stack value and crash the process. Applications that call the public wolfSSH_RealPath() with an output buffer smaller than the input path are additionally exposed to an unbounded copy, because the word32 expression outSz - segSz in that length check also wraps. |
| When password or public key authentication is used with the Windows port of wolfSSHd, the Windows logon token acquired for one authenticated connection is not released before a token is acquired for a subsequent connection, resulting in user login poisoning between connections. A less privileged user with a valid account on the server can exploit this to force a login as a more privileged user. The vulnerability was introduced with the initial Windows port of wolfSSHd in wolfSSH version 1.4.15 and affects all versions through 1.5.0. Non-Windows builds of wolfSSHd are not affected. |
| This vulnerability in Veeam Backup & Replication allows an authenticated Cloud Connect tenant to read arbitrary files on the service provider host. |
| wolfSSH does not validate that the ECDSA curve identifier in a KEXDH_REPLY host key blob matches the algorithm negotiated during key exchange. In ParseECCPubKey() (src/internal.c), the blob's algorithm string is used to derive the curve via NameToId/wcPrimeForId without checking against the negotiated ssh->handshake->pubKeyId, and the RFC 5656 curve identifier string is discarded via GetSkip() rather than compared. An active network man-in-the-middle attacker can substitute a host key blob containing a different ECDSA curve, causing the client to import the key on the wrong curve. Because the attacker controls the private key for the substituted curve, signature verification passes. Exploitation requires an active MitM position and a lax public key check callback (e.g., TOFU, algorithm-name-only check, or fingerprint match against the parsed key). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: use hlist_del_init_rcu for state_cache and state_cache_input
Commit 14acf9652e56 ("xfrm: defensively unhash xfrm_state lists in
__xfrm_state_delete") converted bydst/bysrc/byseq/byspi from
hlist_del_rcu() to hlist_del_init_rcu() so that a second
__xfrm_state_delete() on the same object becomes a no-op rather than a
write through LIST_POISON pprev. It missed state_cache and
state_cache_input, which kept hlist_del_rcu():
- hlist_del_rcu() leaves pprev = LIST_POISON2 (non-NULL), so
hlist_unhashed() returns false.
- hlist_del_init_rcu() leaves pprev = NULL, so hlist_unhashed()
returns true.
A second __xfrm_state_delete() therefore enters __hlist_del() on the
already-deleted state_cache/state_cache_input nodes and does
WRITE_ONCE(*pprev, next) through LIST_POISON2 — a write use-after-free
once the slab is reused. The corruption can in turn cause a subsequent
hlist_for_each_entry_rcu traversal to follow a dangling next pointer,
producing the read use-after-free reported in xfrm_input_state_lookup().
Switch state_cache and state_cache_input to hlist_del_init_rcu() to
match the other four lists, closing the write use-after-free and, with
it, the read use-after-free it spawns. |
| In the Linux kernel, the following vulnerability has been resolved:
exec: Cleanup POSIX timers right after de_thread()
A per-thread CPU timer holds a reference to the PID of the thread it is
attached to and, while it is armed, its node is queued in that thread's
posix_cputimers. The task is looked up by that PID.
When a non-leader thread exec()s, de_thread() changes which task owns
that PID. pid_task(timer->it.cpu.pid, PIDTYPE_PID) then returns NULL,
but the node is still queued on tsk, which is alive. timer_lock_sighand()
takes a failed lookup to mean that the node is already dequeued, so it
has nothing to undo.
begin_new_exec() calls posix_cpu_timers_exit(me) right after
exec_task_namespaces() and that removes the leftover node, so the state
normally stays invisible. But bprm->point_of_no_return is set before
de_thread(), so if unshare_files(), set_mm_exe_file(), exec_mmap() or
exec_task_namespaces() fails, the task dies before it gets there.
exit_itimers() then frees the k_itimer while its node is still queued,
and reaping tsk later erases that freed node from the rbtree.
In short:
the non-leader thread B the parent
timer_create(CLOCK_THREAD_CPUTIME_ID)
timer_settime()
arm_timer() // the node is queued on B
execve()
de_thread(B)
exchange_tids(B, leader) // B's PID now belongs to the leader
release_task(leader)
__exit_signal(leader)
posix_cpu_timers_exit(leader) // cleans leader's queue, not B's
__unhash_process(leader) // that PID has no task anymore
exec_mmap()
mmap_read_lock_killable(old_mm)
kill(B, SIGKILL)
// -EINTR
get_signal()
do_exit()
exit_itimers()
posix_timer_delete()
posix_cpu_timer_del()
posix_timer_unhash_and_free() // freed while still queued
wait4()
release_task(B)
posix_cpu_timers_exit(B)
cleanup_timerqueue()
timerqueue_del() // use-after-free
Move the POSIX timer cleanup right after de_thread() before any of the
later failure conditions brings the task into do_exit().
[ tglx: Move the cleanup right after de_thread() ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: lock the socket in sock_gettstamp()
sk->sk_flags must only be changed while holding the socket lock,
because sock_set_flag() and sock_reset_flag() use non atomic
operations (__set_bit() and __clear_bit()).
sock_gettstamp() is one of the last places where a bit of sk->sk_flags
is changed from a syscall without owning the socket lock, through
sock_enable_timestamp(sk, SOCK_TIMESTAMP).
sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags
without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp,
sunrpc, wireguard) need a careful audit, this will be addressed in a
separate patch.
Jungwoo Lee and Wongi Lee reported an UDP socket use-after-free
caused by this bug: a SIOCGSTAMPNS_NEW ioctl racing with bind()
can cancel the SOCK_RCU_FREE bit that udp_lib_get_port() just set,
because both threads perform a read-modify-write on the same word.
CPU 0 (bind) CPU 1 (SIOCGSTAMPNS_NEW)
-------------------------------- ----------------------------
read sk_flags = F read sk_flags = F
compute F | BIT(SOCK_RCU_FREE) compute F | BIT(SOCK_TIMESTAMP)
store F | BIT(SOCK_RCU_FREE)
sk_add_node_rcu(sk, ...)
store F | BIT(SOCK_TIMESTAMP)
After the lost update, SOCK_RCU_FREE is clear while the socket is
visible to lockless UDP receive lookups. sk_destruct() then frees
the socket immediately instead of waiting for a RCU grace period,
while the receive path still holds a reference-less pointer to it:
BUG: KASAN: slab-use-after-free in ipv4_pktinfo_prepare+0x30/0x410
Read of size 8 at addr ffff888008806610 by task exploit/207
CPU: 0 UID: 1000 PID: 207 Comm: exploit Not tainted 6.12.95+ #1
ipv4_pktinfo_prepare+0x30/0x410
udp_queue_rcv_one_skb+0x51c/0x1180
udp_unicast_rcv_skb+0x109/0x350
ip_protocol_deliver_rcu+0x14b/0x310
ip_local_deliver_finish+0x29d/0x390
ip_local_deliver+0x24d/0x2a0
Only grab the socket lock when SOCK_TIMESTAMP has to be set,
to keep the common case lockless. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: don't transfer operstate before register
virt_wifi_newlink() calls netif_stacked_transfer_operstate() before
register_netdevice(). If the lower device is dormant, that queues the
new netdev on lweventlist while it is still uninitialized. If
registration fails after that, for example because of an invalid name
such as "bad/name", free_netdev() immediately frees the object. A
later linkwatch_fire_event() then use-after-frees the list entry.
Move the transfer to after netdev_upper_dev_link(), as macvlan and
ipvlan already do. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Reject unregistering netdevs in ib_get_eth_speed
ib_device_get_netdev() intentionally returns a referenced net_device even
when it is unregistering, so matching and cleanup callers can still find
the association. The reference keeps struct net_device allocated, but does
not guarantee that the device remains operational.
ib_get_eth_speed() uses the returned device operationally by invoking its
ethtool callback. Although that call is made under RTNL, the function does
not verify the registration state first. An asynchronous RDMA port query
can therefore call into a netdev after NETDEV_UNREGISTER and ndo_uninit
have completed.
Check for NETREG_REGISTERED while holding RTNL and return -ENODEV for a
device which is being unregistered. Keeping RTNL across the check and the
ethtool operation prevents unregister from starting between them.
Keep the speed fallback and warning under RTNL as well, so the warning can
safely read netdev->name. Drop the netdev reference before releasing RTNL
once all accesses to the device are complete. |
| A flaw was found in xorg-x11-server. In the X Keyboard Extension (XKB), key name memory is allocated with an insufficient buffer size compared to the maximum supported range. An authenticated local client can exploit this flaw by sending requests that modify the keycode range, triggering a heap-based buffer overflow. This vulnerability can lead to arbitrary code execution or cause a Denial of Service (DoS) by crashing the X server. |
| A flaw was found in xorg-x11-server. The GLX (OpenGL Extension to the X Window System) interface fails to verify that incoming data sizes do not exceed allocated buffer limits when handling large rendering requests. An authenticated local client can exploit this vulnerability by sending a specially crafted request, triggering a heap-based buffer overflow. Successful exploitation can result in arbitrary code execution with the privileges of the X server or cause a Denial of Service (DoS) by crashing the application. |
