| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Unregister field variable histograms when the command fails
An action that names a field on another event needs that field as a
variable, so create_field_var_hist() registers a second hist trigger on
that event to provide it, and records it in
target_hist_data->field_var_hists[].
If a later part of the same command fails, create_actions() returns an
error and event_hist_trigger_parse() jumps to out_free. The write fails
with -EINVAL and sched_switch gets no trigger, but:
# echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> \
events/sched/sched_waking/trigger
# echo 'my_synth u64 lat; int a; int b' >> synthetic_events
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\
onmatch(sched.sched_waking).my_synth($wakeup_lat,prio,nosuchfld)'\
>> events/sched/sched_switch/trigger
# cat events/sched/sched_waking/trigger
hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active]
hist:keys=pid:vals=hitcount:synthetic_prio=prio:sort=hitcount:size=2048 [active]
The second histogram is the one created for 'prio'. It is still active and
still counting.
out_free reaches destroy_field_var_hists(), which frees the
field_var_hists[] entries, but never unregister_field_var_hists(), which is
what removes the triggers and runs only from event_hist_trigger_free(). The
entry is freed and the trigger is left with nothing tracking it.
Unregister the field variable histograms in out_free as well, and record
each one as soon as its trigger is registered rather than after the lookup
that follows it, so no exit can leave a registered trigger untracked. The
entry then belongs to field_var_hists[] and is released by
destroy_field_var_hists(), so freeing it on that exit would be a double
free. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the read method check against type removal
keyctl_read_key() checks key->type->read without holding key->sem.
A reference keeps the key alive, but does not pin the module containing
its type. A surviving RxRPC key can therefore be read while AF_RXRPC
is being unloaded:
KEYCTL_READ task Module unload and key GC
---------------- ------------------------
lookup_user_key()
permission / possession checks
load key->type
af_rxrpc_exit()
unregister_key_type()
GC: down_write(key->sem)
GC: retype to key_type_dead
GC: up_write(key->sem)
unregister_key_type() returns
free_module()
read saved type's read member
The final access can read freed module storage. The read invocation in
__keyctl_read_key() is already protected by key->sem, but the earlier
method check is outside that critical section.
Move the method check into __keyctl_read_key(), after key_validate() and
under its existing read hold on key->sem. The check and invocation then
use the same protected type for length queries and every read retry.
The GC cannot retype the key until the semaphore is released, and type
unregistration waits for that GC pass before the module can be freed.
Return -EOPNOTSUPP when validation succeeds and the type has no read
method. A temporary buffer may now be allocated before this result;
allocation and copying to userspace remain outside the semaphore. |
| In the Linux kernel, the following vulnerability has been resolved:
asymmetric_keys: reject trust keys without IDs
The PKCS#8 parser deliberately leaves the asym_key_ids payload slot
empty. key_or_keyring_common() unconditionally dereferences that slot
when a PKCS#8 key is supplied to a key_or_keyring restriction. Both the
plain and :chain forms reach this branch, allowing an unprivileged caller
to trigger a NULL pointer dereference through KEYCTL_RESTRICT_KEYRING
followed by add_key().
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:key_or_keyring_common (crypto/asymmetric_keys/restrict.c:205 crypto/asymmetric_keys/restrict.c:279)
Call Trace:
<TASK>
__key_create_or_update (security/keys/key.c:884)
key_create_or_update (security/keys/key.c:1021)
__do_sys_add_key (security/keys/keyctl.c:134)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Kernel panic - not syncing: Fatal exception
Reject an asymmetric restriction key without key IDs. A PKCS#8 private
key cannot identify the signer of a candidate certificate and is not a
valid trust anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix resident conversion in ntfs_new_attr_flags
When setting sparse/compressed flags on a resident attribute, the
function skipped the resident-to-non-resident conversion and
terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: error damos_commit_quota_goal() for zero target_value
Patch series "mm/damon: move zero damos quota target_value handling to the
core layer".
Having zero DAMOS quota target value can cause division by zero. DAMON
API callers are checking the target value parameters to avoid that. It is
easy to make mistakes in some of the multiple API callers. Move that to
the core layer.
Patch 1 adds the corner case handling into the core layer DAMON parameters
validation logic. Patches 2 and 3 remove no more needed DAMON API callers
side handling of the corner case in DAMON_LRU_SORT and DMON_SAMPLIE_MTIER,
respectively.
This patch (of 3):
If a DAMOS scheme has a damos_quota_goal of zero target_value,
damos_quota_goal() could trigger division-by-zero error. Hence each DAMON
API callers should do the zero target_value validation. It is easy to
make mistakes. Actually such bugs in DAMON_LRU_SORT and
DAMON_SAMPLE_MTIER were found and fixed [1].
It is better to handle the corner case only once in the core layer,
instead of multiple places in all DAMON API callers. One straightforward
option is using an alternative denominator for the corner case in the
damos_quota_goal(). However, the zero target_value is meaningless. In
this case, the quota goal is always evaluated as achieved or
over-achieved. The quota will only keep being reduced.
Simply avoid using zero target_value by adding a check in the core layer
DAMOS quota goal parameters validation/commit path,
damos_commit_quota_goal(). Update it to return an error in the case.
Also update its caller to propagate the error. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: refuse __l2cap_chan_add if chan already has conn
l2cap_chan may be linked to l2cap_conn at most once. This is assumed in
several places, eg l2cap_chan_del cleanup.
There is a TOCTOU race where the invariant is violated:
[Task 1] [Task 2]
l2cap_chan_connect l2cap_sock_bind
l2cap_chan_lock lock_sock
l2cap_state_change if (sk->sk_state != BT_OPEN)
chan->state = BT_CONNECT
l2cap_sock_state_change_cb chan->state = BT_BOUND
sk->sk_state = BT_BOUND
lock_sock <------------------ release_sock
sk->sk_state = BT_CONNECT
l2cap_sock_connect() does not check sk->sk_state, so since chan->state
is now BT_BOUND, subsequent connect() ends up with second
__l2cap_chan_add.
Explicitly document and check the invariant in __l2cap_chan_add with
WARN_ON_ONCE. The only callsite where it could be hit is
l2cap_chan_connect, so add pre-check there to avoid relying on
chan->state. chan->state read/write is not properly guarded currently so
there can be other TOCTOUC problems.
Add l2cap_lock_chan in l2cap_sock_bind() to guard chan->state write. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Hold trace_types_lock when resetting last boot data from readers
update_last_data_if_empty() is called from tracing_open() with O_TRUNC,
tracing_read_pipe() and tracing_buffers_read() without trace_types_lock.
Two readers can both pass the LAST_BOOT test and free module_delta
twice, and a module notifier can update module_delta while it is being
freed.
Take trace_types_lock in those paths and keep the callers that already
hold it on an unlocked variant. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Save the event file instead of the compatible histogram
create_field_var_hist() creates a histogram on the matched event to
supply a field variable, and records it on the target so it can be torn
down later:
hist_data = find_compatible_hist(target_hist_data, file);
...
/* Save the compatible histogram information */
var_hist->hist_data = hist_data;
hist_data is not the histogram it creates. It is one that was already
there, whose keys the new one copies. The saved pointer has a single
user, unregister_field_var_hists(), which runs when the target is
removed:
file = hist_data->field_var_hists[i]->hist_data->event_file;
find_compatible_hist() matches on keys alone, so it can pick one with no
variables of its own. check_var_refs() then returns false and the user
can remove it while the target still points at it:
BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320
Read of size 8 at addr ffff8880093b90e0 by task init/1
Freed by task 1:
kfree+0x154/0x420
event_hist_trigger_free+0x1d5/0x320
event_hist_trigger_parse+0x35f3/0x69e0
trigger_process_regex+0x1a6/0x250
Save the event file instead. It is all the dereference ever wanted, and
it does not go away when the user removes a trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/histograms: Verify event_call identity when updating synth_event refcount
In event_hist_trigger_parse() and hist_unreg_all(), the histogram
registration and unregistration paths look up find_synth_event() using
trace_event_name(file->event_call) and adjust se->ref if a match is
found.
Because find_synth_event() only compares the event basename, registering
or removing a histogram on a non-synthetic trace event whose basename
matches a synthetic event erroneously modifies the synthetic event's
reference count. If a histogram is registered on the non-synthetic
event before the synthetic event is created and removed afterwards,
se->ref is decremented without a matching increment, allowing the
synthetic event to be freed while an active histogram action still holds
a pointer to it.
Introduce find_synth_event_call() to verify that &se->call matches
file->event_call before adjusting se->ref. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark syscall helpers as sleepable
bpf_sys_bpf() executes the bpf(2) syscall body, which can take mutexes,
allocate with GFP_KERNEL, and wait for an RCU grace period.
bpf_sys_close() reaches close_fd() and filp_close(), which can sleep as
well.
Both helpers are limited to BPF_PROG_TYPE_SYSCALL, whose main program is
sleepable. That does not make every callback sleepable: a syscall program
can register a bpf_timer callback, and the verifier checks that callback
in a non-sleepable context while retaining the syscall helper set.
Without .might_sleep on the prototypes, such a callback can invoke
bpf_sys_bpf() from hrtimer softirq context and trigger a
scheduling-while-atomic failure. bpf_sys_close() is exposed through the
same missing context check.
Set .might_sleep on both prototypes so the existing helper-context check
rejects them from timer callbacks and other atomic regions. Calls from the
sleepable main body remain valid. |
| In the Linux kernel, the following vulnerability has been resolved:
printk: Postpone kthread startup
There have been various bug reports related to SMP systems hanging
on boot. The reports vary but seem to have some overlap with regard
to missed IPI's during SMP setup. The reports also show that
reverting NBCON console usage allows the bugs to disappear.
The NBCON kthreads for console printing are started very early
during boot using early_initcall(). Since these kthreads are
asynchronously enabling/disabling interrupts during early boot, they
may be interfering with early SMP setup on some hardware platforms.
Starting the console printing kthreads later has shown to avoid the
hanging on systems that could previously reproduce the issue.
Postpone kthread starting until after all arch initcalls have
completed. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: xiic: restore non-managed runtime PM to fix clk WARN flood
The devres conversion replaced manual pm_runtime_enable()/disable() with
devm_pm_runtime_set_active_enabled() and dropped the remove-time runtime
PM teardown. The managed release tears runtime PM down in the wrong
order: it calls pm_runtime_dont_use_autosuspend() before
pm_runtime_disable(), i.e. while runtime PM is still enabled, and devres
is LIFO so the devm_clk_get_enabled() release runs afterwards.
At remove(), pm_runtime_put_sync() leaves the device active with the
autosuspend timer armed. Clearing use_autosuspend then makes rpm_idle()
suspend immediately, and xiic_i2c_runtime_suspend() clk_disable()s the
clock. The later devm_clk_get_enabled() release clk_disable_unprepare()s
the already-disabled clock, so clk_core_disable() WARNs ("clkN already
disabled") on every teardown.
Drop the managed helper and restore the non-managed runtime PM setup and
teardown, so runtime PM is enabled once in probe and disabled once in
remove and the clock enable count stays balanced.
Order the remove teardown so runtime PM is disabled before the usage
count is dropped: pm_runtime_disable() followed by pm_runtime_put_noidle()
instead of pm_runtime_put_sync(). Dropping the count first with autosuspend
still enabled arms the autosuspend timer, and a preemption before
pm_runtime_disable() lets it expire, suspend the device and clk_disable()
the clock, which the devm release then disables again - the same WARN.
Restore the non-managed IRQ request as well. The probe error paths now
unwind runtime PM by hand via goto, and a devm-registered handler is only
freed later during devres unwind, so it would stay live across the manual
teardown (and across any future failing step added after it). Request the
IRQ with request_threaded_irq() and free it explicitly in the probe error
path and in remove. The probe error path also clears use_autosuspend, to
match the teardown in remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: Avoid infinite retry loop in init_vp_index()
There is a retry loop in init_vp_index() where the CPUs from a certain
node are stripped out if they have already been in the allocated cpumask
or not in HK_TYPE_MANAGED_IRQ housekeeping cpumask. If there is no
CPU left, the allocated cpumask is ignored and the process is retried
again. However, if the HK_TYPE_MANAGED_IRQ housekeeping cpumask turns
out not to contain any CPU in that particular node, that will become an
infinite retry loop. This particular problem was reported by sashiko
[1]. This should rarely happen, but we still need to guard against this.
Fix this infinite loop problem by also skipping NUMA node that has no
housekeeping CPU in the inner while loop of init_vp_index(). Also update
the early abort check to check for the absence of online housekeeping
CPUs instead of just the emptiness of the cpumask. As the outer for
loop will only be reached if the housekeeping cpumask has at least one
online CPU, a NUMA node with housekeeping CPUs will eventually be found. |
| IBM Concert 1.0.0 through 3.0.0 could allow a remote attacker to cause a denial of service using a specially crafted regular expression that would cause excessive resource consumption. |
| IBM Concert 1.0.0 through 3.0.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. |
| IBM Concert 1.0.0 through 3.0.0 could allow a local attacker to obtain sensitive information due to recursive copying of build context directories into container images. |
| IBM Concert 1.0.0 through 3.0.0 is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks. |
| IBM Concert 1.0.0 through 3.0.0 could allow a remote authenticated attacker to cause a denial of service due to improper enforcement of storage limits. |
| IBM Concert 1.0.0 through 3.0.0 could allow a remote authenticated attacker to access or modify unauthorized resources due to the use of wildcards in RBAC permission definitions. |
