| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Validate string descriptors
The string descriptor length includes a two-byte header while the UTF-16
payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code
units, not bytes. Passing the payload byte count can make it read beyond
the descriptor buffer.
Validate that the payload has an even byte count, pass a code-unit count to
the converter, and allocate sufficient UTF-8 output space.
The raw string buffer starts after the descriptor header but its size is
bLength. Copying bLength bytes from that pointer can read beyond the
response buffer.
Allocate a zeroed bLength-sized buffer and copy only the UTF-16
payload. This preserves the raw buffer size consumed by the RPMB device-ID
ABI while avoiding the overread. |
| A security flaw has been discovered in Totolink A3002MU Hh-B20211125.1046. Affected by this vulnerability is the function formWlWds of the file /boafrm/formWlWds. The manipulation of the argument submit-url results in buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: bound TLV walk in mt7996_mcu_get_chip_config
The response TLV loop advanced by tlv->len without a minimum, so a
theoretical firmware response containing a zero-length TLV could spin
forever, hanging the CPU during device probe.
The u32 payload was also read without bounds checking.
Reject a short fixed field, stop on a TLV whose length underruns the
header or overruns the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: dw: avoid shift-out-of-bounds when DAA assigns no devices
On an empty bus ENTDAA assigns nothing, so cmd->rx_len (the count
of addresses left unassigned) equals master->maxdevs.
The GENMASK() index master->maxdevs - cmd->rx_len - 1 then becomes -1,
which trips up UBSAN. This happens every time on boot on a Gigabyte/AMD
server:
UBSAN: shift-out-of-bounds in drivers/i3c/master/dw-i3c-master.c:905:12
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 7 UID: 0 PID: 963 Comm: (udev-worker) Not tainted 7.0.11-200.fc44.x86_64 #1 PREEMPT(lazy)
Hardware name: Giga Computing E163-Z34-AAH1-000/MZ33-DC1-000, BIOS R32_F45 04/01/2026
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x2b
__ubsan_handle_shift_out_of_bounds.cold+0xd7/0x1ab
dw_i3c_master_daa.cold+0x1b/0x96 [dw_i3c_master]
i3c_master_do_daa_ext.part.0+0x3e/0xf0 [i3c]
Skip the mask when no new device was assigned. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix stride mismatch in mac_phy_caps_parse()
Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the
mac_phy_caps buffer as tot_phy_id * len, where len is clamped to
min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent
memcpy() destination advances by sizeof(full struct) per slot via C
pointer arithmetic, not by the clamped len. When firmware sends short
TLVs, the second and later slots are written past the end of the
allocation.
The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the
buffer with full-struct pointer arithmetic, so the allocation must match
that stride.
Fix by using kzalloc_objs(), which derives the element size from the
pointer type, making allocation size and pointer stride provably
consistent regardless of what len the firmware provides.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry()
table->offset[i] is a u32 from firmware, but was stored into a signed
int. A crafted offset like 0xFFFFFFF0 becomes -16, placing hdr 16 bytes
before the table buffer. The subsequent avail check was bypassed
because the negative int was promoted to a large size_t in the
expression "table_sz - offset - sizeof(*hdr)", yielding a large positive
avail and letting the out-of-bounds hdr->type read proceed undetected.
Store the offset as u32 and validate it with unsigned comparisons before
any pointer arithmetic. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/cluster: keep heartbeat local node stable
o2nm_node_local_store() handles local=0 by stopping o2net and setting
cl_local_node to O2NM_INVALID_NODE_NUM, but it leaves cl_has_local set.
That stale state makes o2nm_this_node() return 255, blocks a later local=1
attempt with -EBUSY, and can feed 255 to heartbeat users that call
o2nm_this_node() dynamically.
Clearing cl_has_local is required when the local node is reset. But
heartbeat threads can still be running at that point. They pin the local
node config item at startup, yet o2hb_do_disk_heartbeat() and thread
teardown re-read o2nm_this_node() for the local slot and for
o2nm_undepend_this_node(). Once local=0 has cleared the live local-node
state, those dynamic reads return O2NM_MAX_NODES, which is also the
invalid node number 255.
Store the local node number in the heartbeat region when the region
starts. Use that stable node for heartbeat slot writes/checks,
negotiation messages, and the final configfs undepend. Stop the heartbeat
loop when the current local node no longer matches the stored node, and
clear cl_has_local together with cl_local_node in the local=0 path so
nodemanager state matches node removal.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in o2hb_do_disk_heartbeat+0x372/0xb30
RIP: 0010:memset+0xf/0x20
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xd0/0x630
o2hb_do_disk_heartbeat+0x372/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x188/0x2f0
kasan_report+0xe4/0x120
o2hb_do_disk_heartbeat+0x5/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
o2hb_thread+0x14e/0x770
kthread_affine_node+0x139/0x180
lockdep_hardirqs_on_prepare+0xda/0x190
trace_hardirqs_on+0x18/0x130
kthread+0x19d/0x1e0
ret_from_fork+0x37a/0x4d0
__switch_to+0x2d5/0x6f0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: refactor the two workqueues and init sequence
Multiple issues have been found within the hid-asus driver:
- unchecked size in asus_raw_event()
- unclean teardown of asus_probe on failure
- possible use-after-free in asus_probe
- multiple workqueue used for jobs where one was enough
- sleeping calls in atomic context
- packets of incorrect size being sent to the keyboard controller
Join the two workqueues into one reusing the stopping mechanism
of the brightness workqueue, use the joined workqueue to also
move the asus_wmi_send_event() sleeping call away from atomic
context and add a size check in asus_raw_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: snoc: use memcpy_fromio() for MSA ramdump
On WCN3990/SNOC the MSA region is mapped with devm_memremap(MEMREMAP_WT).
On arm64 such a mapping is not Normal-cacheable, so unaligned accesses to
it are not permitted. ath10k_msa_dump_memory() copies the region with a
plain memcpy(), whose optimized __pi_memcpy_generic implementation issues
wide/unaligned loads. This triggers an alignment fault (FSC=0x21) Oops in
ath10k_snoc_fw_crashed_dump() while collecting the devcoredump:
Unable to handle kernel paging request ... FSC=0x21: alignment fault
pc : __pi_memcpy_generic
lr : ath10k_snoc_fw_crashed_dump [ath10k_snoc]
The Oops both leaves the firmware RAM dump buffer zeroed (no dump is
captured) and crashes the kernel, which in turn breaks modem SSR
recovery.
Use memcpy_fromio(), which only performs accesses that are valid for such
a device-memory mapping. The generic memcpy_fromio() implementation aligns
the source before issuing word-sized reads and stores the destination with
put_unaligned(), so it is also safe for the coherent DMA allocation used on
the non-reserved-memory path. ath11k and ath12k use the same pattern
when copying target memory into crash dumps, so call it unconditionally
here too.
The MEMREMAP_WT pointer is a plain void *, so an explicit __iomem cast is
needed; use __force to keep sparse happy.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.3.7.c5-00107-QCAHLSWMTPL-1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: reject out-of-range link ids in mt76_vif_link()
mt76_vif_link() indexes mvif->link[] without validating link_id, but
callers pass mvif->deflink_id / msta->deflink_id, which hold
IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added.
Since IEEE80211_MLD_MAX_NUM_LINKS is 15, that reads one element past the
end of the array, aliasing mt76_vif_data.offchannel_link.
Reachable via mt7996_set_tsf()/mt7996_offset_tsf() and
mt7996_net_fill_forward_path(). Bounds check link_id and return NULL,
matching mt7996_sta_link() and mt7996_sta_link_protected(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data()
In that function, we round down the start position and round up the
ending position.
But during the calculation of @len, we use "round_up(start + len,
sectorsize)", which is the rounded up end position, not the rounded up
length.
Which results a much larger length, and later we are still using
"start + len", which is completely incorrect.
Fix it by declaring a local @aligned_start and @aligned_len and use them
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, x86: Fix trampoline stack size for 128-bit arguments
btf_distill_func_proto() accepts a function argument up to 16 bytes, so a
128-bit scalar such as __int128 reaches the x86 trampoline with
arg_size == 16. But the current implementation assumes an __int128
argument only needs one register, so the register save area is
under-allocated and save_args() overwrites adjacent stack slots.
Compute the register count from arg_size for all arguments to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Resize MST HDCP per-connector arrays to 32
AMDGPU_DM_MAX_DISPLAY_INDEX is 31. It suggest a maximum number of
32 connectors. But the way it's used is like MAX_DISPLAY_COUNT.
Hence we're off by one with DRM core, which supports a max of 32
connectors.
Rename AMDGPU_DM_MAX_DISPLAY_INDEX to AMDGPU_DM_MAX_DISPLAY_COUNT
to match its actual use, and increase the size to 32 to match the
originally intended size. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix heap out-of-bounds read in nvmet_auth_negotiate()
nvmet_execute_auth_send() allocates the DH-HMAC-CHAP message buffer with
the host-supplied transfer length (tl) and hands it to
nvmet_auth_negotiate() without passing tl along. nvmet_auth_negotiate()
then reads the negotiate header and, for each of the halen hash
identifiers and dhlen DH group identifiers, indexes into the fixed
idlist[60] array (hashes at idlist[0..halen), groups at idlist[30..]).
Neither the transfer length nor halen/dhlen is validated. A malicious or
non-conformant host can report a tl smaller than the negotiate structure,
or a halen/dhlen larger than the array (both are u8, up to 255), making
the loops read past the end of the allocated buffer (heap out-of-bounds
read). The sibling nvmet_auth_reply() already validates tl against the
structure size; the negotiate path did not.
Pass tl into nvmet_auth_negotiate(), reject a tl that does not cover the
negotiate data plus one full protocol descriptor, and reject halen/dhlen
larger than NVME_AUTH_DHCHAP_MAX_DH_IDS. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix integer overflow in verify_tags() bounds check
verify_tags() validates the tagset table unpacked from a policy blob.
For each set it reads a count and checks that advancing the index by
that count stays inside sets.table[]:
u32 cnt = tags->sets.table[i];
if (i+cnt >= tags->sets.size) {
i, cnt and sets.size are all u32, so i+cnt is evaluated modulo 2^32.
sets.table[] is filled by unpack_tagsets() with aa_unpack_u32(), so
every entry is a raw unbounded 32-bit word taken from the policy blob,
and verify_tags() is the function that is supposed to validate it. A
count close to U32_MAX makes the sum wrap to a small value, the guard
passes, and the inner loop then walks sets.table[++i] past the end of
the kcalloc(size, sizeof(u32)) allocation.
Note that sets.size is bounded by 65535, because unpack_tagsets() reads
it with aa_unpack_array() as a u16, so the wrap cannot be reached by
growing the table; it is reached purely through the attacker-supplied
count.
With sets.size = 2 and sets.table = { 0, 0xffffffff }:
i = 0: cnt = 0, guard 0 + 0 >= 2 is false, inner loop does not run
i = 1: cnt = 0xffffffff, guard (1 + 0xffffffff) mod 2^32 == 0 >= 2 is
false, so the guard is bypassed and the inner loop reads
sets.table[2] -- one element past a two element allocation
The walk continues until an out-of-bounds value happens to be >=
hdrs.size or the access faults, so a crafted policy yields an
out-of-bounds read on the policy load path
(aa_replace_profiles -> aa_unpack -> unpack_policydb -> unpack_tags ->
verify_tags). unpack_tags() runs before the perms and DFA tables are
unpacked, so no other table needs to be well formed to reach it.
Policy load is gated by aa_may_manage_policy(), which checks
CAP_MAC_ADMIN relative to the subject's own user namespace rather than
the init user namespace, so with the default
unprivileged_userns_apparmor_policy=1 the path is reachable from an
unprivileged task in a matched-level nested namespace, not only by a
globally privileged one.
Perform the addition in u64 so that it cannot wrap, restoring the
intended i + cnt < sets.size guarantee. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MSFT: validate evt_prefix_len against the response length
read_supported_features() only checks that the response covers the fixed
part of struct msft_rp_read_supported_features, which is 11 bytes:
if (skb->len < sizeof(*rp)) {
bt_dev_err(hdev, "MSFT supported features length mismatch");
goto failed;
}
evt_prefix[] is a flexible array member and rp->evt_prefix_len is an
unvalidated u8 taken straight out of that response, so
msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len,
GFP_KERNEL);
copies up to 255 bytes from a reply that may have carried none of them.
What is copied is data the controller never sent, and it is then used to
match incoming vendor events in msft_vendor_evt().
This is not an out-of-bounds access. An skb data allocation always has
at least SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) bytes past the
payload, which is more than the 255 byte maximum, so the read stays
inside the allocation and KASAN does not report it. It is still a read
of bytes the host was never given, with the length fully controlled by
the controller.
Reject a response that is too short for the prefix it declares.
Verified with an emulated controller over /dev/vhci on a KASAN kernel,
with vhci made to advertise an MSFT opcode the way btintel, btqca, btmtk
and btrtl do unconditionally. A reply of exactly 11 bytes declaring
evt_prefix_len = 255 reaches kmemdup and copies 255 bytes
("skb->len=11 evt_prefix_len=255", with the copied buffer dumped); since
the reply ends at the fixed part, all 255 come from past the end of the
response. No KASAN report is produced, as expected from the allocation
slack described above. With this patch the response is rejected with
"MSFT event prefix length mismatch" and msft->evt_prefix is left unset. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate orphan slot during inode read
Patch series "ocfs2: validate active orphan slots during inode read".
OCFS2 trusts active ordinary and append-DIO orphan slots read from dinodes.
A corrupted slot can therefore index osb_orphan_wipes or the slot-local
system-inode cache outside their allocations before the corruption is
reported.
Patch 1 validates the ordinary orphan slot used by inode wipe processing.
Patch 2 validates the append-DIO orphan slot used by DIO completion and
orphan recovery. Both checks reject corrupt metadata at the existing inode
validation boundary.
This patch (of 2):
[BUG]
A corrupted dinode with OCFS2_ORPHANED_FL can carry an
i_orphaned_slot outside the mounted filesystem slot range.
ocfs2_wipe_inode() uses it to index osb_orphan_wipes before looking
up the orphan directory, causing an out-of-bounds memory access.
BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102
Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85
Call Trace:
...
ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102
ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840
ocfs2_delete_inode fs/ocfs2/inode.c:1155 [inline]
ocfs2_evict_inode+0x6c9/0x1170 fs/ocfs2/inode.c:1295
evict+0x38e/0x8f0 fs/inode.c:810
iput_final fs/inode.c:1914 [inline]
iput fs/inode.c:1966 [inline]
iput+0x55b/0x8b0 fs/inode.c:1926
ocfs2_recover_orphans+0x610/0xe40 fs/ocfs2/journal.c:2374
ocfs2_complete_recovery+0x5af/0xd00 fs/ocfs2/journal.c:1373
...
[CAUSE]
ocfs2_validate_inode_block() validates i_suballoc_slot but leaves
the active ordinary orphan slot unchecked. Downstream consumers
assume that the value is smaller than osb->max_slots.
[FIX]
Reject an active i_orphaned_slot outside the slot range during
dinode validation, before the inode reaches orphan wipe processing. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: bound SNL TLV parsing to the skb and add length checks
nfc_llcp_recv_snl() walked the SNL TLV list using a u16 offset/length
pair derived from skb->len, without bounding reads to the actual skb
data. Three problems followed:
- For a short frame (skb->len < LLCP_HEADER_SIZE), tlv_len underflowed.
- The per-TLV header (type, length) was read without checking that two
bytes remained.
- A declared TLV length could run past the end of the buffer, and an
SDREQ with length == 0 made "service_name_len = length - 1" underflow
(size_t), driving an out-of-bounds read in the following strncmp() /
nfc_llcp_sock_from_sn(). The SDRES case likewise read tlv[2]/tlv[3]
without a length check.
A nearby NFC device can reach this without authentication; LLCP link
activation happens automatically after NFC-DEP.
Walk the TLV list by pointer, bounded by skb_tail_pointer() over the
linear skb data, and validate each TLV declared length before use. Add
explicit length checks for SDREQ (>= 1) and SDRES (exactly 2).
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate ipc response length before dereferencing its fields
ipc_validate_msg() computes the expected message size by reading length
fields out of the response buffer supplied by the userspace ksmbd daemon
(payload_sz, session_key_len, ngroups, ...). Those fields are read before
the buffer is verified to be large enough to contain the struct they belong
to, so a short response makes the read land past the end of the allocation.
handle_response() sizes entry->response purely from the netlink attribute
length (nla_len()) and only guards the leading handle read, so the daemon
can install a response as small as the kmalloc-8 object seen below. When
ipc_msg_send_request() then calls ipc_validate_msg() for a
KSMBD_EVENT_RPC_REQUEST, the cast to struct ksmbd_rpc_command reads
resp->payload_sz at offset 8 of an 8-byte allocation:
[ 3697.841381] ==================================================================
[ 3697.844099] BUG: KASAN: slab-out-of-bounds in ipc_msg_send_request+0x763/0x800
[ 3697.846604] Read of size 4 at addr ffff888105f95910 by task kworker/4:3/20682
[ 3697.849061]
[ 3697.849801] CPU: 4 UID: 0 PID: 20682 Comm: kworker/4:3 Not tainted 7.2.0-rc3-next-20260717-virtme #117 PREEMPT(lazy)
[ 3697.850077] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 3697.850303] Workqueue: ksmbd-io handle_ksmbd_work
[ 3697.850592] Call Trace:
[ 3697.850794] <TASK>
[ 3697.850952] __dump_stack+0x21/0x60
[ 3697.851239] dump_stack_lvl+0xc2/0x100
[ 3697.851528] print_address_description+0x77/0x200
[ 3697.851816] ? ipc_msg_send_request+0x763/0x800
[ 3697.852024] print_report+0x58/0x70
[ 3697.852316] kasan_report+0x117/0x150
[ 3697.852585] ? down_write+0x146/0x1f0
[ 3697.852809] ? ipc_msg_send_request+0x763/0x800
[ 3697.853082] ipc_msg_send_request+0x763/0x800
[ 3697.853385] ? __pfx_ipc_msg_send_request+0x10/0x10
[ 3697.853604] ? kasan_unpoison+0x48/0x70
[ 3697.853936] ? __pfx___up_read+0x10/0x10
[ 3697.854221] ksmbd_rpc_ioctl+0x380/0x520
[ 3697.854542] ? __pfx_ksmbd_rpc_ioctl+0x10/0x10
[ 3697.854757] ? kasan_unpoison+0x48/0x70
[ 3697.854962] ? copy_from_kernel_nofault+0x32c/0x4e0
[ 3697.855166] ? kasan_unpoison+0x48/0x70
[ 3697.855416] fsctl_pipe_transceive+0x139/0x7a0
[ 3697.855705] ? __pfx_copy_from_kernel_nofault+0x10/0x10
[ 3697.855937] ? __pfx_fsctl_pipe_transceive+0x10/0x10
[ 3697.856388] ? __sanitizer_cov_trace_switch+0x7b/0x140
[ 3697.856620] smb2_ioctl+0x1141/0x3420
[ 3697.856994] ? __pfx_smb2_ioctl+0x10/0x10
[ 3697.857182] ? get_smb2_cmd_val+0xe3/0x1c0
[ 3697.857655] handle_ksmbd_work+0x9ad/0x15e0
[ 3697.858034] ? __pfx_handle_ksmbd_work+0x10/0x10
[ 3697.858251] ? lock_release+0xf7/0x360
[ 3697.858466] ? process_scheduled_works+0x954/0x1600
[ 3697.858698] ? process_scheduled_works+0x954/0x1600
[ 3697.858905] process_scheduled_works+0xc22/0x1600
[ 3697.859368] ? __pfx_process_scheduled_works+0x10/0x10
[ 3697.859637] ? __pfx_assign_work+0x10/0x10
[ 3697.859896] ? lock_is_held_type+0x7b/0x110
[ 3697.860146] worker_thread+0x975/0xee0
[ 3697.860524] ? __pfx_do_raw_spin_lock+0x10/0x10
[ 3697.860830] ? __kthread_parkme+0x21e/0x260
[ 3697.861105] kthread+0x3a6/0x490
[ 3697.861423] ? __pfx_worker_thread+0x10/0x10
[ 3697.861643] ? __pfx_kthread+0x10/0x10
[ 3697.861878] ret_from_fork+0x55a/0xa20
[ 3697.862194] ? __pfx_ret_from_fork+0x10/0x10
[ 3697.862480] ? __pfx_kthread+0x10/0x10
[ 3697.862714] ret_from_fork_asm+0x1a/0x30
[ 3697.862965] </TASK>
[ 3697.863039]
[ 3697.938882] Allocated by task 20761:
[ 3697.940257] kasan_save_track+0x3e/0x80
[ 3697.941782] __kasan_kmalloc+0x72/0x90
[ 3697.943228] __kvmalloc_node_noprof+0x3e9/0x6a0
[ 3697.944948] handle_generic_event+0x59b/0x750
[ 3697.946592] genl_family_rcv_msg_doit+0x3d6/0x560
[ 3697.946977] genl_rcv_msg+0x67c/0x900
[ 3697.947224] netlink_rcv_skb+0x286/0x580
[ 3697.947488] genl_rcv+0x2d/0x80
[ 3
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user()
ksmbd_alloc_user() copies resp->hash_sz bytes out of the mountd IPC
login response with
user->passkey_sz = resp->hash_sz;
user->passkey = kmalloc(resp->hash_sz, KSMBD_DEFAULT_GFP);
if (user->passkey)
memcpy(user->passkey, resp->hash, resp->hash_sz);
resp->hash_sz is a __u16 supplied by the response, but resp->hash[] is
only KSMBD_REQ_MAX_HASH_SZ bytes. A malformed or malicious login
response can set hash_sz well beyond that (up to 65535), so the memcpy()
reads past the end of the response object. ipc_validate_msg() does not
bound hash_sz, so reject any response whose hash_sz exceeds the on-stack
hash[] buffer before allocating and copying.
[ 2030.238706] BUG: KASAN: slab-out-of-bounds in ksmbd_alloc_user+0x278/0x680
[ 2030.240549] Read of size 65535 at addr ffff888121bb6680 by task kworker/4:1/18611
[ 2030.242296]
[ 2030.242710] CPU: 4 UID: 0 PID: 18611 Comm: kworker/4:1 Not tainted 7.1.0-next-20260623-virtme #96 PREEMPT(lazy)
[ 2030.242732] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 2030.242743] Workqueue: ksmbd-io handle_ksmbd_work
[ 2030.242763] Call Trace:
[ 2030.242769] <TASK>
[ 2030.242776] dump_stack_lvl+0xa2/0xd0
[ 2030.242794] print_address_description+0x77/0x200
[ 2030.242815] ? ksmbd_alloc_user+0x278/0x680
[ 2030.242831] print_report+0x58/0x70
[ 2030.242848] kasan_report+0x117/0x150
[ 2030.242869] ? ksmbd_alloc_user+0x278/0x680
[ 2030.242888] kasan_check_range+0x3c7/0x3f0
[ 2030.242908] ? ksmbd_alloc_user+0x278/0x680
[ 2030.242925] __asan_memcpy+0x29/0x70
[ 2030.242942] ksmbd_alloc_user+0x278/0x680
[ 2030.242960] ksmbd_login_user+0xc3/0x120
[ 2030.242978] ntlm_authenticate+0x5e6/0x1b00
[ 2030.243017] ? __pfx_ntlm_authenticate+0x10/0x10
[ 2030.243035] ? ksmbd_session_lookup+0x188/0x1d0
[ 2030.243054] ? __pfx_ksmbd_session_lookup+0x10/0x10
[ 2030.243090] ? __sanitizer_cov_trace_switch+0x7b/0x140
[ 2030.243108] smb2_sess_setup+0x1e4a/0x27b0
[ 2030.243126] ? copy_from_kernel_nofault+0x199/0x300
[ 2030.243156] ? __pfx_smb2_sess_setup+0x10/0x10
[ 2030.243173] ? get_smb2_cmd_val+0xe3/0x1c0
[ 2030.243208] handle_ksmbd_work+0x954/0x1280
[ 2030.243230] ? __pfx_handle_ksmbd_work+0x10/0x10
[ 2030.243249] ? process_scheduled_works+0xa07/0x1490
[ 2030.243270] ? process_scheduled_works+0xa07/0x1490
[ 2030.243291] process_scheduled_works+0xa70/0x1490
[ 2030.243320] ? __pfx_process_scheduled_works+0x10/0x10
[ 2030.243340] ? do_raw_spin_lock+0x130/0x300
[ 2030.243358] ? lock_is_held_type+0x7b/0x110
[ 2030.243388] worker_thread+0x932/0xe20
[ 2030.243415] kthread+0x38a/0x470
[ 2030.243431] ? __pfx_worker_thread+0x10/0x10
[ 2030.243451] ? __pfx_kthread+0x10/0x10
[ 2030.243467] ret_from_fork+0x484/0x910
[ 2030.243485] ? __pfx_ret_from_fork+0x10/0x10
[ 2030.243501] ? __switch_to+0xc77/0x12c0
[ 2030.243523] ? __pfx_kthread+0x10/0x10
[ 2030.243540] ret_from_fork_asm+0x1a/0x30
[ 2030.243564] </TASK>
[ 2030.243570]
[ 2030.290164] Allocated by task 19279:
[ 2030.290911] kasan_save_track+0x3e/0x80
[ 2030.292179] __kasan_kmalloc+0x72/0x90
[ 2030.293217] __kvmalloc_node_noprof+0x3ff/0x6b0
[ 2030.294467] handle_generic_event+0x59b/0x750
[ 2030.295345] genl_family_rcv_msg_doit+0x238/0x340
[ 2030.296553] genl_rcv_msg+0x606/0x7b0
[ 2030.297129] netlink_rcv_skb+0x22b/0x4a0
[ 2030.298500] genl_rcv+0x2d/0x40
[ 2030.299273] netlink_unicast+0x7ba/0x930
[ 2030.300019] netlink_sendmsg+0x8c3/0xb00
[ 2030.301073] __sock_sendmsg+0xec/0x140
[ 2030.301579] __sys_sendto+0x357/0x470
[ 2030.302255] __x64_sys_sendto+0xe3/0x100
[ 2030.303425] do_syscall_64+0x135/0x460
[ 2030.304763] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2030.305594]
[ 2030.305819] The buggy address belongs to the object at ffff888121bb6640
[ 2030.305819] which belongs to the cache kmalloc-192 of size 192
[ 2030.309595] The buggy address
---truncated--- |
