| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| This affects versions of the package exifreader before 4.39.0. A crafted image containing an ICC mluc tag can set an attacker-controlled record count together with a zero record size. During parsing, ExifReader repeatedly processes the same record and appends entries to an array without sufficient bounds validation, causing excessive memory growth. In applications that parse attacker-supplied images, this may lead to denial of service through memory exhaustion. |
| Insufficient parameter sanitization in TEE SOC Driver could allow an attacker to issue a malformed DRV_SOC_CMD_ID_SRIOV_COPY_VF_CHIPLET_REGS to write invalid data to a remote Die, potentially resulting in unexpected behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require minimum ACE size in smb_check_perm_dacl()
Both ACE-walk loops in smb_check_perm_dacl() only guard against an
under-sized remaining buffer, not against an ACE whose declared
`ace->size` is smaller than the struct it claims to describe:
if (offsetof(struct smb_ace, access_req) > aces_size)
break;
ace_size = le16_to_cpu(ace->size);
if (ace_size > aces_size)
break;
The first check only requires the 4-byte ACE header to be in bounds;
it does not require access_req (4 bytes at offset 4) to be readable.
An attacker who has set a crafted DACL on a file they own can declare
ace->size == 4 with aces_size == 4, pass both checks, and then
granted |= le32_to_cpu(ace->access_req); /* upper loop */
compare_sids(&sid, &ace->sid); /* lower loop */
reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at
offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES
* 4 bytes).
Tighten both loops to require
ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE
which is the smallest valid on-wire ACE layout (4-byte header +
4-byte access_req + 8-byte sid base with zero sub-auths). Also
reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES
before letting compare_sids() dereference sub_auth[] entries.
parse_sec_desc() already enforces an equivalent check (lines 441-448);
smb_check_perm_dacl() simply grew weaker validation over time.
Reachability: authenticated SMB client with permission to set an ACL
on a file. On a subsequent CREATE against that file, the kernel
walks the stored DACL via smb_check_perm_dacl() and triggers the
OOB read. Not pre-auth, and the OOB read is not reflected to the
attacker, but KASAN reports and kernel state corruption are
possible. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.5 before 18.9.7, 18.10 before 18.10.6, and 18.11 before 18.11.3 that could have allowed an unauthenticated user to cause denial of service by sending specially crafted payloads on certain API endpoints. |
| Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. Prior to 1.0.8.2, Vvveb CMS does not validate the sign of the quantity parameter on the cart-add endpoint. Submitting a negative integer is accepted by the server and treated as a normal positive line-item, but with the sign carried through into every downstream computation: line total, sub-total, taxes, and grand total all become negative numbers. The customer-facing cart UI then displays a negative grand total to the user, the checkout flow accepts the negative cart, and the resulting order is persisted in the merchant's database with a negative total column. From the merchant's order management dashboard, this surfaces as a real order with a negative total — an "the merchant owes the customer money" record that no legitimate workflow ever creates. This vulnerability is fixed in 1.0.8.2. |
| Insufficient parameter sanitization in TEE SOC Driver could allow an attacker to issue a malformed DRV_SOC_CMD_ID_SRIOV_CHECK_TA_COMPAT to cause incorrect shared memory mapping, potentially resulting in unexpected behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: define and enforce CEPH_MAX_KEY_LEN
When decoding the key, verify that the key material would fit into
a fixed-size buffer in process_auth_done() and generally has a sane
length.
The new CEPH_MAX_KEY_LEN check replaces the existing check for a key
with no key material which is a) not universal since CEPH_CRYPTO_NONE
has to be excluded and b) doesn't provide much value since a smaller
than needed key is just as invalid as no key -- this has to be handled
elsewhere anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix interlaced plain identification for encoded extents
Only plain data whose start position and on-disk physical length are
both aligned to the block size should be classified as interlaced
plain extents. Otherwise, it must be treated as shifted plain extents.
This issue was found by syzbot using a crafted compressed image
containing plain extents with unaligned physical lengths, which can
cause OOB read in z_erofs_transform_plain(). |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.18, improper validation of the JWT NumericDate claims exp, nbf, and iat in hono/utils/jwt allows tokens with non-spec-compliant claim values to silently bypass time-based checks. This issue is not exploitable by an anonymous attacker; it only manifests when a malformed claim value reaches verify() — typically when the application itself issues such tokens, or when the signing key is otherwise under attacker control. This vulnerability is fixed in 4.12.18. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
This adds a check for encryption key size upon receiving
L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which
expects L2CAP_CR_LE_BAD_KEY_SIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
enic: Validate length of nl attributes in enic_set_vf_port
enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE
is of length PORT_PROFILE_MAX and that the nl attributes
IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX.
These attributes are validated (in the function do_setlink in rtnetlink.c)
using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE
as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and
IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation
using the policy is for the max size of the attributes and not on exact
size so the length of these attributes might be less than the sizes that
enic_set_vf_port expects. This might cause an out of bands
read access in the memcpys of the data of these
attributes in enic_set_vf_port. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix not validating setsockopt user input
Check user input length before copying data. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
On the receive path, __ioam6_fill_trace_data() uses trace->nodelen
to decide how much data to write for each node. It trusts this field
as-is from the incoming packet, with no consistency check against
trace->type (the 24-bit field that tells which data items are
present). A crafted packet can set nodelen=0 while setting type bits
0-21, causing the function to write ~100 bytes past the allocated
region (into skb_shared_info), which corrupts adjacent heap memory
and leads to a kernel panic.
Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to
derive the expected nodelen from the type field, and use it:
- in ioam6_iptunnel.c (send path, existing validation) to replace
the open-coded computation;
- in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose
nodelen is inconsistent with the type field, before any data is
written.
Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they
are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to
0xff1ffc00). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate user queue size constraints
Add validation to ensure user queue sizes meet hardware requirements:
- Size must be a power of two for efficient ring buffer wrapping
- Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations
This prevents invalid configurations that could lead to GPU faults or
unexpected behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: ring-buffer: Fix to check event length before using
Check the event length before adding it for accessing next index in
rb_read_data_buffer(). Since this function is used for validating
possibly broken ring buffers, the length of the event could be broken.
In that case, the new event (e + len) can point a wrong address.
To avoid invalid memory access at boot, check whether the length of
each event is in the possible range before using it. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 for Linux, UNIX and Windows (includes Db2 Connect Server) could allow an authenticated user to cause a denial of service due to improper neutralization of special elements in data query logic. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: pn533: bound the UART receive buffer
pn532_receive_buf() appends every incoming byte to dev->recv_skb and
only resets the buffer after pn532_uart_rx_is_frame() recognizes a
complete frame. A continuous stream of bytes without a valid PN532 frame
header therefore keeps growing the skb until skb_put_u8() hits the tail
limit.
Drop the accumulated partial frame once the fixed receive buffer is full
so malformed UART traffic cannot grow the skb past
PN532_UART_SKB_BUFF_LEN. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: me_daq: Fix potential overrun of firmware buffer
`me2600_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards. Although it checks that the supplied firmware is at least 16
bytes long, it does not check that it is long enough to contain the data
stream.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: validate ND option lengths in vxlan_na_create
vxlan_na_create() walks ND options according to option-provided
lengths. A malformed option can make the parser advance beyond the
computed option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check()
Reject rt match rules whose addrnr exceeds IP6T_RT_HOPS.
rt_mt6() expects addrnr to stay within the bounds of rtinfo->addrs[].
Validate addrnr during rule installation so malformed rules are rejected
before the match logic can use an out-of-range value. |
