| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper handling of case sensitivity in the configuration validation component of MongoDB Server may cause the authorization subsystem to remain in a default disabled state during server startup. An unauthenticated user with network access to a deployment where this condition occurs can perform arbitrary administrative operations, resulting in full impact of data confidentiality, integrity, and availability. |
| Improper Handling of Alternate Encoding vulnerability in ash-project ash_double_entry allows an attacker to submit several distinct string spellings of the same identifier.
AshDoubleEntry.ULID renders a 128-bit ULID as 26 Crockford base-32 characters, but the first character encodes only 3 bits, so canonical values are 0 to 7. decode/1 in lib/ulid.ex masks the first character to its low 3 bits and valid?/1 accepts all 32 characters in that position, so 0..., 8..., G... and R... decode to the identical 16-byte value and resolve to the same row. When the type is exposed as a public ID over an HTTP or API boundary, an attacker-supplied ID can be spelled differently from the record it actually reads or writes, desynchronizing or bypassing string-level checks such as idempotency and deduplication keys, deny-lists, audit correlation, or signatures computed over the submitted ID.
This issue affects ash_double_entry: from 0.1.0 before 1.0.19. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: don't use simple_strtoul
Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(),
and ct_sip_parse_request() with a new sip_parse_port() helper that
validates each digit against the buffer limit, eliminating the use of
simple_strtoul() which assumes NUL-terminated strings.
The previous code dereferenced pointers without bounds checks after
sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated
skb data. A port that reaches the buffer limit without a trailing
character is also rejected as malformed.
Also get rid of all simple_strtoul() usage in conntrack, prefer a
stricter version instead. There are intentional changes:
- Bail out if number is > UINT_MAX and indicate a failure, same for
too long sequences.
While we do accept 05535 as port 5535, we will not accept e.g.
'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261,
we should restrict this to not waste cycles when presented with
malformed packets with 64k '0' characters.
- Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch
'expire=' and 'rports='; both are expected to use base-10.
- In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k
range.
- epaddr_len now returns 0 if the port is invalid, as it already does
for invalid ip addresses. This is intentional. nf_conntrack_sip
performs lots of guesswork to find the right parts of the message
to parse. Being stricter could break existing setups.
Connection tracking helpers are designed to allow traffic to
pass, not to block it.
Based on an earlier patch from Jenny Guanni Qu <qguanni@gmail.com>. |
| PocketMine-MP before 4.0.3 does not perform case-insensitive matching when removing operator entries from ops.txt. The removeOp function lowercases the supplied name but only removes an exactly matching entry, so an operator name stored with non-lowercase letters cannot be revoked using the deop command, leaving the player as an operator until the entry is removed from ops.txt manually. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate NTLMv2 response before updating session key
ksmbd_auth_ntlmv2() derives the NTLMv2 session key into
sess->sess_key before it verifies the NTLMv2 response.
ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even
when ksmbd_auth_ntlmv2() failed.
With SMB3 multichannel binding, the failed authentication operates on
an existing session and the session setup error path does not expire
binding sessions. A client can send a binding session setup with a
bad NT proof and KEY_XCH and still modify sess->sess_key before
STATUS_LOGON_FAILURE is returned.
Relevant path:
smb2_sess_setup()
-> conn->binding = true
-> ntlm_authenticate()
-> session_user()
-> ksmbd_decode_ntlmssp_auth_blob()
-> ksmbd_auth_ntlmv2()
-> calc_ntlmv2_hash()
-> hmac_md5_usingrawkey(..., sess->sess_key)
-> crypto_memneq() returns mismatch
-> KEY_XCH arc4_crypt(..., sess->sess_key, ...)
-> out_err without expiring the binding session
Derive the base session key into a local buffer and copy it to
sess->sess_key only after the proof matches. Return immediately on
authentication failure so KEY_XCH is only processed after successful
authentication. |
| HashiCorp go-slug 0.4.0 through 0.18.2 could allow a local attacker to bypass .terraformignore exclusions and cause sensitive files to be included in Terraform slug uploads due to improper handling of Unicode normalization during path matching. |
| fast-uri is a URI parser for Node.js. During parsing it runs a legacy decoding pass over the scheme component and never re-escapes the result, and serialization writes the scheme back out verbatim, unlike the host component which is re-escaped. As a result an input whose scheme carries percent-encoded slashes parses as a scheme with no authority, so the parsed host and error are both undefined, yet resolving or normalizing that same input emits a network-path reference whose authority is attacker-chosen and re-parses to that host. An application that allowlists on the parsed host, or treats a reference with no authority as safe to resolve against its base, gets the opposite of what it checked, giving an off-site redirect, server-side request forgery, or address-policy bypass. The legacy decoder also expands non-standard escape forms, widening the issue past upstream filters, and control characters in the scheme can reach the output as raw carriage return and line feed. The affected versions are 2.3.1 up to but not including 2.4.5, 3.0.0 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which reject a scheme that is not valid after decoding. Users should upgrade to a patched version. |
| fast-uri is a URI parser for Node.js. It decodes percent escapes in a hostname during parsing and then decodes the parsed hostname a second time during authority recomposition, so a single call to normalize or resolve can turn nested percent-encoded input into a different network destination such as a loopback hostname or address. For example, a doubly encoded host that spells out a loopback name decodes to that live host in one operation, which contradicts RFC 3986 section 2.4 that an implementation must not decode the same string more than once. An application that normalizes or resolves an untrusted HTTP-family URI before outbound routing, redirect validation, or a host-policy check can receive a destination different from the one the original encoded host represented, giving a server-side request forgery and host-policy bypass primitive. This is an incomplete-fix variant of CVE-2026-6322. The affected versions are 2.4.1 up to but not including 2.4.5, 3.1.2 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which normalize percent escapes once and preserve encoded percent signs. Users should upgrade to a patched version. |
| gRPC-Go is the Go language implementation of gRPC. Prior to 1.83.1, the xDS RBAC HTTP filter in internal/xds/httpfilter/rbac/rbac.go does not lowercase header matcher names in normalizeHeaderMatcher even though incoming metadata keys are lowercase. A DENY policy using a mixed-case name such as X-Role or User-Agent therefore does not match and fails open, allowing requests that should be rejected. The same case mismatch permits :Scheme or Grpc-Status to evade gRFC A41 validation and prevents Host from being rewritten to :authority. This issue is fixed in version 1.83.1. |
| Improper Handling of Case Sensitivity vulnerability in Erlang/OTP inets httpd allows a remote unauthenticated attacker to read files inside a mod_auth protected directory by requesting them with different casing, on deployments whose filesystem is case-insensitive.
mod_auth:secret_path/3 decides whether a resolved filesystem path lies inside a protected directory block by running the configured directory path through re:run/3 without the caseless option. A request for /secret/file against a directory configured as /Secret therefore does not match, so the request is treated as unprotected and no authentication challenge is issued, while the filesystem resolves the differently cased path to the same file and mod_get serves it. Deployments on case-sensitive filesystems are unaffected, because there the filesystem itself rejects the mismatched casing.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.17, from OTP 28.0 before OTP 28.5.0.6, and from OTP 29.0 before OTP 29.0.6, corresponding to inets from 5.10 before 9.3.2.7, from 9.4 before 9.6.2.3, and from 9.7 before 9.7.2. Whether OTP before OTP 17.0, corresponding to inets before 5.10, is affected is unknown. |
| xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) DOMParser and XMLSerializer module. From 0.9.0-beta.1 until 0.9.12, HTML-mode parsing through DOMParser.parseFromString() mishandles a mixed-case closing tag for the script, style, textarea, or title raw-text elements. parseHtmlSpecialContent, selected by isHTMLRawTextElement or isHTMLEscapableRawTextElement, uses a case-sensitive indexOf() and then calls substring() with a missing-close result of negative one, causing unstable parser progression and quadratic output amplification. A small untrusted text/html document can consequently consume disproportionate CPU and memory when parsed and serialized. This issue is fixed in @xmldom/xmldom version 0.9.12. |
| A host listed as a trusted proxy can send forwarding information containing a NUL byte, which crashes the login process on the following login attempt. The login process is terminated, which can cause degradation or denial of service for logins. Deployments that do not configure trusted proxies are not affected. Restrict the list of trusted proxy networks to hosts that are fully under your control. Update to non-vulnerable version. No publicly available exploits are known. |
| Improper handling of case sensitivity in FileSystem in Google Chrome prior to 152.0.7977.65 allowed a remote attacker leveraging social engineering to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Permissive Regular Expression vulnerability in ash-project ash_phoenix lets a remote client select the tenant an Ash application uses, or degrade the request, by sending a crafted Host header.
AshPhoenix.Helpers.get_subdomain/2 stripped the root domain with String.replace(host, ~r/.?#{root_host}/, ""). The root host was interpolated raw, so each . became a wildcard and any metacharacter a pattern, and the replace was global and unanchored, so a match was removed from anywhere in the string. With root_host example.com, Host: foo.exampleXcom.attacker.net returned the tenant foo.attacker.net. A metacharacter-bearing or nil root host degraded the pattern or raised on every request. The comparison was also case-sensitive, so TENANT.EXAMPLE.COM and EXAMPLE.COM slipped past the root-host allowlist. conn.host comes from the client Host header. The fix matches the root host case-insensitively and only as an exact trailing suffix.
This issue affects ash_phoenix: from 2.1.26 before 2.3.25. |
| A flaw was found in Keycloak's Authorization Services. The component responsible for matching request paths to security policies (PathMatcher) does not properly normalize URIs before comparison. By adding extra characters like a trailing slash or matrix parameters to a URL, an attacker can trick the system into applying a less restrictive security policy than intended. This allows an authenticated user to access administrative or restricted areas they should not have permission to see. |
| Improper handling of case sensitivity (CWE-178) in the identity zone authorization check in the Identity Zone Endpoint in Cloud Foundry UAA allows a remote authenticated attacker holding only the zones.write authority to bypass the intended restriction that this authority does not grant access to the privileged uaa (system) identity zone, by referring to the zone identifier in a non-lowercase form (e.g. UAA) in the request path and body. The authorization layer performs a case-sensitive comparison against the system zone identifier, while the underlying MySQL persistence layer resolves identifiers case-insensitively under its default collation, so the request is authorized incorrectly and is then resolved against the real system zone record. This allows the attacker to overwrite the system zone's JWT signing key with attacker-controlled key material, forge JWTs claiming the admin client and administrator scopes, and fully compromise UAA and any Cloud Foundry deployment that trusts it. This issue only affects UAA deployments backed by MySQL using its default collation; PostgreSQL and HSQLDB backends are not affected. |
| A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted Online Certificate Status Protocol (OCSP) response during a TLS handshake. Due to a logic error in how gnutls processes multi-record OCSP responses, a client with OCSP verification enabled may incorrectly accept a revoked server certificate, potentially leading to a compromise of trust. |
| A flaw was found in WildFly Elytron. Password hashing and verification normalize input with Unicode NFKC, which can collapse fullwidth characters to ASCII equivalents. A remote attacker can more easily guess affected passwords by using an ASCII-only dictionary against accounts whose passwords were intended to include those non-ASCII characters, leading to unauthorized access. |
| Grav is a file-based Web platform. Prior to 2.0.4, the Grav .htaccess and webserver-configs/htaccess.txt security rules omit the Apache [NC] flag and therefore compare sensitive directory and file-extension patterns case-sensitively. On a case-insensitive filesystem, an unauthenticated requester can use uppercase directory or extension variants to bypass the rules and retrieve files under user/accounts or user/config, including password hashes and security configuration. This issue is fixed in version 2.0.4. |
| Mailpit is an email testing tool and API for developers. From 1.29.0 until 1.30.6, Mailpit's server/server.go origin middleware checks the raw RequestURI for the /api/ prefix while Go's ServeMux routes using the percent-decoded URL path, and server/websockets/client.go configures websocket.Upgrader.CheckOrigin to return true. A malicious website can request /%61pi/events, skip corsOriginAccessControl(), reach the /api/events WebSocket handler, and receive live message IDs, Message-Id values, sender and recipient fields, subjects, tags, and body snippets from an unauthenticated default Mailpit instance after the user visits the site. This is a regression of the earlier WebSocket origin protection and does not affect deployments protected by --ui-auth-file. This issue is fixed in version 1.30.6. |
