| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.1, src/conf.c allocates heap memory proportional to n_devices, a count derived from libxml2 XPath evaluation of the config file, without first enforcing an upper bound. On 32-bit targets (armv7l, i686 -- both listed in the project Makefile), the multiplication n_devices * sizeof(t_pusb_device) wraps around size_t, causing xmalloc() to receive a very small size. Because xmalloc() only calls abort() on NULL return, a small-but-non-NULL allocation is accepted, and subsequent array writes overflow the heap. This vulnerability is fixed in 0.9.1. |
| OpenAMP v2025.10.0 ELF loader contains an integer overflow vulnerability in firmware image parsing. In elf_loader.c, it performs multiplication of two attacker-controlled 16-bit values from the ELF header without overflow checking. On 32-bit embedded systems (STM32MP1, Zynq, i.MX), large values can cause the product to wrap around to a small value. |
| When writing data larger than 4GB in a single Write call on an SSH channel, an integer overflow in the internal payload size calculation caused the write loop to spin indefinitely, sending empty packets without making progress. The size comparison now uses int64 to prevent truncation. |
| Integer overflow in the netsnmp_create_subtree_cache function in agent/snmp_agent.c in net-snmp 5.4 before 5.4.2.1, 5.3 before 5.3.2.3, and 5.2 before 5.2.5.1 allows remote attackers to cause a denial of service (crash) via a crafted SNMP GETBULK request, which triggers a heap-based buffer overflow, related to the number of responses or repeats. |
| An incorrectly placed cast from bytes to int allowed for server-side panic in the AES-GCM packet decoder for well-crafted inputs. |
| FastNetMon Community Edition through 1.2.9 contains an integer overflow in the BGP AS_PATH attribute encoder. In src/bgp_protocol.hpp, the IPv4UnicastAnnounce::get_attributes() function computes attribute_length as 'sizeof(bgp_as_path_segment_element_t) + this->as_path_asns.size() * sizeof(uint32_t)' and stores it in a uint8_t field (line 600-605). Since uint8_t can only hold values 0-255, an AS_PATH containing more than 63 ASNs (2 + 64*4 = 258 > 255) causes silent truncation. The truncated length is used for buffer sizing, while the actual data written is the full untruncated amount, resulting in a heap buffer overflow. Similarly, the path_segment_length field at line 621 is also uint8_t, truncating with more than 255 ASNs. |
| NewNTUnicodeString does not check for string length overflow. When provided with a string that overflows the maximum size of a NTUnicodeString (a 16-bit number of bytes), it returns a truncated string rather than an error. |
| Incorrect boundary conditions, integer overflow in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 150 and Thunderbird 150. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Hotspot). Supported versions that are affected are Oracle Java SE: 7u321, 8u311, 11.0.13, 17.0.1; Oracle GraalVM Enterprise Edition: 20.3.4 and 21.3.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability can also be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. CVSS 3.1 Base Score 5.3 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N). |
| FastNetMon Community Edition through 1.2.9 contains an integer overflow vulnerability in the packet capture buffer allocation. In src/packet_storage.hpp, the allocate_buffer() function computes memory_size_in_bytes as 'buffer_size_in_packets * (max_captured_packet_size + sizeof(fastnetmon_pcap_pkthdr_t)) + sizeof(fastnetmon_pcap_file_header_t)' using unsigned int (32-bit) arithmetic. With max_captured_packet_size=1500 and sizeof(fastnetmon_pcap_pkthdr_t)=16, each packet requires approximately 1516 bytes. If buffer_size_in_packets exceeds approximately 2,832,542, the multiplication overflows, resulting in a much smaller allocation than expected. Subsequent write_packet() calls then write past the allocated buffer, causing heap corruption. The buffer_size_in_packets value is derived from the ban_details_records_count configuration parameter, which is parsed using atoi() with no overflow checking. |
| smallbitvec is a growable bit-vector for Rust, optimized for size. From 1.0.1 to 2.6.0, an integer overflow in the internal capacity calculation of smallbitvec can lead to an undersized heap allocation, resulting in a heap buffer overflow through safe APIs only. This allows memory corruption without requiring unsafe code from the caller. This vulnerability is fixed in 2.6.1. |
| In Arm ArmNN through 2026-03-27, an integer overflow in TensorShape::GetNumElements() in armnn/Tensor.cpp allows a crafted TFLite model file to bypass buffer size validation and trigger a heap-based buffer over-read during model optimization. The overflow occurs when multiplying tensor dimensions using 32-bit unsigned arithmetic without overflow detection, causing GetNumBytes() to return an understated allocation size. During Optimize()->InferOutputShapes(), the BatchToSpaceNdLayer reads beyond the allocated buffer. |
| A flaw was found in Corosync. An integer overflow vulnerability in Corosync's join message sanity validation allows a remote, unauthenticated attacker to send crafted User Datagram Protocol (UDP) packets. This can cause the service to crash, leading to a denial of service. This vulnerability specifically affects Corosync deployments configured to use totemudp/totemudpu mode. |
| Kitty is a cross-platform GPU based terminal. In versions 0.46.2 and below, the handle_compose_command() function in kitty/graphics.c performs bounds validation on composition offsets using unsigned 32-bit arithmetic that is subject to integer wrapping, potentially leading to Heap Buffer Over-Read/Write. An attacker who can write escape sequences to a kitty terminal (e.g., via a malicious file, SSH login banner, or piped content) can supply crafted x_offset/y_offset values that pass the bounds check after wrapping but cause massive out-of-bounds heap memory access in compose_rectangles(). No user interaction is required. No non-default configuration is required. The attacker only needs the ability to produce output in a kitty terminal window. This issue has been fixed in version 0.47.0. |
| Integer overflow or wraparound in Microsoft Office allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Prevent ubuf size overflow
The ubuf size calculation may overflow, resulting in an undersized
allocation and possible memory corruption.
Use check_add_overflow() helpers to validate the size calculation before
allocation. |
| A potential security vulnerability has been identified in the HP Linux Imaging and Printing Software. This potential vulnerability may allow escalation of privileges and/or arbitrary code execution via an integer overflow in the hpcups processing path when handling crafted print data. |
| Rsync version 3.4.2 and prior contain an integer overflow vulnerability in the compressed-token decoder where a 32-bit signed counter is not checked for overflow, allowing a malicious sender to trigger an overflow that causes the receiver process to read and return data from outside the intended buffer bounds. Attackers can exploit this vulnerability to disclose process memory contents including environment variables, passwords, heap and stack data, and library memory pointers, significantly reducing ASLR effectiveness and facilitating further exploitation. |
| pgx is a PostgreSQL driver and toolkit for Go. SQL injection can occur if an attacker can cause a single query or bind message to exceed 4 GB in size. An integer overflow in the calculated message size can cause the one large message to be sent as multiple messages under the attacker's control. The problem is resolved in v4.18.2 and v5.5.4. As a workaround, reject user input large enough to cause a single query or bind message to exceed 4 GB in size. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()
This patch fixes an out-of-bounds access in ceph_handle_auth_reply()
that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In
ceph_handle_auth_reply(), the value of the payload_len field of such a
message is stored in a variable of type int. A value greater than
INT_MAX leads to an integer overflow and is interpreted as a negative
value. This leads to decrementing the pointer address by this value and
subsequently accessing it because ceph_decode_need() only checks that
the memory access does not exceed the end address of the allocation.
This patch fixes the issue by changing the data type of payload_len to
u32. Additionally, the data type of result_msg_len is changed to u32,
as it is also a variable holding a non-negative length.
Also, an additional layer of sanity checks is introduced, ensuring that
directly after reading it from the message, payload_len and
result_msg_len are not greater than the overall segment length.
BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph]
Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262
CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: ceph-msgr ceph_con_workfn [libceph]
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
print_report+0xd1/0x620
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? kasan_complete_mode_report_info+0x72/0x210
kasan_report+0xe7/0x130
? ceph_handle_auth_reply+0x642/0x7a0 [libceph]
? ceph_handle_auth_reply+0x642/0x7a0 [libceph]
__asan_report_load_n_noabort+0xf/0x20
ceph_handle_auth_reply+0x642/0x7a0 [libceph]
mon_dispatch+0x973/0x23d0 [libceph]
? apparmor_socket_recvmsg+0x6b/0xa0
? __pfx_mon_dispatch+0x10/0x10 [libceph]
? __kasan_check_write+0x14/0x30i
? mutex_unlock+0x7f/0xd0
? __pfx_mutex_unlock+0x10/0x10
? __pfx_do_recvmsg+0x10/0x10 [libceph]
ceph_con_process_message+0x1f1/0x650 [libceph]
process_message+0x1e/0x450 [libceph]
ceph_con_v2_try_read+0x2e48/0x6c80 [libceph]
? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph]
? save_fpregs_to_fpstate+0xb0/0x230
? raw_spin_rq_unlock+0x17/0xa0
? finish_task_switch.isra.0+0x13b/0x760
? __switch_to+0x385/0xda0
? __kasan_check_write+0x14/0x30
? mutex_lock+0x8d/0xe0
? __pfx_mutex_lock+0x10/0x10
ceph_con_workfn+0x248/0x10c0 [libceph]
process_one_work+0x629/0xf80
? __kasan_check_write+0x14/0x30
worker_thread+0x87f/0x1570
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx_try_to_wake_up+0x10/0x10
? kasan_print_address_stack_frame+0x1f7/0x280
? __pfx_worker_thread+0x10/0x10
kthread+0x396/0x830
? __pfx__raw_spin_lock_irq+0x10/0x10
? __pfx_kthread+0x10/0x10
? __kasan_check_write+0x14/0x30
? recalc_sigpending+0x180/0x210
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3f7/0x610
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x385/0xda0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
[ idryomov: replace if statements with ceph_decode_need() for
payload_len and result_msg_len ] |
