| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix out-of-bounds write in irdma_copy_user_pgaddrs
The irdma_copy_user_pgaddrs function loops through all of the umem DMA
blocks to populate the PBLEs and will stop when either the last DMA
block is reached or palloc->total_cnt is reached. The issue is that
the logic for checking palloc->total_cnt would only work for non-zero
values.
When irdma_setup_pbles is called with lvl==0, it
calls irdma_copy_user_pgaddrs with palloc->total_cnt==0, which means
the only way to break out of the loop is to reach the last umem DMA
block, which means it could end up going beyond the fixed size of 4
iwmr->pgaddrmem array that is used in the lvl==0 case.
In the case of QP/CQ/SRQ rings, the value of lvl is determined by a
separate input (for example, req.cq_pages in the case of a CQ). So,
we must perform explicit checking to ensure we don't overflow the
pgaddrmem array if the user provides a umem that consists of more
blocks than their provided req.cq_pages. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size
vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB
binner BO, but writes the size of the whole BO to BPOS. On every binner
out-of-memory event the PTB is therefore authorized to write tile lists
across all the other slots (which may hold the tile state, tile alloc and
overflow memory of in-flight jobs) and, for any slot but the first, past
the end of the binner BO into unrelated CMA memory.
Since CMA pages are recycled into page cache and user allocations, this
is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU
hangs with corrupted control list pointers, userspace heap corruption, a
GPU that stays permanently wedged after the first hang, and occasional
full system crashes, whenever a job overflows the initial binner slot.
The bug dates back to the conversion from a dedicated overflow BO (where
writing the full BO size was correct) to the slotted binner BO. |
| Libevent is an event notification library. Prior to 2.1.13 and 2.2.2-alpha, libevent has a heap out-of-bounds write in bufferevent_sock.c when bufferevent_socket_set_conn_address_ copies a kernel-supplied AF_UNIX peer address into bufferevent_private.conn_address. Release builds compiled with NDEBUG disable the EVUTIL_ASSERT length guard, and the evhttp accept path can pass a 110-byte sockaddr from accept() into the 28-byte field. An unauthenticated local peer able to connect to an AF_UNIX listener can overwrite the adjacent dns_request pointer and heap data, causing memory corruption with confidentiality, integrity, and availability impact. This issue is fixed in versions 2.1.13 and 2.2.2-alpha. |
| SumatraPDF is a multi-format reader for Windows. In 3.6.1 and earlier, a crafted CHM file can supply malformed LZX Huffman code lengths to make_decode_table in ext/CHMLib/lzx.c. In the long-code branch, the function writes new internal nodes through next_symbol before validating that the canonical Huffman table has overflowed. The PRETREE case can write beyond the 104-entry PRETREE_table into adjacent heap state in struct LZXstate when reached through chm_open, chm_retrieve_object, LZXdecompress, and BUILD_TABLE. This produces heap memory corruption in the parser process, while arbitrary code execution has not been demonstrated. No fixed version is available as of this review. |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. Prior to 2.3.2, the DELETE /ssh/tunnel/disconnect/:tunnelName teardown path in src/backend/ssh/tunnel.ts interpolates endpointPort, sourcePort, endpointUsername, and endpointIP into single-quoted pkill -f patterns. An authenticated user who can edit a tunnel host field can include a single quote to terminate the pattern and append a shell command, which executes when the tunnel is disconnected. Successful exploitation runs arbitrary commands on the source SSH host with the privileges of the connected SSH account. This issue is fixed in version 2.3.2. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: hold event_mutex while checkpointing CRIU events
kfd_criu_checkpoint_events() counts the entries in p->event_idr via
kfd_get_num_events(), allocates an array sized to that count, and then
walks the same IDR to fill it. Neither the count nor the walk holds
p->event_mutex.
The CRIU checkpoint caller holds only p->mutex. Event create and destroy
(kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not
take p->mutex, so a second thread in the same process can insert or remove
events between the count and the walk. If an event is inserted, the walk
iterates more entries than were counted and writes past the end of the
ev_privs allocation; if an event is removed, the walk dereferences an
entry that is being freed.
Hold p->event_mutex across the count and the walk so both observe a
consistent view of p->event_idr. The lock is released before
copy_to_user(), which only touches the local buffer. The caller already
holds p->mutex and the create/destroy paths never take p->mutex, so the
p->mutex -> p->event_mutex order is not inverted and no deadlock is
introduced.
(cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment
eop_ring_buffer_size in struct queue_properties is a u32. In
kfd_queue_acquire_buffers() the expected EOP buffer size is computed as
ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the
addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to
0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on
size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD
cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB
BO, so CP EOP writes can land past the buffer and fault the GPU.
Cast the operand to u64 so the alignment is computed in 64-bit; the size
check in kfd_queue_buffer_get() then rejects the oversized request.
(cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Clamp frame size in implicit-feedback mode
snd_usb_handle_sync_urb() scales received sync packet sizes by the sender's
stride and stores the result directly in out_packet->packet_size[i]. If a
connected USB device sends an oversized sync packet, this frame count can
exceed ep->maxframesize.
The un-clamped frame count then propagates to the playback endpoint queue,
potentially driving packet transfers beyond the endpoint's hardware frame
limits.
Cap the calculated frame count against ep->maxframesize in
snd_usb_handle_sync_urb() to prevent oversized packets from entering the
playback queue. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set
When a USB audio endpoint requests full packet transfers via the fill_max
descriptor flag, data_ep_set_params() promotes ep->curpacksize to
ep->maxpacksize. However, maxsize is left at the original sample-rate
derived value.
Since u->buffer_size is allocated as maxsize * packets, the resulting
DMA buffer is far too small for the requested transfer length. When the
USB host controller streams up to curpacksize bytes per packet, it writes
past the end of the buffer via DMA, corrupting kernel heap memory.
Update maxsize to curpacksize when fill_max is set so that the allocated
DMA buffer size matches the actual transfer request size.
[ changed to reassign maxsize only when ep->fill_max is set -- tiwai ] |
| An issue in Tneda W20E v.16.01.0.6(2782) allows a remote attacker to execute arbitrary code via the url_need_login function |
| SiYuan before 3.7.4 fails to properly escape workspace directory paths when constructing command-line arguments for the elevated elevator.exe helper process. Attackers can create a malicious workspace directory with command metacharacters in its path and trigger the Microsoft Defender exclusion flow to execute arbitrary commands with administrator privileges after UAC approval. |
| The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.33.1, src/main/java/com/rabbitmq/client/impl/ValueReader.java uses ValueReader.readBytes to accept a wire-declared contentLength below Integer.MAX_VALUE and allocate a byte array before checking the bytes available in the frame. A malicious AMQP peer can send a LongString or byte-array field with type tag S and a declared length such as 0x7FFFFFFE during the pre-authentication connection.start server-properties table, causing an approximately 2 GB allocation and OutOfMemoryError before readFully consumes data. The resulting memory exhaustion can terminate the JVM and cause denial of service. This issue is fixed in version 5.33.1. |
| Cudy WR3000 2.0 running firmware before 2.5.24 contains an OS command injection vulnerability that allows authenticated attackers to execute arbitrary OS commands with root privileges by sending unsanitized input through the mesh MQTT command interface. The sync_command binary forwards unsanitized input directly to a shell execution sink in command.lua, enabling attackers with access to the MQTT broker to exploit the default-enabled command execution path to achieve full root-level system compromise. |
| Uncontrolled memory allocation in the binary Ion stream cursor in Amazon ion-java before 1.12.0 might allow remote actors to cause a denial of service via a crafted Ion binary document containing a declared-length field that causes excessive heap preallocation.
To remediate this issue, users should upgrade to version 1.12.0. |
| libheif is a HEIF and AVIF file format decoder and encoder. In 1.23.0 and earlier, a crafted image sequence with a 2x2 primary plane and a 256x256 auxiliary alpha plane can cause attacker-controlled heap corruption during a normal decode and re-encode workflow. Track_Visual::decode_next_image_sample() calls transfer_channel_from_image_as() without checking that the auxiliary alpha dimensions match the main frame. The resulting inconsistent image reaches heif_track_decode_next_image() and then heif_context_encode_image(). In unc_encoder::encode(), unc_encoder_component_interleave::encode_tile() sizes its buffer with compute_tile_data_size_bytes() using the primary dimensions but copies each component using its actual plane dimensions. The oversized alpha plane is therefore copied beyond the allocation, causing an out-of-bounds write; the inverse size mismatch can also produce an out-of-bounds read. This issue is fixed in version 1.23.1. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 NIM could allow a remote authenticated attacker to execute arbitrary commands due to improper neutralization of special elements used in an OS command. |
| A
stack-based out-of-bounds write vulnerability exists in the login request
handling functionality of the administrative web interface of TP-Link TL-MR6400 v7 routers. An unauthenticated adjacent attacker can trigger the vulnerability
by sending a specially crafted malformed HTTP request.
Successful
exploitation may cause the web service process to crash, resulting in a
denial-of-service condition and temporary loss of access to the router's web
management interface. |
| FFmpeg before commit b4c199c contains an incorrect integer narrowing conversion in the AV1 RTP packetizer (libavformat/rtpenc_av1.c). The OBU size is cast to long before comparison against the remaining frame size. On targets where long is 32 bits, including 64-bit Windows, sufficiently large OBU size values are sign-flipped by the narrowing cast, producing a negative value that passes the payload size check. This allows an oversized OBU to bypass the safety bound on affected platforms, leading to out-of-bounds memory access when the oversized value is subsequently used as a copy length. |
| Wekan is open source kanban built with Meteor. Prior to 9.75, models/fileValidation.js interpolated the uploaded fileObj.path into the administrator-configured externalCommandLine at its {file} placeholder and executed the result through asyncExec, which is promisify(exec) and invokes `/bin/sh -c`. On deployments with an external scanner configured, an authenticated user able to upload an attachment could place shell metacharacters such as command substitutions in the filename and execute commands as the Wekan server process. Version 9.75 adds shellQuote() and passes the file path as a POSIX single-quoted argument so shell metacharacters cannot escape the placeholder. This issue is fixed in version 9.75. |
| Sony XAV-9500ES Crash Dump Handler Command Injection Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Sony XAV-9500ES devices. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.
The specific flaw exists within the handling of process crash dumps. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of root. Was ZDI-CAN-29061. |
