| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') vulnerability in ithewei libhv allows HTTP Response Smuggling.This issue affects libhv: through 1.3.3. |
| Inconsistent interpretation of HTTP requests ('HTTP Request/Response Smuggling') issue exists in HAProxy. If this vulnerability is exploited, a remote attacker may access a path that is restricted by ACL (Access Control List) set on the product. As a result, the attacker may obtain sensitive information. |
| NVIDIA Jetson Linux and IGX OS image contains a vulnerability in the UEFI firmware RCM boot mode, where an unprivileged attacker with physical access to the device could load untrusted code. A successful exploit might lead to code execution, escalation of privileges, data tampering, denial of service, and information disclosure. The scope of the impacts can extend to other components. |
| A vulnerability was found in the resteasy-netty4 library arising from improper handling of HTTP requests using smuggling techniques. When an HTTP smuggling request with an ASCII control character is sent, it causes the Netty HttpObjectDecoder to transition into a BAD_MESSAGE state. As a result, any subsequent legitimate requests on the same connection are ignored, leading to client timeouts, which may impact systems using load balancers and expose them to risk. |
| Backstage is an open framework for building developer portals. Configuration supplied through APP_CONFIG_* environment variables, for example APP_CONFIG_backend_listen_port=7007, where unexpectedly ignoring the visibility defined in configuration schema. This occurred even if the configuration schema specified that they should have backend or secret visibility. This was an intended feature of the APP_CONFIG_* way of supplying configuration, but now clearly goes against the expected behavior of the configuration system. This behavior leads to a risk of potentially exposing sensitive configuration details intended to remain private or restricted to backend processes. The issue has been resolved in version 0.3.75 of the @backstage/plugin-app-backend package. As a temporary measure, avoid supplying secrets using the APP_CONFIG_ configuration pattern. Consider alternative methods for setting secrets, such as the environment substitution available for Backstage configuration. |
| React Router is a multi-strategy router for React bridging the gap from React 18 to React 19. There is a vulnerability in Remix/React Router that affects all Remix 2 and React Router 7 consumers using the Express adapter. Basically, this vulnerability allows anyone to spoof the URL used in an incoming Request by putting a URL pathname in the port section of a URL that is part of a Host or X-Forwarded-Host header sent to a Remix/React Router request handler. This issue has been patched and released in Remix 2.16.3 and React Router 7.4.1. |
| Connection desynchronization between an HTTP proxy and the model backend. The fixes were rolled out for all proxies in front of impacted models by 2025-09-28. Users do not need to take any action. |
| Erlang/OTP is a set of libraries for the Erlang programming language. In versions prior to OTP-27.3.4 (for OTP-27), OTP-26.2.5.12 (for OTP-26), and OTP-25.3.2.21 (for OTP-25), Erlang/OTP SSH fails to enforce strict KEX handshake hardening measures by allowing optional messages to be exchanged. This allows a Man-in-the-Middle attacker to inject these messages in a connection during the handshake. This issue has been patched in versions OTP-27.3.4 (for OTP-27), OTP-26.2.5.12 (for OTP-26), and OTP-25.3.2.21 (for OTP-25). |
| code-server runs VS Code on any machine anywhere through browser access. Prior to version 4.99.4, a maliciously crafted URL using the proxy subpath can result in the attacker gaining access to the session token. Failure to properly validate the port for a proxy request can result in proxying to an arbitrary domain. The malicious URL `https://<code-server>/proxy/test@evil.com/path` would be proxied to `test@evil.com/path` where the attacker could exfiltrate a user's session token. Any user who runs code-server with the built-in proxy enabled and clicks on maliciously crafted links that go to their code-server instances with reference to /proxy. Normally this is used to proxy local ports, however the URL can reference the attacker's domain instead, and the connection is then proxied to that domain, which will include sending cookies. With access to the session cookie, the attacker can then log into code-server and have full access to the machine hosting code-server as the user running code-server. This issue has been patched in version 4.99.4. |
| A vulnerability classified as critical was found in mhuertos phpLDAPadmin up to 665dbc2690ebeb5392d38f1fece0a654225a0b38. Affected by this vulnerability is the function makeHttpRequest of the file htdocs/js/ajax_functions.js. The manipulation leads to http request smuggling. The attack can be launched remotely. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The patch is named dd6e9583a2eb2ca085583765e8a63df5904cb036. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-270523. |
| Unintended proxy or intermediary ('Confused Deputy') issue exists in HMI ViewJet C-more series and HMI GC-A2 series, which may allow a remote unauthenticated attacker to use the product as an intermediary for FTP bounce attack. |
| An unintended proxy or intermediary in the AMD power management firmware (PMFW) could allow a privileged attacker to send malformed messages to the system management unit (SMU) potentially resulting in arbitrary code execution. |
| The “ipaddress” module contained incorrect information about whether certain IPv4 and IPv6 addresses were designated as “globally reachable” or “private”. This affected the is_private and is_global properties of the ipaddress.IPv4Address, ipaddress.IPv4Network, ipaddress.IPv6Address, and ipaddress.IPv6Network classes, where values wouldn’t be returned in accordance with the latest information from the IANA Special-Purpose Address Registries.
CPython 3.12.4 and 3.13.0a6 contain updated information from these registries and thus have the intended behavior. |
| Improper Inconsistent Interpretation of
HTTP Requests ('HTTP Request Smuggling') in Delinea Inc. Cloud Suite and
Privileged Access Service.
If you're not using the latest Server Suite agents, this fix requires that you upgrade to Server Suite 2023.1 (agent 6.0.1) or later. * If you cannot upgrade to Release 2023.1 (agent version 6.0.1) or later, you can choose one of the following versions:
* Server Suite release 2023.0.5 (agent version 6.0.0-158)
* Server Suite release 2022.1.10 (agent version 5.9.1-337) |
| A vulnerability has been identified in APOGEE PXC+TALON TC Series (BACnet) (All versions). Affected devices start sending unsolicited BACnet broadcast messages after processing a specific BACnet createObject request. This could allow an attacker residing in the same BACnet network to send a specially crafted message that results in a partial denial of service condition of the targeted device, and potentially reduce the availability of BACnet network. A power cycle is required to restore the device's normal operation. |
| Varnish Cache before 7.6.3 and 7.7 before 7.7.1, and Varnish Enterprise before 6.0.13r14, allow client-side desync via HTTP/1 requests, because the product incorrectly permits CRLF to be skipped to delimit chunk boundaries. |
| HTTP request desynchronization in Ping Identity PingAccess, all versions prior to 8.0.1 affected allows an attacker to send specially crafted http header requests to create a request smuggling condition for proxied requests. |
| Gunicorn fails to properly validate Transfer-Encoding headers, leading to HTTP Request Smuggling (HRS) vulnerabilities. By crafting requests with conflicting Transfer-Encoding headers, attackers can bypass security restrictions and access restricted endpoints. This issue is due to Gunicorn's handling of Transfer-Encoding headers, where it incorrectly processes requests with multiple, conflicting Transfer-Encoding headers, treating them as chunked regardless of the final encoding specified. This vulnerability allows for a range of attacks including cache poisoning, session manipulation, and data exposure. |
| The team has identified a critical vulnerability in the http server of the most recent version of Node, where malformed headers can lead to HTTP request smuggling. Specifically, if a space is placed before a content-length header, it is not interpreted correctly, enabling attackers to smuggle in a second request within the body of the first. |
| Apollo Router is a configurable, graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. The affected versions of Apollo Router contain a bug that in limited circumstances, could lead to unexpected operations being executed which can result in unintended data or effects. This only affects Router instances configured to use distributed query plan caching. The root cause of this defect is a bug in Apollo Router’s cache retrieval logic: When this defect is present and distributed query planning caching is enabled, asking the Router to execute an operation (whether it is a query, a mutation, or a subscription) may result in an unexpected variation of that operation being executed or the generation of unexpected errors. The issue stems from inadvertently executing a modified version of a previously executed operation, whose query plan is stored in the underlying cache (specifically, Redis). Depending on the type of the operation, the result may vary. For a query, results may be fetched that don’t match what was requested (e.g., rather than running `fetchUsers(type: ENTERPRISE)` the Router may run `fetchUsers(type: TRIAL)`. For a mutation, this may result in incorrect mutations being sent to underlying subgraph servers (e.g., rather than sending `deleteUser(id: 10)` to a subgraph, the Router may run `deleteUser(id: 12)`. Users who are using distributed query plan caching, are advised to either upgrade to version 1.45.1 or above or downgrade to version 1.43.2 of the Apollo Router. Apollo Router versions 1.44.0 or 1.45.0 are not recommended for use and have been withdrawn. Users unable to upgrade can disable distributed query plan caching to mitigate this issue. |
