| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, x86: Fix trampoline stack size for 128-bit arguments
btf_distill_func_proto() accepts a function argument up to 16 bytes, so a
128-bit scalar such as __int128 reaches the x86 trampoline with
arg_size == 16. But the current implementation assumes an __int128
argument only needs one register, so the register save area is
under-allocated and save_args() overwrites adjacent stack slots.
Compute the register count from arg_size for all arguments to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix integer overflow in verify_tags() bounds check
verify_tags() validates the tagset table unpacked from a policy blob.
For each set it reads a count and checks that advancing the index by
that count stays inside sets.table[]:
u32 cnt = tags->sets.table[i];
if (i+cnt >= tags->sets.size) {
i, cnt and sets.size are all u32, so i+cnt is evaluated modulo 2^32.
sets.table[] is filled by unpack_tagsets() with aa_unpack_u32(), so
every entry is a raw unbounded 32-bit word taken from the policy blob,
and verify_tags() is the function that is supposed to validate it. A
count close to U32_MAX makes the sum wrap to a small value, the guard
passes, and the inner loop then walks sets.table[++i] past the end of
the kcalloc(size, sizeof(u32)) allocation.
Note that sets.size is bounded by 65535, because unpack_tagsets() reads
it with aa_unpack_array() as a u16, so the wrap cannot be reached by
growing the table; it is reached purely through the attacker-supplied
count.
With sets.size = 2 and sets.table = { 0, 0xffffffff }:
i = 0: cnt = 0, guard 0 + 0 >= 2 is false, inner loop does not run
i = 1: cnt = 0xffffffff, guard (1 + 0xffffffff) mod 2^32 == 0 >= 2 is
false, so the guard is bypassed and the inner loop reads
sets.table[2] -- one element past a two element allocation
The walk continues until an out-of-bounds value happens to be >=
hdrs.size or the access faults, so a crafted policy yields an
out-of-bounds read on the policy load path
(aa_replace_profiles -> aa_unpack -> unpack_policydb -> unpack_tags ->
verify_tags). unpack_tags() runs before the perms and DFA tables are
unpacked, so no other table needs to be well formed to reach it.
Policy load is gated by aa_may_manage_policy(), which checks
CAP_MAC_ADMIN relative to the subject's own user namespace rather than
the init user namespace, so with the default
unprivileged_userns_apparmor_policy=1 the path is reachable from an
unprivileged task in a matched-level nested namespace, not only by a
globally privileged one.
Perform the addition in u64 so that it cannot wrap, restoring the
intended i + cnt < sets.size guarantee. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MSFT: validate evt_prefix_len against the response length
read_supported_features() only checks that the response covers the fixed
part of struct msft_rp_read_supported_features, which is 11 bytes:
if (skb->len < sizeof(*rp)) {
bt_dev_err(hdev, "MSFT supported features length mismatch");
goto failed;
}
evt_prefix[] is a flexible array member and rp->evt_prefix_len is an
unvalidated u8 taken straight out of that response, so
msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len,
GFP_KERNEL);
copies up to 255 bytes from a reply that may have carried none of them.
What is copied is data the controller never sent, and it is then used to
match incoming vendor events in msft_vendor_evt().
This is not an out-of-bounds access. An skb data allocation always has
at least SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) bytes past the
payload, which is more than the 255 byte maximum, so the read stays
inside the allocation and KASAN does not report it. It is still a read
of bytes the host was never given, with the length fully controlled by
the controller.
Reject a response that is too short for the prefix it declares.
Verified with an emulated controller over /dev/vhci on a KASAN kernel,
with vhci made to advertise an MSFT opcode the way btintel, btqca, btmtk
and btrtl do unconditionally. A reply of exactly 11 bytes declaring
evt_prefix_len = 255 reaches kmemdup and copies 255 bytes
("skb->len=11 evt_prefix_len=255", with the copied buffer dumped); since
the reply ends at the fixed part, all 255 come from past the end of the
response. No KASAN report is produced, as expected from the allocation
slack described above. With this patch the response is rejected with
"MSFT event prefix length mismatch" and msft->evt_prefix is left unset. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate ipc response length before dereferencing its fields
ipc_validate_msg() computes the expected message size by reading length
fields out of the response buffer supplied by the userspace ksmbd daemon
(payload_sz, session_key_len, ngroups, ...). Those fields are read before
the buffer is verified to be large enough to contain the struct they belong
to, so a short response makes the read land past the end of the allocation.
handle_response() sizes entry->response purely from the netlink attribute
length (nla_len()) and only guards the leading handle read, so the daemon
can install a response as small as the kmalloc-8 object seen below. When
ipc_msg_send_request() then calls ipc_validate_msg() for a
KSMBD_EVENT_RPC_REQUEST, the cast to struct ksmbd_rpc_command reads
resp->payload_sz at offset 8 of an 8-byte allocation:
[ 3697.841381] ==================================================================
[ 3697.844099] BUG: KASAN: slab-out-of-bounds in ipc_msg_send_request+0x763/0x800
[ 3697.846604] Read of size 4 at addr ffff888105f95910 by task kworker/4:3/20682
[ 3697.849061]
[ 3697.849801] CPU: 4 UID: 0 PID: 20682 Comm: kworker/4:3 Not tainted 7.2.0-rc3-next-20260717-virtme #117 PREEMPT(lazy)
[ 3697.850077] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 3697.850303] Workqueue: ksmbd-io handle_ksmbd_work
[ 3697.850592] Call Trace:
[ 3697.850794] <TASK>
[ 3697.850952] __dump_stack+0x21/0x60
[ 3697.851239] dump_stack_lvl+0xc2/0x100
[ 3697.851528] print_address_description+0x77/0x200
[ 3697.851816] ? ipc_msg_send_request+0x763/0x800
[ 3697.852024] print_report+0x58/0x70
[ 3697.852316] kasan_report+0x117/0x150
[ 3697.852585] ? down_write+0x146/0x1f0
[ 3697.852809] ? ipc_msg_send_request+0x763/0x800
[ 3697.853082] ipc_msg_send_request+0x763/0x800
[ 3697.853385] ? __pfx_ipc_msg_send_request+0x10/0x10
[ 3697.853604] ? kasan_unpoison+0x48/0x70
[ 3697.853936] ? __pfx___up_read+0x10/0x10
[ 3697.854221] ksmbd_rpc_ioctl+0x380/0x520
[ 3697.854542] ? __pfx_ksmbd_rpc_ioctl+0x10/0x10
[ 3697.854757] ? kasan_unpoison+0x48/0x70
[ 3697.854962] ? copy_from_kernel_nofault+0x32c/0x4e0
[ 3697.855166] ? kasan_unpoison+0x48/0x70
[ 3697.855416] fsctl_pipe_transceive+0x139/0x7a0
[ 3697.855705] ? __pfx_copy_from_kernel_nofault+0x10/0x10
[ 3697.855937] ? __pfx_fsctl_pipe_transceive+0x10/0x10
[ 3697.856388] ? __sanitizer_cov_trace_switch+0x7b/0x140
[ 3697.856620] smb2_ioctl+0x1141/0x3420
[ 3697.856994] ? __pfx_smb2_ioctl+0x10/0x10
[ 3697.857182] ? get_smb2_cmd_val+0xe3/0x1c0
[ 3697.857655] handle_ksmbd_work+0x9ad/0x15e0
[ 3697.858034] ? __pfx_handle_ksmbd_work+0x10/0x10
[ 3697.858251] ? lock_release+0xf7/0x360
[ 3697.858466] ? process_scheduled_works+0x954/0x1600
[ 3697.858698] ? process_scheduled_works+0x954/0x1600
[ 3697.858905] process_scheduled_works+0xc22/0x1600
[ 3697.859368] ? __pfx_process_scheduled_works+0x10/0x10
[ 3697.859637] ? __pfx_assign_work+0x10/0x10
[ 3697.859896] ? lock_is_held_type+0x7b/0x110
[ 3697.860146] worker_thread+0x975/0xee0
[ 3697.860524] ? __pfx_do_raw_spin_lock+0x10/0x10
[ 3697.860830] ? __kthread_parkme+0x21e/0x260
[ 3697.861105] kthread+0x3a6/0x490
[ 3697.861423] ? __pfx_worker_thread+0x10/0x10
[ 3697.861643] ? __pfx_kthread+0x10/0x10
[ 3697.861878] ret_from_fork+0x55a/0xa20
[ 3697.862194] ? __pfx_ret_from_fork+0x10/0x10
[ 3697.862480] ? __pfx_kthread+0x10/0x10
[ 3697.862714] ret_from_fork_asm+0x1a/0x30
[ 3697.862965] </TASK>
[ 3697.863039]
[ 3697.938882] Allocated by task 20761:
[ 3697.940257] kasan_save_track+0x3e/0x80
[ 3697.941782] __kasan_kmalloc+0x72/0x90
[ 3697.943228] __kvmalloc_node_noprof+0x3e9/0x6a0
[ 3697.944948] handle_generic_event+0x59b/0x750
[ 3697.946592] genl_family_rcv_msg_doit+0x3d6/0x560
[ 3697.946977] genl_rcv_msg+0x67c/0x900
[ 3697.947224] netlink_rcv_skb+0x286/0x580
[ 3697.947488] genl_rcv+0x2d/0x80
[ 3
---truncated--- |
| Imager versions before 1.036 for Perl exit the process reading a TGA with a colour map length of 32768 or more in tga_palette_read.
The reader unpacks the two-byte colour map length into a signed short, so a length of 32768 or more becomes negative. tga_palette_read() casts that value to size_t and asks mymalloc() for a size near SIZE_MAX. The allocation fails and Imager's allocator calls exit(3).
Reading an attacker-supplied file through Imager->read() triggers an uncatchable exit. |
| ArcadeDB (Maven artifact com.arcadedb:arcadedb-engine) through 26.8.1 contains an incomplete deny-list in the polyglot script sandbox: com.arcadedb.query.polyglot.HostClassLookupFilter.DENIED lists java.util.ResourceBundle as a bare class name, which is matched by exact equality and therefore does not cover its subclasses, while ScriptTriggerExecutor.ALLOWED_PACKAGES permits java.util.*. A user with the UPDATE_SCHEMA privilege (sufficient to create or alter a JavaScript trigger; no server-admin rights required) can reference java.util.PropertyResourceBundle or java.util.ListResourceBundle and invoke the inherited static ResourceBundle.getBundle(String) to read .properties resources from the application classpath, which the sandbox (IOAccess.NONE, with java.io.**, java.nio.** and java.net.** denied) is intended to make unreachable. This can disclose packaged application configuration such as database credentials and API keys; the advisory states the issue does not provide arbitrary host filesystem read or remote code execution. Fixed in 26.9.1. |
| Imager versions before 1.036 for Perl disclose uninitialised heap memory reading a paletted image with pixel indexes past its colour map in i_gpix_p and i_glin_p.
The palette is allocated uninitialised, and only the entries a reader adds count as populated. The TGA reader stores pixel indexes without checking them against the colour map. i_gpix_p() rejects only an index greater than the count, so an index equal to it reads the first unpopulated entry, and getpixel() returns it.
i_glin_p() skips any index at or beyond the count without writing that pixel to the caller's buffer. The palette-to-RGB conversion reads each row through an uninitialised buffer, so those pixels of the converted image hold prior heap contents.
Reading an attacker-supplied image through Imager->read() and then fetching its pixels or converting it to RGB discloses process heap memory. |
| gptp_handle_msg() in subsys/net/l2/ethernet/gptp/gptp.c dereferenced the gPTP header returned by GPTP_HDR() and switched on hdr->message_type without first checking that the received frame carries at least sizeof(struct gptp_hdr) (34) bytes of payload. The header accessor gptp_get_hdr() deliberately never fails for a short buffer — it returns pkt->frags->data and leaves validation to its callers — so a truncated frame produced a header pointer covering memory beyond the received data. The per-message-type checks that follow do not compensate: GPTP_VALID_LEN() reduces to len > 60 once the Ethernet header has been pulled, which is false for every fixed-size gPTP message, so GPTP_CHECK_LEN() never rejects a truncated SYNC, FOLLOWUP, PDELAY_RESP or SIGNALING message.
The defect is reached by an unauthenticated peer on the same link sending an Ethernet frame with ethertype 0x88F7 to the PTP multicast address on an interface configured as a gPTP port, with CONFIG_NET_GPTP enabled. Because conformant Ethernet pads frames to 60 bytes, a payload shorter than 34 bytes generally requires a link that can deliver sub-minimum frames — for example the native_sim TAP driver (drivers/ethernet/eth_native_tap.c), which forwards whatever length the host device supplies, or a MAC configured to accept undersized frames.
The short packet is retained (net_pkt_ref() into rcvd_sync_ptr, rcvd_follow_up_ptr, rcvd_pdelay_resp_ptr or rcvd_announce_ptr) and later parsed by the media-dependent and media-independent state machines in subsys/net/l2/ethernet/gptp/gptp_md.c and subsys/net/l2/ethernet/gptp/gptp_mi.c, which read tens of further bytes and copy some of them (the announce priority vector, hdr->port_id) into state that is subsequently transmitted. Under the default fixed-size buffer allocator (CONFIG_NET_BUF_FIXED_DATA_SIZE, 128-byte fragments) the accesses stay inside the allocated fragment and disclose stale recycled buffer contents; under the experimental CONFIG_NET_BUF_VARIABLE_DATA_SIZE allocator, where fragments are heap-allocated at the exact frame length, they are genuine out-of-bounds reads. There is no write and no availability impact. |
| gptp_mi_qualify_announce() in subsys/net/l2/ethernet/gptp/gptp_mi.c walks the Path Trace TLV of a received IEEE 802.1AS Announce message, comparing each clock identity against the local one. The loop bound was taken solely from the attacker-controlled wire field announce->steps_removed (accepted up to 254), never from announce->tlv.len, which is the field that states how many identities the TLV actually carries. Because path_sequence is the flexible member of the wire TLV (struct gptp_path_trace_tlv) and GPTP_ANNOUNCE() yields a raw pointer into the received packet buffer, the memcmp() inside the loop can address memory well past the end of the received frame.
The stack's only length validation, GPTP_ANNOUNCE_CHECK_LEN(), requires the received gPTP payload to be exactly 68 + tlv.len bytes — so it does not constrain the loop, it guarantees the data is absent. An unauthenticated attacker on the same Ethernet segment can send a single Announce frame declaring tlv.len = 0 with steps_removed = 254; the frame passes the length check and reception path (net_gptp_recv() → gptp_handle_msg() → gptp_mi_qualify_announce()), which performs no authentication, and the loop then reads 255 entries of 8 bytes each — about 2 KB — beyond the end of the network buffer.
The impact is an out-of-bounds read. The bytes read are only used as a memcmp() operand and are never returned to the attacker, so there is no meaningful information disclosure; the practical risk is that the overread crosses a network buffer pool boundary into unmapped or MPU-protected memory and faults the networking RX thread, causing a denial of service. Exposure is limited to builds that enable the opt-in, experimental CONFIG_NET_GPTP (TSN/AVB deployments) and to attackers with layer-2 adjacency, since gPTP frames are sent to a link-local multicast address and are not routed.
The fix computes the true entry count as tlv.len / GPTP_CLOCK_ID_LEN and rejects the announce when steps_removed + 1 exceeds it, so the loop can no longer run past the data the packet-length check proved present. |
| Caddy is an extensible server platform that uses TLS by default. In version 2.11.3 and earlier, three configuration-dependent weaknesses affect the handler and placeholder layer. In modules/caddyhttp/rewrite/rewrite.go, Rewrite.Rewrite() can pass attacker-controlled replacement bytes through buildQueryString for a second placeholder expansion when a rewrite URI ends with a literal question mark, allowing injected environment or request-variable placeholders to disclose data and, when the file provider is registered, allowing injected file placeholders to disclose readable files. The issue is fixed in version 2.11.4. |
| A flaw was found in Netty's Online Certificate Status Protocol (OCSP) Client. The client fails to verify the 'id-kp-OCSPSigning' Extended Key Usage (EKU) in OCSP responder certificates. A remote attacker, holding any valid certificate issued by the same Certificate Authority (CA), can exploit this by forging 'GOOD' OCSP responses for revoked certificates. This bypasses certificate revocation checks, allowing applications using Netty's OCSP Client to accept certificates that should have been revoked, leading to an authorization bypass. |
| A flaw was found in Netty. A remote attacker could exploit this by sending a specially crafted HTTP request that includes control characters within the chunk-size line. This bypasses the intended strict validation, allowing the attacker to inject arbitrary HTTP requests. This vulnerability can lead to HTTP request smuggling, potentially resulting in information disclosure or other unauthorized actions. |
| A flaw was found in Netty's WebSocketServerExtensionHandler. A remote, unauthenticated attacker can exploit this vulnerability by using HTTP/1.1 pipelining to send requests faster than the application can respond. This leads to an unbounded growth of a per-connection queue, consuming excessive memory. Eventually, this can cause the Java Virtual Machine (JVM) to exhaust its heap, resulting in a Denial of Service (DoS) for the affected server. |
| A flaw was found in Netty. A reference-count leak in the HAProxy PROXY-v2 message decoder allows a remote, unauthenticated attacker to send specially crafted PROXY-protocol v2 headers. This can lead to memory exhaustion, resulting in a Denial of Service (DoS) for the affected system. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue
gred_enqueue(), bfifo_enqueue() and plug_enqueue() admit a packet when the
current backlog plus the packet length fits within the queue limit:
sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (gred default VQ)
gred_backlog+qdisc_pkt_len(skb) <= q->limit (gred configured VQ)
sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (bfifo)
sch->qstats.backlog + skb->len <= q->limit (plug)
sch->qstats.backlog and q->backlog are u32, and qdisc_pkt_len()/skb->len
are unsigned int, so all sums are computed in 32 bits and wrap at 2^32.
Once the true backlog exceeds 4 GiB the wrapped sum becomes small and
admission keeps succeeding, so the queue grows without bound and the kernel
can be driven to OOM.
Promote the sums to u64 so admission stops once the true backlog exceeds
the limit. The limit is u32, so the bounded queue stays below 2^32 and
the stored u32 backlog never wraps.
The bug can only be reproduced as root (albeit with ridiculous setup):
attach a gred (or bfifo/plug) qdisc with a limit near 4 GiB,
leaving the default VQ unconfigured (for gred), and drive >4 GiB of
queued traffic (e.g. via a size table / stab to inflate qdisc_pkt_len,
or sustained high-rate traffic). The u32 backlog+len sum wraps at 2^32,
admission keeps succeeding, and the queue grows unboundedly to OOM. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/hsmp: Reject negative power cap writes in hwmon
hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long
and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a
__u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write
to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge
unsigned value by the division and then stored into the u32 argument.
As a result a nonsensical, multi-gigawatt socket power limit is sent to
the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being
rejected.
Reject negative values with -EINVAL before the conversion.
Tested with HSMP enabled:
CAP=$(dirname $(grep -l amd_hsmp_hwmon \
/sys/class/hwmon/hwmon*/name | head -1))/power1_cap
# negative write
echo -1000000 > $CAP ; echo "ret=$?"
# valid positive write must still work
echo 400000000 > $CAP ; echo "ret=$?"
Before:
# echo -1000000 > $CAP ; echo "ret=$?"
ret=0 <- accepted; bogus limit sent to SMU
# echo 400000000 > $CAP ; echo "ret=$?"
ret=0
After:
# echo -1000000 > $CAP ; echo "ret=$?"
bash: echo: write error: Invalid argument
ret=1 <- rejected with -EINVAL
# echo 400000000 > $CAP ; echo "ret=$?"
ret=0 <- valid write still works |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.20.0, 3.1.15.0, and 3.2.0.3-beta1, A crafted cineon file can supply a numberofelements value greater than the format maximum of eight. cineoninput::open() uses that unchecked value as the loop bound while filling the fixed strings[8] array, writing pointers beyond the stack buffer and into adjacent state, resulting in memory corruption and denial of service. The affected implementation is identified by src/cineon.imageio/cineoninput.cpp, CineonInput::open(), numberOfElements, and strings[8], which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.20.0, 3.1.15.0, and 3.2.0.3-beta1. |
| NanoMQ is an MQTT broker. Prior to 0.24.14, NanoMQ's broker-side MQTT v5 nmq_subinfo_decode() function in nng/src/sp/protocol/mqtt/mqtt_parser.c reuses len_of_varint from the outer Properties Length while parsing each SUBSCRIPTION_IDENTIFIER. A remote client can send a SUBSCRIBE packet with a multi-byte Properties Length and repeated subscription identifiers, causing get_var_integer() to begin at an incorrect offset and read beyond the heap message buffer. The flaw is reachable through the broker receive path and can crash the broker, while the separately reported topic-option off-by-one occurs later and is not this vulnerability. This issue is fixed in version 0.24.14. |
| A vulnerability was identified in Totolink A3002MU Hh-B20211125.1046. Affected is the function formWlEncrypt of the file /boafrm/formWlEncrypt. The manipulation of the argument submit-url leads to buffer overflow. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. |
| On affected platforms running Arista EOS with Open Shortest Path First version 3 (OSPFv3) configured, a specially crafted packet can cause the OSPFv3 agent to restart unexpectedly. |
