| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Skip unsettled links in link iterator
bpf_link_prime() inserts a link into link_idr before anon_inode_getfile()
succeeds and before bpf_link_settle() publishes the ID in link->id.
bpf_link_by_id() treats such an ID-zero link as unsettled, but the link
iterator takes a reference without this check.
If anon_inode_getfile() then fails, the creator removes the ID and frees
its still-private link directly. The iterator is left with a dangling
reference and its next bpf_link_put() accesses freed memory.
Treat ID-zero entries as transient in bpf_link_get_curr_or_next(), just as
bpf_link_by_id() does.
BUG: KASAN: slab-use-after-free in bpf_link_put
Write of size 8 by task exp/384
Call Trace:
bpf_link_put kernel/bpf/syscall.c:3372
bpf_link_seq_next kernel/bpf/link_iter.c:33
bpf_seq_read kernel/bpf/bpf_iter.c:158
vfs_read fs/read_write.c:572
ksys_read fs/read_write.c:716
do_syscall_64 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:121
Kernel panic - not syncing: KASAN: panic_on_warn set ... |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_rpfilter: reject routes without inet6_dev
ip6_route_lookup() can return an error-free route whose rt6i_idev is
NULL. Lowering an external nexthop device's MTU below IPV6_MIN_MTU tears
down its inet6_dev while fib6_ifdown() leaves routes using nexthop objects
in the FIB. An unprivileged user can construct this state with rtnetlink
in a private user and network namespace, then trigger a NULL dereference
through an IPv6 rpfilter lookup:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: rpfilter_mt (net/ipv6/netfilter/ip6t_rpfilter.c:75)
Call Trace:
ip6t_do_table (net/ipv6/netfilter/ip6_tables.c:316)
nf_hook_slow (net/netfilter/core.c:619)
ipv6_rcv (net/ipv6/ip6_input.c:351)
__netif_receive_skb_one_core (net/core/dev.c:6216)
process_backlog (net/core/dev.c:6680)
__napi_poll (net/core/dev.c:7739)
net_rx_action (net/core/dev.c:7959)
handle_softirqs (kernel/softirq.c:622)
do_softirq.part.0 (kernel/softirq.c:523)
__local_bh_enable_ip (kernel/softirq.c:450)
__dev_queue_xmit (net/core/dev.c:4913)
packet_sendmsg (net/packet/af_packet.c:3139)
__sys_sendto (net/socket.c:2252)
__x64_sys_sendto (net/socket.c:2259)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception in interrupt
Reject routes without an inet6_dev immediately after lookup. Such routes
are not eligible for reverse-path filtering, and the check protects all
later rt6i_idev dereferences. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix out-of-bounds read of sk_protocol in bpf_sock_destroy()
sk_protocol lives in struct sock, not in struct sock_common. A timewait
or request sock handed to bpf_sock_destroy() by the tcp iterator is
neither, so reading sk->sk_protocol runs past the object:
==================================================================
BUG: KASAN: slab-out-of-bounds in bpf_sock_destroy+0xc7/0xe0
Read of size 2 at addr ffff8881047d11b4 by task test_progs/428
Tainted: [W]=WARN
Call Trace:
<TASK>
dump_stack_lvl+0x91/0xf0
print_report+0xd1/0x630
kasan_report+0xf3/0x130
__asan_report_load2_noabort+0x14/0x30
bpf_sock_destroy+0xc7/0xe0
bpf_prog_c3dd61f9d9cd9f37_iter_tcp6_timewait+0x9f/0xb7
bpf_iter_run_prog+0x538/0xde0
bpf_iter_tcp_seq_show+0x26b/0x4b0
bpf_seq_read+0x424/0x1210
vfs_read+0x197/0xe40
ksys_read+0x119/0x240
__x64_sys_read+0x72/0xc0
x64_sys_call+0x647/0x27e0
do_syscall_64+0xe5/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Only check sk_protocol on full socks. tcp_abort() already knows how to
deal with TIME_WAIT and NEW_SYN_RECV socks. Also fix the comment, it
never matched the code. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Use array_map_meta_equal for percpu array inner map replacement
percpu_array_map_ops.map_meta_equal points to the generic
bpf_map_meta_equal(), which does not compare max_entries. When a
percpu array serves as an inner map, replacing it with one that has
fewer max_entries bypasses the check. Since percpu_array_map_gen_lookup()
inlines the original template's index_mask as a JIT immediate, a lookup
on the replacement map can access pptrs[] out of bounds.
Point percpu_array_map_ops.map_meta_equal to array_map_meta_equal(),
which already enforces the max_entries equality check.
Add a selftest to verify that replacing a percpu array inner map with
a differently-sized one is rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: require the MAC header to be present in __vlan_insert_inner_tag()
__vlan_insert_inner_tag() only guarantees head room via skb_cow_head(),
never that mac_len bytes of MAC header are present. Its ETH_HLEN
wrappers - __vlan_insert_tag() under skb_vlan_push(), and
vlan_insert_tag() under validate_xmit_vlan() on the generic transmit
path - therefore rewrite the first 16 bytes at skb->data: a 12-byte
memmove plus two 2-byte stores at +12 and +14. No caller supplies the
bound, while the pop helpers use skb_ensure_writable()/pskb_may_pull().
An IFF_TUN device has hard_header_len == 0, so packet_snd() accepts a
one-byte AF_PACKET/SOCK_RAW frame. The first vlan push only sets a
hwaccel tag; the next - clsact "action vlan push" or
bpf_skb_vlan_push() - enters the helper with skb->len still 1. The
head comes from skbuff_small_head without __GFP_ZERO, so each push
drags bytes from beyond skb->tail into the frame. After three the
one-byte send leaves as 13 bytes carrying 11 bytes of uninitialised
slab:
0000: 5a b3 62 12 80 88 ff ff 00 b3 62 12 81
`------------------------------'
only 0x5a was sent; the rest is slab, here the top 56 bits of a
linear-map address
Require the MAC header the helper rewrites to be present, so such a
frame is dropped rather than transmitted. |
| A flaw was found in sequoia-openpgp. The library incorrectly infers key flags for older certificates when a key flags subpacket is missing, leading to a discrepancy in how key capabilities are viewed. This key flag confusion allows an attacker to bypass the back-signature check. Consequently, an attacker can illegitimately bind an arbitrary subkey to their own certificate and forge signatures, completely compromising cryptographic integrity. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: reject IDR error pointers when deleting actions
tcf_action_delete() drops the reference held by its lookup before calling
tcf_idr_delete_index() with the saved action index. An unlocked
classifier can remove that action and reserve the same IDR slot with
ERR_PTR(-EBUSY) in between.
tcf_idr_delete_index() only checks the lookup result for NULL. It
therefore treats the reservation as a tc_action and dereferences
tcfa_bindcnt. A hardware execution breakpoint was used to schedule the
interleaving without changing the kernel source. KASAN reported this
decoded trace:
BUG: KASAN: null-ptr-deref in tca_action_gd+0x5b9/0x1010
Read of size 4 at addr 0000000000000010 by task poc/150
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002
RIP: tca_action_gd+0x5c0/0x1010:
arch_atomic_read at arch/x86/include/asm/atomic.h:23
raw_atomic_read at include/linux/atomic/atomic-arch-fallback.h:457
atomic_read at include/linux/atomic/atomic-instrumented.h:33
tcf_idr_delete_index at net/sched/act_api.c:766
tcf_action_delete at net/sched/act_api.c:1859
tcf_del_notify at net/sched/act_api.c:2014
tca_action_gd at net/sched/act_api.c:2064
R13: 0000000000000010 R15: fffffffffffffff0
Kernel panic - not syncing: Fatal exception
R15 contains ERR_PTR(-EBUSY), and adding the tcfa_bindcnt offset produces
the address in R13. With the guard applied, the same reproducer returned
-ENOENT without a KASAN report or panic. Treat error pointers as absent
and return -ENOENT. |
| In the Linux kernel, the following vulnerability has been resolved:
veth: manage XDP program pointers during channel resize
veth_set_channels() tears down XDP resources for removed RX queues
without clearing rq->xdp_prog. If the program is then detached or
replaced, those queues keep the old pointer after bpf_prog_put().
A later channel increase can re-enable NAPI and run the freed program.
BUG: unable to handle page fault for address: ffffc90000256048
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: veth_xdp_rcv_skb (include/linux/filter.h:779
include/net/xdp.h:696 drivers/net/veth.c:820)
Call Trace:
veth_xdp_rcv (drivers/net/veth.c:941)
veth_poll (drivers/net/veth.c:986)
__napi_poll (net/core/dev.c:7787)
net_rx_action (net/core/dev.c:7850 net/core/dev.c:8007)
handle_softirqs (kernel/softirq.c:645)
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL
An LWT_SEG6LOCAL program can invalidate its cached SRH with
bpf_lwt_seg6_adjust_srh() and then call bpf_skb_pull_data(). The latter
may reallocate skb->head, leaving the per-CPU SRH pointer dangling.
Post-program SRH validation then writes through that pointer.
Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL programs so the verifier
rejects this unsafe helper combination. Other LWT program types continue
to expose the helper through lwt_out_func_proto(). |
| The Kirki WordPress plugin before 6.3.2 does not prevent shortcodes held in comments from being executed when it renders them, and displays comments regardless of their moderation status, allowing unauthenticated visitors to run shortcodes registered on the site and to read private custom fields of the page being viewed. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains a Missing Authorization vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Improper Restriction of Excessive Authentication Attempts vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges, Protection mechanism bypass, and Unauthorized access. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Use of Less Trusted Source vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information tampering. |
| In Progress® Telerik® Report Server prior to version 12.2.26.1007, incorrect privilege assignment in the service-agent SignalR hub allows an authenticated user, including a low-privilege or guest account with a valid bearer token, to register as a trusted service agent. On the next server settings-synchronization event, the rogue agent receives storage settings and encryption private keys. This privilege escalation enables disclosure of protected secrets, including stored data-source credentials and connection strings, and allows agent impersonation and interference with task dispatch. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Crocoblock JetBlocks For Elementor jet-blocks allows Stored XSS.This issue affects JetBlocks For Elementor: from n/a through 1.5.2.1. |
| A path traversal vulnerability was found in gvproxy, the network forwarder provided by the gvisor-tap-vsock package. The unauthenticated /services/forwarder/expose endpoint does not validate the caller-supplied socket path, allowing an attacker to delete arbitrary files on the host system. |
| Backdrop CMS 1.34 before 1.34.5 and 1.35 before 1.35.1 doesn't sufficiently protect configuration exports when delivering a compressed archive. This vulnerability is mitigated by the fact that an export must have been previously requested by someone with the "Synchronize, import, and export configuration" permission. NOTE: CVE-2026-107914 refers to the vulnerability in which config.admin.inc does not ensure that a file_unmanaged_delete operation occurs. Therefore, many archives could persist: config.tar.gz, config_0.tar.gz, config_1.tar.gz, etc. There is a separate config.module issue that could allow remote access by an anonymous user, but only for the one filename config.tar.gz. |
| In Progress® Telerik® Report Server prior to version 12.2.26.1007, a stored cross-site scripting vulnerability in the shared reporting engine allows an authenticated report author to embed javascript: or vbscript: URLs in report navigation actions or HTML text box links. When another user views the malicious report and the embedded navigation is triggered, attacker-controlled script can execute in the web report viewer's origin. In a multi-user Report Server deployment, this can enable privilege escalation by performing actions in a higher-privilege user's authenticated session, including an administrator's session. |
| The LE Audio Broadcast Sink in subsys/bluetooth/audio/bap_broadcast_sink.c copies subgroup metadata from a received Basic Audio Announcement (BASE) into the static Broadcast Audio Scan Service parameter structure mod_src_param without any bounds check. In base_subgroup_meta_cb() the destination element was selected as mod_src_param.subgroups[mod_src_param.num_subgroups] with no test against ARRAY_SIZE(mod_src_param.subgroups) (sized by CONFIG_BT_BAP_BASS_MAX_SUBGROUPS, default 1), and the metadata was copied with memcpy() using the raw on-air length returned by bt_bap_base_get_subgroup_codec_meta() into a metadata array sized by CONFIG_BT_AUDIO_CODEC_CFG_MAX_METADATA_SIZE (default 4). The BASE validator bt_bap_base_get_base_from_ad() only checks structural consistency and permits up to ~24 subgroups and metadata LTVs of ~240 octets.
The defect is reached from the periodic advertising receive callback: pa_recv() → bt_data_parse() → pa_decode_base() → update_recv_state_base() → bt_bap_base_foreach_subgroup() → base_subgroup_meta_cb(). Every broadcast sink registers a scan-delegator receive state at creation (bt_bap_broadcast_sink_create() calls broadcast_sink_add_src()), and CONFIG_BT_BAP_BROADCAST_SINK depends on CONFIG_BT_BAP_SCAN_DELEGATOR, so the path is active in every broadcast-sink build once the device is periodic-advertising-synced. An attacker in radio range who operates a broadcast source the device syncs to — or who impersonates the advertiser address and SID of one already in use, periodic advertising data being unauthenticated — can change the BASE at will; each new BASE is re-parsed.
A crafted BASE therefore writes attacker-chosen bytes past the end of a fixed static object in .bss: up to roughly 236 bytes for an oversized metadata LTV, plus whole struct bt_bap_bass_subgroup records for each subgroup beyond CONFIG_BT_BAP_BASS_MAX_SUBGROUPS. This is memory corruption of adjacent Bluetooth-audio state reachable with no pairing, bonding or GATT connection, with a potential for remote code execution in the Bluetooth RX thread; in addition, the unvalidated metadata_len is forwarded to bt_bap_scan_delegator_mod_src(), which neither clamps it nor rejects it, leading to a further copy into the receive state and to out-of-bounds memory being disclosed in the BASS receive-state notification sent to a connected Broadcast Assistant.
The fix rejects a BASE carrying more subgroups than the receive state can hold (discarding the update entirely) and omits metadata that does not fit rather than copying it, and additionally honours the previously-ignored error return of the subgroup decode pass. |
| The ITE IT8xxx2 SHI host-command backend (subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c) copied the 8-byte host-command request header from the SPI Rx FIFO directly into the shared receive buffer data->in_msg and only afterwards checked the protocol version and the derived packet length. The interrupt handler also accepted a chip-select assertion and an Rx-valid-length (RVLI) interrupt in any driver state other than SHI_STATE_DISABLED, so a new header could be parsed while the host-command thread was still processing the previous request out of the very same buffer.
The host processor is the SPI controller and drives both chip select and the clock. After sending a well-formed request it can immediately de-assert chip select — which returns the driver to the ready state and re-enables the FIFO — and start a second transaction carrying a header with data_len = 0xFFFF. Those eight bytes are written into in_msg before the oversized length is rejected, so they land in a buffer whose contents verify_rx() in subsys/mgmt/ec_host_cmd/ec_host_cmd_handler.c has already validated. If this lands in the window before the host-command thread executes args.input_buf_size = rx_header->data_len, the framework hands the registered command handler a 65535-byte input length over a 256-byte buffer.
The result is an out-of-bounds read of up to roughly 64 KiB beyond the request buffer: command handlers that copy or echo input_buf_size bytes disclose adjacent embedded-controller memory back to the host or overflow the response buffer, and a read past the end of SRAM faults the controller. The same race also allows cmd_id and cmd_ver to be swapped after checksum verification and after handler lookup. Exploitation requires the ability to drive the inter-processor SHI bus (a compromised host OS or physical access to the SPI lines) and winning a timing race, which the SPI controller can retry indefinitely.
The fix parses the header into a local struct ec_host_cmd_request_header and copies it into in_msg only after the length has been bounded by sizeof(data->in_msg), and ignores chip-select and RVLI interrupts outside SHI_STATE_READY_TO_RECV/SHI_STATE_RECEIVING. A residual, bounded race remains: an end-of-transaction interrupt still resets the state to ready while the host-command thread owns the buffer, so a valid second request can still overwrite the in-flight request's contents, unlike the NPCX backend which parks in SHI_STATE_CNL_RESP_NOT_RDY while the buffer is in use. |
