| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in CRTC reset function
amdgpu_dm_crtc_reset_state() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next] |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: core - fix rng list on registration error
hwrng_register(rng) does the following:
1. Checks if rng has name and read methods set
2. Checks if the name already exists
3. Adds rng to global rng_list
4. May try to set rng to current_rng
If step 4 fails, it returns an error. However, it does not remove the
rng from rng_list, causing a dangling reference which can result in
use-after-free if the caller frees rng, since registration failed.
Add a list_del_init() cleanup step. |
| In the Linux kernel, the following vulnerability has been resolved:
esp: do not unref managed frag pages in esp_ssg_unref()
esp_ssg_unref() releases the page references held on the source
scatterlist after the AEAD operation completes. It calls
skb_page_unref() on every frag page for an out-of-place transform
(req->src != req->dst), and in the error path of esp_output_tail()
(already_unref == true) on the request's own scatterlist.
This is wrong when the skb carries managed frags
(SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf
and the skb does not hold a per-frag page reference; io_uring SEND_ZC
with a registered buffer attaches the bvec pages this way via
io_sg_from_iter(). The rest of the stack honours this invariant:
skb_release_data() skips the per-frag unref when SKBFL_MANAGED_FRAG_REFS
is set, and skb_zcopy_managed() is the guard used at the other unref
sites.
esp_ssg_unref() is missing that guard, so for a managed-frag skb it
drops a page reference the skb never acquired. This can underflow the
page reference count and free a page that is still in use.
Guard the function with skb_zcopy_managed() so both unref paths are
skipped for managed-frag skbs, matching skb_release_data(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rvt: Return NULL after port allocation failure
rvt_alloc_device() deallocates the IB device when its port array cannot
be allocated but then returns the pointer to the released allocation.
Callers treat any non-NULL value as valid and dereference it, resulting
in a use-after-free.
Return NULL immediately after deallocation so callers can propagate the
allocation failure. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()
A struct rdtgroup is reference counted via rdtgroup::waitcount. Callers that
need the structure to remain valid across a sleep (while waiting on acquiring
rdtgroup_mutex) take a reference with rdtgroup_kn_get() and release it with
rdtgroup_kn_put().
The release path is intended to serve as the fallback freer: if the count
drops to zero and the group has already been marked RDT_DELETED,
rdtgroup_kn_put() frees the structure.
The bulk teardown paths free_all_child_rdtgrp() and rmdir_all_sub() resulting
from a resctrl directory remove or resctrl fs unmount act as the primary
freer: they hold rdtgroup_mutex and free each rdtgroup whose waitcount is
zero, otherwise they set RDT_DELETED and leave the freeing to the last waiter.
These two freers race. rdtgroup_kn_put() commits waitcount == 0 with
atomic_dec_and_test() outside rdtgroup_mutex, then reads rdtgroup::flags.
Between those two operations a concurrent caller of free_all_child_rdtgrp()
or rmdir_all_sub() (which holds the mutex) can observe waitcount == 0 via
atomic_read(), call rdtgroup_remove(), and kfree() the structure.
The subsequent read of rdtgroup::flags in rdtgroup_kn_put() is then
a use-after-free, and the structure may even be freed twice if the freed
memory happens to satisfy the RDT_DELETED flag check.
Replace the bare atomic_dec_and_test() with atomic_dec_and_mutex_lock() so
that the decrement-to-zero takes rdtgroup_mutex before the count becomes
globally visible. The inspection of rdtgroup::flags then runs under the same
mutex held by the bulk freers, making the two paths mutually exclusive.
The common case where the count does not reach zero remains lock-free. Defer
kernfs_unbreak_active_protection() until after the mutex is dropped since
kernfs active protections functionally wrap rdtgroup_mutex. Remove resource
group, which in turn drops its kernfs reference, after kernfs protection is
restored.
[ bp: Split the commit messsages into smaller, easier-parseable paragraphs. ] |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Unregister device notifier before IDR teardown
The requested-devices notifier looks up protocol fwnodes from the
active_protocols IDR. During remove, unregister the notifier before
releasing and destroying active_protocols so no notifier callback can race
with the IDR teardown.
Keep the bus notifier registered until after the protocol state is torn
down, matching the existing remove ordering for SCMI bus users. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Drop handle on protocol bind failures
The SCMI bus notifier acquires an SCMI handle when the driver core emits
BUS_NOTIFY_BIND_DRIVER, before invoking the protocol driver probe
callback. The protocol probe path only checks whether sdev->handle is
set.
If device_link_add() fails after the handle has been acquired, the
protocol device can still bind with a valid handle but without the
dependency link to the SCMI parent. A concurrent parent unbind can then
miss the child and tear down the SCMI instance while the child still
holds a handle into it.
If the protocol driver probe later fails, for example with
-EPROBE_DEFER, the driver core emits BUS_NOTIFY_DRIVER_NOT_BOUND rather
than BUS_NOTIFY_UNBOUND_DRIVER. The SCMI notifier only released the
handle on BUS_NOTIFY_UNBOUND_DRIVER, so each failed protocol-device bind
leaked the SCMI instance users refcount and left sdev->handle set after
the failed probe.
Make the link helper report failure and drop the acquired handle if the
link cannot be created. Also handle BUS_NOTIFY_DRIVER_NOT_BOUND in the
same cleanup path used for unbind so failed probes balance the earlier
BUS_NOTIFY_BIND_DRIVER acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix SCMI device destroy lifetimes
scmi_child_dev_find() drops the reference returned by
device_find_child() before returning the scmi_device pointer. A
concurrent unregister can then release the device while the destroy path
is still using the returned pointer.
Make the lookup helper return the device_find_child() reference and keep
it until scmi_device_destroy() has finished unregistering the child.
Also split device_unregister() in __scmi_device_destroy() so the SCMI bus
ID is not made reusable until after device_del() has removed the old
scmi_dev.N name from sysfs. This avoids a new SCMI device reusing the
same ID while the old device is still registered.
The final device release callback is also a possible cleanup path when
SCMI children are deleted by driver core recursion rather than
__scmi_device_destroy(). Release the SCMI bus ID from a common helper
used by destroy, register-failure and final-release paths, and clear
scmi_dev->id after freeing it so the final release cannot free the same
ID again. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Only fini scheduler after successful init
msm_ringbuffer_new() destroys a partially initialized ring through
msm_ringbuffer_destroy() when an allocation or scheduler setup step
fails.
If drm_sched_init() fails before it finishes initializing the scheduler,
the failure path still calls drm_sched_fini(). That teardown path assumes
the scheduler work items, lists, and workqueue state were initialized.
Track successful scheduler initialization and call drm_sched_fini() only
after drm_sched_init() returned 0.
This issue was found by a static analysis checker and confirmed by
manual source review.
Patchwork: https://patchwork.freedesktop.org/patch/738905/ |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Terminate all descriptors without callbacks
The DMA Engine client documentation says in the "Terminate APIs" section
of Documentation/driver-api/dmaengine/client.rst:
"No callback functions will be called for any incomplete transfers."
dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches
the interrupt handler. This schedules a callback for the active descriptor
and leaves other issued or submitted descriptors queued. A late callback
after dmaengine_terminate_sync() can dereference client state that has
already been freed, while leftover descriptors may later restart into
reused buffers or leak.
Move all issued and submitted descriptors to the terminated list whenever
termination completes. For a pending STOP, do this from both the DONE and
ABORT paths. Complete their cookies in order without scheduling callbacks.
A STOP can remain pending until the running transfer raises an
interrupt. Make device_synchronize() wait for such a pending STOP to
complete before releasing terminated descriptors. Reuse it from
free_chan_resources(), then release the remaining virt-dma resources.
Sleep instead of busy-polling while waiting, and warn if the existing
timeout expires. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Unrequest devices if driver registration fails
scmi_driver_register() requests protocol devices before registering the
driver. If driver_register() fails, those requests remain in the global
IDR and retain pointers to the module's ID table. Once the failed module
load releases that storage, later request matching or SCMI device creation
can dereference the stale pointers.
Unrequest the complete protocol table before returning the registration
failure. At this point table registration succeeded, so every entry is
owned by the current registration attempt. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip
The gpio_chip is allocated with device-managed memory but registered with
the non-managed gpiochip_add_data(). This was harmless while the drivers
were built-in, but once they can be built as modules and unbound/rmmod'd,
devm frees the gpio_chip's memory while it is still registered, causing a
use-after-free.
Register it with devm_gpiochip_add_data() so it shares the same
device-managed lifecycle, which also lets the manual gpiochip_remove()
error paths go away. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: oc-tiny: switch to managed controller allocation
The controller is allocated with the non-managed spi_alloc_host() while
the interrupt is registered with devm_request_irq(). During removal,
spi_bitbang_stop() only unregisters the controller; the subsequent
spi_controller_put() then frees the controller together with its
embedded driver-private devdata, which is the IRQ handler's dev_id. The
devm_request_irq() release action (free_irq()), which drains the
handler, does not run until after .remove() returns. A late or latched
interrupt can therefore reach tiny_spi_irq() and dereference
already-freed memory (e.g. hw->base).
Switch to devm_spi_alloc_host() so that the devres LIFO order releases
the controller only after free_irq() has drained the handler, and drop
the now-redundant spi_controller_put() from .remove(). The probe error
path is simplified to direct returns.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix UAF when probe runs concurrent to dyn ID removal
Dynamic IDs are only guaranteed to be valid when dynids.lock is held,
as remove_id_store() can free the node. Thus, make a copy in
pci_match_device(). Also, clarify that the id parameter is only valid
during probe. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Fix dereg_skb leak and double free in write_tpt_entry()
When the device is in the fatal error state, write_tpt_entry() returns -EIO
before handing the caller's preallocated skb to the transmit path; its
allocation-failure returns do the same. c4iw_dereg_mr() ignores the error
and frees mhp, leaking mhp->dereg_skb. c4iw_get_dma_mr() instead frees the
skb a second time after dereg_mem() already consumed it, a double free.
Make write_tpt_entry() the sole owner of a non-NULL skb, freeing it on
every return preceding handoff to c4iw_ofld_send(): fatal error, tpt and
stag allocation failure. c4iw_ofld_send() consumes the skb on success and
error alike, so drop the redundant kfree_skb() in c4iw_get_dma_mr() after
dereg_mem(). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: davinci: switch to managed controller allocation
The controller is allocated with the non-managed spi_alloc_host() while
the interrupt is registered with devm_request_threaded_irq(). During
removal, spi_bitbang_stop() only unregisters the controller; the
subsequent spi_controller_put() then frees the controller together with
its embedded davinci_spi devdata, which is the IRQ handler's dev_id.
The devm_request_threaded_irq() release action (free_irq()), which
drains the handler, does not run until after .remove() returns. A late
or latched interrupt can therefore reach davinci_spi_irq() and
dereference already-freed memory.
Switch to devm_spi_alloc_host() so that the devres LIFO order releases
the controller only after free_irq() has drained the handler, and drop
the now-redundant spi_controller_put() from .remove(). The probe error
path is simplified to direct returns.
The clock is acquired with devm_clk_get_enabled(), which is registered
after the IRQ and thus released before it by the devres LIFO order.
Drain the interrupt explicitly with devm_free_irq() before disabling the
controller so that a late interrupt cannot access the registers of a
clock-gated controller.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix potential UAF when reading bpf link info
In bpf_link_show_fdinfo and bpf_link_get_info_by_fd, link->prog is
accessed without holding any locks. If the prog is concurrently replaced
via bpf_link_update, the old prog can be freed, leading to a potential
UAF issue.
Fix this by accessing link->prog under RCU protection to safely fetch
the pointer and guarantee its lifetime while reading its fields. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unwind state on add_interface failure
When mt76_wcid_alloc() fails, mt7915_add_interface() returned without
clearing the vif_mask/omac_mask bits it had already set, without removing
the firmware dev info added earlier, and without clearing a monitor_vif
pointer to the vif mac80211 is about to free. mac80211 does not call
remove_interface() for a failed add, so the indices and firmware dev
entry leaked permanently and testmode could dereference the stale
monitor_vif. Add a proper error unwind. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: cancel reset and rc work on device unregister
Both drivers cancelled dump_work on unregister but left reset_work and
rc_work to be flushed only by destroy_workqueue() in mt76_free_device(),
which runs after the hw is unregistered and the hardware stopped. A
reset_work that fires in that window calls ieee80211_restart_hw() and
re-arms mac_work on an unregistered hw, and rc_work touches station state
being torn down. Cancel both up front, alongside dump_work. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: stop PMSR before P2P and NAN teardown
PMSR request teardown must abort active measurements while the
wireless_dev is still present in the driver. cfg80211_leave_locked() and
cfg80211_stop_pd() already do this before invoking the driver's stop
callback, but cfg80211_stop_p2p_device() and cfg80211_stop_nan() do not.
Those helpers are also called directly by nl80211, rfkill shutdown, and
wireless_dev unregister paths. If one of these paths stops a P2P device
or NAN interface with a pending request, it removes the mac80211
subinterface from the driver first. Subsequent request cleanup cannot
reach the lower driver's abort callback, but cfg80211 frees the request
regardless. Driver state can then retain a stale request and use it when
it later reports a result.
Call cfg80211_pmsr_wdev_down() before stopping the P2P device or NAN
interface. This keeps lower-driver request state and cfg80211 request
ownership in sync for all of the helpers' callers. |
