| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Ensure cmd stream ends with a stop op
While the QSIZE register setting should prevent an out of bounds access
of the command stream, it is not clear whether the h/w generates an
interrupt in this case as is required (to prevent a timeout). As a stop op
is expected end of the command stream, let's just ensure it is present. A
stop op in the middle of the command stream also makes no sense. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Ensure SRAM size is 0 on mapping failure
On a mapping failure of the SRAM, the SRAM size is left as non-zero. The
probe will succeed as the error return is not checked since having SRAM is
not a hard requirement. The non-zero size allows jobs to access SRAM which
is left pointing to physical base address 0x0. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev
The command and ACL RPMsg endpoints store struct btqcomsmd as their
callback private data. The receive callbacks dereference btq->hdev
without taking an hci_dev reference.
The current teardown order frees the hci_dev before destroying the RPMsg
endpoints in both the hci_register_dev() error path and the driver remove
path. If WCNSS delivers data in that window, the endpoint callback can
run with an already freed hci_dev and pass it to the Bluetooth core.
For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears
the callback under the channel recv_lock. The receive path holds the same
lock while invoking the callback, so destroying the endpoints first both
prevents new callbacks and serializes with any callback already running.
Destroy the command and ACL endpoints before hci_free_dev(). Keep
hci_unregister_dev() first during remove so the HCI core stops issuing
operations before the transport endpoints are shut down. In the full
registration-error cleanup path, return directly after freeing the hci_dev
to avoid falling through to the partial-construction labels and destroying
the endpoints twice. |
| In the Linux kernel, the following vulnerability has been resolved:
bootconfig: Fix integer overflow in initrd size check
Sashiko reported that in get_boot_config_from_initrd(), a crafted initrd
with a huge bootconfig size (such as 0xFFFFFFFF) can cause the pointer
arithmetic:
data = ((void *)hdr) - size;
to wrap around on 32-bit systems (or when pointer subtraction overflows).
Because data wraps around, the subsequent bounds check:
if ((unsigned long)data < initrd_start)
evaluates to false, bypassing the check. The kernel then calls
xbc_calc_checksum(data, size), which attempts to read 4GB of memory,
hitting unmapped pages and triggering a fatal kernel page fault during
early boot. Furthermore, on 64-bit systems with an initrd > 4.29 GB, an
unbounded 32-bit size can similarly bypass the initrd_start check.
Fix this by:
1. Ensuring the initrd is at least large enough to contain the bootconfig
footer and verifying hdr is within the initrd bounds.
2. Checking that size does not exceed XBC_DATA_MAX and does not exceed
the available space between initrd_start and hdr before performing
pointer subtraction. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: don't return -EINVAL for successful nested thaw
Commit 7366f8b6fc6a ("fs: handle freezing from multiple devices")
replaced the freeze_holders bitmask with per-holder counters to allow
nested freezes. In the bitmask version, a thaw that released a shared
hold while another holder remained returned 0. Since the rework,
thaw_super_locked() drops the freeze reference via freeze_dec() but
then returns -EINVAL when other freezers remain, misinforming the
caller: the thaw did succeed, the superblock just stays frozen for the
remaining holders.
This breaks bdev-initiated freezing. When a filesystem is frozen with
FIFREEZE and additionally frozen via bdev_freeze() -- which nests by
design, see fs_bdev_freeze() -- the subsequent bdev_thaw() receives
-EINVAL from the holder op although its freeze reference was dropped,
and therefore keeps bd_fsfreeze_count elevated. Then device-mapper's
unlock_fs() ignores bdev_thaw()'s return value, so nothing rebalances
the count. After the user's FITHAW and umount, the block device can
never be mounted again:
dm-1: Can't mount, blockdev is frozen
There is no way for userspace to drop the leaked count; only
destroying the block device (or a reboot) recovers the device.
Reproducer (any kernel since v6.8):
dmsetup create dut --table "0 $(blockdev --getsz "$DEV") linear $DEV 0"
mkfs.ext4 /dev/mapper/dut
mount /dev/mapper/dut /mnt
fsfreeze --freeze /mnt # freeze_ucount == 1
dmsetup suspend dut # bd_fsfreeze_count == 1, ucount == 2
dmsetup resume dut # ucount 2 -> 1, but thaw_super()
# returns -EINVAL, so bdev_thaw()
# keeps bd_fsfreeze_count at 1
fsfreeze --unfreeze /mnt # filesystem thaws fine
umount /mnt
mount /dev/mapper/dut /mnt # EBUSY, forever
The same happens with fsfreeze held across an LVM snapshot of the
origin volume.
fs_bdev_thaw()'s documentation already describes the intended
semantics: "If this function returns zero it doesn't mean that the
filesystem is unfrozen as it may have been frozen multiple times".
Restore them by returning 0 when a nested thaw drops its hold while
other freezers remain. Thawing without holding a freeze still fails
with -EINVAL as may_unfreeze() rejects that case before the reference
count is touched. |
| In the Linux kernel, the following vulnerability has been resolved:
genetlink: pin family module during policy dump
The generic netlink controller's policy dump keeps pointers to the target
family's operation and policy tables in its callback state. A dump may be
split across multiple skbs and remain pending after the initial request.
Netlink pins the module which owns the dump callback, but in this case
that is the controller's owner rather than the target family's owner. The
target family can consequently be unregistered and its module unloaded
while a policy dump is pending. Advancing the dump then dereferences
policy memory from the unloaded module.
Take a reference to the target family's module when the dump starts.
Drop it from the error and done paths. This matches the lifetime for which
the dump context retains the family and policy pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/drm_exec: fix up contended obj when num_objects is 0
drm_exec_prepare_array() silently returns success without calling
drm_exec_lock_contended() when num_objects is zero. This breaks the
invariant upheld by drm_exec_lock_obj(), where every entry point into
the locking sequence must first attempt to lock any previously
contended object before proceeding.
Drivers that chain multiple drm_exec_prepare_array() calls per
drm_exec_until_all_locked() iteration (e.g. amdgpu's userq signal/wait
ioctls, which prepare separate read and write BO arrays) can pass an
empty array for one of the two calls. If contention is hit while
preparing the non-empty array, exec->contended is set and the loop
retries; on retry, the empty-array call preceding it is a no-op that
never clears exec->contended, so drm_exec_retry_on_contention()
immediately jumps back to the top of the loop without ever reaching
the call that would resolve the contention. This spins forever.
Fix it by having drm_exec_prepare_array() call drm_exec_lock_contended()
directly when num_objects is zero, so a pending contended object dont
loop infinitely. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: analogix_dp: fix unchecked bound endpoint name length
rockchip_dp_drm_encoder_enable() uses sprintf() to format a device tree
path into a 32-byte stack buffer. Device tree paths are not limited to
this size, so a sufficiently long path can overflow the buffer.
Use snprintf() with the destination size to truncate the generated name
and keep the writes within bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: end write accounting from ->ki_complete
Commit b000145e9907 moved both the fsnotify calls and the write
accounting out of the kiocb completion handler and into the
io_req_rw_complete() task_work. However, only the fsnotify part actually
needed to move as it may sleep. Ending the write accounting is just a
percpu_up_read() on the superblock writers sem.
Deferring it is a problem, because it makes dropping SB_FREEZE_WRITE
protection depend on the ring owner getting to running task_work. But
the task may be blocked in freeze_super(), causing it to never get to
that:
task io-wq worker
--------------------------------------------------------------
io_write()
io_kiocb_start_write() (takes sb_writers, hidden from
lockdep by __sb_writers_release)
write_iter() -> -EIOCBQUEUED
ioctl(FS_IOC_SHUTDOWN)
bdev_freeze()
freeze_super()
percpu_down_write() <- waits for the reader above
io_write()
kiocb_start_write()
percpu_down_read() <- queued
behind the
writer
<bio completes>
io_complete_rw()
queues io_req_rw_complete() <- never runs, task is in D state
End the write from io_complete_rw() instead, and leave only the fsnotify
calls in task_work. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Check resize_disabled before publishing the new subbuf order
ring_buffer_subbuf_order_set() stores the new order and only then walks
the CPUs, returning -EBUSY if any of them has resizing disabled. A user
mapped buffer has resizing disabled, and __rb_map_vma() reads
buffer->subbuf_order without buffer->mutex, so an mmap of an already
mapped CPU racing the failing order change sizes the mapping with the
new order and inserts pages past the sub-buffer into the VMA.
Check the CPUs before storing the new order. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: use option bits for CFM/MRP frame handlers
CFM and MRP register a global br_frame_type whose hlist_node is linked
into the per-bridge frame_type_list when the first MEP/MRP instance is
created. Enabling the protocol on multiple bridges therefore inserts the
same node into multiple lists. Unregistering it on one bridge then
corrupts list state belonging to another.
These handlers can only be installed once per bridge, and they are
uncommon. Track their per-bridge enable state with net_bridge option
bits, which already live on the Rx hot cache line, and dispatch the
matching handler directly from the receive path. Check both bits
together first as an unlikely case.
Remove the generic frame_type_list and br_frame_type helpers, which
have had no other users since CFM and MRP were added. That shrinks
struct net_bridge by 8 bytes and drops the list walk from the fast
path. When neither protocol is compiled in, BR_CFM_MRP_OPTS is 0 and
the compiler prunes the branch. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Reserve extra CQ slot for the fence completion CQE
The RX completion queue is sized to hold exactly one CQE per posted RX WQE.
MANA_FENCE_RQ makes hardware post an additional CQE_RX_OBJECT_FENCE after
the packet CQEs. The current sizing reserves no extra slot for it and in
rare cases, CQ has no guaranteed slot for the fence CQE when it is full of
packet CQEs. This can lead to dropping the fence completion while the
driver waits holding RTNL lock throughout the timeout duration.
Reserve one extra CQE slot for CQE_RX_OBJECT_FENCE. mana_gd_alloc_memory()
requires queue_size to be a power-of-two and at least MANA_PAGE_SIZE;
the reservation pushes cq_size past a power-of-two, so round up the CQ size
in mana_create_rxq(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs: autofs: fix memory leak in autofs_fill_super()
In autofs_fill_super(), we create a new inode using
autofs_new_ino(), however, if we fail to create root_inode,
(that is, root_inode failure path), we return -ENOMEM without
freeing the new inode(ino) that we created causing a memory leak.
Fix this by adding autofs_free_ino() to free the inode we created
in root_inode failure path before returning ENOMEM. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: preserve LZMA decoders on resize failure
The pool-resize path frees each stream's old decoder before allocating
its replacement. If an allocation fails after some streams have already
been replaced, the failed stream is put back on the list with state ==
NULL. z_erofs_lzma_max_dictsize is still advanced as if the whole
pool had been resized.
An existing LZMA mount can select the broken stream and pass
NULL to xz_dec_microlzma_reset(). A retry at the same size also
skip another resize attempt. Since the global maximum was advanced,
thus, the invalid state is left unrepaired.
Allocate each replacement before freeing the old decoder, temporarily
retaining one old decoder during allocation. Stop at the first failure
and advance z_erofs_lzma_max_dictsize only after all streams satisfy
the request.
Record each stream's dictionary capacity so retries can skip streams
already enlarged before a partial failure. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: vfb: defer cleanup until the last reference
FBIOGETCMAP takes a shallow snapshot of info->cmap and performs the
usercopy after dropping info->lock. vfb_remove() frees the colormap
immediately after unregistering the framebuffer, even when an open file
still holds a reference to fb_info. A concurrent driver unbind can
therefore free the colormap while the ioctl copies it to userspace.
KASAN reports:
BUG: KASAN: slab-use-after-free in _copy_to_user
Read of size 512 by task poc/125
_copy_to_user (./include/linux/instrumented.h:129 ./include/linux/uaccess.h:201 lib/usercopy.c:24)
fb_cmap_to_user (./include/linux/uaccess.h:230 drivers/video/fbdev/core/fbcmap.c:211)
do_fb_ioctl (drivers/video/fbdev/core/fb_chrdev.c:114)
Allocated by task 1:
fb_alloc_cmap_gfp (./include/linux/slab.h:973 ./include/linux/slab.h:1290 drivers/video/fbdev/core/fbcmap.c:108)
vfb_probe (drivers/video/fbdev/vfb.c:459)
Freed by task 124:
fb_dealloc_cmap (drivers/video/fbdev/core/fbcmap.c:151)
vfb_remove (drivers/video/fbdev/vfb.c:489)
unregister_framebuffer() drops the registration reference, and fbdev calls
fb_destroy after the last put_fb_info(). Move the registered framebuffer's
cleanup into an fb_destroy callback so its colormap and screen buffer stay
alive until all file references have been released. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: 6lowpan: fix NULL dereference in lowpan_newlink
TUNSETLINK allows a TUN device to change its link-layer type to
ARPHRD_IEEE802154 without initializing ieee802154_ptr. lowpan_newlink()
checks only the device type before dereferencing the pointer, so an
RTM_NEWLINK request can trigger a NULL pointer dereference.
Reject devices without ieee802154_ptr along with devices of the wrong type. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: reject invalid states in connection template sync records
IPVS sync receivers validate protocol states before creating or updating a
connection. For connection templates, however, they only log states outside
the template state range and still store the value in the connection.
A template can be returned by ordinary connection lookup. TCP and SCTP then
use the invalid state as an index into their transition tables.
Reject invalid template states in both sync protocol versions before
looking up or modifying a connection. The version 1 path handles both
IPv4 and IPv6 records. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix missing scrub of temp buffers with AES ctr and gcm algorithm
In function ctr_aes_crypt() there is a buffer used to process
remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and
thus could lead to expose of unwanted data. When the buffer is used
explicitly scrub it at the end of the code block to avoid exposure of
maybe sensitive data.
In a similar way the function gcm_aes_crypt() hat an error path where
the CPACF param block was not scrubbed. Instead of return early now
these error paths go to end of function where explicit scrubbing is
done. Similar with the buffers which are part of the gcm_sg_walk
structs from the variables gw_in and gw_out. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: RISC-V: store available counter mask as bitmap
The available-counter mask was a single unsigned long, but iteration
uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object.
Filling with an unsigned-long bit at index 32 and above is also wrong.
Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word
into CFG_MATCH when checking events, when allocating an index, and when
stopping all counters. Set the counter base to i times BITS_PER_LONG.
Share the CFG_MATCH ecall through a small helper so the 32-bit argument
split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits
above XLEN set, so the first word alone is not enough.
[pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix missing kunmap in afs_dir_search_bucket()
Fix afs_dir_search_bucket() to kunmap the block it's using in the "bad:"
path. |
