| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An out-of-bounds write vulnerability exists in the JPEG2000Codec::DecodeByStreamsCommon functionality of Mathieu Malaterre Grassroot DICOM 3.0.23. A specially crafted DICOM file can lead to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability. |
| Out-of-bounds write in libsavsac.so prior to SMR Jul-2026 Release 1 allows remote attackers to execute arbitrary code. |
| Memory corruption in V8 in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted Chrome extension. (Chromium security severity: Low) |
| Memory corruption in Codecs in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| A weakness has been identified in valkey-io valkey up to 9.0.5/9.1.1. This affects the function kvstoreGetHashtable of the file src/kvstore.c. This manipulation of the argument didx causes out-of-bounds read. It is possible to initiate the attack remotely. The attack is considered to have high complexity. It is indicated that the exploitability is difficult. The exploit has been made available to the public and could be used for attacks. Patch name: 4691888e7fab3df128f0bde5750c9fde2ae552fa. To fix this issue, it is recommended to deploy a patch. Exploitation requires cluster mode plus attacker-controlled dump.rdb at startup (data-dir write access, replication feed, or a stored crafted RDB) - an attacker-position DoS at boot, not network pre-auth. The issue report was closed stating it "is worth fixing for the sake of memory safety… but I don't think it meets our bar for a security disclosure." |
| A vulnerability was determined in Cesanta mJS up to 1.26. Affected is the function skip_spaces_and_comments of the file src/mjs_tok.c. Executing a manipulation can lead to heap-based buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in D-Link DIR-822A A_101. Affected is the function tunnel_set_params of the component L2TP Control Message Parser. Such manipulation leads to out-of-bounds write. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was determined in D-Link DIR-822A A_101. This vulnerability affects the function strcpy of the file udhcpcd/serverpacket.c of the component udhcpcd. This manipulation causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. |
| A flaw has been found in java-json-tools json-patch up to 1.13. Affected is the function JsonMergePatch.fromJson of the file JsonMergePatchDeserializer.java. Executing a manipulation can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in ModelCloud GPTQModel up to 7.2.0. This vulnerability affects unknown code of the file gptqmodel/nn_modules/qlinear/tritonv2.py of the component Triton dequantization kernel. Such manipulation of the argument g_idx leads to out-of-bounds read. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 7.3.0 is able to resolve this issue. The name of the patch is 877c732f7d7dccd56a729844c6a5bd20f3aa8bb1. Upgrading the affected component is recommended. |
| A vulnerability was found in Tenda HG10 300001138. This vulnerability affects the function formURL of the file /boaform/admin/formURL. Performing a manipulation of the argument Keywd/urlFQDN results in buffer overflow. The attack may be initiated remotely. The exploit has been made public and could be used. |
| A vulnerability was determined in 92181 markdown up to 058cab0cb7fb245a0ccc6b8446963ff8d573558f. Affected by this issue is the function lds of the file md.c. Executing a manipulation can lead to out-of-bounds read. The attack can be executed remotely. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. This patch is called c000d2f9cf390c315378d3717cf20911cf3e80a6. A patch should be applied to remediate this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: microread: validate target discovery payload lengths
microread_target_discovered() parses target discovery payloads from
skb->data according to the HCI gate. The fixed field offsets and UID
copies were checked only against the destination nfc_target buffers, not
against the actual skb length.
Validate that each gate-specific payload contains the fixed fields and
UID bytes before reading or copying them. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: fdp: bound the device-reported read length and fix an skb leak
fdp_nci_i2c_read() takes the next packet length from two device-supplied
bytes and never validates it. The value is a u16 used as the
i2c_master_recv() count into a 261-byte on-stack buffer: a malicious,
counterfeit or malfunctioning controller (or an i2c bus interposer) can
drive it far past the buffer for a stack out-of-bounds write that
clobbers the canary and return address, or below the minimum frame size
(directly, or by truncating the computed sum) so the header/LRC strip
and the next length read run past a short receive. Reject a length
outside [FDP_NCI_I2C_MIN_PAYLOAD, FDP_NCI_I2C_MAX_PAYLOAD], as a
corrupted packet already is, and force resynchronization.
The same loop allocates one data skb per iteration and assumes a length
packet followed by a data packet; a device that sends two data packets
in one call leaks the first skb when the second allocation overwrites
it. Free a previously allocated skb before allocating the next. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: reject PDUs shorter than the LLCP header
Every LLCP PDU begins with a two-byte header (DSAP/SSAP + PTYPE), but the
receive path never checked that a frame is at least LLCP_HEADER_SIZE bytes
before parsing it.
nfc_llcp_rx_skb() reads the header via nfc_llcp_ptype()/nfc_llcp_dsap()/
nfc_llcp_ssap(), which dereference pdu->data[0] and pdu->data[1], and a
CONNECT or CC PDU then computes
tlv_array_len = skb->len - LLCP_HEADER_SIZE;
as a size_t and hands it to the TLV walk. When the frame is shorter than
the header the subtraction wraps to a huge value and the walk runs far
past the buffer, an out-of-bounds read.
A nearby NFC device can reach this without authentication; LLCP link
activation happens automatically after NFC-DEP.
Guard the common receive choke point __nfc_llcp_recv(), shared by both the
target (nfc_llcp_data_received()) and initiator (nfc_llcp_recv()) paths, so
a short skb is dropped before the rx_work worker parses it. Use
pskb_may_pull() rather than a skb->len test so the two header bytes are
guaranteed to sit in the skb linear area even for a non-linear skb,
matching how the sibling NCI and HCI receive paths validate their headers.
Reproduced with a KFENCE out-of-bounds read via /dev/virtual_nci on
linux-next.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Validate AIBV and AISB before pinning guest pages
The AIBV holds one bit per MSI-X vector for a given function. The size of
the bit vector is derived from the NOI and the AIBVO. If the size of the
AIBV exceeds a single page boundary, then reject the request as we cannot
safely pin the guest AIBV.
Similarly reject the request if the AISB address is not 8-byte aligned as
the architecture requires doubleword alignment for the summary bit address.
Since the AISBO can address up to 64 bits, the size of the AISB can only be
8 bytes for the function. This also ensures the AISB doesn't exceed a
single page boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SDCA: Make UMP message size check more robust
If message offset was larger than the buffer length the size
check will pass incorrectly. Refactor the check such that it is
more robust to invalid sizes. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qce - fix CCM AAD buffer underallocation
The AAD buffer allocated in qce_aead_ccm_prepare_buf_assoclen()
can be smaller than the length later programmed into the DMA
scatterlist.
The allocation size is currently calculated as:
ALIGN(assoclen, 16) + MAX_CCM_ADATA_HEADER_LEN
while the DMA length is set to:
ALIGN(assoclen + adata_header_len, 16)
Since ALIGN() does not distribute over addition, the allocation
can be smaller than the DMA length. For example, when
assoclen = 32 and adata_header_len = 2:
allocation = ALIGN(32, 16) + 6 = 38
DMA length = ALIGN(32 + 2, 16) = 48
As a result, the QCE hardware can read beyond the allocated
buffer while computing the CBC-MAC over the associated data.
The extra bytes are folded into the authentication tag,
resulting in an incorrect tag and causing CCM self-test
failures such as:
alg: aead: ccm-aes-qce encryption test failed (wrong result)
on test vector 8
Fix the allocation by adding the maximum possible AAD header
length before alignment:
ALIGN(assoclen + MAX_CCM_ADATA_HEADER_LEN, 16)
This guarantees that the allocated buffer is large enough
for the fully padded AAD data for all supported header sizes. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix UVD dpb min size calculation for H264
This should use actual number of references from the decode
message, instead of maximum derived from level.
(cherry picked from commit 64b525edb7e7bdfcdc77883c5e413804e2396856) |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound the attribute-list entry in ntfs_read_inode_mount()
The $MFT attribute-list walk in ntfs_read_inode_mount() validates each
entry only with "(u8 *)al_entry + 6 > al_end" and
"(u8 *)al_entry + le16_to_cpu(al_entry->length) > al_end", but then reads
al_entry->lowest_vcn (an __le64 at offset 8) and al_entry->mft_reference
(offset 16) -- fields beyond the 6 bytes proven in range. al_entry->length
is attacker-controlled and only required non-zero, so a short entry (e.g.
length 8) placed at the tail passes both checks while the lowest_vcn /
mft_reference reads fall past al_end.
al_end is ni->attr_list + attr_list_size (the on-disk size); the buffer is
kvzalloc(round_up(attr_list_size, SECTOR_SIZE)), so the sector rounding
usually absorbs the over-read -- but when attr_list_size is a multiple of
SECTOR_SIZE there is no slack and a crafted $MFT attribute list produces an
out-of-bounds read at mount time.
Validate the entry with ntfs_attr_list_entry_is_valid() (added in patch
1/3) before dereferencing it, matching the bound the other attribute-list
walks now use. The validator already requires the length to cover the fixed
header, which makes the separate "!al_entry->length" check redundant, so
drop it too. |
