| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue in MongoDB Server's query execution engine could allow an authenticated user with read and write privileges to cause an internal reference to be used after the underlying memory has been freed, when running certain queries against time-series collections. This could result in a server crash or disclosure of freed memory contents within query results. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-vdpa: protect config_ctx from being freed under the config callback
vhost_vdpa_config_cb() loads v->config_ctx and signals it without taking
a reference and without holding any lock:
struct eventfd_ctx *config_ctx = v->config_ctx;
if (config_ctx)
eventfd_signal(config_ctx);
VHOST_VDPA_SET_CONFIG_CALL replaces that field and drops what is normally
the last reference to the old context:
swap(ctx, v->config_ctx);
if (ctx)
eventfd_ctx_put(ctx);
eventfd_ctx_put() drops the last kref and frees the context immediately,
with no RCU grace period, so a callback that has already loaded the
pointer goes on to dereference freed memory. The two sides share no
lock: the ioctl runs under vhost_dev.mutex, while the parent invokes the
callback from its own interrupt or workqueue context.
This is not the reopen refcount underflow fixed by commit f6bbf0010ba0
("vhost-vdpa: fix use-after-free of v->config_ctx"), which was about
vhost_vdpa_config_put() leaving a stale pointer behind. Here the pointer
is maintained correctly and it is the read side that is unprotected.
With VDUSE as the parent this is reachable from userspace with access to
/dev/vduse (root by default). VDUSE_DEV_INJECT_CONFIG_IRQ queues
dev->inject, and vduse_dev_irq_inject() runs the callback under VDUSE's
own dev->irq_lock, which vhost does not hold. vduse_dev_reset() does
flush_work(&dev->inject), but VHOST_VDPA_SET_CONFIG_CALL never goes
through reset, so an inject already in flight is not waited for. A
process that injects config interrupts on the VDUSE fd while another
thread swaps the call fd on the vhost-vdpa fd hits it in seconds:
BUG: KASAN: slab-use-after-free in native_queued_spin_lock_slowpath
Read of size 4 at addr ffff888107d21808 by task kworker/u17:1/2993
Workqueue: vduse-irq vduse_dev_irq_inject
Call Trace:
native_queued_spin_lock_slowpath+0x97/0x5b0
_raw_spin_lock_irqsave+0xd4/0xe0
eventfd_signal_mask+0x69/0x120
vhost_vdpa_config_cb+0x34/0x50
vduse_dev_irq_inject+0x46/0x60
process_one_work+0x468/0x950
Allocated by task 2992:
do_eventfd+0x50/0x200
__x64_sys_eventfd2+0x2e/0x40
Freed by task 2992:
eventfd_ctx_put+0xb9/0xc0
vhost_vdpa_unlocked_ioctl+0x116c/0x2190
Add a spinlock covering every access to config_ctx, so the callback
either signals a context that is still alive or observes NULL, and the
put happens only once no callback can reach the old value.
Clearing the parent's callback before the put would not be enough: of the
in-tree set_config_cb() implementations only VDUSE takes a lock, the rest
store the pointer unlocked, so that would not order against an in-flight
invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-vdpa: don't install the eventfd_ctx_fdget() error in config_ctx
vhost_vdpa_set_config_call() swaps the eventfd_ctx_fdget() return value
into v->config_ctx before checking it, so on failure the field briefly
holds an ERR_PTR:
ctx = fd == VHOST_FILE_UNBIND ? NULL : eventfd_ctx_fdget(fd);
swap(ctx, v->config_ctx);
if (!IS_ERR_OR_NULL(ctx))
eventfd_ctx_put(ctx);
if (IS_ERR(v->config_ctx)) {
long ret = PTR_ERR(v->config_ctx);
v->config_ctx = NULL;
return ret;
}
Commit 0bde59c1723a ("vhost-vdpa: set v->config_ctx to NULL if
eventfd_ctx_fdget() fails") added that clearing, and spelled out the
invariant the rest of the file relies on: "we consider 'v->config_ctx'
valid if it is not NULL". The window between the swap and the clearing
still breaks it. vhost_vdpa_config_cb() only tests for NULL, so a config
interrupt delivered inside the window hands the ERR_PTR to
eventfd_signal().
Check the fd before installing it instead. That closes the window and
matches how vhost_vring_ioctl() handles the same failure for the vq call
fd.
It also stops a rejected fd from tearing down a config interrupt that was
working: until now the swap replaced the live context and put it, so
after an EBADF the device silently stopped delivering config interrupts
until userspace installed a new fd. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio: fix use-after-free in unregister_virtio_device()
device_unregister() is device_del() plus put_device(). When the caller
holds no extra reference, that drops the last one and runs the release
callback, which for several transports frees the memory the embedded
struct virtio_device sits in. unregister_virtio_device() then calls
virtio_debug_device_exit(), which reads dev->debugfs_dir out of the freed
object.
Affected transports are the ones whose release callback frees and whose
remove path takes no reference: virtio_mmio, virtio_vdpa, virtio_uml,
mlxbf-tmfifo and virtio_ccw. virtio_pci is unaffected because
virtio_pci_remove() brackets the call with get_device() and put_device().
Remove the debugfs entries before the device can go away. They are only
accessed through the protected debugfs interface, so
debugfs_remove_recursive() waits for in-progress file operations before
returning. Tearing them down while the device is still alive is therefore
safe.
Reproduced on User-Mode Linux with CONFIG_KASAN and CONFIG_VIRTIO_DEBUG
by unbinding a virtio-uml device:
BUG: KASAN: slab-use-after-free in virtio_debug_device_exit+0x36/0x4d
Read of size 8 at addr 00000000616e0b10 by task init/1
__asan_report_load8_noabort
virtio_debug_device_exit+0x36/0x4d
unregister_virtio_device+0x48/0x75
virtio_uml_remove
platform_remove
device_release_driver_internal
unbind_store
Freed by task 1:
kfree
virtio_uml_release_dev
device_release
kobject_put
put_device
device_unregister
With this applied, the report is gone and unbind is clean. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: Fix potential UAF in pec_store
Sashiko reports:
In pec_store(), a guard(mutex)(&hwdev->lock) is taken. If the chip write
operation returns an error other than -EOPNOTSUPP, the code jumps to the
put label, which calls put_device(hdev). If this drops the final reference,
the device is freed. When the function then returns, the guard cleanup
function runs and attempts to unlock the freed mutex.
Use scoped_guard() instead of guard() to avoid the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Do not reallocate GA log buffers on resume
Commit c5e1a1eb9279 ("iommu/amd: Simplify and Consolidate Virtual APIC
(AVIC) Enablement") moved the GA log allocation from iommu_init_pci()
to enable_iommus_vapic(), which is called on every resume.
iommu_init_ga_log() assigns iommu->ga_log and iommu->ga_log_tail
unconditionally. Each resume therefore replaces the boot-time pointers
and leaks both old allocations. The function also uses GFP_KERNEL from a
syscore resume callback, where interrupts are disabled and the non-boot
CPUs are offline.
Return early if both buffers are already allocated. Clear the pointers
in free_ga_log() so a partial allocation failure cannot leave ga_log
dangling. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Decoupling ep1_in_urb in caiaq dev
The epq_in_urb object belonging to the caiaq device is coupled within
the struct snd_usb_caiaqdev. After usb_submit_urb(epq_in_urb, GFP_KERNEL)
executes successfully, epq_in_urb is successfully added to the urbp_list
queue of the dummy HCD driver (userspace specifies dummy_hcd as the HCD
layer driver for the caiaq USB device).
When init_card() calls snd_usb_caiaq_send_command() which subsequently
fails due to a timeout, and proceeds to call snd_card_free() to release
the card, the embedded ep1_in_urb object is also freed. When the dummy
HCD driver detects that the URB has been unlinked, it returns the URB
(by usb_hcd_giveback_urb()), which triggers [1].
Decouple the ep1_in_urb object from the struct snd_usb_caiaqdev and switch
to using a pointer instead. Separately allocate and manage the memory for
ep1_in_urb to prevent the release of the snd_card memory object from
interfering with it.
midi_out_urb has the same issue as ep1_in_urb and is handled in the same
way.
[1]
BUG: KASAN: slab-use-after-free in usb_free_urb+0x24/0x120 drivers/usb/core/urb.c:96
Write of size 4 at addr ffff88803cee1050 by task ktimers/1/29
Call Trace:
usb_free_urb+0x24/0x120 drivers/usb/core/urb.c:96
dummy_timer+0xaac/0x4d50 drivers/usb/gadget/udc/dummy_hcd.c:2019
__run_hrtimer kernel/time/hrtimer.c:2067 [inline]
__hrtimer_run_queues+0x3eb/0xaf0 kernel/time/hrtimer.c:2124
hrtimer_run_softirq+0x1e1/0x2e0 kernel/time/hrtimer.c:2141
Allocated by task 36:
snd_card_new+0x7b/0x110 sound/core/init.c:184
create_card sound/usb/caiaq/device.c:429 [inline]
snd_probe+0x236/0x1af0 sound/usb/caiaq/device.c:544
Freed by task 36:
snd_card_free_when_closed sound/core/init.c:630 [inline]
snd_card_free+0x138/0x1d0 sound/core/init.c:662
snd_probe+0x162b/0x1af0 sound/usb/caiaq/device.c:553 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: drr: clamp quantum in change class
drr_change_class() rejects explicit quantum==0 but falls back to
psched_mtu() with no floor. With a crafted size table qdisc_pkt_len
reaches ~2 GiB, so quantum=1 (or a zero psched_mtu on a headerless
device) makes the deficit-refill loop spin under the qdisc lock.
Add clamp_t(u32, quantum, 256, 1<<20) after the zero reject and on the
fallback path. The explicit-zero reject is preserved.
Conditions to recreate the bug:
CONFIG_NET_SCH_DRR=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root drr
tc class add dev dummy0 parent 1: classid 1:1 drr quantum 1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: hhf: clamp quantum in change and init paths
hhf_change() accepts any quantum from userspace, including 1. With a
crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 makes
the deficit-refill loop spin ~2^31 times under the qdisc lock
(a soft lockup / denial of service).
Add max(256U, ...) in hhf_change() matching fq_codel_change(). Clamp
hhf_init() to [256, 1<<20] matching the siblings, and remove the old
fallback that only set quantum=256 on overflow.
Conditions to recreate the bug:
CONFIG_NET_SCH_HHF=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root hhf
tc qdisc change dev dummy0 root hhf quantum 1 stab data 32768 size_log 15 cell_log 0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sfq: clamp quantum in change path
sfq_change() accepts any non-negative quantum (only rejects
(int)ctl->quantum < 0). With a crafted size table qdisc_pkt_len reaches
~2 GiB, so quantum=1 makes the deficit-refill loop spin ~2^31 times
under the qdisc lock (a soft lockup / denial of service).
Add max(256U, ...) matching fq_codel_change(). Reject quantum > 1<<20
with -EINVAL, matching fq_codel_change() and the init clamp.
Conditions to recreate the bug:
CONFIG_NET_SCH_SFQ=y. Requires CAP_NET_ADMIN (namespace-local via
unshare -Urn suffices).
tc qdisc add dev dummy0 root sfq
tc qdisc change dev dummy0 root sfq quantum 1 stab data 32768 size_log 15 cell_log 0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put
In mlx5_eswitch_termtbl_put(), the zero-ref cleanup check reads
tt->ref_count after termtbl_mutex has been released. Two concurrent
callers on the same mlx5_termtbl_handle race: one decrements ref_count
to zero, removes the hash entry, and calls kfree(tt) while the other
has already dropped the mutex and is about to evaluate
if (!tt->ref_count), producing a use-after-free.
Fix this by capturing the result of the decrement into a stack-local
last variable before dropping the mutex. The cleanup decision is now
made entirely under termtbl_mutex, and tt is not touched after
kfree. |
| An issue in MongoDB Server's Queryable Encryption maintenance operations could allow an authenticated user with privileges on one encrypted collection to cause unauthorized modification or destruction of data belonging to a different collection. This is due to insufficient validation of certain internal metadata references before they are used to perform operations on other namespaces. |
| A flaw has been found in ningzichun student-management-system up to 98760f5711cf6dc8b4adca53a9e207ca49b02ebf. Affected by this vulnerability is an unknown functionality of the file example_lite.sql. Executing a manipulation can lead to use of default credentials. It is possible to launch the attack remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A security flaw has been discovered in YunaiV/zhijiantianya ruoyi-vue-pro up to 2026.08. Affected by this vulnerability is the function validOAuthClientFromCache of the file yudao-module-system/src/main/java/cn/iocoder/yudao/module/system/service/oauth2/OAuth2ClientServiceImpl.java of the component OAuth2 Client. The manipulation of the argument redirect_uri results in open redirect. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in YunaiV/zhijiantianya ruoyi-vue-pro up to 2026.08. The affected element is the function AiKnowledgeDocumentServiceImpl.readUrl of the file AiKnowledgeDocumentServiceImpl.java of the component AI Knowledge Module. This manipulation of the argument url causes server-side request forgery. The attack is possible to be carried out remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in DbGate up to 7.2.5-beta.5. This affects an unknown function of the file packages/api/src/controllers/runners.js of the component JSON Runner. Executing a manipulation of the argument comment.text/script.schedule can lead to code injection. The attack may be performed from remote. Upgrading to version 7.2.5-beta.6 mitigates this issue. This patch is called 70e7b6b58e464d7a015ba16e8d7574b420ee4877. Upgrading the affected component is advised. This issue is distinct from CVE-2026-47668. |
| IBM Guardium Data Protection 12.2 is vulnerable to SQL injection in the PESI service. An authenticated attacker could exploit this vulnerability to access sensitive information in the internal database. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: i3c: serialize probe with bus removal
mctp_i3c_probe() drops busdevs_lock after finding the matching bus. A
concurrent I3C_NOTIFY_BUS_REMOVE can then unregister and free the bus
netdev before probe passes its private data to mctp_i3c_add_device().
The latter consequently adds a list node through a freed mbus pointer.
Keep busdevs_lock held until the device has been added. This also
satisfies the __must_hold annotation on mctp_i3c_add_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix cmd_regs access racing BAR unmap on reset
pdsc_reset_prepare() and pdsc_reset_done()'s pdsc_map_bars() error path
clear/iounmap cmd_regs without devcmd_lock, and
pdsc_legacy_firmware_update()'s download loop derefs cmd_regs after
dropping and retaking the lock without re-checking. An FLR concurrent
with a devlink flash can unmap cmd_regs under an in-flight devcmd,
causing a NULL deref or a write to unmapped MMIO.
Take devcmd_lock across the BAR unmap/remap, and re-check cmd_regs in
the download loop. Only the PF maps cmd_regs and runs devcmd, so skip
the unmap on a VF, as pdsc_remove() and pdsc_reset_done() already do.
A reset that completes entirely within the unlocked window is not a
correctness problem for the image: the device clears its update session,
so a resumed download is rejected, and it verifies the staged image
before writing a flash slot, reporting PDS_RC_BAD_FW rather than
activating it.
pdsc_unmap_bars() also clears info_regs, intr_status and intr_ctrl. The
interrupt and start/stop readers of those are quiesced before the unmap
by pdsc_fw_down(), which frees the interrupts and tears down the queues.
The debugfs readers are not, since those files outlive a reset; that is
pre-existing and out of scope here. |
