| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based Buffer Overflow in GitHub repository vim/vim prior to 9.0.1225. |
| Use After Free in GitHub repository vim/vim prior to 9.0.0530. |
| Use After Free in GitHub repository vim/vim prior to 9.0.0389. |
| Use After Free in GitHub repository vim/vim prior to 9.0.0322. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix device_register() error path
When device_register() fails in i3c_master_register_new_i3c_devs(),
put_device() is called to drop the reference taken by
device_register(). That drops the last reference, so the device's
release callback i3c_device_release() runs and frees the i3c_device.
Two problems follow from that:
i3c_device_release() does WARN_ON(i3cdev->desc), so it warns because
desc->dev->desc still points back at the descriptor. Clear it before
calling put_device().
After put_device() frees the i3c_device, desc->dev is left pointing at
freed memory, so clear desc->dev as well. That prevents, for example,
i3c_master_unregister_i3c_devs() seeing desc->dev as non-NULL and
dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix maximum allowed access checks
The DACL permission check looks for an ACE matching the current user and
falls back to the Everyone ACE. It does not consider an Authenticated
Users ACE, even though an authenticated session is a member of that
well-known group.
As a result, opening a file whose access is granted through S-1-5-11 can
incorrectly fail with STATUS_ACCESS_DENIED. Treat an Authenticated Users
ACE as a fallback entry alongside Everyone.
The maximal access calculation also combines access masks from every ACE,
regardless of whether its SID applies to the current user. This can grant
rights belonging to an unrelated principal. Process only ACEs applying to
the user, Everyone, or Authenticated Users, and accumulate allowed and
denied masks in ACL order. Preserve explicitly requested access bits so
they are validated against the resulting maximal mask.
When ACCESS_SYSTEM_SECURITY is denied, report STATUS_PRIVILEGE_NOT_HELD
instead of the generic STATUS_ACCESS_DENIED. Access to the system ACL
requires a security privilege that ksmbd does not grant.
For regular files, include FILE_EXECUTE in maximal access when the client
requested GENERIC_EXECUTE and the DACL grants the complete file-read set.
Keep a direct FILE_EXECUTE request subject to the explicit DACL bit. This
matches the POSIX file ACL mapping without broadening specific execute
requests.
Do not replace rights from an applicable NT ACE with a POSIX ACL entry.
The POSIX ACL is only a fallback when no user, Everyone, or Authenticated
Users ACE applies; otherwise it can incorrectly broaden the stored DACL.
This fixes smb2.maximum_allowed.maximum_allowed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix HE extended capability length check
rtw89_mac_check_he_obss_narrow_bw_ru_iter() reads extended capability
byte 10, but rejects only datalen values below 10. Byte 10 requires at
least 11 bytes.
Require datalen >= 11 before reading data[10]. |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: audio: bound the topology section sizes against the fetched size
gb_audio_gb_get_topology() fetches a topology blob of a module-supplied
size, and gbaudio_tplg_parse_data() then walks it by adding the
module-supplied size_dais, size_controls and size_widgets fields to
form the control, widget and route section offsets. Those le32 sizes
are never checked against the fetched blob, so a module reporting a
small topology size but large section sizes makes the offsets point
past the allocation, and parsing reads out of bounds.
Reject a topology whose section sizes do not fit within the fetched
size before it is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown
The TX cleanup tasklet can be scheduled by the watchdog IRQ handler
to execute cvm_oct_tx_do_cleanup. There can be a pending tasklet in
the queue which might run after the cvm_oct_remove() frees net_device
structures, causing a use-after-free in cvm_oct_tx_do_cleanup() as it
iterates cvm_oct_device[] which is an array of netdevice pointers.
Add tasklet_kill() after free_irq() to ensure the tasklet is no longer
scheduled or running before teardown proceeds. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing napi_disable in cvm_oct_rx_shutdown
cvm_oct_rx_shutdown calls free_irq and netif_napi_del without
disabling the napi instance first. As the free_irq only waits
for completion of hard interrupt handlers, the napi poll
function could still be active. If cvm_oct_remove proceeds to
free the plat structure (which holds the NAPI instances), the
active poll function will access freed memory, resulting in a
use-after-free crash. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Validate udata before executing commands
The destroy callbacks currently zero the udata output after tearing down
driver resources. If the userspace access fails, uverbs preserves the
uobject and allows the destroy callback to run again, even though the
driver resource has already been freed.
Call ib_no_udata_io() before teardown so udata failures are detected
while the resource is still intact, then return success after teardown
completes.
As part of this change, move ib_respond_empty_udata() to the start of
the create and modify flows. While this is not strictly required for
general create flows, as the core layer unwinds uobjects on failure, it
is necessary for create AH. In _rdma_create_ah(), the HW object is
otherwise leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: renesas: phy-rcar-gen3-usb2: Fix devm action registration for disabled VBUS regulator
devm_regulator_get_exclusive() initialises the regulator with
enable_count = 1, requiring the consumer to disable it before release.
The devm disable action was previously only registered when the caller
explicitly requested enable, so when the regulator was left in its initial
enabled state without an explicit enable call, the cleanup path skipped
decrementing enable_count, triggering a WARN_ON during regulator
release on device removal.
Fix this by always registering the devm disable action based on the actual
enabled state via regulator_is_enabled(), regardless of whether the
caller requested an explicit enable. This covers both the explicitly
enabled case and the initial state set by devm_regulator_get_exclusive(). |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/pt: Fix stop/start with no update
If pt_event_stop() is called without PERF_EF_UPDATE flag, then
perf_aux_output_end() is not called. A subsequent call to pt_event_start()
will call perf_aux_output_begin() again which violates the rule against
nesting and triggers a WARNING in perf_aux_output_begin().
Originally, pt_event_stop() was never called without PERF_EF_UPDATE,
because the only code paths to do so are from event overflow, and Intel PT
does not do that.
However the introduction of group throttling by commit 9734e25fbf5ae
("perf: Fix the throttle logic for a group") meant that an Intel PT event
could be throttled if it was part of a group. Throttling calls PMU
->stop() / ->start() callbacks without flags.
An example is when AUX area sampling is used. The following commands
hit the issue:
echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate
perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \
-- bash -c 'for i in `seq 1 100000` ; do true ; done'
Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and
perf_aux_output_end() are balanced. A cleared PERF_HES_UPTODATE bit
indicates that an AUX output context is still open.
Amend pt_event_start() / pt_event_stop() accordingly so that begin/end
stay balanced:
- In non-snapshot mode, stop() always closes the buffer (the buffer may
have run out of space, and that accounting is done by the update), so
a following start() opens a fresh one as before.
- In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the
buffer open so that pt_event_snapshot_aux() can still copy from it,
and start() then only re-enables tracing instead of calling
perf_aux_output_begin() again.
Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set
(as is required by the documentation), so a final call to
perf_aux_output_end() is assured. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: bcm2835: Don't remove an unregistered GPIO chip
If the devm_pinctrl_register() function fails,
bcm2835_pinctrl_probe() calls gpiochip_remove()
before gpiochip_add_data() has registered the GPIO chip.
This means that upon failure the gpio_chip.gpiodev
is NULL resulting in a null pointer dereference
inside the gpiochip_remove() function.
Remove the unnecessary function call to gpiochip_remove().
No GPIO cleanup is required because the GPIO chip
has not yet been registered. Without this change there
is potential for a kernel panic upon registration failure |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: tps6594: Fix device node reference leaks in multiphase loop
In tps6594_regulator_probe(), the multi-phase configuration loop calls
of_find_node_by_name() to find buck nodes by name, and of_get_parent()
twice to navigate to the PMIC parent node. None of the acquired node
references (np, intermediate parent, np_pmic_parent) are ever released
via of_node_put(), causing a reference leak on every loop iteration.
Additionally, of_find_node_by_name() can return NULL, but the result was
immediately passed to of_node_full_name() and of_get_parent() without a
NULL check, which could lead to a NULL pointer dereference.
Fix this by:
- Adding a NULL check for np after of_find_node_by_name()
- Storing the intermediate parent node in a local variable np_parent
- Calling of_node_put() on np, np_parent and np_pmic_parent at the
end of each loop iteration |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3
The changes introduced to handle single power domain platforms have
swapped the info pointer increment from num_pd_vregs to num_pds, which
would shift the info pointer past the end of the array for pronto-v3,
which does not list power domain regulators in vregs.
This showed up as a difference between GCC- and LLVM-compiled kernels
on SDM632 devices, where only with LLVM one would get the
"regulator request with no identifier" error, because the out-of-bounds
memory ended up being zeroed. Fix by skipping the increment when there
are more power domains than regulators. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cap out-of-range rx MCS instead of leaving bogus rate
ath11k can receive HT/VHT/HE frames whose reported MCS is above the
maximum that can be expressed in the corresponding mac80211 rate space
(e.g. an HE frame reported with MCS 12, while HE tops out at MCS 11).
The frame itself is valid and decodes correctly, but for such a frame
ath11k_dp_rx_h_rate() leaves rx_status->rate_idx set to the out-of-range
value and never assigns rx_status->encoding, so it stays RX_ENC_LEGACY
from the ath11k_dp_rx_h_ppdu() initialization. Once that frame reaches
mac80211 it trips the rate sanity check and the frame is dropped with a
splat:
ath11k_pci 0000:03:00.0: Received with invalid mcs in HE mode 12
WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:5433 ieee80211_rx_list+0xb0a/0xe90 [mac80211]
Dropping the frame would discard otherwise valid data, so instead cap the
reported MCS to the maximum the rate space can express and deliver the
frame. Set rx_status->encoding before the range check and assign rate_idx
from the capped value, so a frame with an out-of-range MCS no longer
leaves partial or bogus rate metadata behind. Also downgrade the logging
level since they are not treated as invalid frames now. The only loss is
that such a frame is reported as the capped MCS in the rx rate statistics.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow interpreter fallback for BPF_ADDR_PERCPU insn
The BPF_MOV64_PERCPU_REG insn requires JIT to emit native code to for
'dst_reg = src_reg + <percpu_base_off>'.
However, the interpreter ignores the 'off' at its ALU64_MOV_X label.
The 'off' indicates the insn is BPF_MOV64_PERCPU_REG insn. Then, when
the interpreter loads memory from the register, it will hit a page
fault.
[ 2.545572] BUG: unable to handle page fault for address: ffffffffacaaf034
[ 2.546485] #PF: supervisor read access in kernel mode
[ 2.547167] #PF: error_code(0x0000) - not-present page
[ 2.547850] PGD 134e63067 P4D 134e63067 PUD 134e64063 PMD 10021c063 PTE 800ffffeca550062
[ 2.548912] Oops: Oops: 0000 [#1] SMP PTI
Set jit_required as true in order to disallow interpreter fallback in
core.c::__bpf_prog_select_runtime(), if any BPF_ADDR_PERCPU insn is
patched to the prog.
BTW, rename the helper bpf_map_supports_cpu_flags() to
bpf_map_is_percpu_map(). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix circular lock dependency in ext4_ext_migrate
Move iput(tmp_inode) after ext4_writepages_up_write() to avoid a
circular lock dependency between s_writepages_rwsem and sb_internal
(freeze protection).
The deadlock scenario:
CPU0 (EXT4_IOC_MIGRATE) CPU1 (orphan cleanup during mount)
---- ----
ext4_ext_migrate()
ext4_writepages_down_write()
s_writepages_rwsem (write)
ext4_evict_inode()
sb_start_intwrite() [sb_internal]
...
ext4_writepages()
s_writepages_rwsem (read) [BLOCKED]
iput(tmp_inode)
ext4_evict_inode()
sb_start_intwrite() [BLOCKED]
The tmp_inode is a temporary inode with nlink=0 created solely for
building the extent tree. Its eviction does not require
s_writepages_rwsem protection, so deferring iput() until after
releasing the rwsem is safe. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: skip extra isize expansion during mount to prevent deadlock
ext4_try_to_expand_extra_isize() is called from __ext4_mark_inode_dirty()
while holding an active jbd2 handle. During mount (!SB_ACTIVE), the
expand path may move xattrs to external blocks and release ea_inodes via
iput(). When !SB_ACTIVE, iput() calls write_inode_now() which acquires
s_writepages_rwsem, creating a circular lock dependency:
s_writepages_rwsem --> jbd2_handle --> xattr_sem --> s_writepages_rwsem
This can be triggered via:
ext4_process_orphan() -> ext4_truncate() -> ext4_mark_inode_dirty()
-> ext4_try_to_expand_extra_isize()
or:
ext4_evict_inode() -> ext4_mark_inode_dirty()
-> ext4_try_to_expand_extra_isize()
Skip expansion when !SB_ACTIVE. This is a minor loss of functionality
(extra isize won't grow for these inodes during mount), which e2fsck
can resolve later if needed. |
