| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/syscall: Fix syscall skip handling for seccomp and ptrace
After enabling GENERIC_ENTRY on PowerPC, syscall_enter_from_user_mode()
returns -1 as a sentinel to signal that seccomp or ptrace has intercepted
the syscall and already set a return value via syscall_set_return_value().
system_call_exception() was not handling this sentinel, and since -1UL
is >= NR_syscalls, the code fell into the out-of-range path and returned
-ENOSYS, overwriting the errno already placed in regs->gpr[3].
The naive fix of checking r0 == -1L before the NR_syscalls bounds check
is ambiguous: a user legitimately calling syscall(-1) also produces r0 ==
-1L, and a tracer intercepting such a call would have its injected return
value silently discarded.
Fix this by introducing a thread flag that is set whenever
syscall_set_return_value() explicitly updates the return value. In
system_call_exception(), check and clear this flag before dispatching
the syscall, and return the preset value directly when it is present.
This ensures that an explicitly supplied return value always suppresses
syscall execution, regardless of the syscall number.
This handles all seccomp actions correctly:
- SECCOMP_RET_ERRNO, SECCOMP_RET_TRACE (no tracer), SECCOMP_RET_USER_NOTIF:
all call syscall_set_return_value(), flag is set, injected value returned.
- SECCOMP_RET_TRAP, SECCOMP_RET_KILL: call syscall_rollback() and deliver
a signal; flag is not set, but the process is dying so the return value
is irrelevant.
The fix covers both ppc32 and ppc64 with no #ifdefs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix out-of-bounds access in mmio copy helpers
mt76_mmio_write_copy() and mt76_mmio_read_copy() iterate up to
ALIGN(len, 4), so a length that is not a multiple of four reads past the
source buffer (write_copy) or writes past the destination (read_copy).
Copy the aligned body in the loop and handle the remaining tail through a
4-byte bounce buffer, keeping the register access width unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: avoid nss underflow in mt7915_mcu_get_sta_nss
If a peer's VHT/HE MCS map has no supported spatial stream (all fields
0x3), the loop exits with nss == 0 and the function returned (u8)-1 (255),
which was then written into the firmware sta_rec_bf beamforming fields.
Clamp the result to 0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Add vm_bind region with kbo range overlap check
When a VM is created, caller has to specify the range of the address space
carve-out set aside for mapping kernel BO's. That means vm_bind mappings of
UM-exposed BO's should not intersect with that region, but at the moment
we're not checking this.
At first, I thought of giving these values to drm_gpuvm_init() through its
reserve_{offset, range} arguments, but it turns out that is meant for VM
address spans that are not managed through the usual drm_gpuvm split/merge
circuit, so storing the end of the user VA range at VM creation time and
doing a quick check in the vm_bind ioctl path was the simplest workaround.
The new check also makes sure vm_bind range doesn't overflow the size of a
64-bit unsigned integer. That was already being done further down the call
stack inside drm_gpuvm_sm_map -> drm_gpuvm_range_valid, but it's best to
fail early in the driver before GPUVM functions are invoked so that we
won't waste time allocating vm_bind context resources. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: debugfs: Reserve space for a string terminator
ufs_saved_err_write() copies user input into a zero-initialized stack
buffer and passes it to kstrtoint(). A write that fills the entire buffer
overwrites its only terminator.
Reject an input whose length leaves no room for the trailing NUL. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Avoid buffer overread in ath12k_wmi_op_rx()
Currently, in ath12k_wmi_op_rx(), the firmware buffer is read without
first verifying that the buffer has enough data to hold a header. This
could result in a buffer overread.
Update the logic to verify the buffer contains at least enough data to
hold a wmi_cmd_hdr before reading from the buffer.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Avoid stack over-read in debug output helpers
host1x_debug_output() and host1x_debug_cont() used vsnprintf(), which
returns the length the formatted string would have reached with an
unbounded buffer. That return value was passed straight to o->fn as
the number of bytes to emit.
This could cause a read past end of the output buffer if a call to
host1x_debug_* produced a string longer than 256 bytes. This only
affected the debugfs files as the printk debug sink ignores the
number of bytes. In practice, this is very unlikely to occur.
Fix by switching to vscnprintf(), which returns the number of bytes
actually written. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs
The loop counter 'count' was declared as u8 while num_pc is u32.
If firmware advertises more than 255 PC entries the counter wraps
back to zero and the loop never terminates potentially causing an
infinite loop or reading past the allocated pc_data array.
Change the declaration to u32 to match num_pc. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: tc358767: clamp the reported AUX read size to the request
tc_aux_transfer() clamps an AUX read to the payload limit:
size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
After the transfer it replaces size with the byte count the controller
reports in AUX_BYTES:
if (size)
size = FIELD_GET(AUX_BYTES, auxstatus);
AUX_BYTES is GENMASK(15, 8), so it can be up to 255. Nothing clamps it
back to the request. tc_aux_read_data() reads that many bytes into the
16-byte auxrdata stack buffer, then copies them into the caller buffer. A
reported count of 255 makes the read run to 256 bytes and overruns both.
The controller should never report more than it was asked to transfer, so
this is defense in depth rather than a live hole. The reported count is
only lightly trusted, and the check is cheap. Clamp it back to the request,
the same way ti-sn65dsi86 does in commit aca58eac52b8 ("drm/bridge:
ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer"). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Reject Set Features output buffer smaller than the header
cxlctl_set_feature() sizes its output buffer from the user's
fwctl_rpc.out_len but never checks it is large enough to hold even the
fwctl_rpc_cxl_out header. With out_len == 0 , kvzalloc() returns
ZERO_SIZE_PTR, which passes the !rpc_out check, the subsequent
rpc_out->size = 0 then writes through the poison pointer.
Reject requests whose output buffer can't hold the response header,
before allocating. The Set Feature reply carries no payload, so the
header is all that is required. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: avoid buffer overreads in WMI event handlers
The following WMI event handlers currently read from the event buffer
without first verifying that the message was large enough to hold the
expected event:
ath6kl_wmi_scan_complete_rx()
ath6kl_wmi_addba_req_event_rx()
ath6kl_wmi_delba_req_event_rx()
Add length checks to prevent overread. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: validate dynamic counter attribute length
RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is a nested attribute whose children are
consumed directly with nla_get_u32(). The top-level policy validates only
the container, so it does not establish the fixed shape of each child.
Require every child payload to be exactly one u32 before reading it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments
Make sure we don't end-up with a num_frags = 0 situation.
For that, check that the required size is not 0 and put a checker on
num_frags as well. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix off-by-one in TXF key sanitiser
iwl_mvm_frob_txf_key_iter() tracks the last matched byte position
in loop variable 'i'. When a full key match is found (match ==
keylen), 'i' points at the last byte of the matched key. The
memset start offset should therefore be i + 1 - keylen, not
i - keylen; the current code zeroes one byte before the match
and leaves the final key byte un-sanitised. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Fix AEAD unregister count in error path
register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same call, while this function must still unwind earlier
successful registration steps. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Clamp Get Feature output size to the remaining buffer
cxl_get_feature() reads a feature in a loop but passes a fixed size_out
as the output capacity every iteration. On the last partial iteration
the buffer has less room left, so a device that returns more than asked
can overflow feat_out.
Use the per-iter size data_to_rd_size, which already tracks the
remaining room, as the output capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/mbox: Clamp mailbox output allocation to the payload size
CXL_MEM_SEND_COMMAND bounds the user's in.size to the mailbox payload
size but leaves out.size unbounded, then cxl_mbox_cmd_ctor() calls
kvzalloc(out.size). A large out.size drives a huge allocation, above
INT_MAX it WARNs and taints, and with panic_on_warn=1 it panics.
The transport __cxl_pci_mbox_send_cmd() already clamps the response copy
to min(out.size, payload_size, device len), so the output buffer is
never written beyond payload_size. Clamp the allocation to payload_size
too, matching the RAW path. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: bound device-supplied profile index
kone_keep_values_up_to_date() and kone_profile_activated() use an
8-bit, device-supplied profile value as an index into the 5-element
kone->profiles[] array without a range check. A malicious USB device
claiming the Roccat Kone id can send a switch-profile event (or a
startup_profile read at probe) with an out-of-range value and make the
driver read out of bounds; the result is exposed via the actual_dpi
sysfs attribute.
Reject out-of-range indices in both paths.
This was found with static analysis and confirmed with the KUnit test
added in the following patch (KASAN: slab-out-of-bounds). |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix recursive locking during device registration
i3c_master_register_new_i3c_devs() registers newly discovered devices
while holding i3c_bus_normaluse_lock(), a down_read(). device_register()
can immediately probe the device, and probe callbacks typically invoke
I3C helpers that take i3c_bus_normaluse_lock() again, leading to a
recursive acquisition of the same rwsem. rwsems do not support recursive
read locking and can deadlock when a writer is waiting. See the
"Recursive read locks" section of Documentation/locking/lockdep-design.rst.
For example, with Intel LPSS I3C, LOCKDEP generates a WARNING like:
# echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/unbind
# echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/bind
WARNING: possible recursive locking detected
kworker/5:1/94 is trying to acquire lock:
ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_device_match_id+0x45/0x370
but task is already holding lock:
ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_master_reg_work_fn+0x21/0x5f0
Fix this by separating device creation from device registration.
Populate desc->dev under the maintenance lock, collect the devices that
still need registration into a local list, then release the lock before
calling device_register(). Finally retake the lock and clean up any
devices that failed to register.
Use the maintenance lock rather than the normal-use lock while adding
device objects. A write-side maintenance lock prevents readers from
observing a partially initialized desc->dev during initial device
population, or desc->dev disappearing if registration fails.
The local list requires a list node, so add a list node member to struct
i3c_device. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ljca: bound bank_num in ljca_enumerate_gpio()
ljca_enumerate_gpio() reads desc->bank_num from the device and loops
valid_pin[i] = get_unaligned_le32(...) for i < bank_num. valid_pin[]
holds only LJCA_MAX_GPIO_NUM / 32 = 2 entries.
Two checks run before the loop. The reply length must match
struct_size(desc, bank_desc, bank_num). The product
pins_per_bank * bank_num must not exceed LJCA_MAX_GPIO_NUM. Neither one
bounds bank_num against the size of valid_pin[]. The reply is capped at
LJCA_MAX_PAYLOAD_SIZE (60) bytes, so the struct_size check limits
bank_num to 9. A device that reports bank_num 9 with pins_per_bank 7
still passes both checks. gpio_num is 63 and the reply is 56 bytes. The
loop then writes nine u32 into the two entry array and overruns
valid_pin[] on the stack.
A broken or malicious LJCA device can therefore overflow the stack.
Reject a bank_num that does not fit valid_pin[]. |
