| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: virtio_pmem: refcount requests for token lifetime
KASAN reports slab-use-after-free in __wake_up_common():
BUG: KASAN: slab-use-after-free in __wake_up_common+0x114/0x160
Read of size 8 at addr ffff88810fdcb710 by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted
6.19.0-next-20260220-00006-g1eae5f204ec3 #4 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux
1.17.0-2-2 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x6d/0xb0
print_report+0x170/0x4e2
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __virt_addr_valid+0x1dc/0x380
kasan_report+0xbc/0xf0
? __wake_up_common+0x114/0x160
? __wake_up_common+0x114/0x160
__wake_up_common+0x114/0x160
? __pfx__raw_spin_lock_irqsave+0x10/0x10
__wake_up+0x36/0x60
virtio_pmem_host_ack+0x11d/0x3b0
? sched_balance_domains+0x29f/0xb00
? __pfx_virtio_pmem_host_ack+0x10/0x10
? _raw_spin_lock_irqsave+0x98/0x100
? __pfx__raw_spin_lock_irqsave+0x10/0x10
vring_interrupt+0x1c9/0x5e0
? __pfx_vp_interrupt+0x10/0x10
vp_vring_interrupt+0x87/0x100
? __pfx_vp_interrupt+0x10/0x10
__handle_irq_event_percpu+0x17f/0x550
? __pfx__raw_spin_lock+0x10/0x10
handle_irq_event+0xab/0x1c0
handle_fasteoi_irq+0x276/0xae0
__common_interrupt+0x65/0x130
common_interrupt+0x78/0xa0
</IRQ>
virtio_pmem_host_ack() wakes a request that has already been freed by the
submitter.
This happens when the request token is still reachable via the virtqueue,
but virtio_pmem_flush() returns and frees it.
Fix the token lifetime by refcounting struct virtio_pmem_request.
virtio_pmem_flush() holds a submitter reference, and the virtqueue holds an
extra reference once the request is queued. The completion path drops the
virtqueue reference, and the submitter drops its reference before
returning. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: avoid CRC corruption due to parallel claim add
batadv_bla_add_claim() is used to add claims and modify the backbone of
claims for CLAIM frames from remote backbones and local packets. When it
handles a claim, it needs to either
* add the new claim's CRC to the backbone CRC
* remove the already existing claim's CRC from the old backbone and add it
to the new backbone
But when the "new" claim code was running in parallel to the "change
backbone" code, it can happen that the CRC was invalid because the
backbone_gw of the claim was changed twice in the "new" claim code path:
* CPU0 creates the claim for gateway A and publishes it in the claim
hash. The crc16 of the address has not yet been added to A's crc at
this point.
* CPU1 processes a claim frame of gateway B for the same client, finds
the just published claim, and performs the ownership change: it
switches the pointer to B, removes the crc16 from A's crc - which
never contained it - and adds it to B's crc.
* CPU0 continues behind the creation branch, unconditionally switches
the pointer back to A without compensating B's crc (its remove_crc
is false for the creation path), and finally adds the crc16 to A's
crc
The CRC is then wrong for both:
* claim belongs to A: but CRC is not part of backbone A's CRC
* claim doesn't belong to B: CRC is still part of backbone B's CRC
This wrong CRC is never recomputated from the stored claims. For local
backbone claims, this can also not recovered using syncs.
To avoid this, split the functionality in clear separate parts:
* new claim which always adds claim CRC to the backbone CRC (but never
changes the already set backbone_gw of the claim back)
* update of existing claim which automatically changes the backbone_gw
entry and only updates both backbone CRCs when there was an actual change |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: quiesce input in hid_hw_stop() to prevent use-after-free
A driver's probe calls hid_device_io_start() to enable input delivery,
then fails at a later initialization step and unwinds via hid_hw_stop().
The unwind frees struct hidraw via hidraw_disconnect() while in-flight
HID reports may still be running on another CPU, dereferencing the
freed object through hidraw_report_event(). syzbot reports the
resulting use-after-free for the corsair-psu HID driver.
Edward Adam Davis posted a per-driver fix for corsair-psu that adds
an explicit hid_device_io_stop() before hid_hw_stop() in the probe
error path ("hwmon: prevent packets from going to driver for probe",
2026-04-28). Auditing the tree shows 15 drivers call
hid_device_io_start(); 7 also call hid_device_io_stop() and 8 do not:
drivers calling hid_device_io_start() without a matching
hid_device_io_stop() before hid_hw_stop():
drivers/hwmon/corsair-psu.c (fix posted by Edward)
drivers/hwmon/corsair-cpro.c
drivers/hwmon/nzxt-kraken3.c
drivers/hwmon/nzxt-smart2.c
drivers/hwmon/gigabyte_waterforce.c
drivers/hid/hid-logitech-dj.c
drivers/hid/hid-nintendo.c
drivers/hid/hid-mcp2221.c
Roughly half of all callers of the API are exposed. Centralize the
quiesce in hid_hw_stop() so callers do not have to remember the
matching stop: if a driver has left hdev->io_started true on entry,
call hid_device_io_stop() before hid_disconnect().
For the 7 drivers that already call hid_device_io_stop() correctly,
hdev->io_started is false on entry, the guard short-circuits, and
behavior is unchanged.
No Fixes: tag because the affected drivers gained their
hid_device_io_start() calls independently over years; the bug is a
class-wide API misuse rather than a regression from one commit. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: Reject out-of-bounds PD cap count
cros_typec_register_partner_pdos() copies the partner PDOs from the EC
TYPEC_STATUS response into the fixed caps_desc.pdo[PDO_MAX_OBJECTS] array.
memcpy(caps_desc.pdo, resp->source_cap_pdos,
sizeof(u32) * resp->source_cap_count);
...
memcpy(caps_desc.pdo, resp->sink_cap_pdos,
sizeof(u32) * resp->sink_cap_count);
PDO_MAX_OBJECTS is 7. source_cap_count and sink_cap_count are u8 fields
from the EC. The only check is that they are not both zero. If either is
larger than 7, the memcpy writes past the end of the array on the stack.
A count of 255 overflows it by about 1 KB. The EC source arrays are only
seven entries wide. A larger count reads past them too.
The ChromeOS EC firmware caps these counts today, so a compliant setup
does not hit this. The kernel should still validate these values rather
than trust them.
Validate the counts in cros_typec_register_partner_pdos() next to the
memcpy. Skip the PDO registration if either count is above PDO_MAX_OBJECTS.
The rest of cros_typec_handle_status() still runs so events are handled
and cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate seg_id fields from persistent memory
cache_pos_decode(), cache_key_decode() and the last-kset branches of
cache_replay(), the writeback worker and the GC worker take a cache
segment id from the cache device metadata and index cache->segments[]
with it without checking it against cache->n_segs. That metadata is only
CRC-protected with a fixed public seed, so whoever supplies the cache
device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range
value forms a wild pcache_cache_segment pointer that is dereferenced and
written through -- an out-of-bounds read and write driven by on-disk data.
Add cache_seg_id_valid() and reject an out-of-range id at each decode
site, failing the operation with -EIO instead of indexing past the array.
Bound the id against the initialized-segment count (cache_info.n_segs)
rather than the physical device total. A forged cache_info.n_segs below
seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed
structs whose data pointer is NULL, so a forged id in that window would
still be dereferenced. A later patch guarantees cache_info.n_segs <=
seg_num, and a driver-created cache sets the two equal, so valid images
are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers
Fix a race condition in AXIDMA and MCDMA irq handlers where the channel
could be incorrectly marked as idle and attempt spurious transfers when
descriptors are still being processed.
The issue occurs when:
1. Multiple descriptors are queued and active.
2. An interrupt fires after completing some descriptors.
3. xilinx_dma_complete_descriptor() moves completed descriptors to
done_list.
4. Channel is marked idle and start_transfer() is called even though
active_list still contains unprocessed descriptors.
5. This leads to premature transfer attempts and potential descriptor
corruption or missed completions.
Only mark the channel as idle and start new transfers when the active list
is actually empty, ensuring proper channel state management and avoiding
spurious transfer attempts. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Avoid reprocessing the current packet after the QP enters the error state
When do_complete() finds the QP in the error state it returns
RESPST_CHK_RESOURCE. Before commit 49dc9c1f0c7e ("RDMA/rxe: Cleanup
reset state handling in rxe_resp.c") this was the flush loop:
check_resource() had an error-state branch that fetched each remaining
recv WQE and completed it with IB_WC_WR_FLUSH_ERR, without touching
the current packet. That commit removed the error-state branch from
check_resource() (draining is now done at rxe_receiver() entry) but
kept the do_complete() error-state return.
As a result, when a QP moves to the error state while a packet is
being completed - e.g. an rdma_cm disconnect racing with receive
processing - the responder state machine loops back into the request
processing chain with the already-completed packet still in hand:
check_resource() fetches a fresh recv WQE, execute()/send_data_in()
copies the same packet payload again, do_complete() posts another
IB_WC_SUCCESS CQE (qp->resp.status is still 0), and control returns
to the error-state check. The loop re-executes the same packet once
per posted recv WQE (observed: ~1000 duplicate IB_WC_SUCCESS
completions of one SEND, one per ~8us, matching the RQ occupancy)
until the RQ is exhausted, after which qp->resp.wqe is NULL and
send_data_in() dereferences it:
BUG: kernel NULL pointer dereference, address: 0000000000000014
Workqueue: rxe_wq do_work
RIP: copy_data+0x29/0x1f0
Call Trace:
send_data_in+0x25/0x50
rxe_receiver+0xf36/0x1dd0
The duplicate completions are indistinguishable from real receives to
the ULP. During an rds stress test, the message was accepted as new and
delivered the same datagram to user space hundreds of times, corrupting
the stream; any ULP that relies on RC exactly-once delivery is affected.
A live packet reaching the error-state check in do_complete() has
been executed and completed exactly once and must be consumed, not
re-processed. Return RESPST_CLEANUP for it (dequeue and free); keep
returning RESPST_CHK_RESOURCE for the pkt == NULL case. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Require a BPF cpumask for bpf_cpumask_populate()
bpf_cpumask_populate() writes to its destination with bitmap_copy(), but
the destination is typed as struct cpumask *. That allows the verifier to
accept borrowed cpumask pointers returned by read-only kfuncs, such as
scx_bpf_get_online_cpumask(), as a writable destination.
Make the destination a struct bpf_cpumask * so populate follows the same
ownership rule as the other mutating cpumask kfuncs. Query kfuncs continue
to accept const struct cpumask * inputs. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject arena frees below the arena base
bpf_arena_free_pages() accepts scalar arena addresses. The runtime
masks the address to the low 32 bits and reconstructs a full user
address from the arena base before returning the range to the arena
free tree.
When the scalar value is below the low 32 bits of the arena base,
full_uaddr falls below user_vm_start. The existing upper-end clipping
then turns this into an out-of-range free-tree offset. A later
allocation can reuse that offset and return an address below the arena
mapping.
Reject such frees before computing the clipped range. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in ib_destroy_cq_user()
When accessing a CQ via the netlink path the only synchronization
mechanism for the said CQ is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
ib_destroy_cq_user(), which is too late, since by that point
vendor-specific resources associated with the CQ might already be
freed. This can leave a short window where the CQ remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
ib_destroy_cq_user(), ensuring that the CQ is removed from restrack
before its internal resources are released. This guarantees that no new
users hold references to a CQ that is in the process of destruction.
In addition, this change preserves the intended inverted order
between create and destroy routines: resources are added to
restrack at the end of successful creation, and hence shall be removed
from the restrack first thing during the destruction flow, which keeps
the lifecycle management consistent and predictable. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: validate MADT IOAPIC entry bounds
The IOAPIC hotplug lookup parses both MADT and _MAT records directly.
The MADT walk previously used a subtable's declared length to advance
the cursor after only locating a generic header. The _MAT path likewise
passed a generic header to the IOAPIC helper.
Validate that a current record has a complete generic header, that its
declared length is contained in the available record range, and that a
typed IOAPIC record contains the full fixed IOAPIC body before reading
its fields. Use the same relation for both MADT and _MAT provider
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix UAF in ODP init error-handling path
rxe_odp_mr_init_user() stores &umem_odp->umem in mr->umem before
calling rxe_odp_init_pages(). If rxe_odp_init_pages() fails,
rxe_odp_mr_init_user() releases umem_odp and returns an error.
rxe_reg_user_mr() then unwinds the error through rxe_cleanup(),
rxe_mr_cleanup(), ib_umem_release(mr->umem). There is an
IS_ERR_OR_NULL(umem) check at the start of ib_umem_release().
But since mr->umem is NOT reset to NULL in the error handling
path of rxe_odp_mr_init_user(), the check passes and it reads
already-freed fields like umem->is_dmabuf, causing UAF.
Fix the UAF by clearing mr->umem after releasing the failed
ODP umem so the MR cleanup path does not release it again. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix ext PHY use-after-free on register error path
After mt7915_register_ext_phy() succeeded, a failure of the main PHY
mt7915_init_debugfs() or mt7915_coredump_register() unwound through
free_phy2, which called ieee80211_free_hw() on the ext PHY hw while it
was still registered with mac80211, since mt76_unregister_device() only
unregisters the main hw. Unregister the ext PHY (thermal + phy + hw)
first and skip the redundant free. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: complete object teardown when the destroy command fails
erdma_destroy_qp(), erdma_destroy_cq(), erdma_dereg_mr(), and
erdma_destroy_ah() returned early when erdma_post_cmd_wait() failed,
leaking the queue buffers, MTTs, doorbells and the STAG, QPN, CQN and AHN
identifiers. A command timeout clears ERDMA_CMDQ_STATE_OK_BIT and
permanently disables the command queue, so no retry can succeed; the RDMA
core keeps the object after a failed destructor and forced uverbs cleanup
then nulls the pointers, making the resources unreachable.
Warn on failure but release every software-owned resource and return
success, since during terminal destruction the hardware command result is
only diagnostic. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix RXDMAD_C buffer recycling race
The RXDMAD_C buffers come from the RRO data queues' page pools, which are
bound to a different NAPI, so the direct page-pool recycle used here could
race the owning NAPI; take the non-direct path as is already done for WED
RX queues. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma: Check atomic pool allocation result directly
The non-blocking, non-coherent allocation path uses dma_alloc_from_pool(),
which returns the allocated page and fills cpu_addr only on success.
Do not rely on cpu_addr to detect allocation failure in this path. Check
the returned page directly before using it for the IOMMU mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix stride mismatch in mac_phy_caps_parse()
Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the
mac_phy_caps buffer as tot_phy_id * len, where len is clamped to
min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent
memcpy() destination advances by sizeof(full struct) per slot via C
pointer arithmetic, not by the clamped len. When firmware sends short
TLVs, the second and later slots are written past the end of the
allocation.
The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the
buffer with full-struct pointer arithmetic, so the allocation must match
that stride.
Fix by using kzalloc_objs(), which derives the element size from the
pointer type, making allocation size and pointer stride provably
consistent regardless of what len the firmware provides.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Hold CQ references when processing EQ events
EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or
error callbacks outside the xarray lock. erdma_destroy_cq() can erase the
CQ from the xarray and free its queue buffer and doorbell record while a
previously scheduled EQ handler is still using the CQ.
Add a CQ refcount and take a reference under the xarray lock with
refcount_inc_not_zero(). Remove the CQ from the xarray before dropping
the destroy-path reference, then wait for in-flight EQ users before
releasing CQ resources. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix race between policy activation and blkg destruction
When switching an IO scheduler on a block device, blkcg_activate_policy()
allocates blkg_policy_data (pd) for all blkgs attached to the queue.
However, blkcg_activate_policy() may race with concurrent blkcg deletion,
leading to use-after-free and memory leak issues.
The use-after-free occurs in the following race:
T1 (blkcg_activate_policy):
- Successfully allocates pd for blkg1 (loop0->queue, blkcgA)
- Fails to allocate pd for blkg2 (loop0->queue, blkcgB)
- Enters the enomem rollback path to release blkg1 resources
T2 (blkcg deletion):
- blkcgA is deleted concurrently
- blkg1 is freed via blkg_free_workfn()
- blkg1->pd is freed
T1 (continued):
- Rollback path accesses blkg1->pd->online after pd is freed
- Triggers use-after-free
In addition, blkg_free_workfn() frees pd before removing the blkg from
q->blkg_list. This allows blkcg_activate_policy() to allocate a new pd
for a blkg that is being destroyed, leaving the newly allocated pd
unreachable when the blkg is finally freed.
Fix these races by extending blkcg_mutex coverage to serialize
blkcg_activate_policy() rollback and blkg destruction, ensuring pd
lifecycle is synchronized with blkg list visibility. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unlink TWT flow if the MCU rejects the agreement
The flow is added to dev->twt_list before sending the agreement to the
firmware, but the error path leaves it linked while flowid_mask is
never set. The flow slot can then be reused and memset while still on
the list, corrupting twt_list, and station removal leaves a dangling
entry behind that mt7915_mac_twt_sched_list_add() later walks. |
