| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix node refcount leak on ctrl packet alloc failure
qrtr_send_resume_tx() calls qrtr_node_lookup() which takes a
reference on the returned node. If the subsequent call to
qrtr_alloc_ctrl_packet() fails due to memory allocation failure, the
function returns -ENOMEM without calling qrtr_node_release() to
release the node reference.
Add qrtr_node_release(node) before returning on the allocation failure
path to properly release the reference. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/ftrace: Fix WARNING in __unregister_ftrace_function
perf_ftrace_function_unregister() unconditionally calls
unregister_ftrace_function() without checking whether the ftrace_ops
was ever successfully registered. This triggers a WARN_ON in
__unregister_ftrace_function() when the ops doesn't have
FTRACE_OPS_FL_ENABLED set.
This can happen during perf_event_alloc() error cleanup when
perf_trace_destroy() is called via __free_event() on an event whose
ftrace_ops registration failed or was already torn down by
perf_try_init_event()'s err_destroy path.
The call path is:
perf_event_alloc() error cleanup
-> __free_event()
-> event->destroy() [tp_perf_event_destroy]
-> perf_trace_destroy()
-> perf_trace_event_close()
-> TRACE_REG_PERF_CLOSE
-> perf_ftrace_function_unregister()
-> unregister_ftrace_function()
-> __unregister_ftrace_function()
-> WARN_ON(!(ops->flags & FTRACE_OPS_FL_ENABLED))
Fix this by checking FTRACE_OPS_FL_ENABLED before attempting to
unregister. If the ops is not enabled, just free the filter and
return success. |
| In the Linux kernel, the following vulnerability has been resolved:
usbip: vhci_hcd: fix NULL deref in status_show_vhci
platform_get_drvdata() can return NULL if a VHCI host controller's
probe failed (e.g. due to USB bus number exhaustion). status_show_vhci()
checked for a NULL pdev but not for a NULL hcd returned by
platform_get_drvdata(). Passing NULL to hcd_to_vhci_hcd() does not
return NULL - it returns a pointer offset of 0x260, causing a NULL
pointer dereference when that value is subsequently dereferenced.
Add a NULL check on hcd before calling hcd_to_vhci_hcd(). Move
status_show_not_ready() above status_show_vhci() to make it callable
from the new error path without a forward declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
In case reconfiguration of NAN fails, we call
ieee80211_handle_reconfig_failure, that marks all interfaces as not in
the driver.
Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces
is called to destroy all the interfaces.
If we have any other interface but the NAN one, for example a BSS
station, then when its state (links, stations) will be removed, we
won't tell the driver about this, because we will think that the
interfaces are not in the driver, and then drivers might remain with
dangling pointers to objects like stations and links (at least for
iwlwifi this is the case).
ieee80211_handle_reconfig_failure is meant to be called after we cleaned
up the state in the driver, there is no reason to call it for NAN
reconfiguration failure.
Fix the code to just warn in such a case, as we do in other error paths
in reconfig where it is too complicated to rewind. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix Reports from Kernel Lock Validator
handle_dynamic_resolution change requires that the state_lock be acquired
based on the lockdep_assert_held. However, the
handle_dynamic_resolution_change call in initialize_sequence does not
properly obtain the lock before calling.
Since the v4l2_ctrl_find and s_ctrl can sleep, they should not be called
while a lock is already held. Store off the fbc_buf_count then properly
update control once lock has been freed. |
| An out-of-bounds read in libXi's XListInputDevices() class parsing in libXi before 1.8.4 could be used by malicious X servers to crash an attached X client. |
| SumatraPDF 3.6.1 contains an integer overflow vulnerability in EngineMupdf::BuildPageLabelRec() when parsing PDF PageLabels /Nums entries. |
| tinyauth before 5.1.3 allows rule bypass by appending an allowed route string. This is caused by an unanchored regular expression. |
| In the Linux kernel, the following vulnerability has been resolved:
netconsole: take target_cleanup_list_lock in drop_netconsole_target()
drop_netconsole_target() unlinks the target while only holding
target_list_lock. However, when the underlying interface has been
unregistered, netconsole_netdev_event() moves the target from
target_list to target_cleanup_list, and netconsole_process_cleanups_core()
walks that list under target_cleanup_list_lock only.
If a user removes the configfs target at the same time the cleanup
worker is iterating target_cleanup_list, list_del() can corrupt the list
because the two paths take disjoint locks while operating on the same
list node.
Acquire target_cleanup_list_lock around the list_del() so the unlink is
serialised against netconsole_process_cleanups_core() regardless of
which list the target currently belongs to. The state transition that
downgrades STATE_DEACTIVATED to STATE_DISABLED is left intact and is
performed under the same combined locking, preserving the existing
ordering with resume_target(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8365-afe-pcm: fix possible NULL-pointer dereferences in mt8365_afe_suspend()
mt8365_afe_suspend() allocates the register backup buffer with
devm_kcalloc(), but does not check for allocation failure before using the
returned pointer. This may lead to a NULL pointer dereference when
accessing afe->reg_back_up[i].
Add the missing NULL check and return -ENOMEM on allocation failure after
disabling the main clock.
Also propagate the return value of mt8365_afe_suspend() in
mt8365_afe_dev_runtime_suspend() so that the suspended state is not updated
when suspend fails. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: NUL-terminate replaced sysctl value
When writing to sysctls, proc_sys_call_handler() guarantees that the
buffer passed to proc handlers is NUL-terminated. If
bpf_sysctl_set_new_value() replaces the pending sysctl value, it can
hand a replacement buffer directly to proc handlers. However, the
helper currently copies only buf_len bytes into that buffer without
appending a NUL terminator, leaving downstream parsers vulnerable to
out-of-bounds access.
Fix this by appending a '\0' after the replaced value to restore the
expected sysctl semantics. Since the helper already rejects buf_len
greater than PAGE_SIZE - 1, there is always room for the extra byte.
Reproduced in a QEMU x86_64 guest booted with KASAN while exercising
the sysctl replacement path with a cgroup/sysctl BPF program. The
reproducer targets `/proc/sys/net/core/flow_limit_cpu_bitmap`, fills
the original user write buffer with non-zero bytes, and overrides the
sysctl value so the replacement buffer lacks a terminating NUL. Under
that setup, the pre-fix kernel reported:
BUG: KASAN: slab-out-of-bounds in strnchrnul+0x72/0x90
Read of size 1 at addr ffff88800de57000 by task repro_patch3/66
CPU: 0 UID: 0 PID: 66 Comm: repro_patch3 Not tainted 7.1.0-rc3-00269-g8370ca1f87cc #6 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
print_report+0xcb/0x5e0
? __virt_addr_valid+0x21d/0x3f0
? strnchrnul+0x72/0x90
? strnchrnul+0x72/0x90
kasan_report+0xca/0x100
? strnchrnul+0x72/0x90
strnchrnul+0x72/0x90
bitmap_parse+0x37/0x2e0
flow_limit_cpu_sysctl+0xc6/0x840
? __pfx_flow_limit_cpu_sysctl+0x10/0x10
? __kvmalloc_node_noprof+0x5ba/0x870
proc_sys_call_handler+0x31d/0x480
? __pfx_proc_sys_call_handler+0x10/0x10
? selinux_file_permission+0x39f/0x500
? lock_is_held_type+0x9e/0x120
vfs_write+0x98e/0x1000
...
</TASK>
The buggy address is located 0 bytes to the right of
allocated 4096-byte region [ffff88800de56000, ffff88800de57000)
With this fix applied, rerunning the same sysctl-targeted path yields
no corresponding KASAN reports. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: rework FDB management on the bridge leave path
On bridge leave, the dpaa2_switch_port_set_fdb() function always
allocates a new FDB for the port which is becoming standalone. In case
no FDB is found, then the port leaving a bridge will continue to use the
current one.
The above logic does not cover the case in which there are multiple
bridges which have ports from the same DPSW instance. In this case, when
the last port leaves bridge #1, it finds an unused FDB to switch to, but
the old FDB is not marked as unused. Since the number of FDBs is equal
to the number of DPSW interfaces, this will eventually lead to multiple
ports sharing the same FDB.
Fix this by changing how we are managing the FDBs on the leave path.
Instead of directly allocating a new FDB, first verify if the current
port is the last one to leave a bridge. If this is the case, then
continue to use the current FDB and only allocate another FDB if there
are other ports remaining in the bridge. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Add package limit checks in parser functions
Add package limit checks in parser functions to prevent out-of-bounds
access. |
| In the Linux kernel, the following vulnerability has been resolved:
hpfs: handle set_blocksize failures
hpfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate and share PSP fw_pri_buf copies via psp_copy_fw
Change psp_copy_fw from void to int: return -ENODEV when drm_dev_enter
fails, and -EINVAL when the image size is zero or larger than the
1 MiB PSP private buffer.
Replace open-coded memset/memcpy into fw_pri_buf with psp_copy_fw. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store()
Currently, the __resource_resize_store() allows writing to the
resourceN_resize sysfs attribute to change a BAR's size without checking
for capabilities, currently relying only on the file access check.
Resizing a BAR modifies PCI device configuration and can disrupt active
drivers. After the upcoming conversion to static attributes, it will also
trigger resource file updates via sysfs_update_groups().
Add a CAP_SYS_ADMIN check to prevent unprivileged users from performing BAR
resize operations. |
| IRONMACE Ironshield 1.0.0.167 has a tvk.sys kernel-mode driver that authenticates client executables by checking for expected publisher and root-certificate strings in WIN_CERTIFICATE data ("IRONMACE Co., Ltd." and "DigiCert Trusted Root G4") instead of parsing and validating the PKCS signature data. As a result, a local unprivileged attacker may bypass this via crafted certificate data and obtain access to privileged IOCTL functionality. |
| A flaw was found in CRI-O. The fix for a previous vulnerability (CVE-2022-4318) was incorrect, allowing it to be bypassed. An attacker capable of setting environment variables on a container can inject a newline character into the HOME environment variable. This issue allows the addition of arbitrary lines into /etc/passwd by use of a specially crafted environment variable. |
| Lemonldap::NG::Portal versions from 2.23.0 before 2.23.4 for Perl allow a PKCE bypass for public Relying Parties in "PKCE or secret" mode because checkEndPointAuthenticationCredentials does not verify the client secret.
With oidcRPMetaDataOptionsRequirePKCE set to 2, the authorization endpoint issues a code even when the request carries no code_challenge, and token() admits the exchange as long as a challenge was stored or an authentication method was returned for the caller. checkEndPointAuthenticationCredentials() skips the secret comparison for a Relying Party marked public and still returns the method deduced from the request, so any Basic or form credential satisfies the secret branch. validatePKCEChallenge() then passes, because neither a challenge nor a verifier is present.
An attacker who intercepts an authorization code issued to a public Relying Party can exchange it for the user's access, ID and refresh tokens by replaying the client_id with an arbitrary secret, which is the attack PKCE prevents. Dynamic client registration creates every Relying Party in this mode. |
| Lemonldap::NG::Portal versions from 2.20.0 before 2.21.6, from 2.22.0 before 2.23.4 for Perl allow unauthenticated OAuth2 token introspection because checkEndPointAuthenticationCredentials does not verify the client secret of a public Relying Party.
checkEndPointAuthenticationCredentials() skips the secret comparison for a Relying Party marked public and still returns the authentication method deduced from the request, client_secret_basic or client_secret_post. introspection() rejects a caller only when that method is missing or none, so a request carrying a public client_id and an arbitrary or empty secret passes the endpoint's authentication check.
An attacker who holds an access token and knows the client_id of any public Relying Party can confirm the token is active and read its metadata, including scope, audience, expiry and the sub claim. The sub claim is computed with the calling Relying Party's user identifier attribute, so an attacker can translate a user identifier from one Relying Party to another, defeating per-client and pseudonymous identifiers. |
