| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix NULL pointer dereference on unbind with fixed-link
When the device tree describes a fixed-link and has no "mdio" child
node, macb_mii_init() returns early without allocating the MDIO bus,
leaving bp->mii_bus as NULL.
Two cleanup paths then dereference this NULL bus:
1. On driver unbind, macb_remove() unconditionally calls
mdiobus_unregister(bp->mii_bus), which oopses:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000004a8
pc : mdiobus_unregister+0x14/0xa4
lr : macb_remove+0x38/0xa4
Call trace:
mdiobus_unregister+0x14/0xa4 (P)
macb_remove+0x38/0xa4
platform_remove+0x20/0x30
device_release_driver_internal+0x1c8/0x224
unbind_store+0xb4/0xbc
2. On the probe error path in macb_probe(), reached when
macb_mii_init() has succeeded but a subsequent step fails, the
err_out_unregister_mdio label runs the same unconditional cleanup.
mdiobus_unregister() and mdiobus_free() do not guard against a NULL
bus, so guard the calls in both macb_remove() and the probe error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: hhf: clamp quantum in change and init paths
hhf_change() accepts any quantum from userspace, including 1. With a
crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 makes
the deficit-refill loop spin ~2^31 times under the qdisc lock
(a soft lockup / denial of service).
Add max(256U, ...) in hhf_change() matching fq_codel_change(). Clamp
hhf_init() to [256, 1<<20] matching the siblings, and remove the old
fallback that only set quantum=256 on overflow.
Conditions to recreate the bug:
CONFIG_NET_SCH_HHF=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root hhf
tc qdisc change dev dummy0 root hhf quantum 1 stab data 32768 size_log 15 cell_log 0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: defer qdisc freeing after failed creation
An RTM_NEWQDISC request can make clsact bind a populated shared ingress
block during ->init(), publishing an embedded mini_Qdisc to lockless
readers. If the same request has an invalid TCA_RATE, estimator setup
fails after ->init(); the unwind removes the pointer but synchronously
frees its containing qdisc while tc_run() may still hold it.
Retire failed qdiscs through the same RCU helper as normal destruction.
Inline the synchronous free into the callback now that no direct callers
remain. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mv88e6xxx: bound the policy rule dump by the caller's buffer size
mv88e6xxx_get_rxnfc() uses rxnfc->rule_cnt as the write index while
dumping the policy IDR, clobbering the input value before it has been
looked at. That input is the number of entries the caller had room for.
ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the
buffer from the rule_cnt userspace passes in, so once an admin has
installed policy rules any user can ask for fewer slots than there are
rules and run off the end of the allocation. A rule_cnt of 0 leaves the
buffer pointer NULL and the walk dereferences it.
Count into a local so the caller's limit survives the walk, and stop with
-EMSGSIZE once it is reached. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark faultable stack helpers as sleepable
The faultable variants of bpf_get_stack() and bpf_get_task_stack() pass
may_fault=true into the common stack collection code. Resolving user-space
build IDs may then call build_id_parse_file() and block on filesystem
reads.
Neither helper prototype sets might_sleep. Since prototype selection uses
the sleepability of the whole program, the verifier can still allow these
helpers from a non-sleepable region within that program, such as an
explicit RCU or preemption-disabled region. The task-stack helper can also
be called from a non-sleepable timer callback of a sleepable program.
Mark both faultable prototypes as sleepable. The existing helper context
check then rejects these calls while continuing to allow them in genuinely
sleepable contexts. |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of special elements used in an OS command. |
| An integer overflow vulnerability exists in the MPack Node API in MPack 1.1.1 on 32-bit platforms. When parsing a specially crafted MessagePack array32 or map32 object with an excessively large element count, the page allocation size calculation in mpack_tree_parse_children() can overflow size_t and produce an undersized allocation. Subsequent parsing writes mpack_node_data_t records beyond the allocated heap buffer, resulting in heap-buffer-overflow, memory corruption, and denial of service. |
| nDPI 5.1.0 contains a memory access issue in the DNS dissector and serializer deserialization code. Specially crafted network input can cause byte-buffer addresses at odd offsets to be cast to uint16_t or wider integer pointers and directly dereferenced without alignment checks. This results in undefined behavior and can cause process termination in UBSan-instrumented builds or on strict-alignment architectures, leading to denial of service. |
| hiredis commit 29ea279 (post-v1.5.0) contains an uncontrolled memory allocation vulnerability in its RESP aggregate parser. |
| An out-of-bounds write vulnerability in jslGetTokenValueAsString() in Espruino 2v29 (commit bffc6d0) allows crafted JavaScript input containing an overlong token to trigger a one-byte write beyond the JsLex.token buffer in RELEASE/NO_ASSERT builds. The out-of-bounds write corrupts the adjacent tokenValue pointer, resulting in memory corruption and potentially causing application crashes or denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context
Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP
garbage-collection workqueue, rather than the NAPI poll context. For any
unmatched PTP entries carrying an SKB, it calls
mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For
ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end
of that function is the following:
skb->protocol = eth_type_trans(skb, skb->dev);
napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb);
The napi pointer is one that was placed in the SKB control block when the
trapped packet was received in the NAPI context. Later, when the GC reaps
the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to
napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe
if the poll is running concurrently on another CPU.
In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent
softirq processing, but this only applies to the local CPU. Additionally,
its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish()
invokes netif_receive_skb(). This has not been accurate since the
referenced commit; this patch makes that comment accurate again.
mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX
net_device without any conditions. The NAPI instance's poll, which may be
running concurrent to the GC, is running as an independently-scheduled
kthread which may be on a different CPU. The call to local_bh_disable()
does not guard against this.
If a tx-timestamp timeout produces an unmatched entry (which can be easily
reproduced by running ptp4l and waiting for a port to reach the
UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of
a poll on another CPU, both sides mutate the GRO list concurrently, as
shown below:
[39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE
list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy)
Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018
RIP: 0010:__list_add_valid_or_report+0x79/0xb0
RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246
RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540
RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003
R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0
Call Trace:
<TASK>
gro_receive_skb+0xee/0x230
mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum]
mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core]
mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci]
__napi_poll+0x31/0x1e0
napi_threaded_poll_loop+0x16b/0x1c0
napi_threaded_poll+0x71/0xa0
kthread+0xfb/0x260
ret_from_fork+0x22d/0x260
ret_from_fork_asm+0x1a/0x30
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
The machinery that leads to this kernel panic has not been changed between
6.18.48 and mainline.
This patch adds an ingress-delivery helper for the PTP packet_finish()
path that calls netif_receive_skb() instead of napi_gro_receive().
netif_receive_skb(), unlike napi_gro_receive(), can be called from outside
of the NAPI instance's poll context, which can occur at the call site for
this path. RX stats accounting and the skb->dev assignment are still
preserved; the only change is the delivery call itself.
This removes GR
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Clean up the bus when fetching ML caps fails
snd_hdac_ext_bus_get_ml_capabilities() may fail and its return code
shall be checked and accounted for. Address the issue by updating the
error-path for avs_pci_probe().
At the same time, if the function in question succeeds but the next part
of avs_pci_probe() fails, the hlink list shall be cleaned up before
leaving the scope. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark sched_process_wait argument as nullable
do_wait() passes wo->wo_pid to the sched_process_wait tracepoint.
kernel_wait4() leaves wo_pid NULL for wait4(-1), and
kernel_waitid_prepare() does likewise for waitid(P_ALL).
btf_ctx_access() currently types argument 0 as PTR_TO_BTF_ID |
PTR_TRUSTED. Without PTR_MAYBE_NULL, the verifier accepts an unchecked
dereference. Trusted pointer loads have no fault protection, so a wait for
any child can then cause a NULL pointer dereference in JITed BPF code.
Add sched_process_wait to raw_tp_null_args[] with argument 0 marked
nullable. The verifier rejects an unchecked dereference while preserving
access after the program checks the pointer for NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL-ptr-deref in btf_var_show()
btf_var_show() calls btf_type_id_resolve() unconditionally, which
dereferences btf->resolved_ids. That is NULL for a base BTF - e.g. the
vmlinux BTF that bpf_snprintf_btf() renders against - since base BTF is
not resolved during parsing. btf_modifier_show() guards this with
'if (btf->resolved_ids)', but btf_var_show() does not.
A BPF program that passes the type_id of a BTF_KIND_VAR from the vmlinux
BTF to bpf_snprintf_btf() thus NULL-derefs:
KASAN: probably user-memory-access in range [0x46638-0x4663f]
RIP: 0010:btf_var_show (kernel/bpf/btf.c:2929)
Call Trace:
<TASK>
btf_type_show (kernel/bpf/btf.c:8259)
btf_type_snprintf_show (kernel/bpf/btf.c:8329)
bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047)
bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829)
__sys_bpf (kernel/bpf/syscall.c:4804)
do_syscall_64 (arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Resolve the var's type directly with btf_type_skip_modifiers() when
resolved_ids is NULL, mirroring btf_modifier_show(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject key-less BTF for hash maps
map_check_btf() allows a key-less BTF (btf_key_type_id == 0) only for
maps that have a ->map_check_btf callback, and leaves the actual
decision to that callback. Hash maps used to have no ->map_check_btf,
so a key-less BTF was rejected outright.
That changed when htab and rhtab gained a ->map_check_btf to register a
dtor - htab in commit 1df97a7453ee ("bpf: Register dtor for freeing
special fields") and rhtab in commit 6905f8601298 ("bpf: Allow special
fields in resizable hashtab"). Neither looks at the key, so a key-less
hash map now passes map_check_btf() and gets created. Reading it back
through bpffs feeds the key type_id 0 into btf_type_seq_show();
btf_type_by_id() returns the void type, kind_ops[BTF_KIND_UNKN] is NULL,
and btf_type_show() dereferences it:
RIP: 0010:btf_type_show+0x223/0x2e0 kernel/bpf/btf.c:8232
RSP: 0018:ffffc9000399f868 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000005 RSI: 0000000000000000 RDI: 0000000000000028
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffffc9000399f970 R11: 0000000000000001 R12: ffffffff9b96b140
R13: ffffc9000399f8e0 R14: ffff88803d393c00 R15: 0000000000000003
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000000000 CR3: 000000003d213000 CR4: 0000000000352ef0
DR0: 0000000039ae8f55 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btf_type_seq_show_flags+0xca/0x120 kernel/bpf/btf.c:8250
htab_map_seq_show_elem+0x12e/0x350 kernel/bpf/hashtab.c:1669
map_seq_show+0x13d/0x1e0 kernel/bpf/inode.c:293
traverse.part.0.constprop.0+0x107/0x650 fs/seq_file.c:112
traverse fs/seq_file.c:99 [inline]
seq_read_iter+0x93f/0x1270 fs/seq_file.c:196
seq_read+0x344/0x4d0 fs/seq_file.c:163
vfs_read+0x1e4/0xb40 fs/read_write.c:572
ksys_pread64 fs/read_write.c:764 [inline]
__do_sys_pread64 fs/read_write.c:772 [inline]
__se_sys_pread64 fs/read_write.c:769 [inline]
__x64_sys_pread64+0x1eb/0x250 fs/read_write.c:769
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reject a key-less BTF in htab_map_check_btf() and rhtab_map_check_btf(),
restoring the previous behavior. |
| In PortSwigger Burp Suite DAST (formerly Burp Suite Enterprise Edition) before 2026.8, an authentication bypass can occur via an alternate path or channel. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Acquire init_mm write lock on collapse to avoid UAF
x86 implements page attribute modification using its Change Page
Attributes (CPA) mechanism.
This tracks properties of ranges such as cache mode through x86 page
attributes, and as part of that logic manipulates kernel page tables.
Since commit:
41d88484c71c ("x86/mm/pat: restore large ROX pages after fragmentation")
ranges of kernel page table entries can be collapsed into
huge page table entries as part of this logic.
As part of this collapse, it frees the page tables which the collapsed
entries previously pointed to, and it does so without any relevant locks
being held to preclude concurrent kernel page table walkers.
The only way this code can be reached is if CPA_COLLAPSE is specified, and
this is only set in set_memory_rox() via:
set_memory_rox()
-> change_page_attr_set_clr()
-> cpa_flush()
-> cpa_collapse_large_pages()
Notable users of this are execmem and BPF when manipulating executable
mappings.
However, this is problematic for ptdump as it walks ranges it does not own
and thus runs the risk of a use-after-free on page tables freed underneath
it.
In addition, concurrent CPA collapse operations are possible which can also
cause races.
Resolve the issue by acquiring the mmap write lock on init_mm across the
whole operation.
It is safe to acquire a sleeping lock as all the callers invoke
set_memory_rox() from process context and in any case,
change_page_attr_set_clr() calls vm_unmap_alias() which ultimately takes a
mutex, disallowing atomic context here. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: reset HTB scheduler topology before freeing queues
HTB offload programs NIX_AF_TLxX_TOPOLOGY on QoS-allocated scheduler
queues via otx2_qos_txschq_set_parent_topology(), but teardown freed
those queues without clearing TOPOLOGY. The AF only restores PARENT and
SCHEDULE on free, so PRIO_ANCHOR/RR_PRIO settings can survive in the
shared scheduler pool and affect later allocations.
Add otx2_qos_reset_schq_topology() and otx2_qos_free_hw_schq() to zero
TL4 through TL2 TOPOLOGY before each schq is returned to the AF during
hierarchy teardown and cfg rollback. Skip the aggregation level (TL1):
it is a per-tx-link queue shared by the PF, default Tx hierarchy and VFs,
and is not freed back to the AF by nix_txschq_free_one(). |
| In the Linux kernel, the following vulnerability has been resolved:
virtio: fix use-after-free in unregister_virtio_device()
device_unregister() is device_del() plus put_device(). When the caller
holds no extra reference, that drops the last one and runs the release
callback, which for several transports frees the memory the embedded
struct virtio_device sits in. unregister_virtio_device() then calls
virtio_debug_device_exit(), which reads dev->debugfs_dir out of the freed
object.
Affected transports are the ones whose release callback frees and whose
remove path takes no reference: virtio_mmio, virtio_vdpa, virtio_uml,
mlxbf-tmfifo and virtio_ccw. virtio_pci is unaffected because
virtio_pci_remove() brackets the call with get_device() and put_device().
Remove the debugfs entries before the device can go away. They are only
accessed through the protected debugfs interface, so
debugfs_remove_recursive() waits for in-progress file operations before
returning. Tearing them down while the device is still alive is therefore
safe.
Reproduced on User-Mode Linux with CONFIG_KASAN and CONFIG_VIRTIO_DEBUG
by unbinding a virtio-uml device:
BUG: KASAN: slab-use-after-free in virtio_debug_device_exit+0x36/0x4d
Read of size 8 at addr 00000000616e0b10 by task init/1
__asan_report_load8_noabort
virtio_debug_device_exit+0x36/0x4d
unregister_virtio_device+0x48/0x75
virtio_uml_remove
platform_remove
device_release_driver_internal
unbind_store
Freed by task 1:
kfree
virtio_uml_release_dev
device_release
kobject_put
put_device
device_unregister
With this applied, the report is gone and unbind is clean. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: delimit inode_share cache key components
Previously, inode_share keys were encoded as follows:
fingerprint || domain_id
It would be better to have a separator between the fingerprint and domain
ID so that the fingerprint won't be parsed as part of a domain ID.
Change the key encoding as follows:
domain_id || '\0' || fingerprint
Since domain_id is a NUL-terminated string, this makes the in-memory key
indices unambiguous. |
