| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: unexport __init-annotated seg6_hmac_init()
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because the caller (net/ipv6/seg6.c)
and the callee (net/ipv6/seg6_hmac.c) belong to the same module.
It seems an internal function call in ipv6.ko. |
| In the Linux kernel, the following vulnerability has been resolved:
extcon: Modify extcon device to be created after driver data is set
Currently, someone can invoke the sysfs such as state_show()
intermittently before dev_set_drvdata() is done.
And it can be a cause of kernel Oops because of edev is Null at that time.
So modified the driver registration to after setting drviver data.
- Oops's backtrace.
Backtrace:
[<c067865c>] (state_show) from [<c05222e8>] (dev_attr_show)
[<c05222c0>] (dev_attr_show) from [<c02c66e0>] (sysfs_kf_seq_show)
[<c02c6648>] (sysfs_kf_seq_show) from [<c02c496c>] (kernfs_seq_show)
[<c02c4938>] (kernfs_seq_show) from [<c025e2a0>] (seq_read)
[<c025e11c>] (seq_read) from [<c02c50a0>] (kernfs_fop_read)
[<c02c5064>] (kernfs_fop_read) from [<c0231cac>] (__vfs_read)
[<c0231c5c>] (__vfs_read) from [<c0231ee0>] (vfs_read)
[<c0231e34>] (vfs_read) from [<c0232464>] (ksys_read)
[<c02323f0>] (ksys_read) from [<c02324fc>] (sys_read)
[<c02324e4>] (sys_read) from [<c00091d0>] (__sys_trace_return) |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix rq-qos breakage from skipping rq_qos_done_bio()
a647a524a467 ("block: don't call rq_qos_ops->done_bio if the bio isn't
tracked") made bio_endio() skip rq_qos_done_bio() if BIO_TRACKED is not set.
While this fixed a potential oops, it also broke blk-iocost by skipping the
done_bio callback for merged bios.
Before, whether a bio goes through rq_qos_throttle() or rq_qos_merge(),
rq_qos_done_bio() would be called on the bio on completion with BIO_TRACKED
distinguishing the former from the latter. rq_qos_done_bio() is not called
for bios which wenth through rq_qos_merge(). This royally confuses
blk-iocost as the merged bios never finish and are considered perpetually
in-flight.
One reliably reproducible failure mode is an intermediate cgroup geting
stuck active preventing its children from being activated due to the
leaf-only rule, leading to loss of control. The following is from
resctl-bench protection scenario which emulates isolating a web server like
workload from a memory bomb run on an iocost configuration which should
yield a reasonable level of protection.
# cat /sys/block/nvme2n1/device/model
Samsung SSD 970 PRO 512GB
# cat /sys/fs/cgroup/io.cost.model
259:0 ctrl=user model=linear rbps=834913556 rseqiops=93622 rrandiops=102913 wbps=618985353 wseqiops=72325 wrandiops=71025
# cat /sys/fs/cgroup/io.cost.qos
259:0 enable=1 ctrl=user rpct=95.00 rlat=18776 wpct=95.00 wlat=8897 min=60.00 max=100.00
# resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1
...
Memory Hog Summary
==================
IO Latency: R p50=242u:336u/2.5m p90=794u:1.4m/7.5m p99=2.7m:8.0m/62.5m max=8.0m:36.4m/350m
W p50=221u:323u/1.5m p90=709u:1.2m/5.5m p99=1.5m:2.5m/9.5m max=6.9m:35.9m/350m
Isolation and Request Latency Impact Distributions:
min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev
isol% 15.90 15.90 15.90 40.05 57.24 59.07 60.01 74.63 74.63 90.35 90.35 58.12 15.82
lat-imp% 0 0 0 0 0 4.55 14.68 15.54 233.5 548.1 548.1 53.88 143.6
Result: isol=58.12:15.82% lat_imp=53.88%:143.6 work_csv=100.0% missing=3.96%
The isolation result of 58.12% is close to what this device would show
without any IO control.
Fix it by introducing a new flag BIO_QOS_MERGED to mark merged bios and
calling rq_qos_done_bio() on them too. For consistency and clarity, rename
BIO_TRACKED to BIO_QOS_THROTTLED. The flag checks are moved into
rq_qos_done_bio() so that it's next to the code paths that set the flags.
With the patch applied, the above same benchmark shows:
# resctl-bench -m 29.6G -r out.json run protection::scenario=mem-hog,loops=1
...
Memory Hog Summary
==================
IO Latency: R p50=123u:84.4u/985u p90=322u:256u/2.5m p99=1.6m:1.4m/9.5m max=11.1m:36.0m/350m
W p50=429u:274u/995u p90=1.7m:1.3m/4.5m p99=3.4m:2.7m/11.5m max=7.9m:5.9m/26.5m
Isolation and Request Latency Impact Distributions:
min p01 p05 p10 p25 p50 p75 p90 p95 p99 max mean stdev
isol% 84.91 84.91 89.51 90.73 92.31 94.49 96.36 98.04 98.71 100.0 100.0 94.42 2.81
lat-imp% 0 0 0 0 0 2.81 5.73 11.11 13.92 17.53 22.61 4.10 4.68
Result: isol=94.42:2.81% lat_imp=4.10%:4.68 work_csv=58.34% missing=0% |
| In the Linux kernel, the following vulnerability has been resolved:
dax: make sure inodes are flushed before destroy cache
A bug can be triggered by following command
$ modprobe nd_pmem && modprobe -r nd_pmem
[ 10.060014] BUG dax_cache (Not tainted): Objects remaining in dax_cache on __kmem_cache_shutdown()
[ 10.060938] Slab 0x0000000085b729ac objects=9 used=1 fp=0x000000004f5ae469 flags=0x200000000010200(slab|head|node)
[ 10.062433] Call Trace:
[ 10.062673] dump_stack_lvl+0x34/0x44
[ 10.062865] slab_err+0x90/0xd0
[ 10.063619] __kmem_cache_shutdown+0x13b/0x2f0
[ 10.063848] kmem_cache_destroy+0x4a/0x110
[ 10.064058] __x64_sys_delete_module+0x265/0x300
This is caused by dax_fs_exit() not flushing inodes before destroy cache.
To fix this issue, call rcu_barrier() before destroy cache. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix more uncharged while msg has more_data
In tcp_bpf_send_verdict(), if msg has more data after
tcp_bpf_sendmsg_redir():
tcp_bpf_send_verdict()
tosend = msg->sg.size //msg->sg.size = 22220
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(22220) sk->sk_forward_alloc
tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000
goto more_data;
tosend = msg->sg.size //msg->sg.size = 11000
case __SK_REDIRECT:
sk_msg_return() //uncharged msg->sg.size(11000) to sk->sk_forward_alloc
The msg->sg.size(11000) has been uncharged twice, to fix we can charge the
remaining msg->sg.size before goto more data.
This issue can cause the following info:
WARNING: CPU: 0 PID: 9860 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0
Call Trace:
<TASK>
inet_csk_destroy_sock+0x55/0x110
__tcp_close+0x279/0x470
tcp_close+0x1f/0x60
inet_release+0x3f/0x80
__sock_release+0x3d/0xb0
sock_close+0x11/0x20
__fput+0x92/0x250
task_work_run+0x6a/0xa0
do_exit+0x33b/0xb60
do_group_exit+0x2f/0xa0
get_signal+0xb6/0x950
arch_do_signal_or_restart+0xac/0x2a0
? vfs_write+0x237/0x290
exit_to_user_mode_prepare+0xa9/0x200
syscall_exit_to_user_mode+0x12/0x30
do_syscall_64+0x46/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260
Call Trace:
<TASK>
__sk_destruct+0x24/0x1f0
sk_psock_destroy+0x19b/0x1c0
process_one_work+0x1b3/0x3c0
worker_thread+0x30/0x350
? process_one_work+0x3c0/0x3c0
kthread+0xe6/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: Fix crash due to tcp_tsorted_anchor was initialized before release skb
Got crash when doing pressure test of mptcp:
===========================================================================
dst_release: dst:ffffa06ce6e5c058 refcnt:-1
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle kernel paging request at ffffa06ce6e5c058
PGD 190a01067 P4D 190a01067 PUD 43fffb067 PMD 22e403063 PTE 8000000226e5c063
Oops: 0011 [#1] SMP PTI
CPU: 7 PID: 7823 Comm: kworker/7:0 Kdump: loaded Tainted: G E
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.2.1 04/01/2014
Call Trace:
? skb_release_head_state+0x68/0x100
? skb_release_all+0xe/0x30
? kfree_skb+0x32/0xa0
? mptcp_sendmsg_frag+0x57e/0x750
? __mptcp_retrans+0x21b/0x3c0
? __switch_to_asm+0x35/0x70
? mptcp_worker+0x25e/0x320
? process_one_work+0x1a7/0x360
? worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
? kthread+0x112/0x130
? kthread_flush_work_fn+0x10/0x10
? ret_from_fork+0x35/0x40
===========================================================================
In __mptcp_alloc_tx_skb skb was allocated and skb->tcp_tsorted_anchor will
be initialized, in under memory pressure situation sk_wmem_schedule will
return false and then kfree_skb. In this case skb->_skb_refdst is not null
because_skb_refdst and tcp_tsorted_anchor are stored in the same mem, and
kfree_skb will try to release dst and cause crash. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix premature hw access after PCI error
After a recoverable PCI error has been detected and recovered, qla driver
needs to check to see if the error condition still persist and/or wait
for the OS to give the resume signal.
Sep 8 22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440
qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx]
Sep 8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60
[qla2xxx]
Sep 8 22:26:03 localhost kernel: Call Trace:
Sep 8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0 [qla2xxx]
Sep 8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160
[qla2xxx]
Sep 8 22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx]
Sep 8 22:26:03 localhost kernel: ? qla2xxx_pci_mmio_enabled+0xfb/0x120
[qla2xxx]
Sep 8 22:26:03 localhost kernel: ? report_mmio_enabled+0x44/0x80
Sep 8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80
Sep 8 22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90
Sep 8 22:26:03 localhost kernel: ? aer_dev_correctable_show+0xc0/0xc0
Sep 8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240
Sep 8 22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0
Sep 8 22:26:03 localhost kernel: ? process_one_work+0x1a7/0x360
..
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected PCI
disconnect.
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22:
qla27xx_fwdt_entry_t262: dump ram MB failed. Area 5h start 198013h end 198013h
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: Unable to
capture FW dump
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-1015:22: cmd=0x0,
waited 5221 msecs
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-680d:22: mmio
enabled returning.
Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-d04c:22: MBX
Command timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5
mb[0-3]=[0xffff 0xffff 0xffff 0xffff] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Free irq vectors in order for v3 HW
If the driver probe fails to request the channel IRQ or fatal IRQ, the
driver will free the IRQ vectors before freeing the IRQs in free_irq(),
and this will cause a kernel BUG like this:
------------[ cut here ]------------
kernel BUG at drivers/pci/msi.c:369!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Call trace:
free_msi_irqs+0x118/0x13c
pci_disable_msi+0xfc/0x120
pci_free_irq_vectors+0x24/0x3c
hisi_sas_v3_probe+0x360/0x9d0 [hisi_sas_v3_hw]
local_pci_probe+0x44/0xb0
work_for_cpu_fn+0x20/0x34
process_one_work+0x1d0/0x340
worker_thread+0x2e0/0x460
kthread+0x180/0x190
ret_from_fork+0x10/0x20
---[ end trace b88990335b610c11 ]---
So we use devm_add_action() to control the order in which we free the
vectors. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3: Fix GICR_CTLR.RWP polling
It turns out that our polling of RWP is totally wrong when checking
for it in the redistributors, as we test the *distributor* bit index,
whereas it is a different bit number in the RDs... Oopsie boo.
This is embarassing. Not only because it is wrong, but also because
it took *8 years* to notice the blunder...
Just fix the damn thing. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: unmark inode in use in error path
Unmark inode in use if error encountered. If the in-use flag leakage
occurs in cachefiles_open_file(), Cachefiles will complain "Inode
already in use" when later another cookie with the same index key is
looked up.
If the in-use flag leakage occurs in cachefiles_create_tmpfile(), though
the "Inode already in use" warning won't be triggered, fix the leakage
anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/plane: Move range check for format_count earlier
While the check for format_count > 64 in __drm_universal_plane_init()
shouldn't be hit (it's a WARN_ON), in its current position it will then
leak the plane->format_types array and fail to call
drm_mode_object_unregister() leaking the modeset identifier. Move it to
the start of the function to avoid allocating those resources in the
first place. |
| In updateState of GraphicsDriverEnableAngleAsSystemDriverController.java, there is a possible persistent dos issue due to an unusual root cause. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple functions of ubsan_throwing_runtime.cpp, there is a possible way to cause a permanent denial of service due to a logic error in the code. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Database Server). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools as well as unauthorized update, insert or delete access to some of PeopleSoft Enterprise PeopleTools accessible data and unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 7.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:H). |
| Vulnerability in the Oracle Payroll product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Payroll. Successful attacks of this vulnerability can result in takeover of Oracle Payroll. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Payroll product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Payroll. Successful attacks of this vulnerability can result in takeover of Oracle Payroll. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Payroll product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Payroll. Successful attacks of this vulnerability can result in takeover of Oracle Payroll. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Porting). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where PeopleSoft Enterprise PeopleTools executes to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools as well as unauthorized update, insert or delete access to some of PeopleSoft Enterprise PeopleTools accessible data and unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 6.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:H). |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Analytic Server). Supported versions that are affected are 8.61-8.63. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H). |
| A JNDI Injection vulnerability has been discovered in Apache CXF's JCA integration module, which can allow for code execution, if an attacker is able to manipulate the JCA deployment descriptor (ra.xml) or runtime activation parameters. Users are recommended to upgrade to versions 4.2.2 or 4.1.7 or 3.6.12, which fixes this issue. |
