| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read / stack overflow in rtw_get_wps_attr()
rtw_get_wps_attr() walks WPS attributes inside a WPS IE taken from
a wireless management frame. For each candidate attribute it only
checks that the fixed 4-byte attribute header (2-byte ID + 2-byte
length) fits inside the IE:
if (attr_ptr + 4 > wps_ie + wps_ielen)
break;
u16 attr_id = get_unaligned_be16(attr_ptr);
u16 attr_data_len = get_unaligned_be16(attr_ptr + 2);
u16 attr_len = attr_data_len + 4;
attr_data_len (and therefore attr_len) is read directly from the
wire and is never checked against the remaining bytes in the IE
before being used as the size of:
memcpy(buf_attr, attr_ptr, attr_len);
Since attr_len is fully attacker controlled (0 to 65535+4), this is
both a heap OOB read of wps_ie, and, more seriously, a stack buffer
overflow at several call sites where buf_attr is a single-byte
stack variable, e.g. rtw_get_wps_attr_content()'s callers passing
WPS_ATTR_SELECTED_REGISTRAR into a stack "u8 sr"/"u8
selected_registrar" (drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c,
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c). A crafted WPS IE in a
beacon or probe response processed during scanning can therefore
smash the stack of the parsing thread.
rtw_get_wps_attr_content() itself has no independent length check
and simply trusts the attr_len it gets back from rtw_get_wps_attr(),
so fixing the bound here also fixes that caller.
The "attr_ptr + 4 > wps_ie + wps_ielen" header check above was added
by commit 1463ca3ec6601 ("staging: rtl8723bs: fix OOB reads in
rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()"), which
bounded the fixed header but never extended the check to cover the
variable-length attribute data that follows it. Add that missing
check before attr_len is used as a memcpy() length or accepted as a
match. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output()
The snd_usbmidi_us122l_output() picks a count of 2 on anything slower
than high speed and never relates it to ep->max_transfer. The URB
buffer holds exactly max_transfer bytes, so a device declaring a one
byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the
memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX.
Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at
0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the
USB core only clamps downward.
The akai and novation output ops in this file were given the same guard
recently. Do the same here. |
| In Eclipse Ankaios versions 0.6.0 to before 1.0.4, `LogRule::matches` in the agent control-interface authorizer stops at the first wildcard pattern in a single rule instead of evaluating later entries, which can cause deny `LogRule` entries to be skipped and allow unauthorized access to another workload's logs. |
| Craft CMS 4.8.0 through 4.18.5 and 5.0.0 through 5.10.12 sign an authenticated user's attacker-controlled license-shun cookie with the same key and format used to validate signed redirect parameters, because the HMAC signature is not bound to its purpose (Yii's cookieValidationKey is derived from the same Craft securityKey used for signed request parameters). An authenticated, non-administrator user (Control Panel access is not required) can set the cookie via the license-shun endpoint and transplant the signed envelope into the redirect parameter; on a successful login, Craft validates the signature and renders the authenticated bytes as an unsandboxed Twig template, where Twig's map filter accepts a string callback and allows PHP system() to execute arbitrary operating-system commands as the web-server user. Exploitation requires an account using password authentication without active 2FA, the default request configuration, and availability of PHP system(). The issue is fixed in 4.18.6 and 5.10.13. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Don't hand out the flat CCS storage as usable VRAM
get_flat_ccs_offset() reads the base of the flat CCS storage from the
hardware, scales it by the number of enabled L3 nodes, and rounds the
result up to 128K. Everything below that offset is then handed to the
VRAM allocator as usable memory.
Rounding a limit that means "usable memory ends here" upwards publishes
whatever lies between the real base and the rounded one as free memory,
and that memory belongs to the compression hardware. The scaled value
has no reason to be 128K aligned, and on a Battlemage G21 with 16 GiB it
is not:
flat CCS base: raw 0x3fafff800, rounded 0x3fb000000
so the last 2 KiB of page 0x3fafff000 is CCS storage, in the allocator's
pool. Whatever is allocated there gets that tail overwritten by the
compression hardware, which needs no page-table entry, no buffer object
and no GPU submission to do it, and does it before userspace exists.
On this machine a Mesa VM's level-3 page table landed on that page on
every cold boot. It lost the entry covering the compositor's
batch-buffer heap, so the compositor's first submission faulted fetching
its batch and gdm restarted it forever: a black screen on an otherwise
working machine. Restarting gdm cleared it because the next VM's page
tables were allocated somewhere else.
Round down instead, to the page size the allocator works in. On this
machine that excludes exactly one page.
Reading the reserved page afterwards shows what had been writing it:
[369] 0xcccc000000000000
[371] 0xcc77000000000000
[373] 0xcccc000000000000
[375] 0xcc77000000000000
compression metadata, two bytes per sixteen, sitting where the driver
used to hand out memory.
The assertion that should have caught this compares the offset against
GSMBASE - ccs_size for equality. That value is 128K aligned, so it
agrees with the rounded-up offset precisely when the base is not
aligned - the check cannot fail in the case it exists to catch, and is
compiled out unless CONFIG_DRM_XE_DEBUG is set. Replace it with one
that can fail: CCS storage must not run into GSM.
[ And this was a debug session from hell, enormously helped by an AI
doing much of the grunt-work.
I'd like to call it my tireless helper, but the AI several times
stated flat out that this was impossible and unsolvable and that we
should just write a report about it.
I suspect those things have been trained by people who may not be
quite as stubborn as I am.
But while the AI was ready to give up several times, it did keep
adding debug code and analyzing it faithfully when I pushed. So credit
where credit is due and I let the AI write the commit message above.
This is basically a one-liner fixing a bogus "round_up()" to a
"round_down()", but there were 24 patches adding more and more debug
information to this, and 18 kernel boot to finally narrow it down to
this. - Linus ] |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
wacom_intuos_pro2_bt_irq() receives the wire report length in `len`
but never consults it before parsing. After the report-id gate it
unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by
features.type, a fixed chain of sub-parsers, none of which receive
`len`:
wacom_intuos_pro2_bt_pen(wacom);
if (type == INTUOSP2_BT || type == INTUOSP2S_BT) {
wacom_intuos_pro2_bt_touch(wacom);
wacom_intuos_pro2_bt_pad(wacom);
wacom_intuos_pro2_bt_battery(wacom);
} else {
wacom_intuos_gen3_bt_pad(wacom);
wacom_intuos_gen3_bt_battery(wacom);
}
Each sub-parser dereferences wacom->data at fixed offsets. The furthest
byte touched on each branch is:
INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285]
(the touchring byte), so the report must be at least 286 bytes;
INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45],
so the report must be at least 46 bytes.
features.type is selected from the VID/PID id_table entry and
wacom_setup_device_quirks() force-registers the pen/pad/touch inputs
for that type independent of the report descriptor, so a malicious or
malfunctioning paired/spoofed Bluetooth peripheral can advertise that
VID/PID and send an undersized report that still satisfies the
data[0] == 0x80/0x81 gate. The driver then reads past the received
report and forwards the bytes to userspace via evdev (MSC_SERIAL /
ABS_MISC / ABS_WHEEL on the pen and pad input nodes), an out-of-bounds
read with a concrete userspace read-back channel, and a true
out-of-bounds read on transports whose backing buffer is sized to the
(small) report descriptor rather than a fixed-size staging buffer.
This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix
out-of-bounds read in wacom_intuos_bt_irq") already hardened in the
sibling wacom_intuos_bt_irq(), which guards each report id against its
minimum length before parsing.
Guard wacom_intuos_pro2_bt_irq() the same way: before parsing, reject
reports shorter than the furthest offset the selected branch actually
dereferences, warn, and bail out. Because the whole pen/touch/pad/
battery chain runs unconditionally per branch, a single up-front check
against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT,
46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on
a short report also skips those calls for the same malformed report,
which is the safe, conservative behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/mm: fix wrong addr_pfn tracking in compound vmemmap population
vmemmap_populate_compound_pages() uses addr_pfn to determine the PFN
offset within a compound page and to decide whether the current vmemmap
slot should be populated as a head page mapping or should reuse a tail
page mapping.
However, addr_pfn is advanced manually in parallel with addr. The loop
itself progresses in vmemmap address space, so each PAGE_SIZE step in addr
covers PAGE_SIZE / sizeof(struct page) struct page slots. Since addr_pfn
is compared against nr_pages in data-PFN units, it should advance by the
same number of PFNs. The existing manual increments do not match that and
therefore do not reliably track the PFN corresponding to the current addr.
As a result, pfn_offset can be computed from the wrong PFN and the code
can make the head/tail decision for the wrong compound-page position.
Fix this by deriving addr_pfn directly from the current vmemmap address
instead of carrying it as loop state. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: return early from a zero-length flush
SYNC_BO does not constrain its size, so a request for zero bytes reaches
drm_clflush_virt_range(), which ends with an unconditional
clflushopt(end - 1). For an empty range that is the byte before the
mapping, and abo->mem.kva comes from vmap(), so the access lands in the
guard page below the vmalloc area and faults:
BUG: unable to handle page fault for address: ffffd16fbbc70fff
#PF: supervisor read access in kernel mode
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 7 UID: 1000 Comm: sync_bo_probe
RIP: 0010:drm_clflush_virt_range+0x3c/0x70
Call Trace:
amdxdna_drm_sync_bo_ioctl+0x124/0x430 [amdxdna]
drm_ioctl+0x301/0x4c0
__x64_sys_ioctl+0x115/0x2f0
do_syscall_64+0xa6/0x3d0
Any process that can open the render node can do this. Reproduced 3 of 3
times on a Strix Point NPU (1022:17f0), by calling SYNC_BO with size 0 on
an AMDXDNA_BO_SHARE object. The import arm takes the same request but
flushes the whole scatterlist, so it survives it.
Nothing needs flushing for an empty range, so answer before choosing a
path. |
| Wire provides gRPC and protocol buffers for Android, Kotlin, Swift, and Java. Prior to 6.4.5 and 7.0.0-alpha04, Wire protobuf readers do not consistently validate attacker-controlled lengths against the current logical message boundary before advancing cursors, pointers, limits, slices, or allocations. In Kotlin, ProtoAdapter.decode(ByteArray) and ProtoAdapter.decode(ByteString) use ByteArrayProtoReader32.internalNextLengthDelimited(), where a positive oversized length can wrap pos + length to a negative limit and escape the existing negative-length check. Related ProtoReader, ReadBuffer.readVarint(), ReadBuffer.verifyAdditional(count:), packed-repeated, nested-message, and ProtoDecoder.decodeSizeDelimited(_:from:) paths can cross logical boundaries, perform pointer arithmetic, reserve capacity, or convert an unrepresentable size before proving the requested bytes exist. An attacker who supplies malformed protobuf bytes can cause unchecked exceptions, traps, out-of-bounds behavior, or excessive allocation, resulting in denial of service without known confidentiality, integrity, or code-execution impact. This issue is fixed in versions 6.4.5 and 7.0.0-alpha04. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Correctly handle end of VA space TLBI invalidation
Our TLB invalidation by VA code is based on comparing two ranges,
one defined by the TLB, and one defined by the TLBI instruction.
Each range is defined by a start and a size. However, the way the
comparison is done doesn't account for address rollover, as it
compares an address with (base + size). This works nicely until
this expression represent the last page/block in the TTBR1 VA space,
as the result is a big fat 0. And a failed TLB invalidation.
Rewrite the comparison in a way that is immune to the address
rollover (making the end address inclusive instead of exclusive),
and move this into a common helper that is used by both VA and IPA
invalidations, as suggested by Hyunwoo Kim (although the IPA version
didn't suffer from this particular problem, obviously). |
| In the Linux kernel, the following vulnerability has been resolved:
media: tda18250: fix possible integer overflow
Integer overflow may occur, when variable exp equals to zero. Result
of shift 1 << (exp - 1) may then leads to undefined behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
media: s2255: bound JPEG frame size before copying into the buffer
s2255_fillbuff() memcpy()s vc->jpg_size bytes of a captured JPEG/MJPEG
frame into the vb2 plane. vc->jpg_size is taken verbatim from the
S2255_MARKER_FRAME header the device sends (pdword[4] in save_frame())
and, unlike the frame payload length just above it, is never bounded:
payload = le32_to_cpu(pdword[3]);
if (payload > vc->req_image_size) /* payload is checked ... */
return -EINVAL;
vc->pkt_size = payload;
vc->jpg_size = le32_to_cpu(pdword[4]); /* ... jpg_size is not */
A malicious or malfunctioning device can therefore report a jpg_size
larger than the destination vb2 plane, and the memcpy() writes past it.
jpg_size is a signed int, so a value with the top bit set also turns
into a huge length.
Reject a frame whose jpg_size is negative or exceeds the plane size
before copying it. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure
rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(),
rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and
shares a single err: label that only unlocks the mutex and returns.
When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs()
itself returns -ENOMEM after alloc_stream_bufs() has already succeeded,
the URBs and/or the coherent DMA stream buffers stay allocated while
streaming reports failure to vb2. Two latent defects follow on the next
VIDIOC_STREAMON:
1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num
to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently
leaking the coherent DMA memory allocated by the previous attempt.
2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only
increments it. After a second successful pass urbs_initialized can
exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks
from urbs_initialized - 1 down to 0 and reads past the end of
dev->urb_list[], passing garbage pointers to usb_free_urb().
Mirror the teardown that stop_streaming() already performs: on the error
path call rtl2832_sdr_free_urbs() and rtl2832_sdr_free_stream_bufs()
before unlocking. Both helpers are idempotent (free_urbs kills and zeros
urbs_initialized; free_stream_bufs is gated on URB_BUF and clears the
buf_num counter), so partial-failure paths and the no-allocation paths
remain safe.
Issue identified by automated review of the INV-003 series at
https://sashiko.dev/ |
| oRPC is an tool that helps build APIs that are end-to-end type-safe and adhere to OpenAPI standards. Prior to 1.14.8, the @orpc/server CORS plugin in packages/server/src/plugins/cors.ts copies a client's incoming Vary request header into the response instead of controlling Vary as a response-only header and using Origin for request-origin variation. In deployments behind a shared cache, CDN, or reverse proxy that keys responses using Vary, a client can inject arbitrary variation values, pollute cache keys, and cause inconsistent CORS enforcement for other clients. Default non-cached configurations have no established direct confidentiality, integrity, or availability impact. This issue is fixed in version 1.14.8. |
| Canva Desktop before v1.125.0 performed double decoding in the deeplink handler. A threat actor could cause the application to load arbitrary same-origin content under the user’s session. |
| Nodemailer before 9.1.0 contains a quadratic time complexity vulnerability in the addressparser component that allows remote attackers to cause denial of service by supplying a crafted comma-separated address list. Attackers can send a single email with a large number of addresses to block the Node.js event loop for extended periods, consuming 100% CPU and freezing the process. |
| vm2 versions 3.11.4 through 3.11.6 incompletely filter Node.js registered internal symbols across the sandbox boundary. The extraction filters in lib/setup-sandbox.js and the cross-realm symbol checks and write traps in lib/bridge.js use a fixed list of known dangerous registered symbols that omits nodejs.stream.disturbed and nodejs.stream.errored, which are exposed on host WebStream prototypes on newer Node.js releases (validated on Node.js v25.8.0). When the embedder exposes a host WebStream object and the host stream/web module to the sandbox, sandbox code can obtain the real host symbols via Object.getOwnPropertySymbols(streamWeb.ReadableStream.prototype) and use them as write keys on host stream objects, corrupting host-visible stream state — for example making stream.Readable.isDisturbed() return false for an already-consumed stream. This can bypass host logic that relies on Node's public stream-state helpers to enforce one-shot body consumption, reject errored streams, or decide whether a stream is safe to hand to another component. It is not a host code-execution primitive in the reported proof of vulnerability. This is an incomplete fix for the earlier nodejs.* symbol filtering issue. Fixed in vm2 3.11.7. |
| Out-of-bounds read in Windows Win32K - GRFX allows an authorized attacker to elevate privileges locally. |
| vm2 before 3.11.7 contains a module allowlist bypass vulnerability in isPathAllowedForModule that uses raw string prefix matching instead of boundary-anchored comparison. Attackers can reach non-allowlisted packages sharing a prefix with allowlisted modules by performing relative requires from allowlisted packages when transitive loading is disabled. |
| Heap-based buffer overflow in Windows Internet Key Exchange (IKE) Protocol allows an unauthorized attacker to deny service over a network. |
