| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Properly handle NULL pointer in dat_cond_set_storage_key()
Some callers pass NULL as oldkey. Calling page_cond_set_storage_key()
will cause that NULL pointer to get dereferenced.
Fix by checking for NULL and assigning the pointer to a dummy local
variable to avoid crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Add missing srcu in kvm_s390_set_irq_state()
Like kvm_s390_inject_vcpu(), kvm_s390_set_irq_state() also needs the
kvm->srcu or the slots lock when performing the Store status operation.
Fix by taking kvm->srcu in kvm_s390_set_irq_state(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: trigger: cancel reenable_work before freeing trigger
iio_trigger_notify_done_atomic() defers ->reenable() into
trig->reenable_work on the system workqueue, and the worker dereferences
the owning trigger through container_of(). Nothing cancels this work
before iio_trig_release() frees the trigger, so a worker armed by the
last in-flight IRQ can outlive the free and touch freed memory.
Cancel it at the top of iio_trig_release(), which every free path
reaches through the device core's final put_device().
Found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Don't apply va_align to hugetlb mappings on AMD F15h
get_align_mask() returns huge_page_mask_align() for hugetlbfs, but get_align_bits()
adds va_align.bits regardless, so vm_unmapped_area() returns an address off the huge
page boundary and __unmap_hugepage_range() hits BUG_ON(start & ~huge_page_mask(h)) at
teardown.
This can be triggered on Carrizo and FX-8370E, both hstates.
Pass the file to get_align_bits() and skip the randomisation for hugetlbfs.
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: reject oversized TX packets in send_frame()
btintel_pcie_send_frame() eventually copies skb->data into a fixed
BTINTEL_PCIE_BUFFER_SIZE (4096) DMA buffer via memcpy() in
btintel_pcie_prepare_tx(), with a 4-byte PCIe type header prepended.
A user-space process with HCI_CHANNEL_USER access can inject an
oversized packet and overflow the buffer.
Reject packets larger than
BTINTEL_PCIE_BUFFER_SIZE - BTINTEL_PCIE_HCI_TYPE_LEN on entry. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: fix buffer over-read in btintel_hw_error()
The "Exception info %s" print uses skb->data + 1, but the 12-byte
payload is not guaranteed to be NUL-terminated and can be read past
its end.
Bound the print with "%.*s" and skb->len - 1. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Serialize fragmented ISO packet queueing
The fragmented path in hci_queue_iso() calls __skb_queue_tail() without
holding conn->data_q.lock. The socket lock serializes senders, but the
transmit worker can concurrently remove packets from this queue using
skb_dequeue().
After an insertion saves the old tail pointer, hci_sched_iso() can dequeue
that packet and pass it to the driver. The driver can free the packet
before the insertion resumes and writes to the old tail's next pointer,
causing a use-after-free. Concurrent updates can also corrupt the queue.
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_send_iso+0xc7d/0xe10
Call Trace:
hci_send_iso+0xc7d/0xe10
iso_sock_sendmsg+0x710/0x900
__sys_sendto+0x34a/0x3a0
Allocated by task 86:
__alloc_skb+0xdd/0x820
alloc_skb_with_frags+0x7e/0x770
sock_alloc_send_pskb+0x67a/0x820
bt_skb_sendmsg.constprop.0+0xc0/0x6c0
iso_sock_sendmsg+0x44e/0x900
Freed by task 90:
kmem_cache_free+0xcb/0x3d0
vhci_read+0x33f/0x4d0
vfs_read+0x177/0xa20
Hold the queue lock across the entire fragment batch, as hci_queue_acl()
does, to serialize insertion against dequeue while preserving fragment
ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Lock parent access during enhanced SCO setup
Bluetooth: hci_conn: Lock parent access during enhanced SCO setup
hci_enhanced_setup_sync() runs on the request workqueue without the
hci_dev_lock held by its caller when setup was queued. Its CVSD
capability check and find_next_esco_param() dereference conn->parent
while the receive workqueue can unlink and release that parent.
The following interleaving can cause a use-after-free:
hci_enhanced_setup_sync() hci_disconn_complete_evt()
load conn->parent
hci_dev_lock()
hci_conn_del(ACL parent)
unlink SCO child
drop link's parent reference
clear child->parent
release ACL parent
bt_link_release()
kfree(parent)
hci_dev_unlock()
read parent->features[0][3]
The reference held for the queued SCO child does not keep its ACL parent
alive after unlinking. Commit 42de40abe25d ("Bluetooth: hci_conn: fix the
SCO setup context lifetime") protects the child stored in the queued
context, but leaves these parent accesses unprotected.
With a 40 ms diagnostic delay after loading conn->parent, an instrumented
kernel based on fd179f8a05be, which already contains 42de40abe25d,
BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0xda5/0xdf0
Read of size 1 at addr ffff888102204047 by task kworker/u17:0/93
Call Trace:
hci_enhanced_setup_sync+0xda5/0xdf0
hci_cmd_sync_work+0x13c/0x290
process_one_work+0x6b4/0x10e0
Allocated by task 92:
__hci_conn_add+0x304/0x1df0
hci_connect_acl+0x349/0x3e0
hci_connect_sco+0x3b/0x9a0
sco_sock_connect+0x475/0xca0
Freed by task 94:
kfree+0x121/0x3c0
bt_link_release+0x79/0xa0
device_release+0xc8/0x240
kobject_put+0x14d/0x280
hci_conn_del+0x524/0xe30
hci_disconn_complete_evt+0x403/0x8c0
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
The accessed address is 71 bytes into the freed ACL parent, at its
features[0][3] byte; the queued SCO child is a different object. The
diagnostic preserves the loaded parent across the delay, matching the
unmodified compiled capability check, and does not change the parent
references or teardown path.
Hold hci_dev_lock() across the codec switch, including every call to
find_next_esco_param(), and release it on all selection errors. Keep
configure_datapath_sync() outside the critical section because it waits
for HCI events. Preserve parameter selection and existing return values. |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
| Seven Gitea API routes under `/api/v1/users/{username}` (followers, following, following/{target}, starred, subscriptions, keys and gpg_keys) were registered without the `individualPermsChecker` middleware that enforces the visibility of the target user. An authenticated user could therefore read the followers, following list, starred and watched repositories and public SSH and GPG keys of a user with limited or private visibility, whom they could not otherwise see. The issue was fixed in 1.27.3 and 28.0.0 and disclosed with 28.2.0. |
| Deleting a label compared the ID of the repository in the request against the organization ID of organization labels, and the two ID sequences overlap. A user with write access to the issues of a repository could therefore delete the labels of an organization that has the same numeric ID as that repository. Labels are now deleted only within their own repository or organization. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: proximity: aw96103: validate firmware data length
The firmware parser reads a length from the binary header and then uses
it to walk six-byte register/value entries. A truncated firmware image
can make the parser read beyond the copied firmware buffer. A value
smaller than the four-byte count field also underflows, producing a very
large length.
Read the little-endian field with get_unaligned_le32(), as previously
proposed by David Lechner. Validate the header size, reject an
underflowed length, ensure the resulting payload is contained in the
firmware image, and require it to contain whole register/value entries. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: rohm-bm1390: Return error when read fails
The data reading function ignores the cached error value, and
unconditionally returns 0. Return cached 'ret' -value after stopping
the measurement so user knows if read failed and data is garbage. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: bmp280: fix out-of-bounds access in sampling frequency lookup
The sampling frequency tables store each frequency as an integer part and
a fractional part in micro units. num_sampling_freq_avail is initialized
to the number of flattened integer elements because read_avail() returns
the table as a flat array.
bmp280_write_sampling_frequency(), however, indexes the same table as a
two-dimensional array and uses num_sampling_freq_avail as the number of
rows. Convert the flattened element count back to the number of rows
before iterating over the table. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16480: fix unprotected debugfs reads
The firmware_revision and firmware_date file operations are open coded
and never call debugfs_file_get(), which debugfs_create_file_unsafe()
requires. debugfs_remove_recursive() therefore does not wait for a read
in progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: adis16136: fix unprotected debugfs reads
The serial_number file operations are open coded and never call
debugfs_file_get(), which debugfs_create_file_unsafe() requires.
debugfs_remove_recursive() therefore does not wait for a read in
progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: frequency: adf4377: Fully initialize clk_init_data and clk_parent_data
The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need. However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.
adf4377_clk_register() fills in init.parent_data, and assumes that
init.parent_names is NULL. However, the latter is uninitialized, and
thus may cause a crash.
Similarly, adf4377_clk_register() fills in only parent_data.fw_name,
leaving other members of the clk_parent_data structure uninitialized.
Make sure all members are fully initialized, to fix such bugs, and to
avoid future breakage when converting drivers to a different method for
specifying the parents. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: xilinx-xadc: free IRQ before cancelling the unmask worker on unbind
The ZYNQ XADC alarm IRQ handler queues zynq_unmask_work via
schedule_delayed_work(); that work is cleared by a devm callback.
Register the devm callback before devm_request_irq() so the devres LIFO
teardown frees the IRQ first, ensuring the handler can no longer queue
work by the time the workqueue is cleared. Otherwise the handler could
re-arm the work and run it after the xadc structure has been freed.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: adi-axi-adc: Initialize state mutex
The AXI ADC register access paths serialize transactions with st->lock,
but probe does not initialize it. Initialize the mutex before registering
the backend. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix use-after-free on unbind
ad_sd_buffer_postenable() allocates sigma_delta->samples_buf with
devm_krealloc() at runtime, so its devres entry sits after all
probe-time entries of the driver. devm resources are released in
reverse allocation order, which means unbind frees samples_buf before
iio_device_unregister() disables the buffers and detaches the trigger
pollfunc. The data ready IRQ is still enabled at that point, so
ad_sd_trigger_handler() can still run and memcpy() incoming samples
into the freed samples_buf.
Fix this by preallocating the buffer in
devm_ad_sd_setup_buffer_and_trigger(), before the triggered buffer and
the IRQ are set up, so it is freed only after iio_device_unregister()
has drained the trigger handler via free_irq(). Size it for the worst
case of all sequencer slots being active; ad_sd_validate_scan_mask()
already caps the number of active channels at num_slots.
This issue was found by an in-house static analysis tool. |
