| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()
rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:
const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
...
c = frame_body[0];
...
a = frame_body[1];
frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.
This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.
Add the missing length check before frame_body is dereferenced. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read / stack overflow in rtw_get_wps_attr()
rtw_get_wps_attr() walks WPS attributes inside a WPS IE taken from
a wireless management frame. For each candidate attribute it only
checks that the fixed 4-byte attribute header (2-byte ID + 2-byte
length) fits inside the IE:
if (attr_ptr + 4 > wps_ie + wps_ielen)
break;
u16 attr_id = get_unaligned_be16(attr_ptr);
u16 attr_data_len = get_unaligned_be16(attr_ptr + 2);
u16 attr_len = attr_data_len + 4;
attr_data_len (and therefore attr_len) is read directly from the
wire and is never checked against the remaining bytes in the IE
before being used as the size of:
memcpy(buf_attr, attr_ptr, attr_len);
Since attr_len is fully attacker controlled (0 to 65535+4), this is
both a heap OOB read of wps_ie, and, more seriously, a stack buffer
overflow at several call sites where buf_attr is a single-byte
stack variable, e.g. rtw_get_wps_attr_content()'s callers passing
WPS_ATTR_SELECTED_REGISTRAR into a stack "u8 sr"/"u8
selected_registrar" (drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c,
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c). A crafted WPS IE in a
beacon or probe response processed during scanning can therefore
smash the stack of the parsing thread.
rtw_get_wps_attr_content() itself has no independent length check
and simply trusts the attr_len it gets back from rtw_get_wps_attr(),
so fixing the bound here also fixes that caller.
The "attr_ptr + 4 > wps_ie + wps_ielen" header check above was added
by commit 1463ca3ec6601 ("staging: rtl8723bs: fix OOB reads in
rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()"), which
bounded the fixed header but never extended the check to cover the
variable-length attribute data that follows it. Add that missing
check before attr_len is used as a memcpy() length or accepted as a
match. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_midi2: fix use-after-free in string attribute show path
f_midi2_opts_str_show() takes the string lock internally, but its
callers dereference the opts->info.<field> pointer before calling it,
outside the lock. This races with f_midi2_opts_str_store(), which
frees the old string under opts->lock when the attribute is written
concurrently, the show path can read a pointer that gets freed
before the lock inside str_show() is even taken.
Change f_midi2_opts_str_show() to take a pointer to the string field,
matching the existing pattern in f_midi2_opts_str_store(), and
dereference it only after the lock is held. Update all three callers
(iface_name, block name, and the EP string option macro) accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers()
Previously fsg_num_buffers_validate() was removed as it was not
necessary due to Kconfig setting the limits for n from 2 to 256 with
default as 2. However, setting the page content in such a way that
kstrtou8() reflects n value as either 0 or 1 bypasses these
restrictions leading to a null pointer dereference if n is 0. Fix
this by adding a check for n < 2 and returning -EINVAL if n is
either 0 or 1 consistent with Kconfig logic. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: qcom-pmic: cancel reset_work on stop
pdphy_stop() disables IRQs but leaves reset_work pending. If the IRQ
handler schedules it just before disable_irq(), the work runs after
remove() frees the struct via devm.
Call cancel_work_sync() after disabling IRQs to close the window.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
usb-storage: ene_ub6250: fix race between scan work and probe
ene_ub6250_probe() calls usb_stor_probe2(), which starts the usb-storage
infrastructure and schedules the delayed scan work. The driver then
calls ene_get_card_type(), which sends an ENE command through
ene_send_scsi_cmd() and the usb-storage bulk transfer helpers.
Both the delayed scan work, through usb_stor_Bulk_max_lun(), and
ene_get_card_type() use us->current_urb. The scan work serializes this
access with us->dev_mutex, but the ENE card-type probe does not. If the
scan work runs while ene_get_card_type() is still using us->current_urb,
usb_submit_urb() warns that the URB is already active.
Serialize ene_get_card_type() with us->dev_mutex, matching the locking
used by the scan path. |
| Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier does not reject @Builder annotations whose builderStrategy member names an arbitrary class, allowing attackers with permission to define and run sandboxed scripts, including Pipelines, to execute code outside the sandbox if a suitable class is present on the classpath of the component that evaluates the script. |
| Graylog through 7.1.4 validates outbound URLs against an allowlist before making requests but fails to re-validate after following HTTP redirects. Attackers with lookup table or event notification permissions can craft allowlisted endpoints that redirect to internal services, enabling the server to fetch and return internal responses. |
| OpenSign through 2.41.3 fails to validate caller identity in the getDocument cloud function when one-time-password verification is disabled. Attackers can supply a document identifier from guest signing links to retrieve complete document details including all signers' information, sender identity, and valid download tokens without authentication. |
| Docs before 5.4.1 fails to properly revoke websocket collaboration connections when access is revoked at parent documents. Attackers with revoked access can retain real-time read and write access to sub-documents through open websocket sessions that are never disconnected. |
| changedetection.io through 0.60.6 fails to escape the scraped page title in HTML notifications, allowing arbitrary markup injection. Attackers can place malicious markup in monitored page titles that reaches notification channels like email and Telegram as live content when the watch_title token is used in templates. |
| The Autopay WordPress plugin before 5.0.1 does not enforce the signature on one of its payment callbacks, allowing unauthenticated users to disclose and delete the stored payment parameters of other customers' orders. |
| A flaw was found in RESTEasy's IIOImageProvider, which decodes attacker-supplied image request bodies without enforcing any limit on the declared image dimensions or pixel count. A remote, unauthenticated attacker can send a small crafted image declaring enormous dimensions to trigger a very large memory allocation, exhausting the JVM heap and resulting in a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
media: usbtv: keep device alive while ALSA card exists
The ALSA PCM callbacks store the driver state in pcm->private_data. An
open PCM file can outlive USB disconnect because usbtv_audio_free() uses
snd_card_free_when_closed(). The disconnect path can then drop the V4L2
device reference and free struct usbtv before ALSA releases the substream,
so a later close dereferences freed memory in snd_usbtv_pcm_close().
Take a V4L2 device reference for the ALSA card and drop it from the card
private_free callback. This keeps struct usbtv valid until ALSA has closed
the remaining files and freed the card. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output()
The snd_usbmidi_us122l_output() picks a count of 2 on anything slower
than high speed and never relates it to ep->max_transfer. The URB
buffer holds exactly max_transfer bytes, so a device declaring a one
byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the
memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX.
Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at
0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the
USB core only clamps downward.
The akai and novation output ops in this file were given the same guard
recently. Do the same here. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sony: clean up device list on probe failure
sony_input_configured() adds some controllers to sony_device_list before
HID core registers their input devices. input_register_device() can fail
after the callback returns successfully. sony_probe() then observes that
HID_CLAIMED_INPUT is clear and unwinds, but only stops the HID hardware.
The devres-managed sony_sc is freed while its list node remains linked, so
the next matching controller traverses freed memory.
Initialize the list node and device ID to inactive states. Make list
removal idempotent and run the driver-private cleanup on every probe
failure path. This also makes a second cleanup safe when
sony_input_configured() already unwound a partial initialization before
sony_probe() handles the missing input claim.
Found by 0sec (https://0sec.ai) using automated source analysis;
verified against the HID input registration and probe unwind paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: properly decrypt filenames in vmalloc() buffers
The fscrypt subsystem uses the scatterlist crypto API, inheriting its
requirement that any buffers are in the linear mapping region. However,
the messenger client uses kvmalloc() to create buffers for messages,
which will occasionally place those buffers in the vmalloc() region when
physical memory fragmentation doesn't permit a large enough kmalloc().
The various callers of ceph_fname_to_usr() directly pass (slices of) raw
messages from the MDS without considering that the messages may be in
vmalloc() buffers, resulting in oopses especially on non-x86 platforms
(see 'Closes:' for more details and a reproducer).
Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated
fname->ctext, fname->name, and/or oname->name buffers, using `tname`
(which, when non-null, must be a linear address; when null, is briefly
allocated as necessary) as a bounce buffer to avoid passing any
inappropriate addresses to fscrypt_fname_disk_to_usr().
Additionally change parse_reply_info_readdir() -- the only function to
supply its own `tname` -- to follow the new "tname must never come from
vmalloc()" rule by passing NULL when the message is not in the linear
region. Though this causes a per-dentry kmalloc()+kfree(), this overhead
exists only when processing the minority of messages that spill into
vmalloc(). My (crude) testing puts this at only about 1 in 8,000 readdir
messages. Still, if the overhead proves unreasonable in the future, it
is easy enough to mitigate: a future change could allocate a bounce
buffer in parse_reply_info_readdir() and use that as `tname` instead. |
| In Eclipse Ankaios versions 0.6.0 to before 1.0.4, `LogRule::matches` in the agent control-interface authorizer stops at the first wildcard pattern in a single rule instead of evaluating later entries, which can cause deny `LogRule` entries to be skipped and allow unauthorized access to another workload's logs. |
| Improper input validation in Snowflake CLI versions prior to 3.27.0 allowed unsanitized user-controlled values to be interpolated into SQL strings that are executed as multi-statement queries. An attacker who is able to supply a malicious project configuration file or craft command-line input can cause Snowflake CLI to execute attacker-controlled SQL statements in the context of the victim's Snowflake session and active role. Successful exploitation requires either write or pull-request access to a project repository whose CI/CD pipeline runs Snowflake CLI under an elevated service account role, or the ability to supply untrusted input to CLI-wrapping automation. Impact is limited by the privileges held by the configured Snowflake role at execution time. The fix is available in Snowflake CLI version 3.27.0, which also addresses several additional security findings. Users must manually upgrade. |
| Dell OpenManage Server Administrator, versions prior to 11.1.0.3, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Remote execution. |
