| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix cifsFileInfo reference leak in deferred close
When cifs_close() defers a close, it hands the cifsFileInfo reference
of the closing struct file to the queued work. Each execution of
smb2_deferred_work_close() drops one such reference.
deferred_close_scheduled can be false while the work is pending: the
workqueue clears PENDING when the callback starts to run, before the
callback clears the flag under deferred_lock. A close in that
interval requeues the running work, and the callback then clears the
flag, leaving the requeued work pending with the flag down. A later
cifs_open() can reuse the handle and its cifs_close() reaches the
same branch: queue_delayed_work() fails because the work is still
pending, but cifs_close() returns without dropping the closing file's
reference. The cifsFileInfo count stays pinned and its tlink, dentry
and server handle are leaked.
Check the return value and hand off the reference only when work was
actually queued. Otherwise, use the shared _cifsFileInfo_put(), like
the mod_delayed_work() branch above: the pending execution already
owns its reference.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix under-reservation of blocks when repairing sf directories
Whilst running QA on XFS for-next as of 7.3-rc2 with MKFS_OPTIONS="-n
size=8192", I observed the following (trimmed) dmesg splat:
XFS: Assertion failed: args->total >= dp->i_nblocks - nblks, file: fs/xfs/libxfs/xfs_da_btree.c, line: 2387
WARNING: fs/xfs/xfs_message.c:104 at assfail+0x46/0x4a [xfs], CPU#0: xfs_scrub/1426511
CPU: 0 UID: 0 PID: 1426511 Comm: xfs_scrub Tainted: G W 7.3.0-rc2-djwx #rc2 PREEMPT(lazy) 6e418570b606a39783b0e7e7b30dc407b965f9e8
Tainted: [W]=WARN
RIP: 0010:assfail+0x46/0x4a [xfs]
RSP: 0018:ffffc900010d7890 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000ffffffd1
RDX: 0000000000000000 RSI: 0000000000000021 RDI: ffffffffa059fd38
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000000a R11: 000000007fffffff R12: ffffc900010d7940
R13: ffff888368d8f980 R14: ffffc900010d7a48 R15: ffffc900010d78d0
FS: 00007f445c5ce680(0000) GS:ffff8884a97ea000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f443803b9a8 CR3: 0000000107a4b000 CR4: 00000000003506f0
Call Trace:
<TASK>
xfs_da_grow_inode_int+0x2e0/0x300 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_dir2_grow_inode+0x6e/0x150 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_dir2_sf_to_block+0x149/0x870 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_dir_swap_prep+0xe2/0x110 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_dir_swap+0xfb/0x2f0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_dir_rebuild_tree+0x99/0x100 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_directory+0x83/0x1c0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xrep_attempt+0x4f/0x1e0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_scrub_metadata+0x393/0x5b0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_ioc_scrubv_metadata+0x306/0x570 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
xfs_file_ioctl+0xa4f/0x1150 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x7a/0x3b0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
This is a consequence of commit 0fe77e57588b98, which added the
following assertion to xfs_da_grow_inode_int:
ASSERT(args->total >= dp->i_nblocks - nblks);
Tracing this back to xrep_dir_swap_prep, I noticed that the xfs_da_args
object that's passed to xfs_dir2_sf_to_block sets args->total to 1.
This is incorrect because mkfs set the directory block size to 8k and
the filesystem block size to 4k. In other words, args->total should be
2 here, not 1.
Dave Chinner tripped over the same problem with the same branch through
a different channel -- his test setup set the fs block size to 1k, in
which case the directory block size is still set to 4k. Here,
args->total should be 4.
Changing the assignment of args->total to sc->mp->m_dir_geo->fsbcount
makes the assertion go away, but that isn't a complete fix. In
xrep_tempexch_estimate, we also incorrectly assume that a shortform
conversion requires 1 fsblock when it should be m_dir_geo->fsbcount.
Without that, we can under-reserve space in the transaction and cause a
filesystem shutdown.
Note that the xfs_dabuf_nfsb helper will compute the correct value for
directories and xattr, so we use that instead of open-coding the logic.
Also fix xrep_xattr_swap_prep to assign args->total via xfs_dabuf_nfsb
to avoid one logic bomb if we ever support multi-fsblock attrs.
Tripped-by: 0fe77e57588b98 ("xfs: assert the reservation covers each da fork growth") |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix dev use-after-free in xfrm async resumption
xfrm async resumption hold skb->dev refcnt until after transport_finish.
However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking
device reference, such as vti_rcv_cb. The subsequent async resumption
will decrement the tunnel device's reference count, which lead to uaf
of tunnel dev and refcnt leak of orig dev as below:
unregister_netdevice: waiting for vti1 to become free. Usage count = -2
Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set
by xfrm_rcv_cb can race with device teardown. Extend rcu protection over
xfrm_rcv_cb and transport_finish to prevent races. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix busy dentry warning on unmount after DIO
Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed
the issue in cifs where deferred close of a file led to a dentry reference
count not being released in umount, by flushing deferredclose_wq in
cifs_kill_sb() to solve it.
However, the cifs DIO path suffers from the same busy-dentry problem caused
by a delayed dentry reference-count release:
[dio] [cifsd] [close + umount]
netfs_unbuffered_write_iter_locked
...
cifs_demultiplex_thread
netfs_unbuffered_write
cifs_issue_write
netfs_wait_for_in_progress_stream [1]
...
netfs_write_subrequest_terminated
netfs_subreq_clear_in_progress
netfs_wake_collector // wake [1]
netfs_put_subrequest
netfs_put_request
queue_work(system_dfl_wq, xxx) [2]
// dio write return cifs_close
_cifsFileInfo_put
// cfile->count 2->1
--cfile->count [3]
// umount
cifs_kill_sb
kill_anon_super
// warning triggered!
shrink_dcache_for_umount [4]
[system_dfl_wq] [5]
netfs_free_request
...
_cifsFileInfo_put
// cfile->count 1->0
--cfile->count
queue_work(fileinfo_put_wq, xxx)
[fileinfo_put_wq] [6]
cifsFileInfo_put_work
cifsFileInfo_put_final
dput
If the umount path is triggered before [5], it results warning:
BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1)
[unmount of cifs cifs]
The existing per-inode ictx->io_count wait in cifs_evict_inode() does not
help: it lives in the inode eviction path, which runs after
shrink_dcache_for_umount() has already warned about the busy dentries.
Fix it by adding a per-superblock outstanding-rreq counter that is
incremented in cifs_init_request() and decremented in cifs_free_request().
In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach
0 - which guarantees that all cleanup_work for this sb have run and thus
all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq.
Then drain the workqueue so the dentry refs are dropped.
This is a targeted wait, not a flush of the system-wide system_dfl_wq. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use the DMA API for resource backing on Xen
On a Xen PV domain page addresses bear no relation to the real machine
addresses the host would have to use to reach it.
virtio_ring.c handles this correctly, vring_use_map_api() returns true
for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM.
virtio-gpu makes the same decision independently, but its copy
looks only at the feature bit:
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
QEMU does not set iommu_platform on virtio-vga by default, so
VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and
virtio_gpu_object_shmem_init() describes the framebuffer's backing pages
to the host with sg_phys(). Those are guest-physical addresses. In a PV
domain they resolve, on the host side, to pages belonging to some other
domain, so the host scans out unrelated memory.
Move the decision into virtio_gpu_use_dma_api() and give it the
xen_domain() check, like vring_use_map_api() has. This
additionally enables the dma_sync_sgtable_for_device() calls in
virtgpu_vq.c, which are required for correctness whenever swiotlb
is in play.
Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with
virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0
works fine and doesn't need this fix because it is identity-mapped,
only PV dom0s are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: fix -EIO cleanup order in queue_rq
On -EIO, the RDMA queue_rq path reports a host path error and then
still cleans up the command and unmaps the SQE DMA. The path error
helper completes the request, so that is double cleanup and DMA unmap
after the request is already complete.
Unmap the SQE first, then report the host path error. Skip the outer
command cleanup on that path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix BPF_F_CPU validation for sparse CPU IDs
BPF_F_CPU stores the target CPU ID in the upper 32 bits of the map
operation flags. bpf_map_check_op_flags() currently compares that ID
with num_possible_cpus(), which is the number of possible CPUs rather
than a bound on CPU IDs.
On an arm64 QEMU guest with a CPU device-tree hole, the possible CPU
mask was 0,2-3. A userspace program using raw bpf() syscalls creates
a BPF_MAP_TYPE_PERCPU_ARRAY and performs update and lookup operations
for each CPU by setting BPF_F_CPU and the CPU ID in the flags.
With the old check, CPU 1 is incorrectly accepted while valid CPU 3 is
rejected with -ERANGE. The CPU 1 update then reaches the per-CPU map
access path and triggers:
Unable to handle kernel paging request at virtual address ...
pc : __pi_memcpy_generic+0x5c/0x22c
lr : bpf_percpu_array_update+0x2dc/0x2e8
Call trace:
__pi_memcpy_generic
bpf_map_update_value
map_update_elem
__sys_bpf
Check the CPU ID against nr_cpu_ids and cpu_possible() instead. This
rejects CPU IDs outside the valid range and CPUs absent from the
possible mask, while allowing valid sparse CPU IDs. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Don't read the U65 rounding mode as a storage mode
Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage
mode on U85 only. On U65 the same field holds the rounding mode, and the
command stream parser has read it as a storage mode since the driver was
added.
That went unnoticed while unknown values fell through the switch, but
now that they are rejected, every U65 command stream that asks for
natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits
it for average pooling, concatenation, split, unpack, strided slice, LUT
and argmax, which is 72 failures of the Teflon test suite on an i.MX93.
Truncating rounding (1) is misread as well: it picks the two-tile
address path and computes a bogus feature map size from tile bases the
command stream never set.
Read the field as a storage mode only on the hardware where it is one. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START
The SCTP_CMD_TIMER_START handler checks timer_pending() before calling
timer_reduce(). The timer can expire and detach between these operations,
causing timer_reduce() to rearm the timer without taking the association
reference required for the newly armed timer.
The timer callback later unconditionally drops its association reference,
which can leave the association reference count unbalanced and result in
use-after-free during association teardown.
Use the return value of timer_reduce() to determine whether the timer was
actually armed. Take the association reference only when timer_reduce()
successfully starts a new timer, closing the race between checking the
timer state and rearming it.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix use-after-free in vxlan_mdb_remote_src_del()
vxlan_mdb_is_valid_source(), which validates MDBE_ATTR_SOURCE and every
MDBE_ATTR_SRC_LIST member, accepts the all-zeros address.
A source list is only accepted on a (*, G) entry, whose source is the
all-zeros address, and for each member of the list an (S, G) entry is
derived from it by substituting the source. Entries are keyed by a plain
memcmp() of struct vxlan_mdb_entry_key, so if MDBE_ATTR_SOURCE is present
and holds the all-zeros address and the source list holds it as well, the
derived (S, G) key is byte-identical to the (*, G) key and resolves to the
same entry. Omitting MDBE_ATTR_SOURCE is not equivalent, as the key is
then left with a zero address family.
vxlan_mdb_remote_src_del() removes the forwarding entry of a source before
freeing the source entry:
vxlan_mdb_remote_src_fwd_del(vxlan, group, remote, &ent->addr);
vxlan_mdb_remote_src_entry_del(ent);
With the keys aliased, the first call deletes the remote of the entry that
owns 'ent' instead of a separate (S, G) entry, and frees 'ent'. The second
call then runs on the freed entry, and its hlist_del() reads ->pprev and
->next out of it and writes through them.
Adding the (*, G) entry with NLM_F_REPLACE and no source list marks the
all-zeros source for deletion and reaches this from the sweep at the end
of vxlan_mdb_remote_srcs_replace().
BUG: KASAN: slab-use-after-free in __vxlan_mdb_add+0x1cd/0xd70
Read of size 8 at addr ffff888102852500 by task poc/84
__vxlan_mdb_add+0x1cd/0xd70
vxlan_mdb_add+0xc0/0x140
rtnl_mdb_add+0x157/0x2a0
rtnetlink_rcv_msg+0x207/0x5a0
Allocated by task 84:
__kmalloc_cache_noprof+0x153/0x360
vxlan_mdb_remote_srcs_add+0x2eb/0x440
__vxlan_mdb_add+0x803/0xd70
Freed by task 84:
kfree+0x14c/0x3b0
vxlan_mdb_remote_del+0x129/0x1a0
__vxlan_mdb_del+0x4f/0xe0
vxlan_mdb_remote_src_fwd_del.isra.0+0x162/0x1b0
__vxlan_mdb_add+0x1c5/0xd70
The MDB operations are netns-scoped, so an unprivileged user can perform
them in a new user and network namespace.
Reject the all-zeros address in vxlan_mdb_is_valid_source(), which covers
both call sites. A (*, G) entry is expressed by omitting the source, so
nothing legitimate is refused.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF
snd_pcm_hw_params() and snd_pcm_hw_free() guard buffer reallocation
with an mmap_count check performed under the PCM stream lock, but the
lock is released long before the buffer is actually freed:
snd_pcm_sync_stop(), constraint refinement and do_free_pages() all
happen in between. snd_pcm_mmap_data(), on the other hand, takes no
lock at all: it validates against the old buffer's state and
dma_bytes, remaps its pages into the VMA, and only then increments
mmap_count.
A concurrent mmap() can therefore slip in between the check and the
free. remap_pfn_range() installs writable PTEs for the old buffer's
pages without taking page references, and the subsequent
do_free_pages() returns those pages to the page allocator while the
VMA still maps them. This leaves a stale, writable mapping of freed
pages: a page-level use-after-free that can be leveraged for local
privilege escalation.
Make snd_pcm_mmap_data() participate in the buffer-access scheme
introduced for hw_params/hw_free: acquire runtime->buffer_accessing
before validating and remapping, and release it afterwards. Buffer
reallocation already fails with -EBUSY while accessors are active,
and the mmap side now fails with -EBUSY while a reallocation is in
progress, so the validate/remap sequence and the check/free sequence
can no longer interleave.
A reproducer that turns this race into a stale writable mapping of
the freed DMA buffer pages is available on request. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: safely drain sessions during logoff
SMB3 multichannel allows requests for one session to run on multiple
connections. Wait for all channels bound to a session before freeing
shared session objects.
A deferred byte-range lock remains counted as a running request and only
wakes when its file closes. Wake blocked locks during the drain without
unpublishing or modifying their file objects. Synchronous CANCEL requests
must invoke their cancellation callback to wake pending operations, while
CHANGE_NOTIFY completion remains specific to the asynchronous path.
Serialize session teardown with channel registration and previous-session
cleanup, and use atomic work-state transitions so LOGOFF, CANCEL, and
connection teardown invoke cancellation callbacks only once. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix listener task lifetime on netdev events
The listener thread exits when its listening socket is shutdown. The
netdevice notifier shuts down the socket before calling kthread_stop(), so
the task_struct can be freed before kthread_stop() gets its reference.
Create the listener in a stopped state and hold an extra task_struct
reference until kthread_stop_put() completes. Also stop and release
listeners before freeing their interface records during TCP teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: acquire the fastpath locks in rds_conn_shutdown()
rds_conn_shutdown() quiesces the transmit and receive-refill paths by
waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and
then runs the transport shutdown and rds_conn_path_reset(). Sampling
the bits clear is not the same as owning them: the moment after the
wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or
rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run
concurrently with the teardown.
The sender does recheck the connection state after taking the lock,
but that recheck is a classic store-buffering pattern: teardown writes
the state and reads the bit while the sender writes the bit and reads
the state. acquire_in_xmit() is only an acquire operation, so on
weakly ordered architectures both sides can miss each other's write,
and the transmit path then runs while the transport zeroes its rings
(e.g. rds_ib_ring_init()) and rds_send_path_reset() rewrites the
transmit state under it.
Oracle UEK fixed the same class of crashes - a 14-year tail of
BUG_ON()s in rds_ib_sub_signaled(), unexpected op-codes and NULL
dereferences in rds_ib_send_cqe_handler() during failover testing -
by making the teardown path *acquire* the fastpath bit locks instead
of testing them ("rds: Make sure transmit path and connection
tear-down does not run concurrently"). Ownership of a single word is
decided by RMW atomicity, so no cross-variable ordering is needed.
Do the same here: take both locks before calling the transport
shutdown, hold them across rds_conn_path_reset(), and release them
explicitly with a wake-up afterwards. Both are released with
clear_bit_unlock(), so that the ring re-initialization done by the
transport shutdown and the transmit state rewritten by
rds_send_path_reset() are ordered before either bit is seen clear by
the next acquire_in_xmit() or acquire_refill().
The fastpath users of these bits - rds_send_xmit() and
rds_ib_recv_refill() - are trylock style and back off while teardown
owns the locks, so no new lock dependency is introduced for them.
rds_tcp_reset_callbacks() is different: since the previous patch it
acquires RDS_IN_XMIT as well, and it blocks doing so, so its wait now
spans the teardown instead of at most one send batch. That waiter
runs from rds_tcp_accept_one() on the single-threaded krdsd workqueue
and holds rds_tcp_accept_lock and t_conn_path_lock while it waits, so
a duelling SYN accepted while its path is being torn down parks
accept processing for the duration of the teardown - for TCP bounded
by the (up to 5 s) drain loop in rds_tcp_conn_path_shutdown(). An IB
path's drain in rds_ib_conn_path_shutdown() has no round cap, but no
blocking waiter either: rds_tcp_reset_callbacks() is the only blocking
acquirer of these bits and waits only on its own TCP path, and the
fastpaths are trylock-and-back-off on both transports, so a long IB
drain lengthens only that path's own quiesce. The
window is narrow: the accept-side state check has to pass before the
teardown moves the path to RDS_CONN_DISCONNECTING.
Because krdsd is a single global workqueue, everything else queued
there - accept processing for other connections and network
namespaces, and the flush_workqueue(rds_wq) in rds_tcp_listen_stop()
during namespace teardown - waits behind the parked accept worker for
that time. It cannot deadlock, although the waits do point at each
other: the teardown blocks until the bit's holder releases it, and
the holder may be that krdsd accept worker. The holder finishes
without needing anything the teardown owns: the sync cancels
rds_tcp_reset_callbacks() issues target cp_send_w and cp_recv_w on
the path's ordered cp_wq, whose only execution slot is occupied by
the blocked cp_down_w itself, so they are pending at most and cancel
without flushing - a reliance on cp_wq being ordered that is now
noted next to those cancels (on
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context
Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP
garbage-collection workqueue, rather than the NAPI poll context. For any
unmatched PTP entries carrying an SKB, it calls
mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For
ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end
of that function is the following:
skb->protocol = eth_type_trans(skb, skb->dev);
napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb);
The napi pointer is one that was placed in the SKB control block when the
trapped packet was received in the NAPI context. Later, when the GC reaps
the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to
napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe
if the poll is running concurrently on another CPU.
In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent
softirq processing, but this only applies to the local CPU. Additionally,
its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish()
invokes netif_receive_skb(). This has not been accurate since the
referenced commit; this patch makes that comment accurate again.
mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX
net_device without any conditions. The NAPI instance's poll, which may be
running concurrent to the GC, is running as an independently-scheduled
kthread which may be on a different CPU. The call to local_bh_disable()
does not guard against this.
If a tx-timestamp timeout produces an unmatched entry (which can be easily
reproduced by running ptp4l and waiting for a port to reach the
UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of
a poll on another CPU, both sides mutate the GRO list concurrently, as
shown below:
[39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE
list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy)
Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018
RIP: 0010:__list_add_valid_or_report+0x79/0xb0
RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246
RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540
RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003
R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0
Call Trace:
<TASK>
gro_receive_skb+0xee/0x230
mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum]
mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core]
mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci]
__napi_poll+0x31/0x1e0
napi_threaded_poll_loop+0x16b/0x1c0
napi_threaded_poll+0x71/0xa0
kthread+0xfb/0x260
ret_from_fork+0x22d/0x260
ret_from_fork_asm+0x1a/0x30
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
The machinery that leads to this kernel panic has not been changed between
6.18.48 and mainline.
This patch adds an ingress-delivery helper for the PTP packet_finish()
path that calls netif_receive_skb() instead of napi_gro_receive().
netif_receive_skb(), unlike napi_gro_receive(), can be called from outside
of the NAPI instance's poll context, which can occur at the call site for
this path. RX stats accounting and the skb->dev assignment are still
preserved; the only change is the delivery call itself.
This removes GR
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
eth: nfp: bound the ntuple rule dump by the caller's buffer size
nfp_net_get_fs_loc() dumps every entry of nn->fs.list into rule_locs[]
without consulting cmd->rule_cnt, which is how many entries the caller
had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the
ioctl sizes the buffer from the rule_cnt userspace passes in, so once an
admin has installed flow steering rules any user can ask for fewer slots
than there are rules and run off the end of the allocation. A rule_cnt
of 0 leaves the buffer pointer NULL and the walk dereferences it.
Bail out with -EMSGSIZE when the buffer fills up, the way the other
ntuple capable drivers do, and report how many locations were filled so
a shrinking rule list does not leave the caller reading stale slots. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: reject dynamic fdb entries that reference a nexthop id
The commit cited in the Fixes tag allowed VXLAN FDB entries to point to
FDB nexthops so that overlay traffic could be load balanced across
multiple VTEPs. Such entries can only be configured from user space,
cannot be learned and cannot roam. They only make sense with a user space
control plane such as E-VPN where data plane learning is disabled.
Despite that, the VXLAN driver does not currently prevent such entries
from being configured with the "dynamic" flag. The per-nexthop FDB list
is only protected by the per-device hash lock, which is not sufficient
when two VXLAN devices point to the same FDB nexthop and therefore share
the list. Aging runs in softirq context without RTNL, so an entry deleted
by one device can race with an addition or deletion from the other,
leading to list corruption:
list_del corruption. next->prev should be ffff8881069d9548, but was
dead000000000122. (next=ffff8881069d9448)
WARNING: CPU: 0 PID: 90 at lib/list_debug.c:65
__list_del_entry_valid_or_report+0x1aa/0x210
...
vxlan_fdb_destroy+0x5b8/0xad0
vxlan_cleanup+0x328/0x450
call_timer_fn+0x2a/0x1c0
run_timer_softirq+0x18c/0x210
BUG: KASAN: slab-use-after-free in vxlan_fdb_destroy
Fix this by rejecting the bogus configuration of dynamic FDB entries that
point to FDB nexthops, both when created and when an existing entry is
updated. As such, the per-nexthop FDB list is only ever mutated under the
RTNL lock. Add test cases to make sure that this does not regress in the
future. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: defer qdisc freeing after failed creation
An RTM_NEWQDISC request can make clsact bind a populated shared ingress
block during ->init(), publishing an embedded mini_Qdisc to lockless
readers. If the same request has an invalid TCA_RATE, estimator setup
fails after ->init(); the unwind removes the pointer but synchronously
frees its containing qdisc while tc_run() may still hold it.
Retire failed qdiscs through the same RCU helper as normal destruction.
Inline the synchronous free into the callback now that no direct callers
remain. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_blk: reject out-of-range sector starts
vdpasim_blk_check_range() logs an invalid start sector but continues
validating the request. The subsequent unsigned capacity subtraction can
underflow and let an out-of-range buffer offset reach the data path.
The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT
copies guest data to blk->buffer + offset through
vringh_iov_pull_iotlb(), causing an out-of-bounds write in
_copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from
blk->buffer + offset to the guest through vringh_iov_push_iotlb(),
causing an out-of-bounds read in _copy_to_iter().
VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(),
causing an out-of-bounds write.
Reject starts at or beyond the capacity before the subtraction. Treat the
capacity boundary as invalid because the IN and OUT paths round byte counts
down to sectors for validation but later copy the original byte counts. A
sub-sector request at the capacity boundary would otherwise still access
past the end of the buffer.
I found this bug myself, though the patch was written with AI assistance. |
