| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix missing kunmap in afs_dir_search_bucket()
Fix afs_dir_search_bucket() to kunmap the block it's using in the "bad:"
path. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: RISC-V: store available counter mask as bitmap
The available-counter mask was a single unsigned long, but iteration
uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object.
Filling with an unsigned-long bit at index 32 and above is also wrong.
Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word
into CFG_MATCH when checking events, when allocating an index, and when
stopping all counters. Set the counter base to i times BITS_PER_LONG.
Share the CFG_MATCH ecall through a small helper so the 32-bit argument
split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits
above XLEN set, so the first word alone is not enough.
[pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix missing scrub of temp buffers with AES ctr and gcm algorithm
In function ctr_aes_crypt() there is a buffer used to process
remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and
thus could lead to expose of unwanted data. When the buffer is used
explicitly scrub it at the end of the code block to avoid exposure of
maybe sensitive data.
In a similar way the function gcm_aes_crypt() hat an error path where
the CPACF param block was not scrubbed. Instead of return early now
these error paths go to end of function where explicit scrubbing is
done. Similar with the buffers which are part of the gcm_sg_walk
structs from the variables gw_in and gw_out. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_log: unregister loggers before per-net teardown
nf_log_syslog and nfnetlink_log unregister their per-network namespace
operations before unregistering their global logger backends. This
leaves a window where a sysctl or netlink writer can rebind the still-
registered logger after the per-net pre-exit callback cleared the old
selection.
The race looks like this:
CPU 0 CPU 1
---- ----
unregister_pernet_subsys()
nf_log_unset(net, logger)
net->nf.nf_loggers[pf] = NULL
lock nf_log_mutex
find logger in loggers[][]
net->nf.nf_loggers[pf] = logger
unlock nf_log_mutex
nf_log_unregister(logger)
lock nf_log_mutex
loggers[pf][type] = NULL
unlock nf_log_mutex
synchronize_rcu()
module exit returns
module core frees backend memory
Later, a sysctl read or packet logging operation can dereference the
stale per-net logger pointer.
Fix this by unregistering the global logger backends before tearing down
per-net state. Once the global registrations are gone, later writers can
no longer rebind the logger. unregister_pernet_subsys() already waits
for an RCU grace period after the pre-exit callback clears the per-net
selection, while nf_log_unregister() continues to cover readers of the
global logger table.
Apply this ordering fix to both nf_log backends that combine per-net
teardown with global logger registration. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix use-after-free of the flow table mask array
tbl_mask_array_realloc() retires the old mask_array before it stops being
reachable:
old = ovsl_dereference(tbl->mask_array);
if (old) {
...
call_rcu(&old->rcu, mask_array_rcu_cb);
}
rcu_assign_pointer(tbl->mask_array, new);
call_rcu() only waits for read-side critical sections already in flight.
tbl->mask_array still points at old between the call_rcu() and the
rcu_assign_pointer(), so a reader entering ovs_flow_tbl_lookup_stats() in
that window picks up old in a fresh critical section that the pending
grace period does not cover.
tbl_mask_array_realloc() runs in process context under ovs_mutex, so the
window is preemptible and can outlast the grace period. Then
mask_array_rcu_cb() frees old before the swap runs:
BUG: KASAN: slab-use-after-free in flow_lookup.constprop.0+0x2bf/0x2f0
Read of size 8 at addr ffff888020b3e018 by task poc/741
flow_lookup.constprop.0+0x2bf/0x2f0
ovs_flow_tbl_lookup_stats+0x4a3/0x5c0
ovs_dp_process_packet+0x19c/0x710
ovs_vport_receive+0x243/0x390
internal_dev_xmit+0x81/0x170
Freed by task 728:
kfree+0x16a/0x4e0
rcu_core+0x853/0x1030
Publish the new array before retiring the old one. The kfree_rcu() that
call_rcu() replaced ran after the swap. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: don't return -EINVAL for successful nested thaw
Commit 7366f8b6fc6a ("fs: handle freezing from multiple devices")
replaced the freeze_holders bitmask with per-holder counters to allow
nested freezes. In the bitmask version, a thaw that released a shared
hold while another holder remained returned 0. Since the rework,
thaw_super_locked() drops the freeze reference via freeze_dec() but
then returns -EINVAL when other freezers remain, misinforming the
caller: the thaw did succeed, the superblock just stays frozen for the
remaining holders.
This breaks bdev-initiated freezing. When a filesystem is frozen with
FIFREEZE and additionally frozen via bdev_freeze() -- which nests by
design, see fs_bdev_freeze() -- the subsequent bdev_thaw() receives
-EINVAL from the holder op although its freeze reference was dropped,
and therefore keeps bd_fsfreeze_count elevated. Then device-mapper's
unlock_fs() ignores bdev_thaw()'s return value, so nothing rebalances
the count. After the user's FITHAW and umount, the block device can
never be mounted again:
dm-1: Can't mount, blockdev is frozen
There is no way for userspace to drop the leaked count; only
destroying the block device (or a reboot) recovers the device.
Reproducer (any kernel since v6.8):
dmsetup create dut --table "0 $(blockdev --getsz "$DEV") linear $DEV 0"
mkfs.ext4 /dev/mapper/dut
mount /dev/mapper/dut /mnt
fsfreeze --freeze /mnt # freeze_ucount == 1
dmsetup suspend dut # bd_fsfreeze_count == 1, ucount == 2
dmsetup resume dut # ucount 2 -> 1, but thaw_super()
# returns -EINVAL, so bdev_thaw()
# keeps bd_fsfreeze_count at 1
fsfreeze --unfreeze /mnt # filesystem thaws fine
umount /mnt
mount /dev/mapper/dut /mnt # EBUSY, forever
The same happens with fsfreeze held across an LVM snapshot of the
origin volume.
fs_bdev_thaw()'s documentation already describes the intended
semantics: "If this function returns zero it doesn't mean that the
filesystem is unfrozen as it may have been frozen multiple times".
Restore them by returning 0 when a nested thaw drops its hold while
other freezers remain. Thawing without holding a freeze still fails
with -EINVAL as may_unfreeze() rejects that case before the reference
count is touched. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix fib6 walker UAF on seq stop
ipv6_route_iter_active() treats a walker in FWS_U at the table root as
already unlinked. fib6_del_route() can move a still-linked walker into
that same state when the current leaf is the last route at the root,
so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq
private object can then be freed while it remains on
net->ipv6.fib6_walkers. A later route deletion walks the dangling list
and uses the freed walker.
Use the list head as membership state and reinitialize it when
unlinking. Keep the existing w->node check so a never-started iterator
with a zeroed private object is not treated as linked.
The same stop helper is used by /proc/net/ipv6_route and by the BPF
ipv6_route iterator. The BPF show path only widens the race. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: bail out on bitmap errors in xrep_agfl_fill
LOLLM also points out that the xagb_bitmap_set call in xrep_agfl_fill
can fail, but we don't check the result of xagb_bitmap_walk, so we
silently drop the error and proceed with inconsistent incore data.
That shouldn't be allowed. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START
The SCTP_CMD_TIMER_START handler checks timer_pending() before calling
timer_reduce(). The timer can expire and detach between these operations,
causing timer_reduce() to rearm the timer without taking the association
reference required for the newly armed timer.
The timer callback later unconditionally drops its association reference,
which can leave the association reference count unbalanced and result in
use-after-free during association teardown.
Use the return value of timer_reduce() to determine whether the timer was
actually armed. Take the association reference only when timer_reduce()
successfully starts a new timer, closing the race between checking the
timer state and rearming it.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Fix srpt_alloc_rw_ctxs() unwind counters
When srpt_alloc_rw_ctxs() fails partway through a multi-buffer indirect
descriptor, the unwind path destroys RDMA contexts but leaves stale
n_rw_ctx and n_rdma values (and a dangling rw_ctxs pointer). Later
sq_wr_avail accounting in srpt_queue_response() or srpt_write_pending()
can then subtract the wrong number of send queue credits.
Reset the counters and clear rw_ctxs after freeing the heap
allocation before returning an error. |
| The mysqlnd wire protocol parser reads fields out of server packets before checking that the packet still holds enough bytes for them. A malicious or compromised MySQL server can send a truncated packet and make the client read past the end of the packet buffer, which is undefined behaviour and can crash the process. |
| php_openssl_matches_wildcard_name() in ext/openssl/xp_ssl.c underflows the length argument passed to memchr() when a TLS server certificate presents a wildcard name whose literal characters are together longer than the hostname being verified. A malicious server presenting such a certificate makes the PHP client read up to SIZE_MAX bytes past the end of a heap allocation. The path is reachable from any default client stream, because verify_peer_name is enabled by default. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't leak dqacct if rhashtable insertion fails
LOLLM observes that xqcheck_mod_live_ino_dqtrx doesn't free the newly
allocated dqa object if rhashtable insertion fails. Fix this leak. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't leak new_bp if xfs_btree_bload_drop_buf fails
LOLLM observes that in xfs_btree_bload_prep_block,
xfs_btree_bload_drop_buf can hit an IO error if writing the delwri
buffer list to disk fails. In this case, we fail to release new_bp,
which means we lose a locked buffer. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't spin forever on zero-length dirents when salvaging them
LOLLM noticed that xrep_dir_recover_data can spin forever if it
encounters an unused dirent that claims to have length zero. Fix that,
and prevent the same thing from happening with a zero-length entry. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: initialise args->total for parent pointer updates
xfs_parent_da_args_init() builds an xfs_da_args from a zeroed
xfs_parent_args (kmem_cache_zalloc), leaving args->total == 0.
xfs_da_grow_inode_int() treats that field as a running block reservation
and subtracts from it; because it is an xfs_extlen_t (uint32_t), the
first attr-fork growth wraps it to ~0U. That defeats the free-space
check in xfs_alloc_space_available(), and when it coincides with an AG
that has exactly zero available blocks the allocation is clamped to
maxlen 0 and returns -ENOSPC, which xfs_defer_finish_noroll() escalates
to a filesystem shutdown.
Set args->total the way the log recovery path does
(xfs_attri_recover_work(), xfs_attr_item.c:706), in the add and replace
paths that can grow the fork. Removals and lookups never grow it, so
they leave the field alone, matching that switch. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: initialise error in xfs_defer_finish_one()
xfs_defer_finish_one() declares error without an initialiser and only
assigns it inside the loop over dfp->dfp_work. When that list is empty
the loop body never runs, control falls through to the "Done with the
dfp, free it" path, and the function returns an indeterminate value.
An item-less pending item reaches this through xfs_defer_add_barrier(),
which xfs_reap_ag_blocks() uses on any CONFIG_XFS_ONLINE_REPAIR kernel.
xfs_defer_finish_noroll() treats any non-EAGAIN return as fatal, so a
non-zero stack value turns a successful barrier into a
SHUTDOWN_CORRUPT_INCORE in the middle of a repair. Zero is the correct
result: reaching the free path means the item loop drained without a
non-zero error. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount when cifs_sb_tlink() fails
cifs_oplock_break() takes over the reference that
cifs_queue_oplock_break() acquired when it queued the work, and drops it
with _cifsFileInfo_put() once the break has been processed.
Only in setups with "-o multiuser", cifs_sb_tlink() may fail, at which
point cifs_oplock_break() returns without putting the file reference,
mirroring the reference leak we already fixed in the companion patch to
cifs_queue_oplock_break().
This would trigger a crash due to busy inodes on the next unmount:
BUG: Dentry ... still in use (1) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
Drop the reference on that path as well. Doing so before the out label
mirrors the normal path, which also puts the reference before
cifs_done_oplock_break().
Found by Sashiko code review. The failure path was not exercised at
runtime. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix one-byte OOB read in smb2_parse_native_symlink()
When parsing a share-root relative native symlink, memcpy copies
smb_target+1 (skipping the leading separator) but uses
strlen(smb_target)+1 as the length, reading one byte past the
allocated buffer.
This fixes the following KASAN splat when accessing an SMB symlink
with a target of '\a\b':
BUG: KASAN: slab-out-of-bounds in smb2_parse_native_symlink+0x4f5/0xca0
Read of size 5 at addr ffff88800878fe21 by task netfsfuzz-execu/1
CPU: 1 UID: 0 PID: 1 Comm: netfsfuzz-execu Tainted: G N
7.2.0-11943-g2709dd5ae32f-dirty #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix,
1996)
Call Trace:
<TASK>
dump_stack_lvl+0x7b/0xa0
print_report+0xd0/0x630
kasan_report+0xe5/0x120
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x23/0x60
smb2_parse_native_symlink+0x4f5/0xca0
parse_reparse_point+0x68a/0x1530
reparse_info_to_fattr+0x752/0xa20
cifs_get_fattr+0x873/0x15b0
cifs_get_inode_info+0xc0/0x310
cifs_lookup+0x308/0xa70
__lookup_slow+0x122/0x2b0
lookup_slow+0x50/0x70
path_lookupat+0x525/0xaf0
filename_lookup+0x1f2/0x550
vfs_statx+0xd1/0x1a0
vfs_fstatat+0x65/0xc0
__do_sys_newfstatat+0x9a/0x120
do_syscall_64+0xdd/0x4a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid
When the administrator mounts with forceuid or forcegid (uid=/gid=
mount options), they expect all files to appear owned by the specified
user/group. However, several code paths unconditionally called
sid_to_id() to overwrite cf_uid/cf_gid with server-provided values,
ignoring the administrator's explicit override:
- smb311_posix_info_to_fattr() (stat via POSIX extensions)
- cifs_posix_to_fattr() (readdir via POSIX extensions)
- parse_sec_desc() (CIFS ACL ownership mapping)
This allowed an untrusted server to dictate local file ownership even
when the mount was configured to force specific uid/gid values.
Fix all three call sites to check CIFS_MOUNT_OVERR_UID and
CIFS_MOUNT_OVERR_GID before calling sid_to_id(), following the
same pattern already used by cifs_unix_basic_to_fattr() for unix
extensions. |
