| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Zero queue and stack outputs on lock failure
Queue and stack pop/peek helpers accept an uninitialized output buffer
because the verifier expects the helper to initialize it. The empty-map
error path clears the buffer, but a failed lock acquisition returns
-EBUSY without writing it.
Clear the output before returning -EBUSY so BPF programs cannot observe
uninitialized stack contents after a failed helper call. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow interpreter fallback for arena-related insns
Since the interpreter does not support the arena-related insns,
interpreter fallback should not be allowed for these insns in
core.c::__bpf_prog_select_runtime().
Currently, when the interpreter executes the arena ST/LDX/STX insns,
it would hit the BUG_ON() in ___bpf_prog_run() at run time.
[ 2.579196] BPF interpreter: unknown opcode a2 (imm: 0x0)
[ 2.579998] ------------[ cut here ]------------
[ 2.580652] kernel BUG at kernel/bpf/core.c:2349!
[ 2.581314] Oops: invalid opcode: 0000 [#1] SMP PTI
Set jit_required as true when arena map is used in the prog to disallow
interpreter fallback for arena-related insns. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: ad525x_dpot: use driver core groups for sysfs files
ad_dpot_probe() creates per-RDAC sysfs files manually and then
optionally creates the command sysfs group. This leaves probe responsible
for rolling back partial sysfs state and makes remove responsible for
matching every file that probe created.
Move the device attributes into driver core dev_groups for the I2C and
SPI drivers and use an is_visible() callback to expose only the
attributes supported by the probed device. With this shape, the driver
core creates the sysfs files only after probe succeeds and removes them
before the remove callback frees the driver data. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Avoid stack over-read in debug output helpers
host1x_debug_output() and host1x_debug_cont() used vsnprintf(), which
returns the length the formatted string would have reached with an
unbounded buffer. That return value was passed straight to o->fn as
the number of bytes to emit.
This could cause a read past end of the output buffer if a call to
host1x_debug_* produced a string longer than 256 bytes. This only
affected the debugfs files as the printk debug sink ignores the
number of bytes. In practice, this is very unlikely to occur.
Fix by switching to vscnprintf(), which returns the number of bytes
actually written. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs
The loop counter 'count' was declared as u8 while num_pc is u32.
If firmware advertises more than 255 PC entries the counter wraps
back to zero and the loop never terminates potentially causing an
infinite loop or reading past the allocated pc_data array.
Change the declaration to u32 to match num_pc. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: tc358767: clamp the reported AUX read size to the request
tc_aux_transfer() clamps an AUX read to the payload limit:
size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
After the transfer it replaces size with the byte count the controller
reports in AUX_BYTES:
if (size)
size = FIELD_GET(AUX_BYTES, auxstatus);
AUX_BYTES is GENMASK(15, 8), so it can be up to 255. Nothing clamps it
back to the request. tc_aux_read_data() reads that many bytes into the
16-byte auxrdata stack buffer, then copies them into the caller buffer. A
reported count of 255 makes the read run to 256 bytes and overruns both.
The controller should never report more than it was asked to transfer, so
this is defense in depth rather than a live hole. The reported count is
only lightly trusted, and the check is cheap. Clamp it back to the request,
the same way ti-sn65dsi86 does in commit aca58eac52b8 ("drm/bridge:
ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer"). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Reject Set Features output buffer smaller than the header
cxlctl_set_feature() sizes its output buffer from the user's
fwctl_rpc.out_len but never checks it is large enough to hold even the
fwctl_rpc_cxl_out header. With out_len == 0 , kvzalloc() returns
ZERO_SIZE_PTR, which passes the !rpc_out check, the subsequent
rpc_out->size = 0 then writes through the poison pointer.
Reject requests whose output buffer can't hold the response header,
before allocating. The Set Feature reply carries no payload, so the
header is all that is required. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux
bpf_get_btf_vmlinux() lazily parses the vmlinux BTF under the
bpf_verifier_lock, but publishes the result through a plain store
and re-checks it through a plain lockless load. Nothing orders
the stores initializing the struct btf inside btf_parse_vmlinux()
against the store publishing the pointer: On a weakly ordered
arch, a concurrent first-time caller taking the lockless fast
path could in principle observe the pointer before the parsed
contents are visible. The mutex_unlock() does not help such a
reader given it only synchronizes with a later acquisition of the
same lock. Thus, publish the pointer with smp_store_release()
and read it on the fast path with smp_load_acquire().
Acquire semantics are needed rather than a dependency-ordered
READ_ONCE(): btf_parse_vmlinux() also populates globals outside
the returned object (e.g. bpf_ctx_convert.t). An address
dependency would only order accesses performed through the
pointer and not cover other globals. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: dw_dp: Release core resources
Core resources such as the DisplayPort AUX channel get initialized and
registered during dw_dp_bind(), but are never unregistered, which may
lead to memory leaks and/or use-after-free:
[ 224.661371] BUG: KASAN: slab-use-after-free in device_is_dependent+0xe0/0x2b0
[ 224.662015] Read of size 8 at addr ffff00011aee8550 by task modprobe/658
[ 224.662612]
[ 224.662752] CPU: 7 UID: 0 PID: 658 Comm: modprobe Not tainted 7.0.0-rc2-next-20260305 #14 PREEMPT
[ 224.662759] Hardware name: Radxa ROCK 5B (DT)
[ 224.662762] Call trace:
[ 224.662764] show_stack+0x20/0x38 (C)
[ 224.662772] dump_stack_lvl+0x6c/0x98
[ 224.662777] print_report+0x160/0x4b8
[ 224.662783] kasan_report+0xb4/0xe0
[ 224.662790] __asan_report_load8_noabort+0x20/0x30
[ 224.662796] device_is_dependent+0xe0/0x2b0
[ 224.662802] device_is_dependent+0x108/0x2b0
[ 224.662808] device_link_add+0x1f8/0x10b0
[ 224.662813] devm_of_phy_get_by_index+0x120/0x200
[ 224.662819] dw_dp_bind+0x34c/0xb10 [dw_dp]
[ 224.662830] dw_dp_rockchip_bind+0x194/0x250 [rockchipdrm]
[ 224.662864] component_bind_all+0x3a8/0x720
[ 224.662869] rockchip_drm_bind+0x120/0x390 [rockchipdrm]
[ 224.662899] try_to_bring_up_aggregate_device+0x76c/0x838
[ 224.662904] component_master_add_with_match+0x1f4/0x230
[ 224.662909] rockchip_drm_platform_probe+0x420/0x538 [rockchipdrm]
[ 224.662939] platform_probe+0xe8/0x168
[ 224.662945] really_probe+0x340/0x828
[ 224.662950] __driver_probe_device+0x2e0/0x350
[ 224.662954] driver_probe_device+0x80/0x140
[ 224.662959] __driver_attach+0x398/0x460
[ 224.662964] bus_for_each_dev+0xe0/0x198
[ 224.662968] driver_attach+0x50/0x68
[ 224.662972] bus_add_driver+0x2a0/0x4c0
[ 224.662977] driver_register+0x294/0x360
[ 224.662982] __platform_driver_register+0x7c/0x98
[ 224.662987] rockchip_drm_init+0xc4/0xff8 [rockchipdrm]
Since a previous commit exported dw_dp_unbind() function in DW DP core
library to take care of the necessary cleanup, use this in the
component's unbind() callback, as well as in its bind() error path. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak
rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to
NULL before any pending streaming teardown has run. When user space
later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming()
which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases
each coherent buffer with:
usb_free_coherent(dev->udev, dev->buf_size,
dev->buf_list[dev->buf_num],
dev->dma_addr[dev->buf_num]);
usb_free_coherent() returns immediately when its dev argument is NULL,
so every DMA stream buffer that was live at disconnect is silently
leaked. The URBs allocated in rtl2832_sdr_alloc_urbs() outlive the
device for the same reason.
The rtl2832_sdr driver uses vb2_fop_release() in its file_operations,
so replace video_unregister_device(&dev->vdev) with
vb2_video_unregister_device(&dev->vdev) and move it before clearing
dev->udev. vb2_video_unregister_device() releases the vb2 queue, which
synchronously runs rtl2832_sdr_stop_streaming() if streaming is active,
so URBs and coherent DMA stream buffers are freed while dev->udev is
still valid.
vb2_video_unregister_device() locks vdev->queue->lock (vb_queue_lock)
internally, and stop_streaming() locks v4l2_lock, so the previous outer
mutex_lock(&dev->vb_queue_lock) / mutex_lock(&dev->v4l2_lock) pair
around the unregister sequence would self-deadlock and has been removed.
A short v4l2_lock critical section around dev->udev = NULL remains so
any ioctl path that still holds the file descriptor sees coherent state.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/ |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix use-after-free in find_pos_and_ways() error path
The error path releases its reference to a switch decoder before
logging an error that includes the decoder name. If the released
reference is the last one, the decoder can be freed before the error
message accesses its name.
Drop the reference after the error is reported. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Roll back partial protocol table registration
scmi_protocol_table_register() can leave earlier requests registered when
a later entry in the same ID table fails. Each request retains a pointer
to the driver's ID table, so a failed module load can leave a dangling
pointer after the module storage is released.
Unrequest only the successfully registered prefix, in reverse order,
before returning the failure. Leave the failed entry and the remaining
entries untouched because matching requests can be owned by another
driver. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: avoid buffer overreads in WMI event handlers
The following WMI event handlers currently read from the event buffer
without first verifying that the message was large enough to hold the
expected event:
ath6kl_wmi_scan_complete_rx()
ath6kl_wmi_addba_req_event_rx()
ath6kl_wmi_delba_req_event_rx()
Add length checks to prevent overread. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate readdir offset before accessing dirent
A corrupted directory can trigger the following KASAN report when
ext4_readdir() resumes from an invalid position:
BUG: KASAN: use-after-free in __ext4_check_dir_entry+0x5ef/0x820
Read of size 2 at addr ffff88810a646000 by task repro_linear/509
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x630
kasan_report+0xce/0x100
__ext4_check_dir_entry+0x5ef/0x820
ext4_readdir+0xcde/0x2b70
iterate_dir+0x1a1/0x520
__x64_sys_getdents64+0x12b/0x220
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
KASAN reports use-after-free because the out-of-bounds access lands in an
adjacent freed page. The directory buffer itself is still referenced.
ext4_dir_llseek() invalidates the directory cookie so that ext4_readdir()
rescans directory entries from the start of the block. The rescan checks
only the lower bound of rec_len before advancing. A corrupted rec_len can
therefore place the offset where the block has insufficient space for a
complete directory entry. The rescan itself may dereference that truncated
entry, or the main loop may pass it to __ext4_check_dir_entry(). The latter
reads de->rec_len before validating the range. For example:
block offset 0 4092 4096
|---- de1.rec_len = 4092 -----|----|
de2.inode
| de2.rec_len
^ OOB, reported as UAF
de2 starts at offset 4092 in this 4 KiB block. Its four-byte inode fits in
the block, but its rec_len starts at offset 4096 and crosses the boundary.
The minimum safe length is inode-dependent. Encrypted and casefolded
directory entries need eight additional hash bytes, while a valid metadata
checksum tail is only 12 bytes.
Cache the metadata checksum feature state and derive the minimum directory
entry length from the on-disk format. Use it to bound both the rescan and
the offset passed to the main loop. Report an offset in a truncated block
tail and skip the remainder of the block, while continuing to accept an
offset exactly at the block boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix undefined behavior in devid_write debugfs function
When for_each_pci_segment() loop completes without finding a matching
segment, the pci_seg pointer is not NULL but points to an invalid memory
location (the list head). Accessing pci_seg->id after the loop causes
undefined behavior.
Fix this by handling the successful case inside the loop and returning
-EINVAL after the loop if no matching segment is found. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: validate dynamic counter attribute length
RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is a nested attribute whose children are
consumed directly with nla_get_u32(). The top-level policy validates only
the container, so it does not establish the fixed shape of each child.
Require every child payload to be exactly one u32 before reading it. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: dac: ad5686: missing NULL check on match data
Verify that chip_info pointer is not NULL. If a user binds the driver
using driver_override via sysfs with a device name not present in the
id_table or of_match_table, match data will be NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Serialize channel state checks
pause() and resume() read and update channel state without holding vc.lock,
while the interrupt handlers update the same state under it. Take the same
lock around those state checks so that request, status, and configured stay
consistent.
For example, pause() can observe EDMA_ST_BUSY right before the interrupt
handler completes the final descriptor and moves the channel to
EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No
further interrupt will acknowledge the request, and since issue_pending()
requires EDMA_REQ_NONE, the channel is wedged for good: terminate_all()
leaves the stale request behind, so even reconfiguring the channel does not
recover it.
issue_pending() already runs under vc.lock, but it tests configured before
taking it. Move that test under the lock as well, so configured, request,
and status are evaluated as one channel-state snapshot. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Unregister device notifier before IDR teardown
The requested-devices notifier looks up protocol fwnodes from the
active_protocols IDR. During remove, unregister the notifier before
releasing and destroying active_protocols so no notifier callback can race
with the IDR teardown.
Keep the bus notifier registered until after the protocol state is torn
down, matching the existing remove ordering for SCMI bus users. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
mlxbf_pmc_probe() passes the result of ACPI_COMPANION() to
acpi_device_hid(), which dereferences it, so force-binding the driver to
a device without an ACPI companion leads to a NULL pointer dereference.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
mlxbf-pmc driver and return -ENODEV when the companion is missing. |
