| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: cluster: don't sleep while holding o2hb_live_lock in o2hb_region_pin()
Patch series "ocfs2: cluster: o2hb_region_pin() fixes", v2.
This series fixes three related issues in o2hb_region_pin(), all are from
the original implementation in commit: 58a3158a5d17 ("ocfs2/cluster:
Pin/unpin o2hb regions"):
1) It is called with o2hb_live_lock (a spinlock) held, but the
underlying configfs_depend_item() sleeps (takes inode rwsem and
pins the filesystem). This triggers BUG under
CONFIG_DEBUG_ATOMIC_SLEEP.
2) When called from the configfs drop_item callback, it creates a
lock order inversion: parent inode_lock -> configfs root
inode_lock, which can deadlock against subsystem unregistration
paths taking root -> parent.
3) If pinning fails partway through o2hb_region_inc_user(), the
o2hb_dependent_users counter is leaked and partially-pinned
regions are never released, leaving heartbeat regions
unprotected on subsequent mounts.
Patch 1 reworks o2hb_region_pin() to drop o2hb_live_lock across each
sleeping configfs_depend_item() call, using a config_item reference to
keep the region alive while unlocked.
Patch 2 adds a from_callback parameter to select
configfs_depend_item_unlocked() when called from configfs context,
avoiding the inode_lock nesting.
Patch 3 fixes the error path in o2hb_region_inc_user() to unpin and
decrement the counter on failure.
This patch (of 3):
o2hb_region_pin() is always called with the o2hb_live_lock spinlock held
(from o2hb_region_inc_user() and o2hb_heartbeat_group_drop_item()), but it
calls o2nm_depend_item() -> configfs_depend_item(), which sleeps: it pins
the configfs filesystem and takes the configfs root inode rwsem. Under
CONFIG_DEBUG_ATOMIC_SLEEP this triggers:
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c
in_atomic(): 1, ... name: mount.ocfs2
down_write
configfs_depend_item
o2hb_region_pin
o2hb_region_inc_user
o2hb_register_callback
dlm_register_domain_handlers
...
ocfs2_dlm_init
ocfs2_mount_volume
ocfs2_fill_super
Rework o2hb_region_pin() to pin one region at a time with the lock dropped
across the sleeping call: under o2hb_live_lock find the next eligible
region and take a config_item reference to keep it alive, drop the lock,
call o2nm_depend_item(), then retake the lock and record the pin. The
config_item_put() is done with the lock released as well, since
o2hb_region_release() also acquires o2hb_live_lock and can sleep. The
region list may change while unlocked, so the scan restarts from the top
after each pin. Local heartbeat still pins only the matching region;
global heartbeat pins all eligible regions.
The unpin path is unaffected: configfs_undepend_item() only takes a
spinlock and does not sleep. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mrp: reject zero test interval to avoid OOM panic
br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied
interval value from netlink without validation. When interval is 0,
usecs_to_jiffies(0) yields 0, causing the delayed work
(br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule
itself with zero delay. This creates a tight loop on system_percpu_wq
that allocates and transmits MRP test frames at maximum rate, exhausting
all system memory and causing a kernel panic via OOM deadlock.
The same zero-interval issue applies to br_mrp_start_in_test_parse()
for interconnect test frames.
Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both
IFLA_BRIDGE_MRP_START_TEST_INTERVAL and
IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the
netlink attribute parsing layer before the value ever reaches the
workqueue scheduling code. This is consistent with how other bridge
subsystems (br_fdb, br_mst) enforce range constraints on netlink
attributes. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix WARNING "do not call blocking ops when !TASK_RUNNING"
wait_event_timeout() will set the state of the current
task to TASK_UNINTERRUPTIBLE, before doing the condition check. This
means that ksmbd_durable_scavenger_alive() will try to acquire the mutex
while already in a sleeping state. The scheduler warns us by giving
the following warning:
do not call blocking ops when !TASK_RUNNING; state=2 set at
[<0000000061515a6f>] prepare_to_wait_event+0x9f/0x6c0
WARNING: CPU: 2 PID: 4147 at kernel/sched/core.c:10099 __might_sleep+0x12f/0x160
mutex lock is not needed in ksmbd_durable_scavenger_alive(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: fnic: Use GFP_ATOMIC for VLAN alloc under spinlock
fnic_fcoe_process_vlan_resp() allocates a VLAN descriptor with
kzalloc_obj() (default GFP_KERNEL) while holding vlans_lock via
spin_lock_irqsave(). GFP_KERNEL may sleep, which is not allowed in this
atomic context and can trigger a sleeping-from-invalid-context warning
or deadlock.
Pass GFP_ATOMIC so the allocation is safe under the IRQ-safe spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO
rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from
the probe path, which may sleep and is not timing-critical. When the
reset GPIO is provided by a sleeping controller such as an I2C I/O
expander, gpiod_set_value() warns:
WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61
Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT)
Workqueue: events_unbound deferred_probe_work_func
pc : gpiod_set_value+0x44/0x80
lr : rtl83xx_probe+0x1d8/0x3a0
Call trace:
gpiod_set_value+0x44/0x80 (P)
rtl83xx_probe+0x1d8/0x3a0
realtek_mdio_probe+0x24/0xa0
mdio_probe+0x38/0x78
really_probe+0xc4/0x3e0
__driver_probe_device+0x15c/0x1b8
driver_probe_device+0xb4/0x120
__device_attach_driver+0xb8/0x1a0
bus_for_each_drv+0x88/0xf0
__device_attach+0xa0/0x1d8
device_initial_probe+0x54/0x68
bus_probe_device+0x38/0xa0
deferred_probe_work_func+0xb8/0x120
process_one_work+0x184/0x4e8
worker_thread+0x188/0x308
kthread+0x130/0x150
ret_from_fork+0x10/0x20
Switch both helpers to gpiod_set_value_cansleep() so such a reset GPIO can
be used without triggering the warning.
The reset GPIO has been driven with the non-sleeping gpiod_set_value()
since the driver was added in v4.19. The call has since been refactored
across several files - from realtek-smi.c / realtek-mdio.c into the common
rtl83xx.c module and then into the rtl83xx_reset_assert() and
rtl83xx_reset_deassert() helpers (both in v6.9). This patch therefore
applies as-is only to kernels that carry those helpers (v6.9+); older
stable kernels need the same gpiod_set_value_cansleep() conversion at the
corresponding open-coded call sites. |
| An issue was discovered in OpenStack Nova before 30.2.2, 31 before 31.2.1, and 32 before 32.1.1. By writing a malicious QCOW header to a root or ephemeral disk and then triggering a resize, a user may convince Nova's Flat image backend to call qemu-img without a format restriction, resulting in an unsafe image resize operation that could destroy data on the host system. Only compute nodes using the Flat image backend (usually configured with use_cow_images=False) are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix missing barrier when checking io-uring readiness
fuse_block_alloc() reads fch->initialized and then fch->io_uring.
fch->io_uring is set before fch->initialized, ordered by the smp_wmb()
in fuse_chan_set_intialized(), but fuse_block_alloc() has no matching
read barrier between the two loads.
This may lead a CPU to observe fch->initialized=1 but fch->io_uring=0,
and skip the check that blocks request allocation until the io-uring
queues are ready. This can reintroduce the lock-order inversion deadlock
that commit 3393ff964e0f prevents.
Add an smp_rmb() barrier to pair with the smp_wmb() in
fuse_chan_set_initialized() to prevent this. |
| Tor before 0.4.9.12 interprets the CC_RESPONSE extension even when CC_REQUEST was not sent, which allows remote attackers to cause a denial of service (crash) because of corrupted congestion-control state. This is TROVE-2026-032. |
| The Bluetooth Classic (BR/EDR) L2CAP receive handler bt_l2cap_br_recv() in subsys/bluetooth/host/classic/l2cap_br.c dispatched inbound data PDUs based only on the destination channel ID, without checking that the target channel had reached the BT_L2CAP_CONNECTED state. A dynamic channel is assigned its RX CID and added to the connection's channel list while still in BT_L2CAP_CONNECTING (and later BT_L2CAP_CONFIG) — before configuration completes and, for PSMs that require security, before the peer is authenticated (l2cap_br_conn_req()).
Because the channel is already findable by bt_l2cap_br_lookup_rx_cid() during this window, a remote peer within radio range can send a data PDU addressed to that CID and have it processed on a not-yet-established channel. The dispatch keys off channel fields (BR_CHAN(chan)->rx.mode, rx.mps) that are only initialized during configuration by l2cap_br_conf(); since channel objects are pooled and bt_l2cap_br_chan_del() does not reset rx.mode or the reassembly buffer _sdu, a reused channel can carry stale state into the CONNECTING window and route the frame into the retransmission/flow-control path (bt_l2cap_br_ret_fc_recv()) with stale parameters and a possibly stale _sdu pointer.
The impact is delivery of attacker data to upper-layer protocol handlers on a half-open (and possibly unauthenticated) channel, plus operation on stale or partially initialized channel state on reused channel objects — leading to channel/link teardown (denial of service) and, in the stale-_sdu case, a dangling-pointer condition. The fix adds an explicit BR_CHAN(chan)->state < BT_L2CAP_CONNECTED guard that drops any data received before the channel is fully connected. |
| PocketMine-MP versions before 5.39.2 fail to validate entity despawn state when processing attack packets from clients. Attackers can exploit a race condition by attacking a disconnecting player to trigger multiple death handlers, causing inventory items and experience to drop multiple times for duplication. |
| Improper initialization in Views in Google Chrome on on Windows prior to 153.0.8010.36 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| x86 PV guests can free memory pages while still keeping a stale TLB entry
pointing to them. A TLB flush is only issued by Xen (if needed) when the
page is re-used. Since it's possible for the page to be scrubbed ahead of
the TLB flush, there's a window where a PV guest can modify an already
scrubbed page. |
| Improper resource exposure in CacheStorage in Google Chrome prior to 152.0.7977.82 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
| In xinclude in libxml2 before 2.15.4, xmlXIncludeProcess and xmlXIncludeProcessTree do not propagate parseFlags. This has security relevance for, for example, the XML_PARSE_NONET flag, if (without it) a custom resource loader accesses the internet and triggers XML external entity injection, SSRF, or a denial of service (e.g., for an attacker-controlled internet resource that is intentionally slow). |
| In the Linux kernel, the following vulnerability has been resolved:
block: mark GFP_NOIO around sysfs ->store()
sysfs ->store is called with queue freezed, meantime we have several
->store() callbacks(update_nr_requests, wbt, scheduler) to allocate
memory with GFP_KERNEL which may run into direct reclaim code path,
then potential deadlock can be caused.
Fix the issue by marking NOIO around sysfs ->store() |
| In specific scenarios involving multiple clients with different DNS resolver configurations, Reactor Netty may incorrectly reuse a previously configured DNS resolver.
Reactor Netty 1.3.0 - 1.3.6
Reactor Netty 1.1.0 - 1.2.18
Reactor Netty 1.0.52 and earlier |
| In the Linux kernel, the following vulnerability has been resolved:
HID: rapoo: fix missing hid_is_usb() check
to_usb_interface() can only be used on a hid_device whose parent is really
USB; uhid can create devices that identify as being on BUS_USB, but don't
actually have a USB parent.
Fix the use of to_usb_interface() without a hid_is_usb() check.
Add a dependency on USB_HID for hid_is_usb(), as other HID drivers do; the
alternative would be to provide a simple stub implementation on !USB_HID
builds.
I have verified that it is currently possible to trigger a kernel splat due
to this bug in an ASAN build, and that this commit fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix missing metadata reservation for large xattrs
[BUG]
lsetxattr() panics the kernel when setting a large xattr value on a
fragmented filesystem where the file already has an external xattr
block.
[CAUSE]
ocfs2_calc_xattr_set_need() never reserves metadata blocks for a new
xattr value's extent tree when the file already has an external xattr
block. The not_found path leaves meta_add at zero, so meta_ac is NULL
when ocfs2_xattr_extend_allocation() runs.
A new value root has room for a single extent record. On a fragmented
filesystem, the allocator cannot satisfy the xattr value in one
contiguous run, so each non-contiguous run requires its own extent
record. When the value root's extent list is full and meta_ac is NULL,
ocfs2_add_clusters_in_btree() returns RESTART_META, and
ocfs2_xattr_extend_allocation() hits BUG_ON(why == RESTART_META).
[FIX]
The case where no xattr block exists yet already calls
ocfs2_extend_meta_needed(&def_xv.xv.xr_list) to reserve value tree
metadata. Add the same reservation to the case where an xattr block
already exists, making the two cases consistent.
Replace the BUG_ON with a -ENOSPC return so that if RESTART_META is
returned despite the reservation, the error propagates to userspace
instead of panicking the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: avoid lock inversion in nat keepalive work
nat_keepalive_work() walks the state table while xfrm_state_walk()
holds net->xfrm.xfrm_state_lock. Its callback then acquires x->lock,
which conflicts with the delete path taking the same locks in reverse
order via xfrm_state_delete() and __xfrm_state_delete(). This creates
an AB-BA deadlock that is reported by lockdep when a NAT keepalive
worker races with SA deletion.
Fix this by splitting the keepalive walk into two phases. First,
collect the candidate states while the walk holds xfrm_state_lock and
take a reference on each state. Then, after the walk completes, process
each collected state and acquire x->lock without nesting it under
xfrm_state_lock. |
