| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Spring AI, having access to a shared environment can expose the ONNX model used by the application.
Affected versions:
Spring AI: 1.0.0 - 1.0.5 (fixed in 1.0.6), 1.1.0 - 1.1.4 (fixed in 1.1.5) |
| OpenClaw before 2026.3.31 contains a configuration management vulnerability where startup migration treats empty-array settings as missing values. Attackers can restart the application to rehydrate revoked Tlon configuration from file state, bypassing intended revocation controls. |
| The Aranda File Server (AFS) component in Aranda Software Aranda Service Desk before 8.3.12 stores daily activity logs with predictable names in a publicly accessible directory, which allows unauthenticated remote attackers to obtain direct virtual paths of uploaded files and bypass access controls to download sensitive documents containing PII. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nxp-nci: allow GPIOs to sleep
Allow the firmware and enable GPIOs to sleep.
This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.
-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 -- |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| OpenClaw before 2026.3.31 contains an authentication boundary vulnerability where Telegram legacy allowFrom migration incorrectly fans default-account trust into all named accounts. Attackers can exploit this trust propagation to bypass authentication controls and gain unauthorized access to named accounts. |
| A vulnerability was detected in Enter Software Iperius Backup up to 8.7.3. Affected is an unknown function of the file C:\ProgramData\IperiusBackup\Jobs\ of the component Backup Service. Performing a manipulation results in creation of temporary file with insecure permissions. The attack is only possible with local access. A high degree of complexity is needed for the attack. The exploitability is told to be difficult. The exploit is now public and may be used. Upgrading to version 8.7.4 is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix differential encoding verification
Differential encoding allows loops to be created if it is abused. To
prevent this the unpack should verify that a diff-encode chain
terminates.
Unfortunately the differential encode verification had two bugs.
1. it conflated states that had gone through check and already been
marked, with states that were currently being checked and marked.
This means that loops in the current chain being verified are treated
as a chain that has already been verified.
2. the order bailout on already checked states compared current chain
check iterators j,k instead of using the outer loop iterator i.
Meaning a step backwards in states in the current chain verification
was being mistaken for moving to an already verified state.
Move to a double mark scheme where already verified states get a
different mark, than the current chain being kept. This enables us
to also drop the backwards verification check that was the cause of
the second error as any already verified state is already marked. |
| In the Linux kernel, the following vulnerability has been resolved:
libie: don't unroll if fwlog isn't supported
The libie_fwlog_deinit() function can be called during driver unload
even when firmware logging was never properly initialized. This led to call
trace:
[ 148.576156] Oops: Oops: 0000 [#1] SMP NOPTI
[ 148.576167] CPU: 80 UID: 0 PID: 12843 Comm: rmmod Kdump: loaded Not tainted 6.17.0-rc7next-queue-3oct-01915-g06d79d51cf51 #1 PREEMPT(full)
[ 148.576177] Hardware name: HPE ProLiant DL385 Gen10 Plus/ProLiant DL385 Gen10 Plus, BIOS A42 07/18/2020
[ 148.576182] RIP: 0010:__dev_printk+0x16/0x70
[ 148.576196] Code: 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 55 41 54 49 89 d4 55 48 89 fd 53 48 85 f6 74 3c <4c> 8b 6e 50 48 89 f3 4d 85 ed 75 03 4c 8b 2e 48 89 df e8 f3 27 98
[ 148.576204] RSP: 0018:ffffd2fd7ea17a48 EFLAGS: 00010202
[ 148.576211] RAX: ffffd2fd7ea17aa0 RBX: ffff8eb288ae2000 RCX: 0000000000000000
[ 148.576217] RDX: ffffd2fd7ea17a70 RSI: 00000000000000c8 RDI: ffffffffb68d3d88
[ 148.576222] RBP: ffffffffb68d3d88 R08: 0000000000000000 R09: 0000000000000000
[ 148.576227] R10: 00000000000000c8 R11: ffff8eb2b1a49400 R12: ffffd2fd7ea17a70
[ 148.576231] R13: ffff8eb3141fb000 R14: ffffffffc1215b48 R15: ffffffffc1215bd8
[ 148.576236] FS: 00007f5666ba6740(0000) GS:ffff8eb2472b9000(0000) knlGS:0000000000000000
[ 148.576242] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 148.576247] CR2: 0000000000000118 CR3: 000000011ad17000 CR4: 0000000000350ef0
[ 148.576252] Call Trace:
[ 148.576258] <TASK>
[ 148.576269] _dev_warn+0x7c/0x96
[ 148.576290] libie_fwlog_deinit+0x112/0x117 [libie_fwlog]
[ 148.576303] ixgbe_remove+0x63/0x290 [ixgbe]
[ 148.576342] pci_device_remove+0x42/0xb0
[ 148.576354] device_release_driver_internal+0x19c/0x200
[ 148.576365] driver_detach+0x48/0x90
[ 148.576372] bus_remove_driver+0x6d/0xf0
[ 148.576383] pci_unregister_driver+0x2e/0xb0
[ 148.576393] ixgbe_exit_module+0x1c/0xd50 [ixgbe]
[ 148.576430] __do_sys_delete_module.isra.0+0x1bc/0x2e0
[ 148.576446] do_syscall_64+0x7f/0x980
It can be reproduced by trying to unload ixgbe driver in recovery mode.
Fix that by checking if fwlog is supported before doing unroll. |
| A flaw was found in Podman. In a Containerfile or Podman, data written to RUN --mount=type=bind mounts during the podman build is not discarded. This issue can lead to files created within the container appearing in the temporary build context directory on the host, leaving the created files accessible. |
| qemu-dm.debug in Xen 3.2.1 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/args temporary file. |
| (1) xenbaked and (2) xenmon.py in Xen 3.1 and earlier allow local users to truncate arbitrary files via a symlink attack on /tmp/xenq-shm. |
| The init script (sysstat.in) in sysstat 5.1.2 up to 7.1.6 creates /tmp/sysstat.run insecurely, which allows local users to execute arbitrary code. |
| Util/difflog.pl in zsh 4.3.4 allows local users to overwrite arbitrary files via a symlink attack on temporary files. |
| spell-check-logic.cgi in Moodle 1.8.2 allows local users to overwrite arbitrary files via a symlink attack on the (1) /tmp/spell-check-debug.log, (2) /tmp/spell-check-before, or (3) /tmp/spell-check-after temporary file. |
| sch2eaglepos.sh in geda-gnetlist 1.4.0 allows local users to overwrite arbitrary files via a symlink attack on a /tmp/##### temporary file. |
| The pserver_shutdown function in fence_egenera in cman 2.20080629 and 2.20080801 allows local users to overwrite arbitrary files via a symlink attack on the /tmp/eglog temporary file. |
| vcdiff in Emacs 20.7 to 22.1.50, when used with SCCS, allows local users to overwrite arbitrary files via a symlink attack on temporary files. |
| The configtest function in the Red Hat dhcpd init script for DHCP 3.0.1 in Red Hat Enterprise Linux (RHEL) 3 allows local users to overwrite arbitrary files via a symlink attack on an unspecified temporary file, related to the "dhcpd -t" command. |
| jhead.c in Matthias Wandel jhead 2.84 and earlier allows local users to overwrite arbitrary files via a symlink attack on a temporary file. |
