| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject arena frees below the arena base
bpf_arena_free_pages() accepts scalar arena addresses. The runtime
masks the address to the low 32 bits and reconstructs a full user
address from the arena base before returning the range to the arena
free tree.
When the scalar value is below the low 32 bits of the arena base,
full_uaddr falls below user_vm_start. The existing upper-end clipping
then turns this into an out-of-range free-tree offset. A later
allocation can reuse that offset and return an address below the arena
mapping.
Reject such frees before computing the clipped range. |
| In the Linux kernel, the following vulnerability has been resolved:
speakup: keyhelp: guard letter_offsets possible out-of-range indexing
help_init() builds letter_offsets[] by using the first byte of each
function name as an index via `(start & 31) - 1`. If function_names are
overridden from sysfs (root) with a name starting outside [a–z], the
index underflows or exceeds the array, leading to OOB write.
Function names can be overridden with the following commands as root:
modprobe speakup_soft
echo "0 _bad" > /sys/accessibility/speakup/i18n/function_names
# then press Insert+2 on /dev/tty
This fix checks the first letter in help_init(), and if it is not in the
[a–z] range the function returns an error to the caller. Eventually this
error is propagated to drivers/accessibility/speakup/main.c:2217, which
causes a bleep sound. |
| In the Linux kernel, the following vulnerability has been resolved:
dax/fsdev: clear vmemmap_shift when binding static pgmap
Clear pgmap->vmemmap_shift for static DAX devices. When rebinding a static
device from device_dax (which may set vmemmap_shift based on alignment) to
fsdev_dax, the stale vmemmap_shift persists on the shared pgmap. Explicitly
zero it before devm_memremap_pages() so the vmemmap is built for order-0
folios as fsdev requires. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: validate MADT IOAPIC entry bounds
The IOAPIC hotplug lookup parses both MADT and _MAT records directly.
The MADT walk previously used a subtable's declared length to advance
the cursor after only locating a generic header. The _MAT path likewise
passed a generic header to the IOAPIC helper.
Validate that a current record has a complete generic header, that its
declared length is contained in the available record range, and that a
typed IOAPIC record contains the full fixed IOAPIC body before reading
its fields. Use the same relation for both MADT and _MAT provider
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: reject login PDUs declaring more data than was received
isert_login_recv_done() records how many bytes the HCA actually placed in
the login buffer, but nothing compares that against the length the login
PDU's BHS declares. isert_rx_login_req() copies min(login_req_len,
MAX_KEY_VALUE_PAIRS) bytes into login->req_buf, and the login code then
reads the declared length back out of that buffer - for the first PDU in
iscsi_target_locate_portal(),
payload_length = ntoh24(login_req->dlength);
tmpbuf = kmemdup_nul(login->req_buf, payload_length, GFP_KERNEL);
and for the ones after it in iscsi_decode_text_input(), reached from
iscsi_target_do_login().
login->req_buf is a fixed MAX_KEY_VALUE_PAIRS (8192) byte allocation, so
an initiator that declares more than it sends reads off the end of it,
before authentication and with the length under its control:
BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80
Read of size 8193 at addr ffff8881056a8000 by task iscsi_np/167
__asan_memcpy+0x23/0x60
kmemdup_nul+0x43/0x80
iscsi_target_locate_portal+0x48d/0x1180
iscsi_target_login_thread+0x19a9/0x3350
Allocated by task 167:
__kmalloc_cache_noprof+0x158/0x370
iscsi_target_login_thread+0x971/0x3350
which belongs to the cache kmalloc-8k of size 8192
allocated 8192-byte region
Falsifying the second login PDU instead reaches the other reader, on the
same buffer:
BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80
Read of size 8193 at addr ffff888104d10000 by task kworker/1:1/50
Workqueue: isert_login_wq iscsi_target_do_login_rx
__asan_memcpy+0x23/0x60
kmemdup_nul+0x43/0x80
iscsi_decode_text_input+0xc6/0x11c0
iscsi_target_do_login+0x261/0x1470
iscsi_target_do_login_rx+0x51d/0x7d0
iscsit over TCP is not exposed: iscsit_get_login_rx() validates the
declared length with iscsi_target_check_login_request() and then reads
exactly that many bytes off the socket, so the declared length governs
how much arrives rather than how much is copied out of an already-filled
buffer. isert does not call iscsi_target_check_login_request() at all.
Reject a login PDU whose declared DataSegmentLength exceeds what was
received, in both paths that reach isert_rx_login_req():
isert_get_login_rx() for the first login PDU and isert_login_recv_done()
for the ones after it. dlength <= login_req_len is allowed because the
received count can include up to three bytes of iSCSI padding.
Once the check is in place the copy out can no longer exceed the copy in:
the posted login SGE is ISER_RX_PAYLOAD_SIZE, so login_req_len cannot
exceed MAX_KEY_VALUE_PAIRS and the min() in isert_rx_login_req() is
login_req_len.
Like the existing short-PDU check added by 29e7b925ae6d, the reject in
isert_login_recv_done() returns without completing login_req_comp, so a
malformed subsequent PDU leaves the login to be torn down by the login
timer rather than failing immediately. The first-PDU path returns an
error and fails straight away.
Reproduced on 7.2.0-rc4 with soft-RoCE (rdma_rxe) under KASAN, using an
initiator that sends the real key=value payload while declaring 8193 in
the BHS, on the first login PDU and on the second in separate runs. The
reported read size tracks the declared value exactly; 16384 and 61440
behave the same. Unpatched 3 of 3 runs report on each of the two paths,
patched 0 of 3 on both, run alternately in a single session, and a normal
login still completes on the patched build. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Validate connected lane counts
The connected lane count is used by TX equalization code to index arrays
sized by UFS_MAX_LANES. Reject zero and out-of-range RX or TX lane counts
before they can be propagated. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Validate string descriptors
The string descriptor length includes a two-byte header while the UTF-16
payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code
units, not bytes. Passing the payload byte count can make it read beyond
the descriptor buffer.
Validate that the payload has an even byte count, pass a code-unit count to
the converter, and allocate sufficient UTF-8 output space.
The raw string buffer starts after the descriptor header but its size is
bLength. Copying bLength bytes from that pointer can read beyond the
response buffer.
Allocate a zeroed bLength-sized buffer and copy only the UTF-16
payload. This preserves the raw buffer size consumed by the RPMB device-ID
ABI while avoiding the overread. |
| A security flaw has been discovered in Totolink A3002MU Hh-B20211125.1046. Affected by this vulnerability is the function formWlWds of the file /boafrm/formWlWds. The manipulation of the argument submit-url results in buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: bound TLV walk in mt7996_mcu_get_chip_config
The response TLV loop advanced by tlv->len without a minimum, so a
theoretical firmware response containing a zero-length TLV could spin
forever, hanging the CPU during device probe.
The u32 payload was also read without bounds checking.
Reject a short fixed field, stop on a TLV whose length underruns the
header or overruns the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: dw: avoid shift-out-of-bounds when DAA assigns no devices
On an empty bus ENTDAA assigns nothing, so cmd->rx_len (the count
of addresses left unassigned) equals master->maxdevs.
The GENMASK() index master->maxdevs - cmd->rx_len - 1 then becomes -1,
which trips up UBSAN. This happens every time on boot on a Gigabyte/AMD
server:
UBSAN: shift-out-of-bounds in drivers/i3c/master/dw-i3c-master.c:905:12
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 7 UID: 0 PID: 963 Comm: (udev-worker) Not tainted 7.0.11-200.fc44.x86_64 #1 PREEMPT(lazy)
Hardware name: Giga Computing E163-Z34-AAH1-000/MZ33-DC1-000, BIOS R32_F45 04/01/2026
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
ubsan_epilogue+0x5/0x2b
__ubsan_handle_shift_out_of_bounds.cold+0xd7/0x1ab
dw_i3c_master_daa.cold+0x1b/0x96 [dw_i3c_master]
i3c_master_do_daa_ext.part.0+0x3e/0xf0 [i3c]
Skip the mask when no new device was assigned. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry()
table->offset[i] is a u32 from firmware, but was stored into a signed
int. A crafted offset like 0xFFFFFFF0 becomes -16, placing hdr 16 bytes
before the table buffer. The subsequent avail check was bypassed
because the negative int was promoted to a large size_t in the
expression "table_sz - offset - sizeof(*hdr)", yielding a large positive
avail and letting the out-of-bounds hdr->type read proceed undetected.
Store the offset as u32 and validate it with unsigned comparisons before
any pointer arithmetic. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/cluster: keep heartbeat local node stable
o2nm_node_local_store() handles local=0 by stopping o2net and setting
cl_local_node to O2NM_INVALID_NODE_NUM, but it leaves cl_has_local set.
That stale state makes o2nm_this_node() return 255, blocks a later local=1
attempt with -EBUSY, and can feed 255 to heartbeat users that call
o2nm_this_node() dynamically.
Clearing cl_has_local is required when the local node is reset. But
heartbeat threads can still be running at that point. They pin the local
node config item at startup, yet o2hb_do_disk_heartbeat() and thread
teardown re-read o2nm_this_node() for the local slot and for
o2nm_undepend_this_node(). Once local=0 has cleared the live local-node
state, those dynamic reads return O2NM_MAX_NODES, which is also the
invalid node number 255.
Store the local node number in the heartbeat region when the region
starts. Use that stable node for heartbeat slot writes/checks,
negotiation messages, and the final configfs undepend. Stop the heartbeat
loop when the current local node no longer matches the stored node, and
clear cl_has_local together with cl_local_node in the local=0 path so
nodemanager state matches node removal.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in o2hb_do_disk_heartbeat+0x372/0xb30
RIP: 0010:memset+0xf/0x20
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xd0/0x630
o2hb_do_disk_heartbeat+0x372/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x188/0x2f0
kasan_report+0xe4/0x120
o2hb_do_disk_heartbeat+0x5/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
o2hb_thread+0x14e/0x770
kthread_affine_node+0x139/0x180
lockdep_hardirqs_on_prepare+0xda/0x190
trace_hardirqs_on+0x18/0x130
kthread+0x19d/0x1e0
ret_from_fork+0x37a/0x4d0
__switch_to+0x2d5/0x6f0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: refactor the two workqueues and init sequence
Multiple issues have been found within the hid-asus driver:
- unchecked size in asus_raw_event()
- unclean teardown of asus_probe on failure
- possible use-after-free in asus_probe
- multiple workqueue used for jobs where one was enough
- sleeping calls in atomic context
- packets of incorrect size being sent to the keyboard controller
Join the two workqueues into one reusing the stopping mechanism
of the brightness workqueue, use the joined workqueue to also
move the asus_wmi_send_event() sleeping call away from atomic
context and add a size check in asus_raw_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: snoc: use memcpy_fromio() for MSA ramdump
On WCN3990/SNOC the MSA region is mapped with devm_memremap(MEMREMAP_WT).
On arm64 such a mapping is not Normal-cacheable, so unaligned accesses to
it are not permitted. ath10k_msa_dump_memory() copies the region with a
plain memcpy(), whose optimized __pi_memcpy_generic implementation issues
wide/unaligned loads. This triggers an alignment fault (FSC=0x21) Oops in
ath10k_snoc_fw_crashed_dump() while collecting the devcoredump:
Unable to handle kernel paging request ... FSC=0x21: alignment fault
pc : __pi_memcpy_generic
lr : ath10k_snoc_fw_crashed_dump [ath10k_snoc]
The Oops both leaves the firmware RAM dump buffer zeroed (no dump is
captured) and crashes the kernel, which in turn breaks modem SSR
recovery.
Use memcpy_fromio(), which only performs accesses that are valid for such
a device-memory mapping. The generic memcpy_fromio() implementation aligns
the source before issuing word-sized reads and stores the destination with
put_unaligned(), so it is also safe for the coherent DMA allocation used on
the non-reserved-memory path. ath11k and ath12k use the same pattern
when copying target memory into crash dumps, so call it unconditionally
here too.
The MEMREMAP_WT pointer is a plain void *, so an explicit __iomem cast is
needed; use __force to keep sparse happy.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.3.7.c5-00107-QCAHLSWMTPL-1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: reject out-of-range link ids in mt76_vif_link()
mt76_vif_link() indexes mvif->link[] without validating link_id, but
callers pass mvif->deflink_id / msta->deflink_id, which hold
IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added.
Since IEEE80211_MLD_MAX_NUM_LINKS is 15, that reads one element past the
end of the array, aliasing mt76_vif_data.offchannel_link.
Reachable via mt7996_set_tsf()/mt7996_offset_tsf() and
mt7996_net_fill_forward_path(). Bounds check link_id and return NULL,
matching mt7996_sta_link() and mt7996_sta_link_protected(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data()
In that function, we round down the start position and round up the
ending position.
But during the calculation of @len, we use "round_up(start + len,
sectorsize)", which is the rounded up end position, not the rounded up
length.
Which results a much larger length, and later we are still using
"start + len", which is completely incorrect.
Fix it by declaring a local @aligned_start and @aligned_len and use them
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, x86: Fix trampoline stack size for 128-bit arguments
btf_distill_func_proto() accepts a function argument up to 16 bytes, so a
128-bit scalar such as __int128 reaches the x86 trampoline with
arg_size == 16. But the current implementation assumes an __int128
argument only needs one register, so the register save area is
under-allocated and save_args() overwrites adjacent stack slots.
Compute the register count from arg_size for all arguments to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Resize MST HDCP per-connector arrays to 32
AMDGPU_DM_MAX_DISPLAY_INDEX is 31. It suggest a maximum number of
32 connectors. But the way it's used is like MAX_DISPLAY_COUNT.
Hence we're off by one with DRM core, which supports a max of 32
connectors.
Rename AMDGPU_DM_MAX_DISPLAY_INDEX to AMDGPU_DM_MAX_DISPLAY_COUNT
to match its actual use, and increase the size to 32 to match the
originally intended size. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix heap out-of-bounds read in nvmet_auth_negotiate()
nvmet_execute_auth_send() allocates the DH-HMAC-CHAP message buffer with
the host-supplied transfer length (tl) and hands it to
nvmet_auth_negotiate() without passing tl along. nvmet_auth_negotiate()
then reads the negotiate header and, for each of the halen hash
identifiers and dhlen DH group identifiers, indexes into the fixed
idlist[60] array (hashes at idlist[0..halen), groups at idlist[30..]).
Neither the transfer length nor halen/dhlen is validated. A malicious or
non-conformant host can report a tl smaller than the negotiate structure,
or a halen/dhlen larger than the array (both are u8, up to 255), making
the loops read past the end of the allocated buffer (heap out-of-bounds
read). The sibling nvmet_auth_reply() already validates tl against the
structure size; the negotiate path did not.
Pass tl into nvmet_auth_negotiate(), reject a tl that does not cover the
negotiate data plus one full protocol descriptor, and reject halen/dhlen
larger than NVME_AUTH_DHCHAP_MAX_DH_IDS. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix integer overflow in verify_tags() bounds check
verify_tags() validates the tagset table unpacked from a policy blob.
For each set it reads a count and checks that advancing the index by
that count stays inside sets.table[]:
u32 cnt = tags->sets.table[i];
if (i+cnt >= tags->sets.size) {
i, cnt and sets.size are all u32, so i+cnt is evaluated modulo 2^32.
sets.table[] is filled by unpack_tagsets() with aa_unpack_u32(), so
every entry is a raw unbounded 32-bit word taken from the policy blob,
and verify_tags() is the function that is supposed to validate it. A
count close to U32_MAX makes the sum wrap to a small value, the guard
passes, and the inner loop then walks sets.table[++i] past the end of
the kcalloc(size, sizeof(u32)) allocation.
Note that sets.size is bounded by 65535, because unpack_tagsets() reads
it with aa_unpack_array() as a u16, so the wrap cannot be reached by
growing the table; it is reached purely through the attacker-supplied
count.
With sets.size = 2 and sets.table = { 0, 0xffffffff }:
i = 0: cnt = 0, guard 0 + 0 >= 2 is false, inner loop does not run
i = 1: cnt = 0xffffffff, guard (1 + 0xffffffff) mod 2^32 == 0 >= 2 is
false, so the guard is bypassed and the inner loop reads
sets.table[2] -- one element past a two element allocation
The walk continues until an out-of-bounds value happens to be >=
hdrs.size or the access faults, so a crafted policy yields an
out-of-bounds read on the policy load path
(aa_replace_profiles -> aa_unpack -> unpack_policydb -> unpack_tags ->
verify_tags). unpack_tags() runs before the perms and DFA tables are
unpacked, so no other table needs to be well formed to reach it.
Policy load is gated by aa_may_manage_policy(), which checks
CAP_MAC_ADMIN relative to the subject's own user namespace rather than
the init user namespace, so with the default
unprivileged_userns_apparmor_policy=1 the path is reachable from an
unprivileged task in a matched-level nested namespace, not only by a
globally privileged one.
Perform the addition in u64 so that it cannot wrap, restoring the
intended i + cnt < sets.size guarantee. |
