| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix sgtable leak on mapping failures
In an unlikely case when io_populate_area_dma() fails, which could only
happen on a PAGE_POOL_32BIT_ARCH_WITH_64BIT_DMA machine,
io_zcrx_map_area() will have an initialised and not freed table. It was
supposed to be cleaned up in the error path, but !is_mapped prevents
that. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: AV1: Fix tile info buffer size
Each tile info is composed of: row_sb, col_sb, start_pos
and end_pos (4 bytes each). So the total required memory
is AV1_MAX_TILES * 16 bytes.
Use the correct #define to allocate the buffer and avoid
writing tile info in non-allocated memory. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/sh_tmu: Always leave device running after probe
The TMU device can be used as both a clocksource and a clockevent
provider. The driver tries to be smart and power itself on and off, as
well as enabling and disabling its clock when it's not in operation.
This behavior is slightly altered if the TMU is used as an early
platform device in which case the device is left powered on after probe,
but the clock is still enabled and disabled at runtime.
This has worked for a long time, but recent improvements in PREEMPT_RT
and PROVE_LOCKING have highlighted an issue. As the TMU registers itself
as a clockevent provider, clockevents_register_device(), it needs to use
raw spinlocks internally as this is the context of which the clockevent
framework interacts with the TMU driver. However in the context of
holding a raw spinlock the TMU driver can't really manage its power
state or clock with calls to pm_runtime_*() and clk_*() as these calls
end up in other platform drivers using regular spinlocks to control
power and clocks.
This mix of spinlock contexts trips a lockdep warning.
=============================
[ BUG: Invalid wait context ]
6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted
-----------------------------
swapper/0/0 is trying to lock:
ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88
other info that might help us debug this:
context-{5:5}
1 lock held by swapper/0/0:
ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0
#0: ffff8000817ec298
ccree e6601000.crypto: ARM ccree device initialized
(tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8
stack backtrace:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT
Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
Call trace:
show_stack+0x14/0x1c (C)
dump_stack_lvl+0x6c/0x90
dump_stack+0x14/0x1c
__lock_acquire+0x904/0x1584
lock_acquire+0x220/0x34c
_raw_spin_lock_irqsave+0x58/0x80
__pm_runtime_resume+0x38/0x88
sh_tmu_clock_event_set_oneshot+0x84/0xd4
clockevents_switch_state+0xfc/0x13c
tick_broadcast_set_event+0x30/0xa4
__tick_broadcast_oneshot_control+0x1e0/0x3a8
tick_broadcast_oneshot_control+0x30/0x40
cpuidle_enter_state+0x40c/0x680
cpuidle_enter+0x30/0x40
do_idle+0x1f4/0x280
cpu_startup_entry+0x34/0x40
kernel_init+0x0/0x130
do_one_initcall+0x0/0x230
__primary_switched+0x88/0x90
For non-PREEMPT_RT builds this is not really an issue, but for
PREEMPT_RT builds where normal spinlocks can sleep this might be an
issue. Be cautious and always leave the power and clock running after
probe. |
| In the Linux kernel, the following vulnerability has been resolved:
media: radio-keene: fix memory leak in error path
Fix a memory leak in usb_keene_probe(). The v4l2 control handler is
initialized and controls are added, but if v4l2_device_register() or
video_register_device() fails afterward, the handler was never freed,
leaking memory.
Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure
the control handler is properly freed for all error paths after it is
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix device cleanup order to prevent kernel panic
Move video device unregistration to the beginning of the remove function
to ensure all video operations are stopped before cleaning up the worker
thread and disabling PM runtime. This prevents hardware register access
after the device has been powered down.
In polling mode, the hrtimer periodically triggers
wave5_vpu_timer_callback() which queues work to the kthread worker.
The worker executes wave5_vpu_irq_work_fn() which reads hardware
registers via wave5_vdi_read_register().
The original cleanup order disabled PM runtime and powered down hardware
before unregistering video devices. When autosuspend triggers and powers
off the hardware, the video devices are still registered and the worker
thread can still be triggered by the hrtimer, causing it to attempt
reading registers from powered-off hardware. This results in a bus error
(synchronous external abort) and kernel panic.
This causes random kernel panics during encoding operations:
Internal error: synchronous external abort: 0000000096000010
[#1] PREEMPT SMP
Modules linked in: wave5 rpmsg_ctrl rpmsg_char ...
CPU: 0 UID: 0 PID: 1520 Comm: vpu_irq_thread
Tainted: G M W
pc : wave5_vdi_read_register+0x10/0x38 [wave5]
lr : wave5_vpu_irq_work_fn+0x28/0x60 [wave5]
Call trace:
wave5_vdi_read_register+0x10/0x38 [wave5]
kthread_worker_fn+0xd8/0x238
kthread+0x104/0x120
ret_from_fork+0x10/0x20
Code: aa1e03e9 d503201f f9416800 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: synchronous external abort:
Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix potential zero beacon interval in beacon tracking
During fuzz testing, it was discovered that bss_conf->beacon_int
might be zero, which could result in a division by zero error in
subsequent calculations. Set a default value of 100 TU if the
interval is zero to ensure stability. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: pretend special inodes as regular files
Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()")
requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/
S_IFIFO/S_IFSOCK type, use S_IFREG for special inodes. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: correctly handle dm_bufio_client_create() failure
If either of the calls to dm_bufio_client_create() in verity_fec_ctr()
fails, then dm_bufio_client_destroy() is later called with an ERR_PTR()
argument. That causes a crash. Fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
EFI/CPER: don't go past the ARM processor CPER record buffer
There's a logic inside GHES/CPER to detect if the section_length
is too small, but it doesn't detect if it is too big.
Currently, if the firmware receives an ARM processor CPER record
stating that a section length is big, kernel will blindly trust
section_length, producing a very long dump. For instance, a 67
bytes record with ERR_INFO_NUM set 46198 and section length
set to 854918320 would dump a lot of data going a way past the
firmware memory-mapped area.
Fix it by adding a logic to prevent it to go past the buffer
if ERR_INFO_NUM is too big, making it report instead:
[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[Hardware Error]: event severity: recoverable
[Hardware Error]: Error 0, type: recoverable
[Hardware Error]: section_type: ARM processor error
[Hardware Error]: MIDR: 0xff304b2f8476870a
[Hardware Error]: section length: 854918320, CPER size: 67
[Hardware Error]: section length is too big
[Hardware Error]: firmware-generated error record is incorrect
[Hardware Error]: ERR_INFO_NUM is 46198
[ rjw: Subject and changelog tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fiemap page fault fix
In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode
glock. This can lead to recursive glock taking if the fiemap buffer is
memory mapped to the same inode and accessing it triggers a page fault.
Fix by disabling page faults for iomap_fiemap() and faulting in the
buffer by hand if necessary.
Fixes xfstest generic/742. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: Add support for TSV110 Spectre-BHB mitigation
The TSV110 processor is vulnerable to the Spectre-BHB (Branch History
Buffer) attack, which can be exploited to leak information through
branch prediction side channels. This commit adds the MIDR of TSV110
to the list for software mitigation. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ignore -EBUSY when checking nested events from vcpu_block()
Ignore -EBUSY when checking nested events after exiting a blocking state
while L2 is active, as exiting to userspace will generate a spurious
userspace exit, usually with KVM_EXIT_UNKNOWN, and likely lead to the VM's
demise. Continuing with the wakeup isn't perfect either, as *something*
has gone sideways if a vCPU is awakened in L2 with an injected event (or
worse, a nested run pending), but continuing on gives the VM a decent
chance of surviving without any major side effects.
As explained in the Fixes commits, it _should_ be impossible for a vCPU to
be put into a blocking state with an already-injected event (exception,
IRQ, or NMI). Unfortunately, userspace can stuff MP_STATE and/or injected
events, and thus put the vCPU into what should be an impossible state.
Don't bother trying to preserve the WARN, e.g. with an anti-syzkaller
Kconfig, as WARNs can (hopefully) be added in paths where _KVM_ would be
violating x86 architecture, e.g. by WARNing if KVM attempts to inject an
exception or interrupt while the vCPU isn't running. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: of: display_timing: fix refcount leak in of_get_display_timings()
of_parse_phandle() returns a device_node with refcount incremented,
which is stored in 'entry' and then copied to 'native_mode'. When the
error paths at lines 184 or 192 jump to 'entryfail', native_mode's
refcount is not decremented, causing a refcount leak.
Fix this by changing the goto target from 'entryfail' to 'timingfail',
which properly calls of_node_put(native_mode) before cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix RSS context delete logic
We need to free the corresponding RSS context VNIC
in FW everytime an RSS context is deleted in driver.
Commit 667ac333dbb7 added a check to delete the VNIC
in FW only when netif_running() is true to help delete
RSS contexts with interface down.
Having that condition will make the driver leak VNICs
in FW whenever close() happens with active RSS contexts.
On the subsequent open(), as part of RSS context restoration,
we will end up trying to create extra VNICs for which we
did not make any reservation. FW can fail this request,
thereby making us lose active RSS contexts.
Suppose an RSS context is deleted already and we try to
process a delete request again, then the HWRM functions
will check for validity of the request and they simply
return if the resource is already freed. So, even for
delete-when-down cases, netif_running() check is not
necessary.
Remove the netif_running() condition check when deleting
an RSS context. |
| Insufficient data validation in DataTransfer in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to perform arbitrary read/write via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: supply snapshot context in ceph_zero_partial_object()
The ceph_zero_partial_object function was missing proper snapshot
context for its OSD write operations, which could lead to data
inconsistencies in snapshots.
Reproducer:
../src/vstart.sh --new -x --localhost --bluestore
./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a'
mount -t ceph fs_a@.a=/ /mnt/mycephfs/ -o conf=./ceph.conf
dd if=/dev/urandom of=/mnt/mycephfs/foo bs=64K count=1
mkdir /mnt/mycephfs/.snap/snap1
md5sum /mnt/mycephfs/.snap/snap1/foo
fallocate -p -o 0 -l 4096 /mnt/mycephfs/foo
echo 3 > /proc/sys/vm/drop/caches
md5sum /mnt/mycephfs/.snap/snap1/foo # get different md5sum!! |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-mdp: Fix a reference leak bug in mtk_mdp_remove()
In mtk_mdp_probe(), vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put()
to prevent reference leak. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/atmel-hlcdc: fix memory leak from the atomic_destroy_state callback
After several commits, the slab memory increases. Some drm_crtc_commit
objects are not freed. The atomic_destroy_state callback only put the
framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function
to put all the objects that are no longer needed.
It has been seen after hours of usage of a graphics application or using
kmemleak:
unreferenced object 0xc63a6580 (size 64):
comm "egt_basic", pid 171, jiffies 4294940784
hex dump (first 32 bytes):
40 50 34 c5 01 00 00 00 ff ff ff ff 8c 65 3a c6 @P4..........e:.
8c 65 3a c6 ff ff ff ff 98 65 3a c6 98 65 3a c6 .e:......e:..e:.
backtrace (crc c25aa925):
kmemleak_alloc+0x34/0x3c
__kmalloc_cache_noprof+0x150/0x1a4
drm_atomic_helper_setup_commit+0x1e8/0x7bc
drm_atomic_helper_commit+0x3c/0x15c
drm_atomic_commit+0xc0/0xf4
drm_atomic_helper_set_config+0x84/0xb8
drm_mode_setcrtc+0x32c/0x810
drm_ioctl+0x20c/0x488
sys_ioctl+0x14c/0xc20
ret_fast_syscall+0x0/0x54 |
| In the Linux kernel, the following vulnerability has been resolved:
APEI/GHES: ensure that won't go past CPER allocated record
The logic at ghes_new() prevents allocating too large records, by
checking if they're bigger than GHES_ESTATUS_MAX_SIZE (currently, 64KB).
Yet, the allocation is done with the actual number of pages from the
CPER bios table location, which can be smaller.
Yet, a bad firmware could send data with a different size, which might
be bigger than the allocated memory, causing an OOPS:
Unable to handle kernel paging request at virtual address fff00000f9b40000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
Data abort info:
ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=000000008ba16000
[fff00000f9b40000] pgd=180000013ffff403, p4d=180000013fffe403, pud=180000013f85b403, pmd=180000013f68d403, pte=0000000000000000
Internal error: Oops: 0000000096000007 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 303 Comm: kworker/0:1 Not tainted 6.19.0-rc1-00002-gda407d200220 #34 PREEMPT
Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022
Workqueue: kacpi_notify acpi_os_execute_deferred
pstate: 214020c5 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : hex_dump_to_buffer+0x30c/0x4a0
lr : hex_dump_to_buffer+0x328/0x4a0
sp : ffff800080e13880
x29: ffff800080e13880 x28: ffffac9aba86f6a8 x27: 0000000000000083
x26: fff00000f9b3fffc x25: 0000000000000004 x24: 0000000000000004
x23: ffff800080e13905 x22: 0000000000000010 x21: 0000000000000083
x20: 0000000000000001 x19: 0000000000000008 x18: 0000000000000010
x17: 0000000000000001 x16: 00000007c7f20fec x15: 0000000000000020
x14: 0000000000000008 x13: 0000000000081020 x12: 0000000000000008
x11: ffff800080e13905 x10: ffff800080e13988 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000001 x6 : 0000000000000020
x5 : 0000000000000030 x4 : 00000000fffffffe x3 : 0000000000000000
x2 : ffffac9aba78c1c8 x1 : ffffac9aba76d0a8 x0 : 0000000000000008
Call trace:
hex_dump_to_buffer+0x30c/0x4a0 (P)
print_hex_dump+0xac/0x170
cper_estatus_print_section+0x90c/0x968
cper_estatus_print+0xf0/0x158
__ghes_print_estatus+0xa0/0x148
ghes_proc+0x1bc/0x220
ghes_notify_hed+0x5c/0xb8
notifier_call_chain+0x78/0x148
blocking_notifier_call_chain+0x4c/0x80
acpi_hed_notify+0x28/0x40
acpi_ev_notify_dispatch+0x50/0x80
acpi_os_execute_deferred+0x24/0x48
process_one_work+0x15c/0x3b0
worker_thread+0x2d0/0x400
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Code: 6b14033f 540001ad a94707e2 f100029f (b8747b44)
---[ end trace 0000000000000000 ]---
Prevent that by taking the actual allocated are into account when
checking for CPER length.
[ rjw: Subject tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Fix double destroy_workqueue on service rescan PCI path
While testing corner cases in the driver, a use-after-free crash
was found on the service rescan PCI path.
When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup()
destroys gc->service_wq. If the subsequent mana_gd_resume() fails
with -ETIMEDOUT or -EPROTO, the code falls through to
mana_serv_rescan() which triggers pci_stop_and_remove_bus_device().
This invokes the PCI .remove callback (mana_gd_remove), which calls
mana_gd_cleanup() a second time, attempting to destroy the already-
freed workqueue. Fix this by NULL-checking gc->service_wq in
mana_gd_cleanup() and setting it to NULL after destruction.
Call stack of issue for reference:
[Sat Feb 21 18:53:48 2026] Call Trace:
[Sat Feb 21 18:53:48 2026] <TASK>
[Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana]
[Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana]
[Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0
[Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70
[Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250
[Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20
[Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90
[Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30
[Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana]
[Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana]
[Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0
[Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0
[Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130
[Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30
[Sat Feb 21 18:53:48 2026] </TASK> |
