| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: team: fix NULL pointer dereference in team_xmit during mode change
__team_change_mode() clears team->ops with memset() before restoring
safe dummy handlers via team_adjust_ops(). A concurrent team_xmit()
running under RCU on another CPU can read team->ops.transmit during
this window and call a NULL function pointer, crashing the kernel.
The race requires a mode change (CAP_NET_ADMIN) concurrent with
transmit on the team device.
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: 0010 [#1] SMP KASAN NOPTI
RIP: 0010:0x0
Call Trace:
team_xmit (drivers/net/team/team_core.c:1853)
dev_hard_start_xmit (net/core/dev.c:3904)
__dev_queue_xmit (net/core/dev.c:4871)
packet_sendmsg (net/packet/af_packet.c:3109)
__sys_sendto (net/socket.c:2265)
The original code assumed that no ports means no traffic, so mode
changes could freely memset()/memcpy() the ops. AF_PACKET with
forced carrier breaks that assumption.
Prevent the race instead of making it safe: replace memset()/memcpy()
with per-field updates that never touch transmit or receive. Those
two handlers are managed solely by team_adjust_ops(), which already
installs dummies when tx_en_port_count == 0 (always true during mode
change since no ports are present). WRITE_ONCE/READ_ONCE prevent
store/load tearing on the handler pointers.
synchronize_net() before exit_op() drains in-flight readers that may
still reference old mode state from before port removal switched the
handlers to dummies. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: dualpi2: fix GSO backlog accounting
When DualPI2 splits a GSO skb into N segments, it propagates N
additional packets to its parent before returning NET_XMIT_SUCCESS.
The parent then accounts for the original skb once more, leaving its
qlen one larger than the number of packets actually queued.
With QFQ as the parent, after all real packets are dequeued, QFQ still
has a non-zero qlen while its in-service aggregate has no active
classes. qfq_choose_next_agg() returns NULL and qfq_dequeue() passes
the result to qfq_peek_skb(), causing a NULL pointer dereference.
Follow the same pattern used by tbf_segment() and taprio: count only
successfully queued segments, propagate the difference between the
original skb and those segments, and return NET_XMIT_SUCCESS whenever
at least one segment was queued. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it
In iwl_mld_remove_link, the link->fw_id is saved at the beginning of the
function so we have it after we freed the link.
But the link pointer can be NULL, and is not checked when the fw_id is
stored.
Fix it by simply freeing the link at the end of the function.
fFixes: 0e66a39f4f0e ("wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()") |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/time: Remove redundant preempt_disable|enable() calls from arch_irq_work_raise()
A kernel panic is observed when handling machine check exceptions from
real mode.
BUG: Unable to handle kernel data access on read at 0xc00000006be21300
Oops: Kernel access of bad area, sig: 11 [#1]
MSR: 8000000000001003 <SF,ME,RI,LE> CR: 88222248 XER: 00000005
CFAR: c00000000003ffc4 DAR: c00000006be21300 DSISR: 40000000 IRQMASK: 0
NIP [c000000000029e40] arch_irq_work_raise+0x10/0x70
LR [c00000000003ffc8] machine_check_queue_event+0xa8/0x150
Call Trace:
[c0000000179d3c70] [c00000000003ff64] machine_check_queue_event+0x44/0x150
[c0000000179d3d30] [c0000000000084e0] machine_check_early_common+0x1f0/0x2c0
The crash occurs because arch_irq_work_raise() calls preempt_disable()
from machine check exception (MCE) handlers running in real mode. In
this context, accessing the preempt_count can fault, leading to the panic.
The preempt_disable()/preempt_enable() pair in arch_irq_work_raise()
was originally added by commit 0fe1ac48bef0 ("powerpc/perf_event: Fix
oops due to perf_event_do_pending call") to avoid races while raising
irq work from exception context.
Later, commit 471ba0e686cb ("irq_work: Do not raise an IPI when
queueing work on the local CPU") added preemption protection in
irq_work_queue() path, while commit 20b876918c06 ("irq_work: Use per
cpu atomics instead of regular atomics") added equivalent
protection in irq_work_queue_on() before reaching arch_irq_work_raise():
irq_work_queue() / irq_work_queue_on()
-> preempt_disable()
-> __irq_work_queue_local()
-> irq_work_raise()
-> arch_irq_work_raise()
As a result, callers other than mce_irq_work_raise() already execute
with preemption disabled, making the additional
preempt_disable()/preempt_enable() pair in arch_irq_work_raise()
redundant.
The arch_irq_work_raise() function executes in NMI context when called
from MCE handler. Hence we will not be preempted or scheduled out since
we are in NMI context with MSR[EE]=0. Therefore, it is safe to remove
the preempt_disable()/preempt_enable() calls from here.
Remove it to avoid accessing preempt_count from real mode context.
[Maddy: Fixed the commit title] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/a6xx: Check kzalloc return in a8xx_hfi_send_perf_table
Check the return value of kzalloc() to prevent a NULL pointer
dereference on allocation failure.
Patchwork: https://patchwork.freedesktop.org/patch/721342/ |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: avoid NULL-ptr deref for claim via dropped interface
Without rtnl_lock held, a hardif might be retrieved as primary interface of
a meshif, but then (while operating on this interface) getting decoupled
from the mesh interface. In this case, the meshif still exists but the
pointer from the primary hardif to the meshif is set to NULL.
The mesh_iface must be checked first to be non-NULL before continuing to
send an ARP request using meshif. |
| The UpdateHub firmware-update agent's probe handler (z_impl_updatehub_probe() in subsys/mgmt/updatehub/updatehub.c) parses the JSON metadata returned by the update server into a fixed two-level nested-array struct. After parsing it validates only the outer array length (objects_len != 2) and then dereferences objects[1].objects[0].objects.sha256sum via strlen() without checking that the inner object array of element [1] is non-empty.
The metadata is attacker-influenceable network input: the agent fetches it over CoAP from the configured UpdateHub server during its routine OTA probe. A malicious or compromised update server (or, when DTLS is disabled, a network man-in-the-middle) can return a response whose second outer object array is empty. Because the parse target is zero-initialised, the corresponding objects[1].objects[0].objects.sha256sum pointer is NULL, and the subsequent strlen() dereferences address zero. The same defect exists in both the 'any boards' and 'some boards' metadata layouts.
The resulting CPU fault is fatal under Zephyr's default error handling, halting or resetting the device, so the flaw is a remotely triggerable denial of service. Impact is limited to availability; it is a read from NULL with no out-of-bounds write, memory corruption, or information disclosure. The fix rejects metadata whose inner object array is empty before any dereference, on both layouts. |
| A NULL pointer dereference vulnerability in fastschema through v0.15.1 allows an unauthenticated remote attacker to crash the server process with a single HTTP request. The sendOTPEmail function in pkg/auth/local.go dereferences a pointer obtained from an unchecked error path without validating it is non-nil, causing a fatal panic that terminates the entire server when a recovery request is sent to the /api/auth/local/recover endpoint. |
| The USB DFU class implementation in Zephyr's new (experimental) device_next USB device stack contains a NULL pointer dereference in handle_download() (subsys/usb/device_next/class/usbd_dfu.c). The handler computes MIN(setup->wLength, buf->len) and passes buf->data to the image write callback without checking that the buf net_buf pointer is non-NULL.
The handler is reached over the USB control endpoint, driven by the USB host. For a DFU_DNLOAD (download) request with no Data OUT stage — notably the zero-length terminating download that the DFU protocol uses to end a firmware transfer — the USB core invokes the class handler with a NULL buffer. After the device has been advanced to the DFU_DNLOAD_IDLE state (by sending one valid download block and a GET_STATUS), a zero-length DFU_DNLOAD reaches handle_download() with buf == NULL, dereferencing it.
The result is a NULL+offset read that triggers a fatal CPU fault, i.e. a denial of service (device crash/reset). The attacker is whatever controls the USB host the device is attached to; DFU download support must be enabled with a registered image. There is no memory corruption or information disclosure — impact is limited to availability. The fix adds an explicit if (buf != NULL) guard so the callback receives a zero-length, NULL-data transfer instead of crashing. |
| A NULL pointer vulnerability has been found in the the shim application of dp.c library. A missing NULL pointer could allow attackers to perform a denial of service attack on a system that uses shim application for UEFI bootloader. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Prevent user-triggered null deref on QP create
Previously, the user QP creation path would only attempt to
populate iwqp->iwpbl if the user-provided req.user_wqe_bufs
field was non-zero. The problem is that iwqp->iwpbl is
unconditionally dereferenced later on in irdma_setup_virt_qp.
While there was a check for iwqp->iwpbl != NULL, this check
would only occur if req.user_wqe_bufs was non-zero. The end
result is that a user could send a zero user_wqe_bufs value
and trigger a null ptr deref.
Fix this by unconditionally calling irdma_get_pbl and bailing
if it fails, similar to the CQ and SRQ paths. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix crash in reset link replay
During reset recovery, mt7925_vif_connect_iter() replays firmware state
for links tracked in mvif->valid_links. After MLO link changes or MCU
timeout recovery, the driver bitmap can temporarily contain a link whose
mac80211 bss_conf has already gone away.
This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching
the crash where x1, the second argument, is NULL:
pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080
Call trace:
mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common]
Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA
reset replay is unchanged because the helper still returns &vif->bss_conf
for the legacy link. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: fix NULL pointer dereference in dpll_msg_add_pin_ref_sync()
When a dpll_pin is shared across multiple dpll_device instances and
those devices are being unregistered (e.g. during driver module removal),
a NULL pointer dereference can occur in dpll_msg_add_pin_ref_sync().
This happens under the following conditions:
- A pin is registered with two or more dpll devices (dpll_A, dpll_B)
- The pin has ref_sync pairs with other pins
- During unregistration of dpll_A's pins, a ref_sync partner pin is
unregistered first, removing it from dpll_A->pin_refs
- But since the partner pin is still registered with dpll_B, its
dpll_refs is not empty, so dpll_pin_ref_sync_pair_del() does NOT
run and the partner stays in the pin's ref_sync_pins xarray
- When the pin itself is then unregistered from dpll_A, the delete
notification calls dpll_msg_add_pin_ref_sync() which finds the
partner in ref_sync_pins, passes dpll_pin_available() (partner is
still registered with dpll_B), but dpll_pin_on_dpll_priv(dpll_A,
partner) returns NULL because partner was already removed from
dpll_A->pin_refs
- The NULL priv pointer is passed to the driver's ref_sync_get
callback, which dereferences it
BUG: kernel NULL pointer dereference, address: 0000000000000034
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:zl3073x_dpll_input_pin_ref_sync_get+0x73/0x80 [zl3073x]
Call Trace:
dpll_msg_add_pin_ref_sync+0xb8/0x200
dpll_cmd_pin_get_one+0x3b6/0x4b0
dpll_pin_event_send+0x72/0x140
__dpll_pin_unregister+0x5a/0x2b0
dpll_pin_unregister+0x49/0x70
Fix this by skipping ref_sync pins whose priv pointer cannot be resolved
for the current dpll device. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject redirect helpers without a bpf_net_context
The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task
bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the
current->bpf_net_context unconditionally. That context is established
on the paths that run tc BPF such as sch_handle_{ingress,egress}(),
*except* for the case where {cls,act}_bpf was attached to a proper
qdisc. A program running from there reaches the NULL deref in two ways:
* It calls bpf_redirect() directly, which dereferences the context at
the top of the helper:
tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \
avpkt 1000 burst 100 qevent early_drop block 10
tc filter add block 10 pref 1 bpf obj redirect.o
* It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle()
then dispatches to skb_do_redirect(), which dereferences the context
Rather than extending bpf_net_context management into the qdisc path,
make the redirect helpers refuse to operate when no context exists, and
have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of
calling skb_do_redirect(). Previous behaviour was a crash, so nothing
regresses by not supporting it. |
| In the Linux kernel, the following vulnerability has been resolved:
arm_mpam: guard MBWU state before adding it to garbage
__destroy_component_cfg() adds each RIS mbwu_state object to the MPAM
garbage list when destroying component configuration.
However, mbwu_state is allocated per RIS and only for RISes with MBWU
monitors. A component can therefore have comp->cfg allocated while some
RISes still have ris->mbwu_state set to NULL.
Passing a NULL mbwu_state to add_to_garbage() dereferences the NULL
pointer inside the macro.
Skip RISes that do not have an mbwu_state object before adding them to
the garbage list. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: check pointer returned by mt76_connac_get_he_phy_cap()
mt76_connac_get_he_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: guard link STA in decap offload
mt7925_sta_set_decap_offload() iterates over the vif valid_links mask
when updating decap offload state for an MLO station. The station may not
have a link STA for every valid link of the vif, so mt792x_sta_to_link()
can return NULL for a link that belongs to the vif but not to the station.
The function currently dereferences mlink before checking whether the
link WCID is ready. If mlink is NULL, setting or clearing
MT_WCID_FLAG_HDR_TRANS dereferences a NULL pointer.
Skip links without a station link before touching mlink->wcid. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: fix error checking of pvr_vm_context_lookup()
Since pvr_vm_context_lookup() returns either NULL or a pointer, then stop
using IS_ERR() for checking the return value.
Using IS_ERR() leads to the kernel oops reported below. It can be
reproduced by passing an invalid VM context handle from userspace to the
DRM_IOCTL_PVR_CREATE_CONTEXT ioctl.
[ 92.733119] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000148
[ 92.742042] Mem abort info:
[ 92.744890] ESR = 0x0000000096000004
[ 92.748686] EC = 0x25: DABT (current EL), IL = 32 bits
[ 92.754020] SET = 0, FnV = 0
[ 92.757154] EA = 0, S1PTW = 0
[ 92.760337] FSC = 0x04: level 0 translation fault
[ 92.765243] Data abort info:
[ 92.768129] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 92.773626] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 92.778763] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 92.784098] user pgtable: 4k pages, 48-bit VAs, pgdp=000000088ed23000
[ 92.790550] [0000000000000148] pgd=0000000000000000, p4d=0000000000000000
[ 92.797381] Internal error: Oops: 0000000096000004 [#1] SMP
[ 92.803027] Modules linked in: powervr
[ 92.852533] CPU: 0 UID: 0 PID: 409 Comm: triangle Not tainted 7.1.0-rc5-g98b46e693b91 #1 PREEMPT
[ 92.861385] Hardware name: Texas Instruments AM68 SK (DT)
[ 92.866766] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 92.873709] pc : pvr_vm_get_fw_mem_context+0x0/0xc [powervr]
[ 92.879376] lr : pvr_queue_create+0x26c/0x440 [powervr]
[ 92.884595] sp : ffff8000837fbb00
[ 92.887895] x29: ffff8000837fbb60 x28: 0000000000000000 x27: ffff8000837fbce8
[ 92.895015] x26: ffff000807f61a40 x25: ffff000807f61a00 x24: ffff000807f64400
[ 92.902135] x23: ffff00080a5ab000 x22: ffff800079b24730 x21: ffff000807f61800
[ 92.909254] x20: ffff00080999e680 x19: 0000000000000000 x18: 0000000000000000
[ 92.916373] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001
[ 92.923492] x14: 0000000000000000 x13: 0000000000000002 x12: ffff80008145b298
[ 92.930611] x11: ffff8000844e5000 x10: ffff80008165a130 x9 : 0000000000000100
[ 92.937730] x8 : 0000000000000001 x7 : ffff0008076b27e0 x6 : ffff00080ec43b7c
[ 92.944850] x5 : ffff00080ec43b78 x4 : 0000000000000000 x3 : ffff00080999e680
[ 92.951968] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
[ 92.959088] Call trace:
[ 92.961521] pvr_vm_get_fw_mem_context+0x0/0xc [powervr] (P)
[ 92.967173] pvr_context_create+0x190/0x410 [powervr]
[ 92.972218] pvr_ioctl_create_context+0x44/0x8c [powervr]
[ 92.977608] drm_ioctl_kernel+0xbc/0x124 [drm]
[ 92.982127] drm_ioctl+0x1f8/0x4dc [drm]
[ 92.986098] __arm64_sys_ioctl+0xac/0x104
[ 92.990102] invoke_syscall+0x54/0x10c
[ 92.993842] el0_svc_common.constprop.0+0x40/0xe0
[ 92.998532] do_el0_svc+0x1c/0x28
[ 93.001835] el0_svc+0x38/0x11c
[ 93.004969] el0t_64_sync_handler+0xa0/0xe4
[ 93.009139] el0t_64_sync+0x198/0x19c
[ 93.012792] Code: aa1703e0 d2800014 95cb0ba4 17ffffe8 (f940a400)
[ 93.018869] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: check amdgpu_vm_bo_find() result in GET_MAPPING_INFO
The AMDGPU_GEM_OP_GET_MAPPING_INFO path of amdgpu_gem_op_ioctl() looks
up the bo_va for the buffer object in the caller's VM via
amdgpu_vm_bo_find(), but uses the returned pointer without checking it.
amdgpu_vm_bo_find() returns NULL when the BO has no bo_va in that VM,
which is the normal case for a BO that has never been mapped. The result
is fed straight into amdgpu_vm_bo_va_for_each_valid_mapping(), which
expands to list_for_each_entry(mapping, &(bo_va)->valids, list) and
dereferences bo_va, causing a NULL pointer dereference.
This is reachable by any process able to issue the ioctl (render group)
simply by requesting mapping info for an unmapped BO.
Return -ENOENT when no bo_va is found, jumping to out_exec so the
drm_exec context and GEM object reference are released.
(cherry picked from commit 528b19377affc1cc7362a70a254c1dda793595f9) |
