| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Generic IO & Memory Access driver for PCs provided by TOSHIBA CORPORATION and Dynabook Inc. exposes its IOCTL with insufficient access control. A logged-in user with no administrative privilege may access physical memory. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush
On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and
flushes every fragment queue that is not yet complete using
inet_frag_queue_flush(). That helper frees all the skbs queued on the
fragment queue but does not set INET_FRAG_COMPLETE, and leaves
q->fragments_tail and q->last_run_head pointing at the freed skbs.
The queue itself stays in the rhashtable.
fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups,
but it cannot stop a fragment that already obtained the queue through
inet_frag_find() earlier and stalled just before taking the queue lock.
Once that fragment resumes after the flush and takes the queue lock,
it passes the INET_FRAG_COMPLETE check and then dereferences the freed
fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of
that pointer and, on the append path, writes ->next_frag, causing a
slab use-after-free. IPv6, nf_conntrack_reasm6 and 6lowpan reassembly
share the same flush path and are affected as well.
Reset rb_fragments, fragments_tail and last_run_head in
inet_frag_queue_flush() so a flushed queue no longer points at the
freed skbs. A fragment that resumes after the flush and takes the
queue lock then finds an empty queue and starts a new run instead of
dereferencing the freed fragments_tail. ip_frag_reinit() already
performed this reset after its own flush, so drop the now duplicate
code there. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add buffer overflow check in MS get_info_ioctl
Add validation that the info size returned from the metric stream info
query is not exceeded when checked against the allocated buffer size.
If the firmware returns a size larger than the buffer, reject the
operation with -EOVERFLOW instead of proceeding with an incorrect
buffer copy. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-rsu: Fix NULL deref on rsu_send_msg() timeout in probe
rsu_send_msg() can return -ETIMEDOUT when
wait_for_completion_interruptible_timeout() fires while the SMC call is still
pending. In stratix10_rsu_probe(), the error paths for COMMAND_RSU_DCMF_VERSION,
COMMAND_RSU_DCMF_STATUS, COMMAND_RSU_MAX_RETRY and COMMAND_RSU_GET_SPT_TABLE
call stratix10_svc_free_channel() - which sets chan->scl to NULL - but then
fall through and queue the next request on the same channel. The next svc
kthread that runs will dereference pdata->chan->scl in its receive callback
path, triggering a NULL pointer dereference identical to the one fixed by
commit c45f7263100c ("firmware: stratix10-rsu: Fix NULL pointer dereference
when RSU is disabled") for the COMMAND_RSU_STATUS path.
Apply the same cleanup pattern to the remaining failure paths: remove the
async client, free the channel, and return early so no further messages are
queued on a channel whose scl has been cleared.
While at it, clean up stratix10_rsu_probe() in two ways without changing
behavior:
- Drop redundant zero-initialization of fields already cleared by
devm_kzalloc(): client.receive_cb, status.* and spt0/1_address
(INVALID_SPT_ADDRESS is 0x0).
- Replace five identical 3-line error-cleanup blocks
(stratix10_svc_remove_async_client() + stratix10_svc_free_channel() +
return ret) with goto labels (remove_async_client, free_channel),
matching the standard kernel resource-unwinding pattern and making it
easier to extend the probe sequence without forgetting matching
cleanup.
Also move init_completion() next to mutex_init() so sync-primitive
initialization is grouped before anything that could trigger a
callback.
---
v2: Add a minor clean-up of the function stratix10_rsu_probe() to have a
centralize exit for all the rsu_send_async_msg() and rsu_send_msg(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: guard timestamp cmsgs to real error queue skbs
skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb
from sk_error_queue. That assumption is not true for AF_PACKET sockets:
outgoing packet taps are also delivered to packet sockets with
skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET
instead of struct sock_exterr_skb.
If such an skb is received with timestamping enabled, the generic
timestamp cmsg path can read AF_PACKET control-buffer state as
sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop
counter overlaps opt_stats. An odd drop count makes the path emit
SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear
skbs this copies past the linear head and can trigger hardened usercopy or
disclose adjacent heap contents.
Keep skb_is_err_queue() local to net/socket.c, but make it verify that
the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor
installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal
receive ownership and no longer pass as error-queue skbs, while legitimate
sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free
ownership. |
| Cacti is an open source performance and fault management framework. Versions 1.2.30 and prior are vulnerable to Reflected XSS via tab parameter in the auth_profile.php JavaScript context. This issue has been fixed in version 1.2.31. |
| The Gutenberg Essential Blocks – Page Builder for Gutenberg Blocks & Patterns plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'configurablePrefix' Block Attribute in all versions up to, and including, 6.1.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A vulnerability in Apache Kvrocks.
This issue affects Apache Kvrocks: from 2.6.0 through 2.15.0.
Users are recommended to upgrade to version 2.16.0, which fixes the issue. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.10 before 18.11.6, 19.0 before 19.0.3, and 19.1 before 19.1.1 that under certain conditions could have allowed an unauthenticated user to execute arbitrary JavaScript in a user's browser session due to improper path validation under certain conditions. |
| The Gravity Forms Booking plugin for WordPress is vulnerable to time-based SQL Injection via the ‘staff_id’ parameter in all versions up to, and including, 2.7.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| Authorization Bypass Through User-Controlled SQL Primary Key vulnerability in DATABASE Software Training Consulting Ltd. Databank Accreditation Software allows SQL Injection.
This issue affects Databank Accreditation Software: before 2026/04. |
| OS Command Injection vulnerability in Rapid7 InsightConnect Finger Plugin on Linux allows authenticated attackers to execute arbitrary OS commands via the user or host parameters due to insufficient input validation in shell command construction. |
| OS Command Injection vulnerability in the TR action of Rapid7 InsightConnect Translate Plugin on Linux allows remote attackers to execute arbitrary OS commands via the text or expression parameters due to insufficient input sanitization in shell command construction. |
| OS Command Injection vulnerability in the ping action of Rapid7 InsightConnect Ping Plugin on Linux allows remote attackers to execute arbitrary OS commands via the host parameter due to insufficient input validation when constructing shell commands. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Bound root directory content to block size
__tb_property_parse_dir() does not check that content_offset +
content_len fits within block_len for the root directory case.
When rootdir->length equals or exceeds block_len - 2, the entry
loop reads past the allocated property block.
Add a bounds check after computing content_offset and content_len
to reject directories whose content extends past the block. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Reject zero-length property entries in validator
tb_property_entry_valid() accepts entries with length == 0 for
DIRECTORY, DATA, and TEXT types. A zero-length TEXT entry passes
validation but causes an underflow in the null-termination logic:
property->value.text[property->length * 4 - 1] = '\0';
When property->length is 0 this writes to offset -1 relative to
the allocation.
Reject zero-length entries early in the validator since they have no
valid representation in the XDomain property protocol. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix the ACK parser to extract the SACK table for parsing
Fix modification of the received skbuff in rxrpc_input_soft_acks() and a
potential incorrect access of the buffer in a fragmented UDP packet (the
packet would probably have to be deliberately pre-generated as fragmented)
when AF_RXRPC tries to extract the contents of the SACK table by copying
out the contents of the SACK table into a buffer before attempting to parse
AF_RXRPC assumes that it can just call skb_condense() and then validly
access the SACK table from skb->data and that it will be a flat buffer -
but skb_condense() can silently fail to do anything under some
circumstances.
Note that whilst rxrpc_input_soft_acks() should be able to parse extended
ACKs, the rest of AF_RXRPC doesn't currently support that.
Further, there's then no need to call skb_condense() in rxrpc_input_ack(),
so don't. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/list_lru: drain before clearing xarray entry on reparent
memcg_reparent_list_lrus() clears the dying memcg's xarray entry with
xas_store(&xas, NULL) before reparenting its per-node lists into the
parent. This opens a window where a concurrent list_lru_del() arriving
for the dying memcg sees xa_load() == NULL, walks to the parent in
lock_list_lru_of_memcg(), takes the parent's per-node lock, and calls
list_del_init() on an item still physically linked on the dying memcg's
list.
If another in-flight thread holds the dying memcg's per-node lock at the
same moment (another list_lru_del, or a list_lru_walk_one running an
isolate callback), both threads modify ->next/->prev pointers on the same
physical list under different locks. Adjacent items can corrupt each
other's links.
Fix it by reversing the order: reparent each per-node list and mark the
child's list lru dead and then clear the xarray entry. Any concurrent
list_lru op that finds the still-set xarray entry either takes the dying
memcg's per-node lock (synchronizing with the drain) or sees LONG_MIN and
walks to the parent, where the items now live. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phonet: free phonet_device after RCU grace period
phonet_device_destroy() removes a phonet_device from the per-net device
list with list_del_rcu(), but frees it immediately. RCU readers walking
the same list can still hold a pointer to the object after it has been
removed, leading to a slab-use-after-free.
Use kfree_rcu(), matching the lifetime rule already used by
phonet_address_del() for the same object type. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Fix NULL pointer dereference in rpmsg callback
A NULL pointer dereference was observed on Hawi at boot when the DSP
sends a glink message before fastrpc_rpmsg_probe() has completed
initialization:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178
pc : _raw_spin_lock_irqsave+0x34/0x8c
lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc]
...
Call trace:
_raw_spin_lock_irqsave+0x34/0x8c (P)
fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc]
qcom_glink_native_rx+0x538/0x6a4
qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem]
The faulting address 0x178 corresponds to the lock variable inside
struct fastrpc_channel_ctx, confirming that cctx is NULL when
fastrpc_rpmsg_callback() attempts to take the spinlock.
There are two issues here. First, dev_set_drvdata() is called before
spin_lock_init() and idr_init(), leaving a window where the callback
can retrieve a valid cctx pointer but operate on an uninitialized
spinlock. Second, the rpmsg channel becomes live as soon as the driver
is bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata()
is called at all, resulting in dev_get_drvdata() returning NULL.
Fix both issues by moving all cctx initialization ahead of
dev_set_drvdata() so the structure is fully initialized before it
becomes visible to the callback, and add a NULL check in
fastrpc_rpmsg_callback() as a guard against any remaining window. |
