Export limit exceeded: 361192 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (361192 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53000 | 1 Linux | 1 Linux Kernel | 2026-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nat: use kfree_rcu to release ops Florian Westphal says: "Historically this is not an issue, even for normal base hooks: the data path doesn't use the original nf_hook_ops that are used to register the callbacks. However, in v5.14 I added the ability to dump the active netfilter hooks from userspace. This code will peek back into the nf_hook_ops that are available at the tail of the pointer-array blob used by the datapath. The nat hooks are special, because they are called indirectly from the central nat dispatcher hook. They are currently invisible to the nfnl hook dump subsystem though. But once that changes the nat ops structures have to be deferred too." Update nf_nat_register_fn() to deal with partial exposition of the hooks from error path which can be also an issue for nfnetlink_hook. | ||||
| CVE-2026-53026 | 1 Linux | 1 Linux Kernel | 2026-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: fix nfs4_file access extra count in nfsd4_add_rdaccess_to_wrdeleg In nfsd4_add_rdaccess_to_wrdeleg, if fp->fi_fds[O_RDONLY] is already set by another thread, __nfs4_file_get_access should not be called to increment the nfs4_file access count since that was already done by the thread that added READ access to the file. The extra fi_access count in nfs4_file can prevent the corresponding nfsd_file from being freed. When stopping nfs-server service, these extra access counts trigger a BUG in kmem_cache_destroy() that shows nfsd_file object remaining on __kmem_cache_shutdown. This problem can be reproduced by running the Git project's test suite over NFS. | ||||
| CVE-2026-53016 | 1 Linux | 1 Linux Kernel | 2026-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - copy IV using skcipher ivsize AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver. ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV buffer while RFC3686 skciphers expose an 8-byte IV, so the restore overruns the provided buffer. Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. | ||||
| CVE-2026-53021 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: core: Fix integer overflow in UNMAP bounds check sbc_execute_unmap() checks LBA + range does not exceed the device capacity, but does not guard against LBA + range wrapping around on 64-bit overflow. Add an overflow check matching the pattern already used for WRITE_SAME in the same file. | ||||
| CVE-2026-53003 | 1 Linux | 1 Linux Kernel | 2026-06-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pppoe: drop PFC frames RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT RECOMMENDED for PPPoE. In practice, pppd does not support negotiating PFC for PPPoE sessions, and the current PPPoE driver assumes an uncompressed (2-byte) protocol field. However, the generic PPP layer function ppp_input() is not aware of the negotiation result, and still accepts PFC frames. If a peer with a broken implementation or an attacker sends a frame with a compressed (1-byte) protocol field, the subsequent PPP payload is shifted by one byte. This causes the network header to be 4-byte misaligned, which may trigger unaligned access exceptions on some architectures. To reduce the attack surface, drop PPPoE PFC frames. Introduce ppp_skb_is_compressed_proto() helper function to be used in both ppp_generic.c and pppoe.c to avoid open-coding. | ||||
| CVE-2026-53005 | 1 Linux | 1 Linux Kernel | 2026-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Drop all SCM attributes for SOCKMAP. SOCKMAP can hide inflight fd from AF_UNIX GC. When a socket in SOCKMAP receives skb with inflight fd, sk_psock_verdict_data_ready() looks up the mapped socket and enqueue skb to its psock->ingress_skb. Since neither the old nor the new GC can inspect the psock queue, the hidden skb leaks the inflight sockets. Note that this cannot be detected via kmemleak because inflight sockets are linked to a global list. In addition, SOCKMAP redirect breaks the Tarjan-based GC's assumption that unix_edge.successor is always alive, which is no longer true once skb is redirected, resulting in use-after-free below. [0] Moreover, SOCKMAP does not call scm_stat_del() properly, so unix_show_fdinfo() could report an incorrect fd count. sk_msg_recvmsg() does not support any SCM attributes in the first place. Let's drop all SCM attributes before passing skb to the SOCKMAP layer. [0]: BUG: KASAN: slab-use-after-free in unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251) Read of size 8 at addr ffff888125362670 by task kworker/56:1/496 CPU: 56 UID: 0 PID: 496 Comm: kworker/56:1 Not tainted 7.0.0-rc7-00263-gb9d8b856689d #3 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 Workqueue: events sk_psock_backlog Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:379) kasan_report (mm/kasan/report.c:597) unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251) unix_destroy_fpl (net/unix/garbage.c:317) unix_destruct_scm (./include/net/scm.h:80 ./include/net/scm.h:86 net/unix/af_unix.c:1976) sk_psock_backlog (./include/linux/skbuff.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258) </TASK> Allocated by task 955: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) __kasan_slab_alloc (mm/kasan/common.c:369) kmem_cache_alloc_noprof (mm/slub.c:4539) sk_prot_alloc (net/core/sock.c:2240) sk_alloc (net/core/sock.c:2301) unix_create1 (net/unix/af_unix.c:1099) unix_create (net/unix/af_unix.c:1169) __sock_create (net/socket.c:1606) __sys_socketpair (net/socket.c:1811) __x64_sys_socketpair (net/socket.c:1863 net/socket.c:1860 net/socket.c:1860) do_syscall_64 (arch/x86/entry/syscall_64.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 496: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kmem_cache_free (mm/slub.c:6165) __sk_destruct (net/core/sock.c:2282 net/core/sock.c:2384) sk_psock_destroy (./include/net/sock.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258) | ||||
| CVE-2026-53010 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb2_open during durable reconnect In smb2_open, the call to ksmbd_put_durable_fd(fp) drops the reference to the durable file descriptor early during the durable reconnect process. If an error occurs subsequently (eg, ksmbd_iov_pin_rsp fails) or a scavenger accesses the file, it leads to a use-after-free when accessing fp properties (eg fp->create_time). Move the single put to the end of the function below err_out2 so fp stays valid until smb2_open returns. | ||||
| CVE-2026-53011 | 1 Linux | 1 Linux Kernel | 2026-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: fix use-after-free in advance_sched() on schedule switch In advance_sched(), when should_change_schedules() returns true, switch_schedules() is called to promote the admin schedule to oper. switch_schedules() queues the old oper schedule for RCU freeing via call_rcu(), but 'next' still points into an entry of the old oper schedule. The subsequent 'next->end_time = end_time' and rcu_assign_pointer(q->current_entry, next) are use-after-free. Fix this by selecting 'next' from the new oper schedule immediately after switch_schedules(), and using its pre-calculated end_time. setup_first_end_time() sets the first entry's end_time to base_time + interval when the schedule is installed, so the value is already correct. The deleted 'end_time = sched_base_time(admin)' assignment was also harmful independently: it would overwrite the new first entry's pre-calculated end_time with just base_time. | ||||
| CVE-2026-52996 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix durable fd leak on ClientGUID mismatch in durable v2 open ksmbd_lookup_fd_cguid() returns a ksmbd_file with its refcount incremented via ksmbd_fp_get(). parse_durable_handle_context() in the DURABLE_REQ_V2 case properly releases this reference on every path inside the ClientGUID-match branch, either by calling ksmbd_put_durable_fd() or by transferring ownership to dh_info->fp for a successful reconnect. However, when an entry exists in the global file table with the same CreateGuid but a different ClientGUID, the code simply falls through to the new-open path without dropping the reference obtained from ksmbd_lookup_fd_cguid(). Per MS-SMB2 section 3.3.5.9.10 ("Handling the SMB2_CREATE_DURABLE_HANDLE_REQUEST_V2 Create Context"), the server MUST locate an Open whose Open.CreateGuid matches the request's CreateGuid AND whose Open.ClientGuid matches the ClientGuid of the connection that received the request. If no such Open is found, the server MUST continue with the normal open execution phase. A CreateGuid hit with a ClientGUID mismatch is therefore the "Open not found" case: proceeding with a new open is correct, but the reference obtained purely as a side effect of the lookup must not be leaked. Repeated requests that hit this mismatch pin global_ft entries, prevent __ksmbd_close_fd() from ever running for the corresponding files, and defeat the durable scavenger, leading to long-lived resource leaks. Release the reference in the mismatch path and clear dh_info->fp so subsequent logic does not mistake a non-matching lookup result for a reconnect target. | ||||
| CVE-2026-52998 | 1 Linux | 1 Linux Kernel | 2026-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check The nf_osf_ttl() function accessed skb->dev to perform a local interface address lookup without verifying that the device pointer was valid. Additionally, the implementation utilized an in_dev_for_each_ifa_rcu loop to match the packet source address against local interface addresses. It assumed that packets from the same subnet should not see a decrement on the initial TTL. A packet might appear it is from the same subnet but it actually isn't especially in modern environments with containers and virtual switching. Remove the device dereference and interface loop. Replace the logic with a switch statement that evaluates the TTL according to the ttl_check. | ||||
| CVE-2025-8106 | 2026-06-24 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-52983 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: fix BQL imbalance in TX path Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight packets are accounted only for the AIROHA_NUM_TX_RING netdev TX queues. The queue index is computed as: qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx) txq = netdev_get_tx_queue(dev, qid); However, airoha_qdma_tx_napi_poll() accounts completions across all netdev TX queues (num_tx_queues), leading to inconsistent BQL accounting. Also reset all netdev TX queues in the ndo_stop callback. | ||||
| CVE-2026-52992 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/adfs: validate nzones in adfs_validate_bblk() Reject ADFS disc records with a zero zone count during boot block validation, before the disc record is used. When nzones is 0, adfs_read_map() passes it to kmalloc_array(0, ...) which returns ZERO_SIZE_PTR, and adfs_map_layout() then writes to dm[-1], causing an out-of-bounds write before the allocated buffer. adfs_validate_dr0() already rejects nzones != 1 for old-format images. Add the equivalent check to adfs_validate_bblk() for new-format images so that a crafted image with nzones == 0 is rejected at probe time. Found by syzkaller. | ||||
| CVE-2026-53022 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: bound enumeration string aggregation populate_enum_data() aggregates firmware-provided value-modifier and possible-value strings into fixed 512-byte struct members. The current code bounds each individual source string but then appends every string and separator with raw strcat() and no remaining-space check. Switch the aggregation loops to a bounded append helper and reject enumeration packages whose combined strings do not fit in the destination buffers. [ij: add include] | ||||
| CVE-2026-53063 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm cache: fix write hang in passthrough mode The invalidate_remove() function has incomplete logic for handling write hit bios after cache invalidation. It sets up the remapping for the overwrite_bio but then drops it immediately without submission, causing write operations to hang. Fix by adding a new invalidate_committed() continuation that submits the remapped writes to the cache origin after metadata commit completes, while using the overwrite_endio hook to ensure proper completion sequencing. This maintains existing coherency. Also improve error handling in invalidate_complete() to preserve the original error status instead of using bio_io_error() unconditionally. | ||||
| CVE-2026-53077 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: Restrict use of RDS/IB to the initial network namespace Prevent using RDS/IB in network namespaces other than the initial one. The existing RDS/IB code will not work properly in non-initial network namespaces. | ||||
| CVE-2026-53008 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix race condition in TX timestamp ring cleanup Fix a race condition between ice_free_tx_tstamp_ring() and ice_tx_map() that can cause a NULL pointer dereference. ice_free_tx_tstamp_ring currently clears the ICE_TX_FLAGS_TXTIME flag after NULLing the tstamp_ring. This could allow a concurrent ice_tx_map call on another CPU to dereference the tstamp_ring, which could lead to a NULL pointer dereference. CPU A:ice_free_tx_tstamp_ring() | CPU B:ice_tx_map() --------------------------------|--------------------------------- tx_ring->tstamp_ring = NULL | | ice_is_txtime_cfg() -> true | tstamp_ring = tx_ring->tstamp_ring | tstamp_ring->count // NULL deref! flags &= ~ICE_TX_FLAGS_TXTIME | Fix by: 1. Reordering ice_free_tx_tstamp_ring() to clear the flag before NULLing the pointer, with smp_wmb() to ensure proper ordering. 2. Adding smp_rmb() in ice_tx_map() after the flag check to order the flag read before the pointer read, using READ_ONCE() for the pointer, and adding a NULL check as a safety net. 3. Converting tx_ring->flags from u8 to DECLARE_BITMAP() and using atomic bitops (set_bit(), clear_bit(), test_bit()) for all flag operations throughout the driver: - ICE_TX_RING_FLAGS_XDP - ICE_TX_RING_FLAGS_VLAN_L2TAG1 - ICE_TX_RING_FLAGS_VLAN_L2TAG2 - ICE_TX_RING_FLAGS_TXTIME | ||||
| CVE-2026-57288 | 1 Jenkins Project | 1 Jenkins Active Directory Plugin | 2026-06-24 | 3.7 Low |
| Jenkins Active Directory Plugin 2.41.1 and earlier does not escape the user name before building the LDAP search filter in the Windows native (ADSI) authentication path, allowing unauthenticated attackers to inject LDAP wildcard characters to enumerate directory entries and to authenticate as a matching user whose password they know without knowing their exact user name. | ||||
| CVE-2026-57303 | 1 Jenkins Project | 1 Jenkins Assembla Plugin | 2026-06-24 | 7.1 High |
| Jenkins Assembla Plugin 1.4 and earlier does not configure its XML parser to prevent XML external entity (XXE) attacks, allowing attackers able to control the responses of the configured Assembla server to extract secrets from the Jenkins controller or perform server-side request forgery. | ||||
| CVE-2026-52972 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Cap AEAD AD length to 0x80000000 In order to prevent arithmetic overflows when checking the TX buffer size, cap the associated data length to 0x80000000. | ||||