| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Reject Set Features output buffer smaller than the header
cxlctl_set_feature() sizes its output buffer from the user's
fwctl_rpc.out_len but never checks it is large enough to hold even the
fwctl_rpc_cxl_out header. With out_len == 0 , kvzalloc() returns
ZERO_SIZE_PTR, which passes the !rpc_out check, the subsequent
rpc_out->size = 0 then writes through the poison pointer.
Reject requests whose output buffer can't hold the response header,
before allocating. The Set Feature reply carries no payload, so the
header is all that is required. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux
bpf_get_btf_vmlinux() lazily parses the vmlinux BTF under the
bpf_verifier_lock, but publishes the result through a plain store
and re-checks it through a plain lockless load. Nothing orders
the stores initializing the struct btf inside btf_parse_vmlinux()
against the store publishing the pointer: On a weakly ordered
arch, a concurrent first-time caller taking the lockless fast
path could in principle observe the pointer before the parsed
contents are visible. The mutex_unlock() does not help such a
reader given it only synchronizes with a later acquisition of the
same lock. Thus, publish the pointer with smp_store_release()
and read it on the fast path with smp_load_acquire().
Acquire semantics are needed rather than a dependency-ordered
READ_ONCE(): btf_parse_vmlinux() also populates globals outside
the returned object (e.g. bpf_ctx_convert.t). An address
dependency would only order accesses performed through the
pointer and not cover other globals. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: dw_dp: Release core resources
Core resources such as the DisplayPort AUX channel get initialized and
registered during dw_dp_bind(), but are never unregistered, which may
lead to memory leaks and/or use-after-free:
[ 224.661371] BUG: KASAN: slab-use-after-free in device_is_dependent+0xe0/0x2b0
[ 224.662015] Read of size 8 at addr ffff00011aee8550 by task modprobe/658
[ 224.662612]
[ 224.662752] CPU: 7 UID: 0 PID: 658 Comm: modprobe Not tainted 7.0.0-rc2-next-20260305 #14 PREEMPT
[ 224.662759] Hardware name: Radxa ROCK 5B (DT)
[ 224.662762] Call trace:
[ 224.662764] show_stack+0x20/0x38 (C)
[ 224.662772] dump_stack_lvl+0x6c/0x98
[ 224.662777] print_report+0x160/0x4b8
[ 224.662783] kasan_report+0xb4/0xe0
[ 224.662790] __asan_report_load8_noabort+0x20/0x30
[ 224.662796] device_is_dependent+0xe0/0x2b0
[ 224.662802] device_is_dependent+0x108/0x2b0
[ 224.662808] device_link_add+0x1f8/0x10b0
[ 224.662813] devm_of_phy_get_by_index+0x120/0x200
[ 224.662819] dw_dp_bind+0x34c/0xb10 [dw_dp]
[ 224.662830] dw_dp_rockchip_bind+0x194/0x250 [rockchipdrm]
[ 224.662864] component_bind_all+0x3a8/0x720
[ 224.662869] rockchip_drm_bind+0x120/0x390 [rockchipdrm]
[ 224.662899] try_to_bring_up_aggregate_device+0x76c/0x838
[ 224.662904] component_master_add_with_match+0x1f4/0x230
[ 224.662909] rockchip_drm_platform_probe+0x420/0x538 [rockchipdrm]
[ 224.662939] platform_probe+0xe8/0x168
[ 224.662945] really_probe+0x340/0x828
[ 224.662950] __driver_probe_device+0x2e0/0x350
[ 224.662954] driver_probe_device+0x80/0x140
[ 224.662959] __driver_attach+0x398/0x460
[ 224.662964] bus_for_each_dev+0xe0/0x198
[ 224.662968] driver_attach+0x50/0x68
[ 224.662972] bus_add_driver+0x2a0/0x4c0
[ 224.662977] driver_register+0x294/0x360
[ 224.662982] __platform_driver_register+0x7c/0x98
[ 224.662987] rockchip_drm_init+0xc4/0xff8 [rockchipdrm]
Since a previous commit exported dw_dp_unbind() function in DW DP core
library to take care of the necessary cleanup, use this in the
component's unbind() callback, as well as in its bind() error path. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak
rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to
NULL before any pending streaming teardown has run. When user space
later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming()
which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases
each coherent buffer with:
usb_free_coherent(dev->udev, dev->buf_size,
dev->buf_list[dev->buf_num],
dev->dma_addr[dev->buf_num]);
usb_free_coherent() returns immediately when its dev argument is NULL,
so every DMA stream buffer that was live at disconnect is silently
leaked. The URBs allocated in rtl2832_sdr_alloc_urbs() outlive the
device for the same reason.
The rtl2832_sdr driver uses vb2_fop_release() in its file_operations,
so replace video_unregister_device(&dev->vdev) with
vb2_video_unregister_device(&dev->vdev) and move it before clearing
dev->udev. vb2_video_unregister_device() releases the vb2 queue, which
synchronously runs rtl2832_sdr_stop_streaming() if streaming is active,
so URBs and coherent DMA stream buffers are freed while dev->udev is
still valid.
vb2_video_unregister_device() locks vdev->queue->lock (vb_queue_lock)
internally, and stop_streaming() locks v4l2_lock, so the previous outer
mutex_lock(&dev->vb_queue_lock) / mutex_lock(&dev->v4l2_lock) pair
around the unregister sequence would self-deadlock and has been removed.
A short v4l2_lock critical section around dev->udev = NULL remains so
any ioctl path that still holds the file descriptor sees coherent state.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/ |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix use-after-free in find_pos_and_ways() error path
The error path releases its reference to a switch decoder before
logging an error that includes the decoder name. If the released
reference is the last one, the decoder can be freed before the error
message accesses its name.
Drop the reference after the error is reported. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Roll back partial protocol table registration
scmi_protocol_table_register() can leave earlier requests registered when
a later entry in the same ID table fails. Each request retains a pointer
to the driver's ID table, so a failed module load can leave a dangling
pointer after the module storage is released.
Unrequest only the successfully registered prefix, in reverse order,
before returning the failure. Leave the failed entry and the remaining
entries untouched because matching requests can be owned by another
driver. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: avoid buffer overreads in WMI event handlers
The following WMI event handlers currently read from the event buffer
without first verifying that the message was large enough to hold the
expected event:
ath6kl_wmi_scan_complete_rx()
ath6kl_wmi_addba_req_event_rx()
ath6kl_wmi_delba_req_event_rx()
Add length checks to prevent overread. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate readdir offset before accessing dirent
A corrupted directory can trigger the following KASAN report when
ext4_readdir() resumes from an invalid position:
BUG: KASAN: use-after-free in __ext4_check_dir_entry+0x5ef/0x820
Read of size 2 at addr ffff88810a646000 by task repro_linear/509
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x630
kasan_report+0xce/0x100
__ext4_check_dir_entry+0x5ef/0x820
ext4_readdir+0xcde/0x2b70
iterate_dir+0x1a1/0x520
__x64_sys_getdents64+0x12b/0x220
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
KASAN reports use-after-free because the out-of-bounds access lands in an
adjacent freed page. The directory buffer itself is still referenced.
ext4_dir_llseek() invalidates the directory cookie so that ext4_readdir()
rescans directory entries from the start of the block. The rescan checks
only the lower bound of rec_len before advancing. A corrupted rec_len can
therefore place the offset where the block has insufficient space for a
complete directory entry. The rescan itself may dereference that truncated
entry, or the main loop may pass it to __ext4_check_dir_entry(). The latter
reads de->rec_len before validating the range. For example:
block offset 0 4092 4096
|---- de1.rec_len = 4092 -----|----|
de2.inode
| de2.rec_len
^ OOB, reported as UAF
de2 starts at offset 4092 in this 4 KiB block. Its four-byte inode fits in
the block, but its rec_len starts at offset 4096 and crosses the boundary.
The minimum safe length is inode-dependent. Encrypted and casefolded
directory entries need eight additional hash bytes, while a valid metadata
checksum tail is only 12 bytes.
Cache the metadata checksum feature state and derive the minimum directory
entry length from the on-disk format. Use it to bound both the rescan and
the offset passed to the main loop. Report an offset in a truncated block
tail and skip the remainder of the block, while continuing to accept an
offset exactly at the block boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix undefined behavior in devid_write debugfs function
When for_each_pci_segment() loop completes without finding a matching
segment, the pci_seg pointer is not NULL but points to an invalid memory
location (the list head). Accessing pci_seg->id after the loop causes
undefined behavior.
Fix this by handling the successful case inside the loop and returning
-EINVAL after the loop if no matching segment is found. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: validate dynamic counter attribute length
RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is a nested attribute whose children are
consumed directly with nla_get_u32(). The top-level policy validates only
the container, so it does not establish the fixed shape of each child.
Require every child payload to be exactly one u32 before reading it. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: dac: ad5686: missing NULL check on match data
Verify that chip_info pointer is not NULL. If a user binds the driver
using driver_override via sysfs with a device name not present in the
id_table or of_match_table, match data will be NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Serialize channel state checks
pause() and resume() read and update channel state without holding vc.lock,
while the interrupt handlers update the same state under it. Take the same
lock around those state checks so that request, status, and configured stay
consistent.
For example, pause() can observe EDMA_ST_BUSY right before the interrupt
handler completes the final descriptor and moves the channel to
EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No
further interrupt will acknowledge the request, and since issue_pending()
requires EDMA_REQ_NONE, the channel is wedged for good: terminate_all()
leaves the stale request behind, so even reconfiguring the channel does not
recover it.
issue_pending() already runs under vc.lock, but it tests configured before
taking it. Move that test under the lock as well, so configured, request,
and status are evaluated as one channel-state snapshot. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Unregister device notifier before IDR teardown
The requested-devices notifier looks up protocol fwnodes from the
active_protocols IDR. During remove, unregister the notifier before
releasing and destroying active_protocols so no notifier callback can race
with the IDR teardown.
Keep the bus notifier registered until after the protocol state is torn
down, matching the existing remove ordering for SCMI bus users. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
mlxbf_pmc_probe() passes the result of ACPI_COMPANION() to
acpi_device_hid(), which dereferences it, so force-binding the driver to
a device without an ACPI companion leads to a NULL pointer dereference.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
mlxbf-pmc driver and return -ENODEV when the companion is missing. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: bcm-vk: Use acquire/release for msgq_inited
bcm_vk_sync_msgq() fills the message queue information and then sets
msgq_inited. Readers call bcm_vk_drv_access_ok() before accessing the
message queues and their cached queue information.
atomic_set()/atomic_read() do not order those accesses. A reader can see
msgq_inited set while still seeing stale queue information. Use release
when publishing the initialized queues and acquire when checking the gate.
Keep the clear in bcm_vk_blk_drv_access() as atomic_set(). It closes the
gate and does not publish queue state to readers. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Avoid possible memory reclaim deadlock in TX EQTR context
TX EQTR may run while devfreq gear scaling has quiesced the UFS
tagset. In that context, functions ufshcd_tx_eqtr(), __ufshcd_tx_eqtr()
and ufs_qcom_get_rx_fom() allocate memory with GFP_KERNEL. If direct
reclaim is triggered, reclaim/writeback can depend on I/O to UFS
device. Because the queue is quiesced, this can cause deadlock.
Use memalloc_noio_save/restore() in ufshcd_tx_eqtr() to cover all
allocations in the TX EQTR call tree, including:
- params->eqtr_record in ufshcd_tx_eqtr()
- eqtr_data in __ufshcd_tx_eqtr()
- params in ufs_qcom_get_rx_fom()
This is preferred over tagging individual call sites with GFP_NOIO, as it
automatically covers any future allocations added anywhere in the call tree
without requiring each caller to be aware of this constraint.
[mkp: fix label as suggested by Bart] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments
Make sure we don't end-up with a num_frags = 0 situation.
For that, check that the required size is not 0 and put a checker on
num_frags as well. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix off-by-one in TXF key sanitiser
iwl_mvm_frob_txf_key_iter() tracks the last matched byte position
in loop variable 'i'. When a full key match is found (match ==
keylen), 'i' points at the last byte of the matched key. The
memset start offset should therefore be i + 1 - keylen, not
i - keylen; the current code zeroes one byte before the match
and leaves the final key byte un-sanitised. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix resource leak on module load failure
We need to properly clean up the SMBIOS request and the privacy driver
when the module load fails. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/rcar: Fix error checking in probe()
This code accidentally calls thermal_zone_device_enable() before checking
whether thermal_zone_device_register_with_trips() failed. Move the call
until later to avoid an error pointer dereference of "priv->zone".
The driver works differently depending on if we are using OF thermal or
not. We use thermal_add_hwmon_sysfs() if we are using OF thermal and
call thermal_zone_device_enable() if not. We can share same error check
for if either of these fail.
Moving the thermal_zone_device_enable() call is a bit cleaner as well.
The original code used a three step process to cleanup:
1. Call thermal_zone_device_unregister() to cleanup.
2. Set priv->zone to an error pointer to preserve the error code.
3. Set priv->zone to NULL to avoid a second call to
thermal_zone_device_unregister() in the rcar_thermal_remove()
function.
Now we can just do a direct goto error_unregister and rcar_thermal_remove()
handles the cleanup properly. |
