| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds read in Windows Storage Port Driver allows an unauthorized attacker to disclose information with a physical attack. |
| Out-of-bounds read in Windows Spaceport.sys allows an authorized attacker to disclose information over a network. |
| Out-of-bounds read in Windows Resilient File System (ReFS) allows an authorized attacker to elevate privileges locally. |
| Buffer overflow in PDFium in Google Chrome on on Windows prior to 153.0.8010.52 allowed a remote attacker leveraging social engineering to potentially execute arbitrary code inside the sandbox via a crafted PDF file. (Chromium security severity: High) |
| Out-of-bounds read in Windows Error Reporting allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Overlay Filter allows an authorized attacker to disclose information over a network. |
| Out-of-bounds read in Windows Image Acquisition allows an authorized attacker to disclose information locally. |
| IBM MQ Appliance could allow a remote attacker to cause a denial of service or potentially execute arbitrary code due to a heap buffer overflow in protocol message processing before authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate MOVE_RANGE destination size
F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end
before updating i_size. A source hole can expose this: __clone_blkaddrs()
skips NULL_ADDR entries and returns success, so the caller can still extend
the destination inode with unchecked pos_out + len.
Reject destination overflow and use inode_newsize_ok() before extending
the destination inode. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: limit recovery filename logging to stored length
F2FS stores recovery filenames as a length plus a fixed-size i_name
buffer. The buffer is not NUL-terminated, but recover_inode() and
recover_dentry() print it with %s.
For a 255-byte filename, recovery logging can read past i_name into the
following raw inode fields.
Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent out-of-bounds reads in share config responses
Validate IPC share configuration payload sizes before consuming
variable-length fields. Bound veto list parsing and account for
the separator byte when deriving the path length. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read
cxl_rch_get_aer_info() copies the RCH Downstream Port AER capability from
the RCRB MMIO block using a readl() loop bounded by sizeof(struct
aer_capability_regs). This struct is a software layout and its embedded
struct pcie_tlp_log is larger than the on-wire AER capability. As a
result the loop reads past the mapped AER register block.
The over-read also populates the software-only tail fields including
header_log.header_len. An out-of-range header_len passed to
pcie_print_tlp_log() can then loop past the header log buffer and cause
a second out-of-bounds read.
The read was correct when introduced, but struct pcie_tlp_log has since
grown (Header Log and TLP Prefix Log sizes, header_len and flit fields),
so sizeof(struct aer_capability_regs) no longer matches the physical AER
capability.
Bound the read to the physical AER registers, header through the 16 byte
Header Log. Zero the destination first so the software-only fields are
deterministic. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in writeback_store()
Patch series "zram: fix stale scan bounds after reinitialization".
Both writeback_store() and read_block_state() derive their table scan
bounds from zram->disksize before acquiring dev_lock. If the device is
reset and reinitialized with a smaller disksize between that read and lock
acquisition, the bound can describe the old table while the scan operates
on the new one. This can lead to out-of-bounds slot accesses.
Move both bound calculations under dev_lock so each bound remains
consistent with the table throughout its scan. Keep the fixes separate
because the affected interfaces originate from different commits and can
be backported independently.
This patch (of 2):
writeback_store() calculates the table scan bounds before taking dev_lock.
A reset followed by reconfiguration with a smaller disksize can therefore
replace zram->table while writeback_store() is waiting for the lock. Once
it acquires the lock, it sees an initialized device but scans the new
table using the old upper bound, resulting in an out-of-bounds access.
Calculate the number of pages while holding dev_lock so the scan bound
matches the table protected by the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: validate sockaddr length per family in listener_set
nfsd_sock_nl_policy declares NFSD_A_SOCK_ADDR as a bare NLA_BINARY
attribute with no minimum length. A CAP_NET_ADMIN caller can send a
16-byte NFSD_A_SOCK_ADDR with sa_family=AF_INET6, causing a 12-byte
OOB read across three consumers (rpc_cmp_addr_port, svc_find_listener,
kernel_bind).
nfsd_nl_listener_set_doit() also parsed and validated each listener
entry inline in two separate loops, interleaved with mutating the
running listener configuration. The validation was duplicated, used an
open-coded "nla_len < sizeof(struct sockaddr)" check that was too short
for AF_INET6, and handled a malformed entry inconsistently depending on
which loop noticed it.
Add an nfsd_nl_validate_listeners() helper that walks the entire list
once and confirms each entry parses, carries both an address and a
transport name, and is long enough for its address family
(sizeof(struct sockaddr_in) for AF_INET, sizeof(struct sockaddr_in6)
for AF_INET6, -EAFNOSUPPORT otherwise). Call it before taking
nfsd_mutex or creating the serv, so a malformed request fails cleanly
with no side effects.
Since every entry is known valid by the time the two existing loops
run, drop the redundant presence and per-family length checks from
both, leaving only the nla_parse_nested() call needed to extract the
data. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: widen nfsd_genl_rqstp address fields to sockaddr_storage
struct nfsd_genl_rqstp declares rq_daddr and rq_saddr as plain
"struct sockaddr" (16 bytes). When an IPv6 NFS client is connected,
nfsd_genl_rpc_status_compose_msg() casts these fields to
"struct sockaddr_in6 *" (28 bytes) and reads sin6_addr at offset 8..24,
which extends 8 bytes past the end of the 16-byte sockaddr field into
the adjacent rq_flags member. The 16-byte nla_put_in6_addr then ships 8
bytes of truncated IPv6 address followed by 8 bytes of rq_flags to
userspace via the NFSD_A_RPC_STATUS_SADDR6/DADDR6 netlink attributes.
This is reachable by any unprivileged process in the network namespace
because NFSD_CMD_RPC_STATUS_GET uses GENL_CMD_CAP_DUMP without
GENL_ADMIN_PERM.
Fix by widening rq_daddr and rq_saddr to struct sockaddr_storage so the
IPv6 casts operate within bounds, copying sizeof(struct sockaddr_storage)
bytes in the memcpy calls so the full address is captured, and
zero-initializing the genl_rqstp stack variable to prevent leaking
uninitialized tail bytes through netlink. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix clock domain mismatch in clients_still_reclaiming()
clients_still_reclaiming() computes a deadline from nn->boot_time
(CLOCK_REALTIME, ~1.7 billion) but compares it against
ktime_get_boottime_seconds() (CLOCK_BOOTTIME, seconds since boot).
The comparison is always false — it would take ~54 years of uptime
for BOOTTIME to exceed the REALTIME-derived deadline.
This means any client can hold the server in grace indefinitely by
sending CLAIM_PREVIOUS OPEN requests, blocking all non-reclaim
operations for all other clients.
Add boot_time_bt (CLOCK_BOOTTIME) alongside the existing boot_time
and use it for the deadline computation. boot_time (CLOCK_REALTIME)
is preserved for its cl_boot clientid-nonce role. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate directory-index entry counts when reading metadata
ocfs2_validate_dx_leaf() and ocfs2_validate_dx_root() check the ECC and
signature of an indexed-directory block before it reaches higher-level
callers, but neither validator bounds the ocfs2_dx_entry_list counts
against the capacity of the block that holds them.
ocfs2_dx_dir_search() then walks
for (i = 0; i < le16_to_cpu(entry_list->de_num_used); i++)
dx_entry = &entry_list->de_entries[i];
over de_num_used entries with no bounds check. entry_list is either
dx_leaf->dl_list (from ocfs2_read_dx_leaf) or, for an inline root,
dx_root->dr_entries. A crafted on-disk image can set de_num_used (and
de_count, which is the __counted_by_le() bound of de_entries) to 0xffff
and make the walk read far past the end of the 4KB metadata block, giving
a slab out-of-bounds read reachable from any path lookup, stat() or open()
on an indexed directory once the image is mounted.
Commit 775c17386a6f ("ocfs2: validate dx_root extent list fields during
block read") already bounds dr_list for the non-inline dx_root, but left
the inline dr_entries path and the dx_leaf dl_list unchecked. Add the
same read-time validation for both entry lists: de_count must equal the
capacity of the block (ocfs2_dx_entries_per_leaf()/per_root()) and
de_num_used must not exceed de_count, rejecting corrupted metadata with
-EFSCORRUPTED before ocfs2_dx_dir_search() can walk an out-of-range entry
array.
de_count is always written as exactly the block capacity when a leaf or
inline root is formatted, so the equality check does not reject any valid
image.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: virtio - bound the akcipher result length
virtio_crypto_dataq_akcipher_callback() sets the result length from the
device-reported response length without bounding it to the destination
buffer, which was allocated for the original request length.
sg_copy_from_buffer() then reads that many bytes from the destination
buffer; a backend reporting a larger length over-reads adjacent kernel
heap into the caller's scatterlist (an out-of-bounds read).
Clamp the reported length to the originally requested destination length.
A conforming device reports no more than that, so valid results are
unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use memcmp() to compare ClientGUIDs
ClientGUID is a fixed-size binary value and can contain embedded NUL
bytes. strncmp() stops comparing at the first NUL byte, so different
ClientGUID values can incorrectly be treated as equal.
Use memcmp() in SMB3 multichannel session binding and
FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE
bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: aiu: Validate written enum values
The AIU HDMI and internal codec mux put callbacks use the written enum
value with snd_soc_enum_item_to_val() before checking whether the value is
valid for the enumeration.
Reject out-of-range values before converting the enum item, matching the
validation already done by the G12A HDMI and internal codec mux controls. |
