| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
When the device is enumerated through its ACPI HID (IFX3100),
i2c_client_get_device_id() returns NULL: the ACPI-derived client name
does not match the driver's i2c_device_id table. dps310_probe() then
dereferences that NULL pointer in "iio->name = id->name" and crashes the
kernel during probe.
The IIO device name is always "dps310", so set it directly and drop the
now-unused device-id lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: dma-heap: don't publish fd before copy_to_user() succeeds
DMA_HEAP_IOCTL_ALLOC allocates a dma-buf and installs an fd into the
caller's fd table via dma_buf_fd() -> fd_install() before
dma_heap_ioctl() copies the result back to userspace. If the trailing
copy_to_user() fails, userspace never learns the fd number, but the
fd (and the underlying dma-buf reference) are already visible to
other threads in the same process and are leaked for the lifetime of
the process.
The obvious "close it on the failure path" fix is unsafe: once
fd_install() has run, another thread can already dup() the fd, send
it via SCM_RIGHTS, or close() it and let its number be reused, so a
subsequent close_fd() from the ioctl path can operate on an unrelated
file. This was pointed out by Christian König on v1 [1].
Restructure the allocation path so that fd_install() is the last,
unfailable step of a successful ioctl:
1. heap->ops->allocate() creates the dma_buf.
2. get_unused_fd_flags() reserves an fd number in the caller's
fd table without publishing it, so
no other thread can observe it.
3. copy_to_user() delivers the fd number to userspace;
on failure the fd is returned with
put_unused_fd() and the dma_buf
reference is dropped with
dma_buf_put(), leaving no user-
visible state behind.
4. dma_buf_fd_install() publishes the fd and emits the
trace_dma_buf_fd tracepoint -- from
here on the ioctl cannot fail.
A new dma_buf_fd_install() helper is introduced in dma-buf.c to wrap
fd_install() together with the DMA_BUF_TRACE() call, preserving the
export tracing that dma_buf_fd() provides. dma_heap_ioctl_allocate()
is refactored to return the struct dma_buf * directly (returning
ERR_PTR on failure) so the caller holds the dmabuf reference across
steps 3 and 4.
The failure at step 3 is easily reachable from userspace: pass a
struct dma_heap_allocation_data that lives in a page whose protection
is flipped to PROT_READ between copy_from_user() and copy_to_user()
(e.g. via mprotect()). Before this change each such ioctl leaks one
dmabuf fd; after it, the fd table is unchanged on failure and only
/dev/dma_heap/<name> remains open.
No UAPI or heap-driver interface change.
[1] https://lore.kernel.org/dri-devel/175e98de-f414-47d7-81c1-c0fe0a8f7f62@amd.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/wsse: handle damon_start() failure
Patch series "samples/damon: handle damon_{start,stop}() failures".
All DAMON sample modules are not correctly handling failures from
damon_start(). Among those, mtier also has an additional problem for
handling of damon_stop() failures. wsse and prcl also have a problem in
their damon_call() failure handling. As a result, memory leaks, next
DAMON operation disruptions, and use-after-free can happen. Fix those.
Note that only the damon_start() failure caused issues can reliably be
reproduced. Reproducing those issues require the admin permission,
though.
This patch (of 6):
damon_sample_wsse_start() callers assume it will clean up resources when
it fails. And the function does the cleanup for context buildup failures.
However, it is not doing the cleanup for damon_start() failure. As a
result, when damon_start() fails, it leaks the memory for DAMON context.
Free the context in case of the failure to fix the issues.
Note that the issue can reliably be reproduced because the module calls
damon_start() in the exclusive mode. For example,
$ sudo damo start
$ echo $$ | sudo tee /sys/module/damon_sample_wsse/parameters/target_pid
$ echo Y | sudo tee /sys/module/damon_sample_wsse/parameters/enabled
$ sudo cat /proc/allocinfo | grep damon_new_ctx
Because the first command is running another DAMON instance, the third
command fails the damon_start() call because the new DAMON instance cannot
exclusively run. And without this fix, by repeating the third and the
fourth commands above, we can show the memory consumption is only
increasing due to the leaks. It requires the sudo permission though.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: handle damon_stop() failure
damon_sample_mtier_stop() assumes its damon_stop() call will always
successfully stops the two DAMON contexts. Hence it deallocates the two
DAMON contexts after the damon_stop() call. However, if a given context
is already stopped, damon_stop() fails and returns an error while letting
the DAMON contexts that have not yet stopped keep running. This kind of
unexpected early DAMON context stops could happen due to memory allocation
failures in kdamond_fn(). Because damon_sample_mtier_stop() just
deallocates all DAMON contexts with damon_target and damon_region objects
that are linked to the contexts, the execution of the unstopped DAMON
context (kdamond) ends up using the memory that freed (use-after-free).
Fix the issue by separating the damon_stop() to be invoked per context.
Note that DAMON_SYSFS also allows multiple DAMON contexts execution. But,
it calls damon_stop() for each context one by one. Hence this issue is
only in mtier.
For the long term, it would be better to refactor damon_stop() to always
ensure stopping all contexts regardless of the failures in the middle.
Make this fix in the current way, though, to keep it simple and easy to
backport. I will do the refactoring later.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
rpcrdma: arm rn_done before publishing the notification
rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before
storing the caller's callback in rn->rn_done. The xarray makes @rn
reachable to rpcrdma_remove_one(), which walks rd_xa and invokes
rn->rn_done(rn) for every registered notification. A device removal
that races a fresh registration can therefore observe @rn with
rn_done still NULL, because the notification objects are zero
allocated by their owners, and call through a NULL function pointer.
Store rn->rn_done before xa_alloc() publishes @rn. The xarray's
store-side and load-side ordering then guarantees that any CPU which
finds @rn in rd_xa also observes the armed callback.
rpcrdma_rn_unregister() treats a non-NULL rn_done as the sentinel
for a completed registration, so the early store must not survive a
failed registration. Clear rn_done again when xa_alloc() fails.
Were it left set, the failed-accept cleanup path would call
rpcrdma_rn_unregister() on an @rn that was never inserted, erasing
an unrelated rd_xa slot and underflowing rd_kref. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry()
qla2x00_error_entry() reads ha->req_q_map[que] twice: once for the NULL
check and again when assigning it to req. The map slot is cleared by
qla25xx_free_req_que() (ha->req_q_map[que_id] = NULL under mq_lock)
during queue teardown, while the response-queue interrupt that drives
qla2x00_error_entry() is still registered (the IRQ is released later in
qla25xx_free_rsp_que()). If the slot is set to NULL between the two
reads, req becomes NULL and is dereferenced.
Read the slot once into req and NULL-check the local before use. mq_lock
is a mutex and cannot be taken from interrupt context, so the single
read plus local check is the appropriate fix for the reported NULL
dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: check MMIO mapping errors in probe
devm_platform_ioremap_resource() returns an error pointer when the register
resource cannot be mapped. ethosu_probe() stores it and continues until
initialization dereferences it through MMIO accessors.
Return the mapping error before initializing the device. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: storage: realtek_cr: fix use-after-free on disconnect
realtek_cr_destructor() calls timer_delete() before the chip containing
the timer is freed. The timer callback may still be running and can
rearm itself, resulting in a use-after-free.
Use timer_shutdown_sync() to wait for the callback and prevent further
rearming. Do this unconditionally because ss_en may be changed after
the timer is armed.
Move timer_setup() into init_realtek_cr() so the timer is initialized
before any failure path can invoke the destructor.
Found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped
Wire up a gmem_invalidate_range() call for SNP VMs, and use it to force
vCPUs to reload/recheck their guest-provided VMSA if the backing gmem
page is being invalidated, e.g. is being PUNCH_HOLE'd. Use the same core
logic to handle invalidations as VMX does for the APIC-access page, as the
two concepts are nearly identical: shove the physical address of a page
into the vCPU's control structure:
1. Snapshot the invalidation sequence counter
2. Grab the pfn (from guest_memfd in this case)
3. Acquire mmu_lock for read
4. Re-request reload if retry is needed, otherwise commit the change.
Note, the re-request action in #4 is necessary as KVM's retry logic is
fuzzy, i.e. can get false positives. If the guest_memfd page has been
dropped, at some point a subsequent reload will fail to get a PFN from
guest_memfd, and KVM will fail KVM_RUN. If the retry was due to a false
positive, KVM will retry until there are no relevant MMU notifier events
(and will retry in the "outer" loop, i.e. will drop locks and resched as
needed).
Note #2! Take care to invalidate the VMSA when a relevant memslot is
DELETED or MOVED, as invalidations in response to PUNCH_HOLE are predicated
on memslot bindings (KVM doesn't know what GFN range(s) to invalidate
without a binding). And more importantly, the VMSA mapping requires a
memslot, i.e. must be invalidated if its memslots disappears, regardless of
the state of the underlying guest_memfd inode.
Failure to invalidate the vCPU's control.vmsa_pa (which is checked by
pre_sev_run()) can prevent KVM from properly freeing the page as firmware
will reject the RMPUPDATE to reclaim the page with FAIL_INUSE if the vCPU
is actively running, i.e. if VMSA page is in-use. That in turn leads to an
RMP #PF on the next use, as the page will still be assigned to the SNP VM.
SEV-SNP: RMPUPDATE failed for PFN 78d198, pg_level: 1, ret: 3
SEV-SNP: PFN 0x78d198, RMP entry: [0xfff0000000144001 - 0x000000000000000f]
CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026
Call Trace:
<TASK>
dump_stack_lvl+0x54/0x70
rmpupdate+0x12c/0x140
rmp_make_shared+0x3b/0x60
sev_gmem_invalidate+0xe0/0x170 [kvm_amd]
delete_from_page_cache_batch+0x1d8/0x220
truncate_inode_pages_range+0x120/0x3d0
kvm_gmem_fallocate+0x19a/0x270 [kvm]
vfs_fallocate+0x1bc/0x1f0
__x64_sys_fallocate+0x48/0x70
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x496c7e
</TASK>
------------[ cut here ]------------
SEV: Failed to update RMP entry for PFN 0x78d198 error -14
WARNING: arch/x86/kvm/svm/sev.c:5160 at sev_gmem_invalidate+0x126/0x170 [kvm_amd], CPU#3: sev_snp_vmsa_pu/31345
CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026
RIP: 0010:sev_gmem_invalidate+0x12b/0x170 [kvm_amd]
Call Trace:
<TASK>
delete_from_page_cache_batch+0x1d8/0x220
truncate_inode_pages_range+0x120/0x3d0
kvm_gmem_fallocate+0x19a/0x270 [kvm]
vfs_fallocate+0x1bc/0x1f0
__x64_sys_fallocate+0x48/0x70
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x496c7e
</TASK>
irq event stamp: 20689
hardirqs last enabled at (20699): [<ffffffff8e76092c>] __console_unlock+0x5c/0x60
hardirqs last disabled at (20708): [<ffffffff8e760911>] __console_unlock+0x41/0x60
softirqs last enabled at (20722): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140
softirqs last disabled at (20717): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140
---[ end trace 0000000000000000 ]---
BUG: unable to handle page fault for address: ffff99
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix debugfs UAF on adapter removal
i2c_del_adapter() frees the adapter's debugfs directory before it
unregisters the adapter device, but the new_device sysfs attribute
stays writable until device_del(). A write racing with removal still
reaches i2c_device_probe(), which passes the freed adap->debugfs to
debugfs_create_dir() as the new client's parent:
BUG: KASAN: slab-use-after-free in lookup_noperm_common+0x407/0x430
Read of size 4 at addr ffff88803ef87810 by task syz.0.61/6090
lookup_noperm_common+0x407/0x430
simple_start_creating+0x9c/0x110
debugfs_start_creating+0xdb/0x1a0
debugfs_create_dir+0x24/0x350
i2c_device_probe+0x814/0xbf0
It's technically possible to create a client after i2c_deregister_clients
has run. That client will never be unregistered and make
wait_for_completion hang.
Close the window by removing the new_device attribute at the start of
i2c_del_adapter(). device_remove_file() will drain any clients left. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs
A null-pointer dereference occurs in f_midi2_free_ep_reqs() when attempting
to clean up an endpoint that was never initialized.
When configuring the MIDI 2.0 gadget via configfs and setting the block
direction to SNDRV_UMP_DIR_INPUT, the initialization of the midi1_ep_out
endpoint is explicitly skipped during the gadget bind phase
(f_midi2_bind()). As a result, the usb_ep->card field remains NULL.
Later, when the host sets the alternate setting, f_midi2_set_alt()
unconditionally stops both the IN and OUT endpoints by calling
f_midi2_stop_eps(), which in turn calls f_midi2_free_ep_reqs() for both
endpoints. When f_midi2_free_ep_reqs() is called for the uninitialized
midi1_ep_out, it attempts to dereference usb_ep->card to determine the
number of requests to free, leading to a crash.
Fix this by using usb_ep->num_reqs instead of usb_ep->card->info.num_reqs
in f_midi2_free_ep_reqs(). usb_ep->num_reqs is correctly set during
f_midi2_init_ep() and remains 0 if the endpoint was never initialized,
safely avoiding the loop. For consistency, apply the same change to
f_midi2_alloc_ep_reqs().
Oops: general protection fault, probably for non-canonical address
0xdffffc00000000ee: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000770-0x0000000000000777]
...
RIP: 0010:f_midi2_free_ep_reqs drivers/usb/gadget/function/f_midi2.c:1166
[inline]
RIP: 0010:f_midi2_stop_eps+0x28e/0x4d0
drivers/usb/gadget/function/f_midi2.c:1246
...
Call Trace:
<TASK>
f_midi2_set_alt+0x11c/0xf00 drivers/usb/gadget/function/f_midi2.c:1296
composite_setup+0x1ffd/0x3480 drivers/usb/gadget/composite.c:1933
configfs_composite_setup+0xbd/0x100 drivers/usb/gadget/configfs.c:1877 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix infinite loop in pcpu_freelist push with one possible CPU
__pcpu_freelist_push() can loop forever when only one CPU is possible
and an NMI re-enters pcpu_freelist_push() while the interrupted context
holds that CPU's freelist lock.
After the current-CPU fast path fails, the fallback loop walks
cpu_possible_mask while skipping the current CPU. With CONFIG_SMP=n, or
when an SMP kernel is limited to one possible CPU with nr_cpus=1 or
possible_cpus=1, there are no other possible CPUs to examine. The loop
therefore makes no lock acquisition attempt and can never make progress.
The following stack was observed on a UP system:
NMI context:
pcpu_freelist_push
free_htab_elem
htab_map_delete_elem
[perf-event BPF program]
__perf_event_overflow
perf_event_nmi_handler
exc_nmi
Interrupted context:
__pcpu_freelist_push
pcpu_freelist_push
free_htab_elem
htab_map_delete_elem
[raw_tp/sys_enter BPF program]
__bpf_trace_sys_enter
do_syscall_64
raw_res_spin_lock() detects the same-CPU recursive acquisition and
returns -EDEADLK, but the subsequent fallback loop has no candidate head
on a system with one possible CPU.
Restore the extra fallback head that existed before the rqspinlock
conversion. Keep the current-CPU fast path, then try the other possible
CPUs and finally the extra head. The additional head lets a push, which
cannot fail without losing a preallocated element, make progress when the
only per-CPU head is held by the interrupted context.
Also check the extra head from the pop path so that nodes placed there
can be reused. |
| A use-after-free vulnerability in the Linux kernel's af_unix component can be exploited to achieve local privilege escalation.
The unix_stream_sendpage() function tries to add data to the last skb in the peer's recv queue without locking the queue. Thus there is a race where unix_stream_sendpage() could access an skb locklessly that is being released by garbage collection, resulting in use-after-free.
We recommend upgrading past commit 790c2f9d15b594350ae9bca7b236f2b1859de02c (or backported equivalents). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: synopsys: dw-dp: Support unregistering the AUX channel
The DisplayPort AUX channel gets initialized and registered during
dw_dp_bind(), but it is never unregistered, which may lead to resource
leaks and/or use-after-free.
Add the missing dw_dp_unbind() function to allow the users of the
library to handle the required cleanup, i.e. unregister the AUX adapter. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/powerplay: fix VoltageObjectInfo zero-stride loop and OOB read
Reject voltage objects whose usSize is smaller than the header or would
advance the cursor past the table end, preventing an infinite loop or
heap OOB read when the VBIOS supplies a malformed VoltageObjectInfo table. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/mes: Fix hung_queue_db_array loop limit for multi-XCC
The loop iterated only AMDGPU_MAX_MES_PIPES times, leaving entries
uninitialized for multi-XCC GPUs. This causes null pointer dereferences
when accessing arrays indexed by XCC ID >= 2. Extend the loop to cover
all XCCs (AMDGPU_MAX_MES_PIPES * num_xcc), matching other per-XCC
arrays. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: glink: fix deadlock in endpoint destroy during driver detach
During driver detach, the device core holds the device mutex throughout
the driver's remove callback chain. When the rpmsg endpoint is
destroyed as part of that teardown, the GLINK endpoint destroy
implementation attempts to unregister the underlying rpmsg device.
That unregistration calls device_del(), which tries to re-acquire the
same device mutex already held higher up the stack, causing rmmod to
hang indefinitely.
The deadlock manifests with the following call chain:
[<0>] device_del+0x44/0x414 <- tries to acquire same mutex
[<0>] device_unregister+0x18/0x34
[<0>] rpmsg_unregister_device+0x28/0x4c
[<0>] qcom_glink_remove_rpmsg_device+0x70/0xc0
[<0>] qcom_glink_destroy_ept+0x58/0xbc
[<0>] rpmsg_dev_remove+0x50/0x60
[<0>] device_remove+0x4c/0x80
[<0>] device_release_driver_internal+0x1cc/0x228 <- acquires device mutex
[<0>] driver_detach+0x4c/0x98
[<0>] bus_remove_driver+0x6c/0xbc
[<0>] driver_unregister+0x30/0x60
[<0>] unregister_rpmsg_driver+0x10/0x1c
[<0>] fastrpc_exit+0x28/0x38 [fastrpc]
[<0>] __arm64_sys_delete_module+0x1b8/0x294
[<0>] invoke_syscall+0x48/0x10c
[<0>] el0_svc_common.constprop.0+0xc0/0xe0
[<0>] do_el0_svc+0x1c/0x28
[<0>] el0_svc+0x34/0x108
[<0>] el0t_64_sync_handler+0xa0/0xe4
[<0>] el0t_64_sync+0x198/0x19c
The rpmsg device unregistration inside endpoint destroy is redundant.
In both contexts where endpoint destruction is triggered:
- Driver detach path: the driver core already tears down the rpmsg
device.
- Channel close path: the rpmsg device is already unregistered before
endpoint destruction is reached.
Remove the redundant unregistration to fix the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: Fix cleanup ordering
Commit 173e02d67494 ("OPP: Initialize scope-based pointers inline")
added initialization for all pointers. In some cases, the ordering was
changed so that *opp_table was initialized after *opp. This also changes
the order of the registered cleanup functions.
When the cleanup happens, this can cause use-after-free errors when the
last reference is released and the release function _opp_kref_release
tries to access the already freed opp->opp_table.
Initialize *opp_table before *opp again to fix this and ensure the
correct cleanup order. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition()
mtd_add_partition() does not reject the special offset value
MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in
add_mtd_device() when called through the BLKPG ioctl on NAND
devices. The RETAIN value depends on cur_offset being the end of
the previous partition, but in the dynamic partition path
cur_offset equals the offset argument itself, causing undefined
behavior.
Commit 5daa7b21496a ("mtd: prepare partition add and del functions
for ioctl requests") introduced mtd_add_partition() and correctly
rejected MTDPART_OFS_APPEND (-1) and MTDPART_OFS_NXTBLK (-2),
since those special offsets rely on cur_offset tracking the
previous partition's end. However, commit 1a31368bf92e ("mtd: add a flags
for partitions which should just leave smth. after them")
later added MTDPART_OFS_RETAIN (-3) for the static
partition table path without updating mtd_add_partition() to
also reject this value.
With offset=-3 passed via BLKPG, the RETAIN size calculation in
allocate_partition() underflows (parent_size - 0xFFFFFFFFFFFFFFFD
= parent_size + 3). If the underflow result does not appear to
leave enough space, allocate_partition() jumps to out_register via
goto, skipping erasesize initialization. This results in
erasesize=0, which triggers:
WARN_ON((!mtd->erasesize || !master->_erase) &&
!(mtd->flags & MTD_NO_ERASE))
in add_mtd_device(). If the underflow result appears to leave
enough space, a bogus partition size is calculated, but the
"out of reach" sanity check catches the invalid offset and
creates a disabled empty partition (offset=0, size=0) instead
of returning an error.
Fix this by adding MTDPART_OFS_RETAIN to the rejection list in
mtd_add_partition(), consistent with the existing handling of
APPEND and NXTBLK. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Prevent leak in its_vpe_irq_domain_alloc()
When its_irq_gic_domain_alloc() fails, the following
its_vpe_irq_domain_free() fails to invoke its_vep_teardown() for the
corresponding interrupt, which leaks the resource.
Invoke its_vpe_teardown() in the error handling path to avoid the leak.
[ tglx: Massaged change log ] |
