Export limit exceeded: 357828 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 357828 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (357828 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46306 | 1 Linux | 1 Linux Kernel | 2026-06-14 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: flow_dissector: do not dissect PPPoE PFC frames RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT RECOMMENDED for PPPoE. In practice, pppd does not support negotiating PFC for PPPoE sessions, and the flow dissector driver has assumed an uncompressed frame until the blamed commit. During the review process of that commit [1], support for PFC is suggested. However, having a compressed (1-byte) protocol field means the subsequent PPP payload is shifted by one byte, causing 4-byte misalignment for the network header and an unaligned access exception on some architectures. The exception can be reproduced by sending a PPPoE PFC frame to an ethernet interface of a MIPS board, with RPS enabled, even if no PPPoE session is active on that interface: $ 0 : 00000000 80c40000 00000000 85144817 $ 4 : 00000008 00000100 80a75758 81dc9bb8 $ 8 : 00000010 8087ae2c 0000003d 00000000 $12 : 000000e0 00000039 00000000 00000000 $16 : 85043240 80a75758 81dc9bb8 00006488 $20 : 0000002f 00000007 85144810 80a70000 $24 : 81d1bda0 00000000 $28 : 81dc8000 81dc9aa8 00000000 805ead08 Hi : 00009d51 Lo : 2163358a epc : 805e91f0 __skb_flow_dissect+0x1b0/0x1b50 ra : 805ead08 __skb_get_hash_net+0x74/0x12c Status: 11000403 KERNEL EXL IE Cause : 40800010 (ExcCode 04) BadVA : 85144817 PrId : 0001992f (MIPS 1004Kc) Call Trace: [<805e91f0>] __skb_flow_dissect+0x1b0/0x1b50 [<805ead08>] __skb_get_hash_net+0x74/0x12c [<805ef330>] get_rps_cpu+0x1b8/0x3fc [<805fca70>] netif_receive_skb_list_internal+0x324/0x364 [<805fd120>] napi_complete_done+0x68/0x2a4 [<8058de5c>] mtk_napi_rx+0x228/0xfec [<805fd398>] __napi_poll+0x3c/0x1c4 [<805fd754>] napi_threaded_poll_loop+0x234/0x29c [<805fd848>] napi_threaded_poll+0x8c/0xb0 [<80053544>] kthread+0x104/0x12c [<80002bd8>] ret_from_kernel_thread+0x14/0x1c Code: 02d51821 1060045b 00000000 <8c640000> 3084000f 2c820005 144001a2 00042080 8e220000 To reduce the attack surface and maintain performance, do not process PPPoE PFC frames. [1] https://lore.kernel.org/r/20220630231016.GA392@debian.home | ||||
| CVE-2026-46304 | 1 Linux | 1 Linux Kernel | 2026-06-14 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: avoid recursive nvmet-wq flush in nvmet_ctrl_free nvmet_tcp_release_queue_work() runs on nvmet-wq and can drop the final controller reference through nvmet_cq_put(). If that triggers nvmet_ctrl_free(), the teardown path flushes ctrl->async_event_work on the same nvmet-wq. Call chain: nvmet_tcp_schedule_release_queue() kref_put(&queue->kref, nvmet_tcp_release_queue) nvmet_tcp_release_queue() queue_work(nvmet_wq, &queue->release_work) <--- nvmet_wq process_one_work() nvmet_tcp_release_queue_work() nvmet_cq_put(&queue->nvme_cq) nvmet_cq_destroy() nvmet_ctrl_put(cq->ctrl) nvmet_ctrl_free() flush_work(&ctrl->async_event_work) <--- nvmet_wq Previously Scheduled by :- nvmet_add_async_event queue_work(nvmet_wq, &ctrl->async_event_work); This trips lockdep with a possible recursive locking warning. [ 5223.015876] run blktests nvme/003 at 2026-04-07 20:53:55 [ 5223.061801] loop0: detected capacity change from 0 to 2097152 [ 5223.072206] nvmet: adding nsid 1 to subsystem blktests-subsystem-1 [ 5223.088368] nvmet_tcp: enabling port 0 (127.0.0.1:4420) [ 5223.126086] nvmet: Created discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349. [ 5223.128453] nvme nvme1: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349 [ 5233.199447] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery" [ 5233.227718] ============================================ [ 5233.231283] WARNING: possible recursive locking detected [ 5233.234696] 7.0.0-rc3nvme+ #20 Tainted: G O N [ 5233.238434] -------------------------------------------- [ 5233.241852] kworker/u192:6/2413 is trying to acquire lock: [ 5233.245429] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 [ 5233.251438] but task is already holding lock: [ 5233.255254] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0 [ 5233.261125] other info that might help us debug this: [ 5233.265333] Possible unsafe locking scenario: [ 5233.269217] CPU0 [ 5233.270795] ---- [ 5233.272436] lock((wq_completion)nvmet-wq); [ 5233.275241] lock((wq_completion)nvmet-wq); [ 5233.278020] *** DEADLOCK *** [ 5233.281793] May be due to missing lock nesting notation [ 5233.286195] 3 locks held by kworker/u192:6/2413: [ 5233.289192] #0: ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0 [ 5233.294569] #1: ffffc9000e2a7e40 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x6e0 [ 5233.300128] #2: ffffffff82d7dc40 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 [ 5233.304290] stack backtrace: [ 5233.306520] CPU: 4 UID: 0 PID: 2413 Comm: kworker/u192:6 Tainted: G O N 7.0.0-rc3nvme+ #20 PREEMPT(full) [ 5233.306524] Tainted: [O]=OOT_MODULE, [N]=TEST [ 5233.306525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 5233.306527] Workqueue: nvmet-wq nvmet_tcp_release_queue_work [nvmet_tcp] [ 5233.306532] Call Trace: [ 5233.306534] <TASK> [ 5233.306536] dump_stack_lvl+0x73/0xb0 [ 5233.306552] print_deadlock_bug+0x225/0x2f0 [ 5233.306556] __lock_acquire+0x13f0/0x2290 [ 5233.306563] lock_acquire+0xd0/0x300 [ 5233.306565] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306571] ? __flush_work+0x20b/0x530 [ 5233.306573] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306577] touch_wq_lockdep_map+0x3b/0x90 [ 5233.306580] ? touch_wq_lockdep_map+0x26/0x90 [ 52 ---truncated--- | ||||
| CVE-2026-46303 | 1 Linux | 1 Linux Kernel | 2026-06-14 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: isofs: validate Rock Ridge CE continuation extent against volume size rock_continue() reads rs->cont_extent verbatim from the Rock Ridge CE record and passes it to sb_bread() without checking that the block number is within the mounted ISO 9660 volume. commit e595447e177b ("[PATCH] rock.c: handle corrupted directories") added cont_offset and cont_size rejection for the CE continuation but did not validate the extent block number itself. commit f54e18f1b831 ("isofs: Fix infinite looping over CE entries") later capped the CE chain length at RR_MAX_CE_ENTRIES = 32 but again left the block number unchecked. With a crafted ISO mounted via udisks2 (desktop optical auto-mount) or via CAP_SYS_ADMIN mount, rs->cont_extent can therefore point at an out-of-range block or at blocks belonging to an adjacent filesystem on the same block device. sb_bread() on an out-of-range block returns NULL cleanly via the block layer EIO path, so there is no memory-safety violation. For in-range reads of adjacent- filesystem data, the CE buffer is parsed as Rock Ridge records and only the text of SL sub-records reaches userspace through readlink(), which makes the info-leak channel narrow and difficult to exploit; still, rejecting the malformed CE outright matches the rejection shape already present in the same function for cont_offset and cont_size. Add an ISOFS_SB(sb)->s_nzones bounds check to rock_continue() next to the existing offset/size rejection, printing the same corrupted-directory-entry notice. | ||||
| CVE-2026-46299 | 1 Linux | 1 Linux Kernel | 2026-06-14 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix held lock freed on hfsplus_fill_super() hfsplus_fill_super() calls hfs_find_init() to initialize a search structure, which acquires tree->tree_lock. If the subsequent call to hfsplus_cat_build_key() fails, the function jumps to the out_put_root error label without releasing the lock. The later cleanup path then frees the tree data structure with the lock still held, triggering a held lock freed warning. Fix this by adding the missing hfs_find_exit(&fd) call before jumping to the out_put_root error label. This ensures that tree->tree_lock is properly released on the error path. The bug was originally detected on v6.13-rc1 using an experimental static analysis tool we are developing, and we have verified that the issue persists in the latest mainline kernel. The tool is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available. We confirmed the bug by runtime testing under QEMU with x86_64 defconfig, lockdep enabled, and CONFIG_HFSPLUS_FS=y. To trigger the error path, we used GDB to dynamically shrink the max_unistr_len parameter to 1 before hfsplus_asc2uni() is called. This forces hfsplus_asc2uni() to naturally return -ENAMETOOLONG, which propagates to hfsplus_cat_build_key() and exercises the faulty error path. The following warning was observed during mount: ========================= WARNING: held lock freed! 7.0.0-rc3-00016-gb4f0dd314b39 #4 Not tainted ------------------------- mount/174 is freeing memory ffff888103f92000-ffff888103f92fff, with a lock still held there! ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0 2 locks held by mount/174: #0: ffff888103f960e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.constprop.0+0x167/0xa40 #1: ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0 stack backtrace: CPU: 2 UID: 0 PID: 174 Comm: mount Not tainted 7.0.0-rc3-00016-gb4f0dd314b39 #4 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x82/0xd0 debug_check_no_locks_freed+0x13a/0x180 kfree+0x16b/0x510 ? hfsplus_fill_super+0xcb4/0x18a0 hfsplus_fill_super+0xcb4/0x18a0 ? __pfx_hfsplus_fill_super+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? bdev_open+0x65f/0xc30 ? srso_return_thunk+0x5/0x5f ? pointer+0x4ce/0xbf0 ? trace_contention_end+0x11c/0x150 ? __pfx_pointer+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? bdev_open+0x79b/0xc30 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? vsnprintf+0x6da/0x1270 ? srso_return_thunk+0x5/0x5f ? __mutex_unlock_slowpath+0x157/0x740 ? __pfx_vsnprintf+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? mark_held_locks+0x49/0x80 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? irqentry_exit+0x17b/0x5e0 ? trace_irq_disable.constprop.0+0x116/0x150 ? __pfx_hfsplus_fill_super+0x10/0x10 ? __pfx_hfsplus_fill_super+0x10/0x10 get_tree_bdev_flags+0x302/0x580 ? __pfx_get_tree_bdev_flags+0x10/0x10 ? vfs_parse_fs_qstr+0x129/0x1a0 ? __pfx_vfs_parse_fs_qstr+0x3/0x10 vfs_get_tree+0x89/0x320 fc_mount+0x10/0x1d0 path_mount+0x5c5/0x21c0 ? __pfx_path_mount+0x10/0x10 ? trace_irq_enable.constprop.0+0x116/0x150 ? trace_irq_enable.constprop.0+0x116/0x150 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? kmem_cache_free+0x307/0x540 ? user_path_at+0x51/0x60 ? __x64_sys_mount+0x212/0x280 ? srso_return_thunk+0x5/0x5f __x64_sys_mount+0x212/0x280 ? __pfx___x64_sys_mount+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? trace_irq_enable.constprop.0+0x116/0x150 ? srso_return_thunk+0x5/0x5f do_syscall_64+0x111/0x680 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ffacad55eae Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 8 RSP: 002b ---truncated--- | ||||
| CVE-2026-46289 | 1 Linux | 1 Linux Kernel | 2026-06-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: lib/scatterlist: fix length calculations in extract_kvec_to_sg Patch series "Fix bugs in extract_iter_to_sg()", v3. Fix bugs in the kvec and user variants of extract_iter_to_sg. This series is growing due to useful remarks made by sashiko.dev. The main bugs are: - The length for an sglist entry when extracting from a kvec can exceed the number of bytes in the page. This is obviously not intended. - When extracting a user buffer the sglist is temporarily used as a scratch buffer for extracted page pointers. If the sglist already contains some elements this scratch buffer could overlap with existing entries in the sglist. The series adds test cases to the kunit_iov_iter test that demonstrate all of these bugs. Additionally, there is a memory leak fix for the test itself. The bugs were orignally introduced into kernel v6.3 where the function lived in fs/netfs/iterator.c. It was later moved to lib/scatterlist.c in v6.5. Thus the actual fix is only marked for backports to v6.5+. This patch (of 5): When extracting from a kvec to a scatterlist, do not cross page boundaries. The required length was already calculated but not used as intended. Adjust the copied length if the loop runs out of sglist entries without extracting everything. While there, return immediately from extract_iter_to_sg if there are no sglist entries at all. A subsequent commit will add kunit test cases that demonstrate that the patch is necessary. | ||||
| CVE-2026-46288 | 1 Linux | 1 Linux Kernel | 2026-06-14 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: of: unittest: fix use-after-free in of_unittest_changeset() The variable 'parent' is assigned the value of 'nchangeset' earlier in the function, meaning both point to the same struct device_node. The call to of_node_put(nchangeset) can decrement the reference count to zero and free the node if there are no other holders. After that, the code still uses 'parent' to check for the presence of a property and to read a string property, leading to a use-after-free. Fix this by moving the of_node_put() call after the last access to 'parent', avoiding the UAF. | ||||
| CVE-2026-46280 | 1 Linux | 1 Linux Kernel | 2026-06-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: lib: test_hmm: evict device pages on file close to avoid use-after-free Patch series "Minor hmm_test fixes and cleanups". Two bugfixes a cleanup for the HMM kernel selftests. These were mostly reported by Zenghui Yu with special thanks to Lorenzo for analysing and pointing out the problems. This patch (of 3): When dmirror_fops_release() is called it frees the dmirror struct but doesn't migrate device private pages back to system memory first. This leaves those pages with a dangling zone_device_data pointer to the freed dmirror. If a subsequent fault occurs on those pages (eg. during coredump) the dmirror_devmem_fault() callback dereferences the stale pointer causing a kernel panic. This was reported [1] when running mm/ksft_hmm.sh on arm64, where a test failure triggered SIGABRT and the resulting coredump walked the VMAs faulting in the stale device private pages. Fix this by calling dmirror_device_evict_chunk() for each devmem chunk in dmirror_fops_release() to migrate all device private pages back to system memory before freeing the dmirror struct. The function is moved earlier in the file to avoid a forward declaration. | ||||
| CVE-2026-46277 | 1 Linux | 1 Linux Kernel | 2026-06-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/zone_device: do not touch device folio after calling ->folio_free() The contents of a device folio can immediately change after calling ->folio_free(), as the folio may be reallocated by a driver with a different order. Instead of touching the folio again to extract the pgmap, use the local stack variable when calling percpu_ref_put_many(). | ||||
| CVE-2026-46275 | 1 Linux | 1 Linux Kernel | 2026-06-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer Dereference (NPD) conditions were observed in the lifecycle management of hci_uart. The primary issue arises because the workqueues (init_ready and write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY flag is set during TTY close. If a hangup occurs before setup completes, hci_uart_tty_close() skips the teardown of these workqueues and proceeds to free the `hu` struct. When the scheduled work executes later, it blindly dereferences the freed `hu` struct. Furthermore, several data races and UAFs were identified in the teardown sequence: 1. Calling hci_uart_flush() from hci_uart_close() without effectively disabling write_work causes a race condition where both can concurrently double-free hu->tx_skb. This happens because protocol timers can concurrently invoke hci_uart_tx_wakeup() and requeue write_work. 2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF when vendor specific protocol close callbacks dereference hu->hdev. 3. In the initialization error paths, failing to take the proto_lock write lock before clearing PROTO_READY leads to races with active readers. Additionally, hci_uart_tty_receive() accesses hu->hdev outside the read lock, leading to UAFs if the initialization error path frees hdev concurrently. Fix these synchronization and lifecycle issues by: 1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first, followed immediately by a cancel_work_sync(&hu->write_work). Clearing the flag locks out concurrent protocol timers from successfully invoking hci_uart_tx_wakeup(), effectively rendering the cancellation permanent and preventing the tx_skb double-free. 2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip hu->proto->flush(). This is perfectly safe in the tty_close path because hu->proto->close() executes shortly after, which intrinsically purges all protocol SKB queues and tears down the state. 3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev) across all close and error paths to prevent vendor-level UAFs. 4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive() inside the proto_lock read-side critical section to safely synchronize with device unregistration. 5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely flush the workqueue before hci_uart_flush() is invoked via the HCI core. 6. Utilizing cancel_work_sync() instead of disable_work_sync() across all paths to prevent permanently breaking user-space retry capabilities. | ||||
| CVE-2025-55659 | 1 Gpac | 2 Gpac, Mp4box | 2026-06-14 | 6.5 Medium |
| A NULL pointer dereference in the ctts_box_write function (isomedia/box_code_base.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. | ||||
| CVE-2025-55657 | 1 Gpac | 2 Gpac, Mp4box | 2026-06-14 | 7.5 High |
| A NULL pointer dereference in the gf_odf_vvc_cfg_write_bs function (odf/descriptors.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. | ||||
| CVE-2025-55651 | 1 Gpac | 2 Gpac, Mp4box | 2026-06-14 | 5.5 Medium |
| A NULL pointer dereference in the gf_isom_get_user_data_count function (isomedia/isom_read.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. | ||||
| CVE-2025-52293 | 1 Gpac | 2 Gpac, Mp4box | 2026-06-14 | 7.5 High |
| A segmentation violaton in the gf_hevc_read_sps_bs_internal function (media_tools/av_parsers.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying crafted HEVC SPS data. | ||||
| CVE-2025-52292 | 1 Gpac | 2 Gpac, Mp4box | 2026-06-14 | 7.5 High |
| A stack buffer overflow in the filein_process function (in_file.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. | ||||
| CVE-2026-12176 | 1 Sourcecodester | 1 Cet Automated Grading System With Ai Predictive Analytics | 2026-06-13 | 4.3 Medium |
| A vulnerability has been found in SourceCodester CET Automated Grading System with AI Predictive Analytics 1.0. The impacted element is an unknown function of the file /index.php. The manipulation of the argument action leads to cross site scripting. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2026-12175 | 1 Codeastro | 1 Student Attendance Management System | 2026-06-13 | 4.7 Medium |
| A vulnerability was detected in CodeAstro Student Attendance Management System 1.0. Impacted is an unknown function of the file /attendance-php/Admin/createStudents.php. Performing a manipulation of the argument admissionNumber results in sql injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. | ||||
| CVE-2026-12174 | 1 D-link | 1 Dcs-935l | 2026-06-13 | 8.8 High |
| A security vulnerability has been detected in D-Link DCS-935L 1.10.01. This issue affects the function snprintf of the file /web/cgi-bin/greece/rhea of the component HTTP Handler. Such manipulation of the argument data leads to format string. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. | ||||
| CVE-2026-12183 | 2026-06-13 | 9.8 Critical | ||
| Nefteprodukttekhnika BUK TS-G Gas Station Automation System 2.9.1 through 2.10.2 on Linux contains an Improper Authentication vulnerability (CWE-287) in the system configuration module. The /php/ajax-login.php endpoint returns userid=1 (administrator) in response to any HTTP POST request that supplies arbitrary credentials (e.g., action=dologin&login=<any_value>&pwd=<any_value>), and subsequent privileged endpoints under /php/ajax-main.php and /modules/* do not validate a server-side session. A remote unauthenticated attacker can invoke any administrative action exposed by the configuration module, including reading and modifying user rules, fuel tank gauges, fuel dispensers, relays, cash registers, bank terminals, fuel cards, price and customer displays, cash collection, and pricing rules. | ||||
| CVE-2026-6428 | 1 Koha-community | 1 Koha | 2026-06-13 | 7.6 High |
| SQL Injection in reports/catalogue_out.pl in Koha Community Koha through 22.11.37, 23.x, 24.x before 24.11.16, 25.05.x before 25.05.11, 25.11.x before 25.11.05, 26.05.x before 26.05.01, and 26.11.x before 26.11.00 allows an authenticated staff user with the Reports module flag to read arbitrary data from the Koha application database via the Filter URL parameter when the Criteria parameter matches /branchcode/. The vulnerable sink in sub calculate concatenates the unmodified Filter request parameter directly into a LIKE clause of the auxiliary $strsth2 statement and executes it via DBI without bound parameters: my $f = @$filters[0]; $f =~ s/\*/%/g; $strsth2 .= " AND $column LIKE '$f' "; This enables error-based SQL injection (e.g., via EXTRACTVALUE) and full read access to sensitive tables including borrowers (password hashes, 2FA secrets, PII), borrower_password_recovery, api_keys, and sessions. Proof of concept (error-based, single request): GET /cgi-bin/koha/reports/catalogue_out.pl?do_it=1&output=screen&Limit=10&Criteria=branchcode&Filter=x'+AND+EXTRACTVALUE(1,CONCAT(0x7e,VERSION(),0x7c,USER(),0x7c,DATABASE(),0x7e))--+- Cookie: CGISESSID=<LIBRARIAN_SESSION> The response body contains the DBI exception leaking the MariaDB version, database user, client IP, and database name, after which arbitrary data can be paged out using LIMIT n,1 / SUBSTRING(...). The vulnerable sink was introduced in commit 6bb77ae3e4 (2008-07-09); CVE-2015-4633 patched the same class in sibling files but did not generalise the fix to reports/catalogue_out.pl. Fixed in Koha 22.11.38, 24.11.16, 25.05.11, 25.11.05, 26.05.01, and 26.11.00 by replacing the raw concatenation with a parameterised placeholder. | ||||
| CVE-2026-7256 | 1 Zyxel | 2 Wre6505, Wre6505 Firmware | 2026-06-13 | 8.8 High |
| ** UNSUPPORTED WHEN ASSIGNED ** A command injection vulnerability in the CGI program of Zyxel WRE6505 v2 firmware version V1.00(ABDV.3)C0 could allow an adjacent attacker on the LAN to execute operating system (OS) commands on a vulnerable device by sending a crafted HTTP request. | ||||