| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| HCL DRYiCE Optibot Reset Station is impacted by a missing Strict Transport Security Header. This could allow an attacker to intercept or manipulate data during redirection. |
| A vulnerability was found in Satellite. When running a remote execution job on a host, the host's SSH key is not being checked. When the key changes, the Satellite still connects it because it uses "-o StrictHostKeyChecking=no". This flaw can lead to a man-in-the-middle attack (MITM), denial of service, leaking of secrets the remote execution job contains, or other issues that may arise from the attacker's ability to forge an SSH key. This issue does not directly allow unauthorized remote execution on the Satellite, although it can leak secrets that may lead to it. |
| A vulnerability was found in Netis WF-2404 1.1.124EN. It has been rated as problematic. This issue affects some unknown processing of the file /еtc/passwd. The manipulation leads to use of weak hash. It is possible to launch the attack on the physical device. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| VyOS 1.3 through 1.5 (fixed in 1.4.2) or any Debian-based system using dropbear in combination with live-build has the same Dropbear private host keys across different installations. Thus, an attacker can conduct active man-in-the-middle attacks against SSH connections if Dropbear is enabled as the SSH daemon. I n VyOS, this is not the default configuration for the system SSH daemon, but is for the console service. To mitigate this, one can run "rm -f /etc/dropbear/*key*" and/or "rm -f /etc/dropbear-initramfs/*key*" and then dropbearkey -t rsa -s 4096 -f /etc/dropbear_rsa_host_key and reload the service or reboot the system before using Dropbear as the SSH daemon (this clears out all keys mistakenly built into the release image) or update to the latest version of VyOS 1.4 or 1.5. Note that this vulnerability is not unique to VyOS and may appear in any Debian-based Linux distribution that uses Dropbear in combination with live-build, which has a safeguard against this behavior in OpenSSH but no equivalent one for Dropbear. |
| sftpgo is a full-featured and highly configurable event-driven file transfer solution. Server protocols: SFTP, HTTP/S, FTP/S, WebDAV. The OpenID Connect implementation allows authenticated users to brute force session cookies and thereby gain access to other users' data, since the cookies are generated predictably using the xid library and are therefore unique but not cryptographically secure. This issue was fixed in version v2.6.4, where cookies are opaque and cryptographically secure strings. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| free-one-api allows users to access large language model reverse engineering libraries through the standard OpenAI API format. In versions up to and including 1.0.1, MD5 is used to hash passwords before sending them to the backend. MD5 is a cryptographically broken hashing algorithm and is no longer considered secure for password storage or transmission. It is vulnerable to collision attacks and can be easily cracked using modern hardware, exposing user credentials to potential compromise. As of time of publication, a replacement for MD5 has not been committed to the free-one-api GitHub repository. |
| Emissary is a P2P based data-driven workflow engine. The ChecksumCalculator class within allows for hashing and checksum generation, but it includes or defaults to algorithms that are no longer recommended for secure cryptographic use cases (e.g., SHA-1, CRC32, and SSDEEP). These algorithms, while possibly valid for certain non-security-critical tasks, can expose users to security risks if used in scenarios where strong cryptographic guarantees are required. This issue is fixed in 8.24.0. |
| The NXP Data Co-Processor (DCP) is a built-in hardware module for specific NXP SoCs¹ that implements a dedicated AES cryptographic engine for encryption/decryption operations. The dcp_tool reference implementation included in the repository selected the test key, regardless of its `-t` argument. This issue has been patched in commit 26a7. |
| Keysight Ixia Vision has an issue with hardcoded cryptographic material
which may allow an attacker to intercept or decrypt payloads sent to the
device via API calls or user authentication if the end user does not
replace the TLS certificate that shipped with the device. Remediation is
available in Version 6.9.1, released on September 23, 2025. |
| Besu Native contains scripts and tooling that is used to build and package the native libraries used by the Ethereum client Hyperledger Besu. Besu 24.7.1 through 25.2.2, corresponding to besu-native versions 0.9.0 through 1.2.1, have a potential consensus bug for the precompiles ALTBN128_ADD (0x06), ALTBN128_MUL (0x07), and ALTBN128_PAIRING (0x08). These precompiles were reimplemented in besu-native using gnark-crypto's bn254 implementation, as the former implementation used a library which was no longer maintained and not sufficiently performant. The new gnark implementation was initially added in version 0.9.0 of besu-native but was not utilized by Besu until version 0.9.2 in Besu 24.7.1. The issue is that there are EC points which may be crafted which are in the correct subgroup but are not on the curve and the besu-native gnark implementation was relying on subgroup checks to perform point-on-curve checks as well. The version of gnark-crypto used at the time did not do this check when performing subgroup checks. The result is that it was possible for Besu to give an incorrect result and fall out of consensus when executing one of these precompiles against a specially crafted input point. Additionally, homogenous Besu-only networks can potentially enshrine invalid state which would be incorrect and difficult to process with patched versions of besu which handle these calls correctly. The underlying defect has been patched in besu-native release 1.3.0. The fixed version of Besu is version 25.3.0. As a workaround for versions of Besu with the problem, the native precompile for altbn128 may be disabled in favor of the pure-java implementation. The pure java implementation is significantly slower, but does not have this consensus issue. |
| Inadequate encryption strength issue exists in SS1 Ver.16.0.0.10 and earlier (Media version:16.0.0a and earlier). If this vulnerability is exploited, a function that requires authentication may be accessed by a remote unauthenticated attacker. |
| The server supports at least one cipher suite which is on the NCSC-NL list of cipher suites to be phased out, increasing the risk of cryptographic weaknesses. |
| The device is observed to accept deprecated TLS protocols, increasing the risk of cryptographic weaknesses. |
| CGGMP24 is a state-of-art ECDSA TSS protocol that supports 1-round signing (requires 3 preprocessing rounds), identifiable abort, and a key refresh protocol. In versions 0.6.3 and prior of cggmp21 and version 0.7.0-alpha.1 of cggmp24, presignatures can be used in the way that significantly reduces security. cggmp24 version 0.7.0-alpha.2 release contains API changes that make it impossible to use presignatures in contexts in which it reduces security. |
| Polkadot Frontier is an Ethereum and EVM compatibility layer for Polkadot and Substrate. In versions prior to commit 36f70d1, the Curve25519Add and Curve25519ScalarMul precompiles incorrectly handle invalid Ristretto point representations. Instead of returning an error, they silently treat invalid input bytes as the Ristretto identity element, leading to potentially incorrect cryptographic results. This is fixed in commit 36f70d1. |
| Missing cryptographic key commitment in the Amazon S3 Encryption Client for Go may allow a user with write access to the S3 bucket to introduce a new EDK that decrypts to different plaintext when the encrypted data key is stored in an "instruction file" instead of S3's metadata record.
To mitigate this issue, upgrade Amazon S3 Encryption Client for Go to version 4.0 or later. |
| Missing cryptographic key commitment in the Amazon S3 Encryption Client for Java may allow a user with write access to the S3 bucket to introduce a new EDK that decrypts to different plaintext when the encrypted data key is stored in an "instruction file" instead of S3's metadata record.
To mitigate this issue, upgrade Amazon S3 Encryption Client for Java to version 4.0.0 or later. |
| Missing cryptographic key commitment in the AWS SDK for Ruby may allow a user with write access to the S3 bucket to introduce a new EDK that decrypts to different plaintext when the encrypted data key is stored in an "instruction file" instead of S3's metadata record.
To mitigate this issue, upgrade AWS SDK for Ruby to version 1.208.0 or later. |
| Missing cryptographic key commitment in the Amazon S3 Encryption Client for .NET may allow a user with write access to the S3 bucket to introduce a new EDK that decrypts to different plaintext when the encrypted data key is stored in an "instruction file" instead of S3's metadata record.
To mitigate this issue, upgrade Amazon S3 Encryption Client for .NET to version 3.2.0 or later. |
| A weakness has been identified in DJI Mavic Spark, Mavic Air and Mavic Mini 01.00.0500. Affected is an unknown function of the component Telemetry Channel. Executing manipulation can lead to use of hard-coded cryptographic key
. The attacker needs to be present on the local network. A high complexity level is associated with this attack. The exploitability is told to be difficult. The exploit has been made available to the public and could be exploited. This vulnerability only affects products that are no longer supported by the maintainer. |
