Export limit exceeded: 398481 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398481 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97555 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in DACL owner/group rewrite When id_mode_to_cifs_acl rewrites an existing DACL, it allocates a buffer sized according to the on-disk DACL length reported by dacl_ptr->size. However, replace_sids_and_copy_aces may rewrite each ACE with a new owner/group SID obtained from the cifs.idmap upcall. Those SIDs can have up to SID_MAX_SUB_AUTHORITIES (15) sub-authorities, making each ACE up to 76 bytes (sizeof(struct smb_ace)). If the original DACL contains short SIDs (e.g., 1 sub-authority) while the replacement SIDs are long, the rewritten ACEs overflow the allocation. Fix this by always budgeting for worst-case SID expansion: allocate sizeof(struct smb_acl) plus num_aces * sizeof(struct smb_ace), which covers the smb_acl header and room for every ACE at maximum SID size. This replaces the previous split logic that used dacl_ptr->size for cifsacl mounts but num_aces * sizeof(struct smb_ace) for mode_from_sid mounts: both paths can trigger the same rewrite and need the same headroom. KASAN reports this as: BUG: KASAN: slab-out-of-bounds in build_sec_desc+0x1e8a/0x2680 [cifs] Write of size 4 at addr ffff8881a5e25374 by task chown/5298 ... The buggy address is located 0 bytes to the right of allocated 884-byte region [ffff8881a5e25000, ffff8881a5e25374) | ||||
| CVE-2026-97527 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock The fcport->unsol_ctx_head list is modified from several contexts without a common lock. Entries are added in qla2xxx_process_purls_iocb() from the response queue ISR (under the qpair qp_lock), while they are removed from qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp() (NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB completion). The qpair qp_lock cannot serialize this per-fcport list since multiqueue adapters add entries through different qpairs, so a concurrent add and delete (or two concurrent deletes) can corrupt the list pointers. Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del() on unsol_ctx_head. The add nests under the existing qp_lock; no delete path takes qp_lock, so the lock order is consistent and deadlock free. | ||||
| CVE-2026-18710 | 1 Mongodb | 2 Java Driver, Mongodb Server | 2026-09-25 | 6.5 Medium |
| A MongoDB driver component could write sensitive configuration information, including a credential used for outbound network connectivity, to application log output in cleartext during routine client initialization. This occurs automatically as part of normal operation and requires no special privileges to trigger. A party able to read the affected application's logs or downstream log-aggregation storage could recover the credential and reuse it to authenticate to the associated network infrastructure. This issue affects confidentiality only. | ||||
| CVE-2026-70009 | 1 Microsoft | 1 Azure Arc | 2026-09-25 | 9.3 Critical |
| Improper limitation of a pathname to a restricted directory ('path traversal') in Azure Arc allows an unauthorized attacker to elevate privileges over a network. | ||||
| CVE-2026-60101 | 2026-09-25 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-60100 | 2026-09-25 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-60099 | 2026-09-25 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-60098 | 2026-09-25 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-60097 | 2026-09-25 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-60096 | 2026-09-25 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-85889 | 1 Microsoft | 1 Azure Ai Foundry | 2026-09-25 | 10 Critical |
| Missing authentication for critical function in Azure AI Foundry allows an unauthorized attacker to elevate privileges over a network. | ||||
| CVE-2026-97904 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: initialize policy rwsem before sysfs publication cpufreq_policy_alloc() initializes policy->rwsem after kobject_init_and_add() has created the policy sysfs directory and its default attributes. A sysfs access can therefore reach a policy callback before the semaphore has been initialized. Initialize policy->rwsem before publishing the policy kobject so sysfs callbacks always see an initialized semaphore. | ||||
| CVE-2026-97905 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: zero-initialize policy cpumask before sysfs publication cpufreq_policy_alloc() allocates policy->cpus with alloc_cpumask_var(), i.e. without __GFP_ZERO, unlike the sibling related_cpus and real_cpus masks. With CONFIG_CPUMASK_OFFSTACK=y the mask is a separate kmalloc_node() allocation, so its bitmap holds whatever the slab allocator left behind: cpufreq_online() cpufreq_policy_alloc() alloc_cpumask_var(&policy->cpus) /* bitmap is uninitialized */ kobject_init_and_add() /* policy%u/ appears in sysfs */ cpufreq_policy_online() cpumask_copy(policy->cpus, cpumask_of(cpu)) /* first valid value */ This leaves a window in which the sysfs attributes are already reachable while policy->cpus is still garbage. show()/store() gate on policy_is_inactive(), i.e. cpumask_empty(policy->cpus), so a non-zero bitmap makes them run the attribute callbacks on a policy that is not initialized yet. Fix this by using zalloc_cpumask_var() for policy->cpus. | ||||
| CVE-2026-97907 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: Don't leak return code when parsing firmware format v2 When key_id from chip is zero, rtlbt_parse_firmware_v2() intentionally ignores all security headers. However, the implementation simply breaks from a switch statement and leaks uninitialized return code `rc' (if the first section is a security one) or the previous section's `rc'. Fix it by really skipping a loop with `continue'. For consistency and readability, also do the same for the default case. | ||||
| CVE-2026-97909 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sti: initialize IRQ lock before requesting IRQ uni_reader_init() registers the shared IRQ before initializing reader->irq_lock. A pending interrupt can invoke the handler while the lock is still uninitialized. Initialize the lock before registering the IRQ so the interrupt path always sees valid lock state. | ||||
| CVE-2026-97914 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Fix ethosu_job_open() return value A WARN_ON() returns a 0 or 1, not the original negative errno. Just drop the WARN_ON() as the FD open will pass the return code to userspace and there's only one possible source of the error (drm_sched_entity_init()). | ||||
| CVE-2026-97923 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram the var ref when its initialization fails create_var_ref() allocates a VAR_REF hist_field and then calls init_var_ref() to fill it in. When that fails the field is leaked. commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy var_refs") made destroy_hist_field() return early for HIST_FIELD_FL_VAR_REF, since var refs are freed by walking the trigger's var_refs[] array instead. create_var_ref() adds the field to that array only after init_var_ref() has succeeded, so on this path the field is in neither place and nothing frees it. The call was correct when it was written, before var refs were taken out of destroy_hist_field(). init_var_ref() cannot free it either. The caller owns the field, so init_var_ref() undoes only its own string allocations and leaves the field alone. Freeing it there would leave create_var_ref() passing freed memory to destroy_hist_field(), which reads its flags. Call __destroy_hist_field(), which frees the field without consulting the flag. | ||||
| CVE-2026-97924 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Don't destroy fields when event removal fails destroy_user_event() destroys the event's fields before attempting to remove the trace event call. If user_event_set_call_visible() fails, e.g. because the event is still enabled and trace_remove_event_call() returns -EBUSY, the event is left registered with an irreversibly destroyed field list. Any subsequent interaction with the event then operates on an empty field list while it is still fully visible in tracefs. Move the field destruction after the call removal, and splice the field list back onto the event when the removal fails so the event remains in a consistent state. | ||||
| CVE-2026-97983 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vduse: return compat ioctl results directly The compat handler handles VDUSE_IOTLB_GET_FD and VDUSE_VQ_GET_INFO, but then calls the native handler. Their different command sizes make native dispatch return -ENOIOCTLCMD. For GET_FD, this overwrites receive_fd()'s return value after the descriptor is installed, leaking one fd per call. Return handled compat results directly and use native dispatch only for other commands. | ||||
| CVE-2026-97984 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP6_MAX_MTU for UDP sockets to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IPV6_MTU_DISCOVER is set to IPV6_PMTUDISC_DO or IPV6_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce (included in the new selftest): 1. Set device MTU bigger than IP6_MAX_MTU. cork->base.fragsize will be set to that MTU in ip6_setup_cork. 2. Set IPV6_MTU_DISCOVER to IPV6_PMTUDISC_PROBE or IPV6_PMTUDISC_DO. It lets maxnonfragsize be set to device MTU (cork->fragsize) in __ip6_append_data, rather than to IP6_MAX_MTU. 3. Send 65528 bytes of payload (+8 bytes of UDP header, +40 bytes of IPv6 header). Device MTU allows it (it's only one byte bigger than IP6_MAX_MTU, and the device MTU is bigger than that). 4. The UDP length in the built packet is 65536, which overflows the 16-bit length field and triggers the WARN in udp_set_len_short. To avoid breaking sending UDP jumbograms over raw IPv6 sockets, limit the change to UDP sockets only. The original overflow bug with IPv6 and IPV6_PMTUDISC_DO seems to predate git history (verified reproduction on 2.6.21), was fixed later, and then reappeared in commit 427faee167bc ("net: ipv6: introduce ip6_dst_mtu_maybe_forward"), which is chosen as the Fixes tag here. The overflow with IPV6_PMTUDISC_PROBE reproduces since its introduction in commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE"). | ||||