Export limit exceeded: 399699 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (399699 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93264 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix PBL chunk length computation On register MR, when creating the PBL, if it's an indirect PBL we create a chunk list to hold the PBL pages pointers. Each chunk is 4KB in size and can hold 510 addresses (EFA_PTRS_PER_CHUNK) and has a 12-byte control buffer at the end of it holding the next chunk's pointer and its length. If the PBL number of pages is a multiple of EFA_PTRS_PER_CHUNK, the calculated last chunk length is wrongly computed as 0, even though that chunk is fully populated with 510 real page pointers. This wrong length is used both to DMA map the chunk and is propagated to the device, causing the device to see the chunk as empty and reject the memory registration. Fix the calculation so it will be performed only if the number of pages isn't a multiple of EFA_PTRS_PER_CHUNK, if it is, its already handled in the above loop correctly. Also prevent out-of-bounds reach in the chunks array in such scenario. | ||||
| CVE-2026-93265 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: tc9563: Fix parsing the integrated Ethernet MAC Endpoint node DSP3 has an integrated Ethernet MAC Endpoint which has its own set of config registers for configuring settings such as ASPM. The Endpoint device has two physical functions and those two functions share the same settings. Parse the Endpoint node under DSP3 instead of parsing both functions. The existing parsing logic also has one OOB issue as parsing both functions will result in accessing past the tc9563_pwrctrl->cfg array. | ||||
| CVE-2026-93272 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3 The changes introduced to handle single power domain platforms have swapped the info pointer increment from num_pd_vregs to num_pds, which would shift the info pointer past the end of the array for pronto-v3, which does not list power domain regulators in vregs. This showed up as a difference between GCC- and LLVM-compiled kernels on SDM632 devices, where only with LLVM one would get the "regulator request with no identifier" error, because the out-of-bounds memory ended up being zeroed. Fix by skipping the increment when there are more power domains than regulators. | ||||
| CVE-2026-93274 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: bcm2835: Don't remove an unregistered GPIO chip If the devm_pinctrl_register() function fails, bcm2835_pinctrl_probe() calls gpiochip_remove() before gpiochip_add_data() has registered the GPIO chip. This means that upon failure the gpio_chip.gpiodev is NULL resulting in a null pointer dereference inside the gpiochip_remove() function. Remove the unnecessary function call to gpiochip_remove(). No GPIO cleanup is required because the GPIO chip has not yet been registered. Without this change there is potential for a kernel panic upon registration failure | ||||
| CVE-2026-93279 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown The TX cleanup tasklet can be scheduled by the watchdog IRQ handler to execute cvm_oct_tx_do_cleanup. There can be a pending tasklet in the queue which might run after the cvm_oct_remove() frees net_device structures, causing a use-after-free in cvm_oct_tx_do_cleanup() as it iterates cvm_oct_device[] which is an array of netdevice pointers. Add tasklet_kill() after free_irq() to ensure the tasklet is no longer scheduled or running before teardown proceeds. | ||||
| CVE-2026-93283 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix device_register() error path When device_register() fails in i3c_master_register_new_i3c_devs(), put_device() is called to drop the reference taken by device_register(). That drops the last reference, so the device's release callback i3c_device_release() runs and frees the i3c_device. Two problems follow from that: i3c_device_release() does WARN_ON(i3cdev->desc), so it warns because desc->dev->desc still points back at the descriptor. Clear it before calling put_device(). After put_device() frees the i3c_device, desc->dev is left pointing at freed memory, so clear desc->dev as well. That prevents, for example, i3c_master_unregister_i3c_devs() seeing desc->dev as non-NULL and dereferencing it. | ||||
| CVE-2026-98090 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: restore active device pointers after failed sprout btrfs_init_new_device() switches latest_dev and possibly s_bdev from the seed device to the new sprout device before creating the first writable chunks. If chunk creation or the subsequent sprout setup fails, the error path releases the new device without switching those pointers back. btrfs_show_devname() can then dereference the freed latest_dev and crash. Restore the active device pointers to the latest seed device before removing and releasing the failed sprout device. | ||||
| CVE-2026-97998 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: cope with concurrent instance destruction Instances are refcounted. However, only memory release happens on the 1 -> 0 transition; the unlink from hashes can occur with any refcount. Uncooperative userspace can force a situation where a queue is pending for destruction from netlink event while a different socket with same portid processes an UNBIND request. With right timing, this will unhash the instance again: Oops: general protection fault, [..] Call Trace: <TASK> nfulnl_recv_config+0x31a/0xd50 nfnetlink_rcv_msg+0x7c2/0xeb0 | ||||
| CVE-2026-97985 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Update last skb marker in manage_oob(). Fahad Alharbi reported that blocking recv(MSG_PEEK) could hog CPU due to OOB skb. In the following cases, manage_oob() skips OOB skb(s) and returns NULL for the last recv(MSG_PEEK): socketpair(AF_UNIX, SOCK_STREAM, 0, sk); 1) skb -> OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 2) skb -> consumed OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 1, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 3) consumed OOB skb -> OOB skb -> NULL send(sk[0], "a", 1, MSG_OOB); recv(sk[1], buf, 0, MSG_OOB); send(sk[0], "b", 1, MSG_OOB); recv(sk[1], buf, 1, MSG_PEEK); Then, @copied is 0 in unix_stream_read_generic() (zero-length buffer, or non-OOB skb is not yet consumed), and unix_stream_data_wait() is called. However, it returns immediately because @last is not updated in unix_stream_read_generic(), and the thread busy-waits for a new skb. Let's update @last in manage_oob(). For MSG_PEEK, @last is updated with the skipped OOB, and for the non-peek case, @last matches the returned value (when !copied) because OOB is unlinked. Note that manage_oob() is inlined and no stack canary is added. | ||||
| CVE-2026-97976 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate packet_len before skb_put_data btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without checking if it exceeds the RX buffer size. An oversized packet_len can lead to an out-of-bounds read in skb_put_data(). Validate packet_len to ensure it is non-zero and does not exceed BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when invalid. This issue was reported by Claude Mythos. It can be simulated either by using customized firmware configured to return an invalid packet_len or by modifying rfh_hdr->packet_len in the driver before calling btintel_pcie_submit_rx_work(). | ||||
| CVE-2026-39708 | 2 Uicore, Wordpress | 2 Uicore Elements, Wordpress | 2026-09-25 | 6.5 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in UiCore UiCore Elements uicore-elements allows Stored XSS.This issue affects UiCore Elements: from n/a through 1.3.17. | ||||
| CVE-2025-64289 | 3 Premmerce, Woocommerce, Wordpress | 4 Premmerce, Product Search For Woocommerce, Woocommerce and 1 more | 2026-09-25 | 5.9 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Premmerce Premmerce Product Search for WooCommerce premmerce-search allows Stored XSS.This issue affects Premmerce Product Search for WooCommerce: from n/a through 2.2.7. | ||||
| CVE-2026-93284 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: dma-unmap pages before handling migration errors drm_pagemap_migrate_unmap_pages() relies on the pages array to determine which pages require DMA unmapping. However, drm_pagemap_migration_unlock_put_pages() clears the array as part of its cleanup, leaving drm_pagemap_migrate_unmap_pages() with no valid page information if it is called afterward. Call drm_pagemap_migrate_unmap_pages() before drm_pagemap_migration_unlock_put_pages() so the pages array remains valid during DMA unmapping. | ||||
| CVE-2026-97417 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack() The timestamp-only fast path dereferences the option stream as *(__be32 *)ptr, which assumes 4-byte alignment that the TCP option stream does not guarantee. Use get_unaligned_be32() instead, which reads the value safely and already returns host byte order, so the htonl() on the comparison constant can be dropped. This matches the existing get_unaligned_be32() use later in the same function. | ||||
| CVE-2026-81792 | 2 Multivendorx, Wordpress | 2 Product Catalog Enquiry For Woocommerce By Multivendorx, Wordpress | 2026-09-25 | 6.5 Medium |
| Incorrect Privilege Assignment vulnerability in MultiVendorX Product Catalog Enquiry for WooCommerce by MultiVendorX woocommerce-catalog-enquiry allows Privilege Escalation.This issue affects Product Catalog Enquiry for WooCommerce by MultiVendorX: from n/a through 6.1.5. | ||||
| CVE-2026-93285 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: embed f2fs_gc_kthread in f2fs_sb_info Instead of allocating f2fs_gc_kthread dynamically, embed it in f2fs_sb_info. This simplifies lifetime management and prepares for fixing race conditions during teardown. - __sbi_store - remount|shutdown - f2fs_stop_gc_thread - access sbi->gc_thread - sbi->gc_thread = NULL - access sbi->gc_thread->f2fs_gc_task | ||||
| CVE-2026-52853 | 1 Docmost | 1 Docmost | 2026-09-25 | 5.2 Medium |
| Docmost is open-source collaborative wiki and documentation software. Prior to 0.90.1, an authenticated workspace ADMIN can use the workspace invitation flow to invite an external email address with the OWNER role because the role ceiling does not prevent ADMIN users from granting privileges above their own. When the invitation is accepted, the new account receives OWNER-level permissions, allowing the ADMIN to create a backdoor OWNER account or promote a colluding external user to the workspace's highest privilege level. This issue is fixed in version 0.90.1. | ||||
| CVE-2026-92106 | 1 Dashbitco | 1 Lazy Html | 2026-09-25 | N/A |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in dashbitco lazy_html allows mutation XSS via a parse and serialize round-trip of attacker-supplied HTML. LazyHTML.to_html/2 and LazyHTML.Tree.to_html/2 decide whether to escape an element's text from its tag name alone. A style or script element inside SVG or MathML foreign content is parsed with character references decoded, but is serialized as an HTML raw-text element, so its text is emitted unescaped. Encoded markup such as </style><img src=x onerror=...> inside <svg><style> therefore closes the element on re-parse and becomes live markup. Applications that parse untrusted HTML with lazy_html, filter the document or tree, and serialize it for display are affected, since the payload is a plain text node that no element or attribute filter sees. This issue affects lazy_html: from 0.1.0 before 0.1.13. | ||||
| CVE-2026-97724 | 1 Swmansion | 1 React Native Reanimated | 2026-09-25 | 4.3 Medium |
| A prototype pollution vulnerability in Software Mansion React Native Worklets before 0.12.2 allows an attacker-controlled object containing a __proto__ property to modify the prototype of an object created during serialization in clonePlainJSObject in packages/react-native-worklets/src/memory/serializable.native.ts. When affected data is subsequently processed by React Native Worklets, the malformed serialized object can cause the React Native application to crash. This can result in a remotely triggered denial of service in applications that pass attacker-controlled data through the affected serialization path. In applications where the attacker-controlled data is persisted, the denial of service may persist across application restarts or repeated attempts to access the affected content. | ||||
| CVE-2026-97731 | 1 Minio | 1 Minio | 2026-09-25 | 7.1 High |
| MinIO through 7aac2a2 does not verify that every x-amz-* header present on a request also appears in the client-supplied X-Amz-SignedHeaders list. extractSignedHeaders() in cmd/signature-v4-utils.go iterates only the claimed list and never enumerates the headers that actually arrived, and thus a header that arrives unsigned is neither hashed into the canonical request nor rejected. Because cmd/api-router.go dispatches CopyObject on the presence of x-amz-copy-source alone, the holder of a presigned PUT URL scoped to a single object can add that header to the unmodified URL and cause a server-side copy, executed as the signer, of any object the signing key can read. A grant to write one object becomes a read of every bucket that key can reach. Amazon S3 rejects the equivalent request with HTTP 403 AccessDenied. The minio/minio GitHub repository was archived in April 2026; pgsty/silo before 1233254 is also affected. | ||||