| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix circular locking dependency in ocfs2_init_acl()
A lockdep warning indicates a circular locking dependency between
`&oi->ip_xattr_sem` and `&journal->j_trans_barrier`:
WARNING: possible circular locking dependency detected
is trying to acquire lock:
(&oi->ip_xattr_sem){++++}-{4:4}, at: ocfs2_init_acl+0x2fd/0x7e0
fs/ocfs2/acl.c:367
but task is already holding lock:
(&journal->j_trans_barrier){.+.+}-{4:4}, at: ocfs2_start_trans+0x3ab/0x700
fs/ocfs2/journal.c:369
The deadlock involves two code paths: Path 1 (setxattr) where
`ocfs2_xattr_set()` acquires `ip_xattr_sem` (write) and then starts a
transaction, which acquires `j_trans_barrier` (read); and Path 2
(mkdir/mknod) where `ocfs2_mknod()` starts a transaction (`j_trans_barrier`
read) and then calls `ocfs2_init_acl()`, which attempts to acquire
`ip_xattr_sem` (read) on the parent directory to retrieve the default ACL.
Because rw_semaphores are subject to writer priority, a pending writer on
`j_trans_barrier` (e.g., the journal commit thread) can cause Path 1 to
block, while Path 2 is blocked waiting for Path 1 to release
`ip_xattr_sem`.
The patch fixes the lock ordering by precomputing the ACL state before
starting the OCFS2 transaction, while preserving POSIX ACL storage
semantics and the existing inode/security initialization order. By reading
the parent directory's default ACL and preparing the new inode's ACLs
outside the transaction, `ip_xattr_sem` is always acquired before
`j_trans_barrier`.
`struct ocfs2_acl_state` encapsulates the prepared ACL state, while
`ocfs2_acl_init_prepare()` and `ocfs2_acl_init_release()` avoid code
duplication between `ocfs2_mknod()` and `ocfs2_init_security_and_acl()`.
`ocfs2_calc_xattr_init()` and `ocfs2_init_acl()` use this precomputed
state, removing internal `ip_xattr_sem` acquisition and redundant disk
reads.
Additionally, remove the `ip_xattr_sem` acquisition from
`ocfs2_xattr_set_handle()`. This function is only used while initializing a
new inode that has not yet been inserted into the inode hash or attached to
a dentry, meaning there is no risk of concurrent access and the lock is
unnecessary. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: bus: Introduce acpi_bus_get_primary_device()
The function used for obtaining the first "physical" device for which
the given ACPI one is the ACPI companion, acpi_get_first_physical_node(),
may return a stale device pointer (mostly in theory) because
acpi_unbind_one() may run as a whole after dropping the ACPI device's
physical_node_lock in acpi_get_first_physical_node() and before it
returns. The last reference to the "physical" device may be dropped
then before the pointer to it is returned to the caller.
If that happens and the acpi_get_first_physical_node() caller invokes
get_device() on the pointer obtained from it, which is done by the
majority of its callers, a use-after-free will occur.
To prepare for addressing this problem, introduce a new function for
getting the first "physical" device associated with the given ACPI one
(the "primary physical device") that will also reference count the
device in question before returning a pointer to it.
Make that new function and acpi_get_first_physical_node() share the
physical node list lookup code.
No intentional functional impact. |
| Deserialization of untrusted data in the command monitoring support of the MongoDB PHP Driver can cause class names embedded in document content to be honored when the driver builds monitoring event objects. When an application registers a command monitoring subscriber and includes untrusted data in a database operation, an unauthenticated party who controls that data may cause an application class implementing the driver's persistable interface to be instantiated and its unserialization method invoked with the supplied data. The resulting impact depends on the classes available in the application. |
| An out-of-bounds write in the connection-monitoring logic of the MongoDB C Driver may allow an unauthenticated party who controls name resolution and the responses of the hosts named in a client's connection string to write beyond the end of a heap buffer. This may cause the application using the driver to terminate unexpectedly. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix use-after-free in vxlan_mdb_flush()
vxlan_mdb_flush() iterates over the MDB entries using
hlist_for_each_entry_safe(), which only tolerates the removal of the
current entry. Contrary to the comment above the loop, the removal of an
entry can trigger the removal of another entry.
Flushing the remotes of a (*, G) entry also removes the (S, G) entries
that were created for its source list, once they are left without
remotes:
vxlan_mdb_remotes_flush()
-> vxlan_mdb_remote_del()
-> vxlan_mdb_remote_srcs_del()
-> vxlan_mdb_remote_src_del()
-> vxlan_mdb_remote_src_fwd_del()
-> __vxlan_mdb_del()
-> vxlan_mdb_entry_put()
Such an entry can be located after the (*, G) entry in the list, as
vxlan_mdb_entry_get() returns an existing entry without moving it to the
head of the list. This order is obtained by adding the (S, G) entry
before the (*, G) entry, the latter with NLM_F_REPLACE, as the addition
of the source otherwise fails with -EEXIST. The (S, G) entry is then the
entry saved by hlist_for_each_entry_safe() and it is freed while the
(*, G) entry is processed. The next iteration calls hlist_del() on it
again, writing LIST_POISON1 to LIST_POISON2 [1].
Besides device deletion, the flush is also reachable from RTM_DELMDB
with NLM_F_BULK.
Fix by re-reading the next entry after the remotes were flushed. The
current entry cannot be removed by this flush, as source lists can only
be configured on (*, G) entries and the removed entries are (S, G)
entries. It is therefore still linked and its next pointer reflects the
removals.
[1]
BUG: KASAN: wild-memory-access in vxlan_mdb_entry_put.part.0+0x328/0x588
Write of size 8 at addr dead000000000122 by task ip/327
CPU: 3 UID: 1000 PID: 327 Comm: ip Not tainted 7.2.0-rc7 #2 PREEMPT
Call trace:
vxlan_mdb_entry_put.part.0+0x328/0x588
vxlan_mdb_flush+0x1d8/0x25c
vxlan_mdb_fini+0x8c/0x100
vxlan_uninit+0x1c/0x7c
unregister_netdevice_many_notify+0x954/0xd4c
rtnl_dellink+0x210/0x530
rtnetlink_rcv_msg+0x434/0x4d0
netlink_rcv_skb+0xc4/0x204
rtnetlink_rcv+0x18/0x24
netlink_unicast+0x4b8/0x548
netlink_sendmsg+0x29c/0x560
____sys_sendmsg+0x390/0x3ec
___sys_sendmsg+0x114/0x188
__sys_sendmsg+0xf0/0x178
__arm64_sys_sendmsg+0x48/0x60
invoke_syscall.constprop.0+0x58/0x180
el0_svc_common.constprop.0+0x74/0x140
do_el0_svc+0x30/0x40
el0_svc+0x38/0x98
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c |
| In the Linux kernel, the following vulnerability has been resolved:
spi: amlogic-spisg: Make sure clk_init_data is fully initialized
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
aml_spisg_clk_init() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter in uninitialized, and
thus may cause a crash.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| MongoDB Compass can interpolate a database name without escaping into the initial input of its embedded MongoDB shell when a user opens the shell from that database's view. A user with privileges to create databases on a server that a Compass user connects to may, under specific conditions, have content evaluated as shell input within the Compass process, with that process's privileges. This requires the Compass user to open the shell for the affected database. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: don't WARN on kernel job timeout when device already wedged
igt@xe_wedged@wedged-at-any-timeout wedges the device in mode 2
(UPON_ANY_HANG_NO_RESET) and then rebinds the driver. During unbind,
a GSC proxy kernel submission can still time out; with the device wedged
and the GuC CT stopped it can never complete, so its kernel job times out.
Tile0: GT1: Kernel-submitted job timed out
WARNING: drivers/gpu/drm/xe/xe_guc_submit.c:...
at guc_exec_queue_timedout_job()
Workqueue: gt-ordered-wq drm_sched_job_timedout
Killed queues skip guc_submit_hint_wedged(), leaving 'wedged' false even
though the device is already wedged. The timeout handler then treats the
kernel queue timeout as unexpected and taints the kernel.
Honour an already-wedged device even for killed queues so the expected
teardown timeout no longer trips the WARN.
(cherry picked from commit a1c1dbd0f047bb05de6aaf6abe9103031179bf19) |
| Improper neutralization of special elements in data query logic in the cache lock implementation of the MongoDB integration for Laravel can cause a caller-supplied lock owner value to be evaluated as an aggregation expression rather than as a literal value. An authenticated user who can influence the owner value an application uses when acquiring or restoring a lock may take over or prematurely expire a lock held by another process, which can lead to duplicated or conflicting operations. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix 'hdev->discovery.uuids' NULL dereference
'uuid_count' member of struct 'discovery_state' is assigned and read
without any locks, so there is a chance of situation when
uuid_count != 0, but uuids is NULL and there will be NULL pointer
dereference.
Possible race:
'hci_update_passive_scan_sync'
'hci_discovery_filter_clear'
hdev->discovery.uuid_count = 0;
<----------------------preempted----------------------------->
'start_service_discovery'
// Set uuid_count to value != 0
hdev->discovery.uuid_count = uuid_count;
hdev->discovery.uuids = kmemdup(...);
<----------------------preempted----------------------------->
spin_lock(&hdev->discovery.lock);
kfree(hdev->discovery.uuids);
hdev->discovery.uuids = NULL;
spin_unlock(&hdev->discovery.lock);
Now uuids == NULL and uuid_count != 0.
So 'mgmt_device_found' -> 'is_filter_match' -> 'eir_has_uuids' receives
non consistent discovery state, where NULL dereference of uuids happens.
To fix it let's add discovery.lock around every read/write of uuid_count,
uuids pair of struct members. It is also important to assign uuid_count
value only after success kmemdup() allocation in
start_service_discovery(), otherwise uuids is NULL, because kmemdup failed,
but uuid_count is already assigned to non zero value.
The following panic happens:
[ ] ------------[ cut here ]------------
[ ] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[ ] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
[ ] CPU: 0 PID: 15056 Comm: kworker/u9:2
[ ] Workqueue: hci0 hci_rx_work
[ ] pstate: 10400009 (nzcV daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ ] pc : eir_has_uuids+0x2d8/0x590
[ ] lr : is_filter_match+0x258/0x320
...
[ ] Call trace:
[ ] eir_has_uuids+0x2d8/0x590
[ ] is_filter_match+0x258/0x320
[ ] mgmt_device_found+0x5b0/0xafc
[ ] process_adv_report.part.0+0x8c8/0xf14
[ ] hci_le_adv_report_evt+0x338/0x3f0
[ ] hci_le_meta_evt+0x1f0/0x4c8
[ ] hci_event_packet+0x440/0xc9c
[ ] hci_rx_work+0x44c/0xaf8
[ ] process_one_work+0x54c/0x103c
[ ] worker_thread+0x6c4/0x10c4
[ ] kthread+0x274/0x2ec
[ ] ret_from_fork+0x10/0x20
[ ] Code: 14000004 91004021 eb14003f 54000180 (f9400024)
[ ] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: fix out-of-bounds read setting MSI-X irq affinity
rvu_register_interrupts() walks every MSI-X vector and uses strstr()
to match "Mbox" or "FLR" in irq_name before pinning those interrupts
to CPU 0. irq_name is a per-vector NAME_SIZE buffer, but not every
slot is populated before this loop runs. strstr() keeps scanning until
it finds a NUL terminator, so an uninitialized slot can trigger a KASAN
slab-out-of-bounds read at boot when debug options are enabled.
Use strnstr() with NAME_SIZE to bound the search within each vector's
name buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: policy_int make sure list heads are initialized before fail path
If profile create fails before policy_init is complete the list heads
are not properly initialized causing profile_free() sanity checks to
trigger the following splat.
AppArmor WARN aa_policy_destroy: (((!list_empty(&policy->profiles) && (&policy->profiles)->prev != ((void *) 0x122 + (0xdead000000000000UL))))):
WARNING: security/apparmor/lib.c:509 at aa_policy_destroy+0x164/0x1b0 security/apparmor/lib.c:509, CPU#0: syz.0.17/5541
Modules linked in:
CPU: 0 UID: 0 PID: 5541 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:aa_policy_destroy+0x16b/0x1b0 security/apparmor/lib.c:509
Code: 85 ed 7e 4d e8 96 bc 37 fd 5b 41 5c 41 5e 41 5f 5d e9 19 27 4e 07 cc e8 83 bc 37 fd 48 8d 3d 0c f0 d3 0b 48 c7 c6 a4 eb 38 8e <67> 48 0f b9 3a e9 04 ff ff ff e8 66 bc 37 fd 48 8d 3d ff ef d3 0b
RSP: 0018:ffffc9000345eaa0 EFLAGS: 00010293
RAX: ffffffff848f530d RBX: ffff88803f734800 RCX: ffff88801af2a580
RDX: 0000000000000000 RSI: ffffffff8e38eba4 RDI: ffffffff90634320
RBP: 0000000000000000 R08: 0000000000000cc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff1d95913 R12: dead000000000122
R13: ffff88803f734800 R14: ffff88803f734828 R15: dffffc0000000000
FS: 00007f5f6a1836c0(0000) GS:ffff88808c519000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d02407b048 CR3: 0000000012aa9000 CR4: 0000000000352ef0
Call Trace:
<TASK>
aa_free_profile+0x9d/0x9f0 security/apparmor/policy.c:334
aa_alloc_profile+0x1e4/0x3e0 security/apparmor/policy.c:416
unpack_profile security/apparmor/policy_unpack.c:1153 [inline]
aa_unpack+0x17db/0x7430 security/apparmor/policy_unpack.c:1748
aa_replace_profiles+0x226/0x2a20 security/apparmor/policy.c:1183
policy_update+0x234/0x4a0 security/apparmor/apparmorfs.c:505
profile_load+0x1cb/0x320 security/apparmor/apparmorfs.c:522
vfs_write+0x296/0xba0 fs/read_write.c:685
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f6939e0d9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5f6a183028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f5f69625fa0 RCX: 00007f5f6939e0d9
RDX: 0000000000000041 RSI: 0000200000000400 RDI: 0000000000000003
RBP: 00007f5f6a183090 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007f5f69626038 R14: 00007f5f69625fa0 R15: 00007ffe23725c18 |
| In get_eht_operation_channel_width of ieee802_11_common.c, there is a possible out of bounds read due to an incorrect bounds check. This could lead to remote (proximal/adjacent) information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In tt_face_colr_blend_layer of ttcolr.c, there is a possible remote code execution due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible memory safety issue due to a heap buffer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. From 2.5.0 until 2.5.1, Termix allows authenticated users to configure webhook or ntfy notification channels with attacker-controlled destination URLs and trigger server-side requests through the notification-channel test endpoint. The request path in src/backend/database/routes/alert-rules-routes.ts reaches src/backend/utils/notification-sender.ts without destination allowlisting or private-address blocking. This permits blind requests to internal HTTP services reachable by the Termix server. Webhook mode also permits attacker-controlled HTTP methods and headers, which can cause limited state changes when an internal service accepts the fixed notification body, although response bodies are not returned. This issue is fixed in version 2.5.1. |
| In multiple locations, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| NanoSVG commit 239e102ec contains an incorrect numeric conversion vulnerability in the rasterizer's nsvg__addActive() function. A specially crafted SVG document containing sufficiently large geometry coordinates can cause fixed-point-scaled edge coordinates to exceed the range representable by int. The rasterizer subsequently converts these values to int without range validation, resulting in undefined behavior and possible process termination, leading to denial of service. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, the patch.readRepoDirectories tRPC procedure passes the user-controlled repoPath value from apps/dokploy/server/api/routers/patch.ts into a shell command in packages/server/src/services/patch-repo.ts without safe argument quoting. An authenticated organization member with service:read permission can inject shell metacharacters into repoPath and execute arbitrary commands through child_process.exec as root in the Dokploy container. The supplied service identifier is used only to resolve the server and does not constrain repoPath. Because the standard deployment mounts /var/run/docker.sock, container-root command execution can be used to control Docker and compromise the host and its managed applications. This issue is fixed in version 0.29.13. |
